# Copyright (c) 2021 Project CHIP Authors
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# Auto-generated scripts for harness use only, please review before automation. The endpoints and cluster names are currently set to default

name: 14.2.3. [TC-SC-2.3] PASE Error Handling [DUT - Responder/Commissionee]

config:
    nodeId: 0x12344321
    cluster: "Basic"
    endpoint: 0

tests:
    - label:
          "TH generates and sends PBKDFParamRequest with an invalid passcodeID"
      verification: |
          Verify DUT receives the PBKDFParamRequest message.
      disabled: true

    - label: "DUT verifies the passcodeID."
      verification: |
          Verify that the DUT fails verification of the passcodeID and sends a status report to the TH with a FAILURE general code (value 1), protocol ID of SECURE_CHANNEL (0x0000), and Protocol code of INVALID_PARAMETER (0X0002). Verify that the DUT performs no further processing after sending the status report.
      disabled: true

    - label: "TH generates and sends PBKDFParamRequest with a valid passcodeID"
      verification: |
          Verify DUT receives the PBKDFParamRequest message.
      disabled: true

    - label: "DUT verifies the passcodeID."
      verification: |
          Verify that the DUT passes verification, then constructs and sends a PBKDFParamResponse message. Verify that the TH receives the message.
      disabled: true

    - label: "TH generates and sends Pake1"
      verification: |
          Verify DUT receives the Pake1 message.
      disabled: true

    - label: "DUT generates and sends Pake2"
      verification: |
          Verify TH receives the Pake2 message.
      disabled: true

    - label:
          "TH generates and sends Pake3 with an invalid key confirmation message
          (cA)"
      verification: |
          Verify DUT receives the Pake3 message.
      disabled: true

    - label: "DUT verifies Pake3.cA."
      verification: |
          Verify that the DUT fails verification and sends a status report to the TH with a FAILURE general code (value 1), protocol ID of SECURE_CHANNEL (0x0000), and Protocol code of INVALID_PARAMETER (0X0002). Verify that the DUT performs no further processing after sending the status report.
      disabled: true