| /* |
| * |
| * Copyright (c) 2022 Project CHIP Authors |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| // module headers |
| #import <Matter/Matter.h> |
| |
| #import "MTRDeviceTestDelegate.h" |
| #import "MTRErrorTestUtils.h" |
| #import "MTRTestCase+ServerAppRunner.h" |
| #import "MTRTestCase.h" |
| #import "MTRTestKeys.h" |
| #import "MTRTestResetCommissioneeHelper.h" |
| #import "MTRTestStorage.h" |
| |
| // system dependencies |
| #import <XCTest/XCTest.h> |
| |
| #if TARGET_OS_IPHONE || TARGET_OS_SIMULATOR |
| #define ENABLE_OTA_TESTS 0 |
| #else |
| #define ENABLE_OTA_TESTS 1 |
| #endif |
| |
| // TODO: Disable test005_DoBDXTransferAllowUpdateRequest, |
| // test006_DoBDXTransferWithTwoOTARequesters and |
| // test007_DoBDXTransferIncrementalOtaUpdate until PR #26040 is merged. |
| // Currently the poll interval causes delays in the BDX transfer and |
| // results in the test taking a long time. |
| #ifdef ENABLE_REAL_OTA_UPDATE_TESTS |
| #undef ENABLE_REAL_OTA_UPDATE_TESTS |
| #endif |
| |
| #if ENABLE_OTA_TESTS |
| |
| static const uint16_t kPairingTimeoutInSeconds = 10; |
| static const uint16_t kTimeoutInSeconds = 3; |
| static const uint16_t kTimeoutWithUpdateInSeconds = 60; |
| static const uint64_t kDeviceId1 = 0x12341234; |
| static const uint64_t kDeviceId2 = 0x12341235; |
| #ifdef ENABLE_REAL_OTA_UPDATE_TESTS |
| static const uint64_t kDeviceId3 = 0x12341236; |
| #endif // ENABLE_REAL_OTA_UPDATE_TESTS |
| // NOTE: These onboarding payloads are for the chip-ota-requestor-app, not chip-all-clusters-app |
| static NSString * kOnboardingPayload1 = @"MT:-24J0SO527K10648G00"; // Discriminator: 1111 |
| static NSString * kOnboardingPayload2 = @"MT:-24J0AFN00L10648G00"; // Discriminator: 1112 |
| #ifdef ENABLE_REAL_OTA_UPDATE_TESTS |
| static NSString * kOnboardingPayload3 = @"MT:-24J0IRV01L10648G00"; // Discriminator: 1113 |
| #endif // ENABLE_REAL_OTA_UPDATE_TESTS |
| |
| static const uint16_t kLocalPort = 5541; |
| static const uint16_t kTestVendorId = 0xFFF1u; |
| static const uint16_t kOTAProviderEndpointId = 0; |
| |
| static MTRDeviceController * sController = nil; |
| |
| static NSNumber * kUpdatedSoftwareVersion_5 = @5; |
| |
| static NSString * kUpdatedSoftwareVersionString_5 = @"5.0"; |
| |
| static NSNumber * kUpdatedSoftwareVersion_10 = @10; |
| |
| static NSString * kUpdatedSoftwareVersionString_10 = @"10.0"; |
| |
| @interface MTROTAProviderTests : MTRTestCase |
| - (NSString *)createImageFromRawImage:(NSString *)rawImage withVersion:(NSNumber *)version; |
| - (MTRDevice *)commissionDeviceWithPayload:(NSString *)payloadString nodeID:(NSNumber *)nodeID; |
| @end |
| |
| @interface MTROTARequestorAppRunner : NSObject |
| @property (nonatomic, copy) NSString * downloadFilePath; |
| |
| - (instancetype)initWithPayload:(NSString *)payload testcase:(MTROTAProviderTests *)testcase; |
| - (MTRDevice *)commissionWithNodeID:(NSNumber *)nodeID; |
| @end |
| |
| @implementation MTROTARequestorAppRunner { |
| MTROTAProviderTests * _testcase; |
| NSString * _payload; |
| } |
| |
| - (MTRDevice *)commissionWithNodeID:(NSNumber *)nodeID |
| { |
| return [_testcase commissionDeviceWithPayload:_payload nodeID:nodeID]; |
| } |
| |
| - (instancetype)initWithPayload:(NSString *)payload testcase:(MTROTAProviderTests *)testcase |
| { |
| __auto_type * downloadFilePath = [NSString stringWithFormat:@"/tmp/chip-ota-requestor-downloaded-image%u", [MTROTAProviderTests nextUniqueIndex]]; |
| __auto_type * extraArguments = @[ |
| @"--otaDownloadPath", |
| downloadFilePath, |
| @"--autoApplyImage", |
| ]; |
| |
| BOOL started = [testcase startAppWithName:@"ota-requestor" arguments:extraArguments payload:payload]; |
| if (!started) { |
| return nil; |
| } |
| |
| _testcase = testcase; |
| _payload = payload; |
| _downloadFilePath = downloadFilePath; |
| |
| return self; |
| } |
| |
| @end |
| |
| @interface MTROTAProviderTestControllerDelegate : NSObject <MTRDeviceControllerDelegate> |
| @property (nonatomic, readonly) XCTestExpectation * expectation; |
| @property (nonatomic, readonly) NSNumber * commissioneeNodeID; |
| @end |
| |
| @implementation MTROTAProviderTestControllerDelegate |
| - (id)initWithExpectation:(XCTestExpectation *)expectation commissioneeNodeID:(NSNumber *)nodeID |
| { |
| self = [super init]; |
| if (self) { |
| _expectation = expectation; |
| _commissioneeNodeID = nodeID; |
| } |
| return self; |
| } |
| |
| - (void)controller:(MTRDeviceController *)controller commissioningSessionEstablishmentDone:(NSError * _Nullable)error |
| { |
| XCTAssertEqual(error.code, 0); |
| |
| NSError * commissionError = nil; |
| [sController commissionNodeWithID:self.commissioneeNodeID |
| commissioningParams:[[MTRCommissioningParameters alloc] init] |
| error:&commissionError]; |
| XCTAssertNil(commissionError); |
| |
| // Keep waiting for onCommissioningComplete |
| } |
| |
| - (void)controller:(MTRDeviceController *)controller commissioningComplete:(NSError *)error |
| { |
| XCTAssertEqual(error.code, 0); |
| [_expectation fulfill]; |
| _expectation = nil; |
| } |
| |
| @end |
| |
| typedef void (^QueryImageCompletion)( |
| MTROTASoftwareUpdateProviderClusterQueryImageResponseParams * _Nullable data, NSError * _Nullable error); |
| typedef void (^ApplyUpdateRequestCompletion)( |
| MTROTASoftwareUpdateProviderClusterApplyUpdateResponseParams * _Nullable data, NSError * _Nullable error); |
| typedef void (^BlockQueryCompletion)(NSData * _Nullable data, BOOL isEOF); |
| |
| typedef void (^QueryImageHandler)(NSNumber * nodeID, MTRDeviceController * controller, |
| MTROTASoftwareUpdateProviderClusterQueryImageParams * params, QueryImageCompletion completion); |
| typedef void (^ApplyUpdateRequestHandler)(NSNumber * nodeID, MTRDeviceController * controller, |
| MTROTASoftwareUpdateProviderClusterApplyUpdateRequestParams * params, ApplyUpdateRequestCompletion completion); |
| typedef void (^NotifyUpdateAppliedHandler)(NSNumber * nodeID, MTRDeviceController * controller, |
| MTROTASoftwareUpdateProviderClusterNotifyUpdateAppliedParams * params, MTRStatusCompletion completion); |
| typedef void (^BDXTransferBeginHandler)(NSNumber * nodeID, MTRDeviceController * controller, NSString * fileDesignator, |
| NSNumber * offset, MTRStatusCompletion completion); |
| typedef void (^BDXQueryHandler)(NSNumber * nodeID, MTRDeviceController * controller, NSNumber * blockSize, NSNumber * blockIndex, |
| NSNumber * bytesToSkip, BlockQueryCompletion completion); |
| typedef void (^BDXTransferEndHandler)(NSNumber * nodeID, MTRDeviceController * controller, NSError * _Nullable error); |
| |
| @interface MTROTAProviderDelegateImpl : NSObject <MTROTAProviderDelegate> |
| @property (nonatomic, nullable) QueryImageHandler queryImageHandler; |
| @property (nonatomic, nullable) ApplyUpdateRequestHandler applyUpdateRequestHandler; |
| @property (nonatomic, nullable) NotifyUpdateAppliedHandler notifyUpdateAppliedHandler; |
| @property (nonatomic, nullable) BDXTransferBeginHandler transferBeginHandler; |
| @property (nonatomic, nullable) BDXQueryHandler blockQueryHandler; |
| @property (nonatomic, nullable) BDXTransferEndHandler transferEndHandler; |
| @end |
| |
| @implementation MTROTAProviderDelegateImpl |
| - (void)handleQueryImageForNodeID:(NSNumber *)nodeID |
| controller:(MTRDeviceController *)controller |
| params:(MTROTASoftwareUpdateProviderClusterQueryImageParams *)params |
| completion:(QueryImageCompletion)completion |
| { |
| XCTAssertEqual(controller, sController); |
| |
| if (self.queryImageHandler) { |
| self.queryImageHandler(nodeID, controller, params, completion); |
| } else { |
| XCTFail(@"Unexpected attempt to query for an image"); |
| [self respondNotAvailableWithCompletion:completion]; |
| } |
| } |
| |
| - (void)handleApplyUpdateRequestForNodeID:(NSNumber *)nodeID |
| controller:(MTRDeviceController *)controller |
| params:(MTROTASoftwareUpdateProviderClusterApplyUpdateRequestParams *)params |
| completion:(ApplyUpdateRequestCompletion)completion |
| { |
| XCTAssertEqual(controller, sController); |
| |
| if (self.applyUpdateRequestHandler) { |
| self.applyUpdateRequestHandler(nodeID, controller, params, completion); |
| } else { |
| XCTFail(@"Unexpected attempt to apply an update"); |
| [self respondWithErrorToApplyUpdateRequestWithCompletion:completion]; |
| } |
| } |
| |
| - (void)handleNotifyUpdateAppliedForNodeID:(NSNumber *)nodeID |
| controller:(MTRDeviceController *)controller |
| params:(MTROTASoftwareUpdateProviderClusterNotifyUpdateAppliedParams *)params |
| completion:(MTRStatusCompletion)completion |
| { |
| XCTAssertEqual(controller, sController); |
| |
| if (self.notifyUpdateAppliedHandler) { |
| self.notifyUpdateAppliedHandler(nodeID, controller, params, completion); |
| } else { |
| XCTFail(@"Unexpected update application"); |
| [self respondErrorWithCompletion:completion]; |
| } |
| } |
| |
| - (void)handleBDXTransferSessionBeginForNodeID:(NSNumber *)nodeID |
| controller:(MTRDeviceController *)controller |
| fileDesignator:(NSString *)fileDesignator |
| offset:(NSNumber *)offset |
| completion:(MTRStatusCompletion)completion |
| { |
| XCTAssertEqual(controller, sController); |
| |
| if (self.transferBeginHandler) { |
| self.transferBeginHandler(nodeID, controller, fileDesignator, offset, completion); |
| } else { |
| XCTFail(@"Unexpected attempt to begin BDX transfer"); |
| [self respondErrorWithCompletion:completion]; |
| } |
| } |
| |
| - (void)handleBDXQueryForNodeID:(NSNumber *)nodeID |
| controller:(MTRDeviceController *)controller |
| blockSize:(NSNumber *)blockSize |
| blockIndex:(NSNumber *)blockIndex |
| bytesToSkip:(NSNumber *)bytesToSkip |
| completion:(BlockQueryCompletion)completion |
| { |
| XCTAssertEqual(controller, sController); |
| |
| if (self.blockQueryHandler) { |
| self.blockQueryHandler(nodeID, controller, blockSize, blockIndex, bytesToSkip, completion); |
| } else { |
| XCTFail(@"Unexpected attempt to get BDX block"); |
| completion(nil, YES); |
| } |
| } |
| |
| - (void)handleBDXTransferSessionEndForNodeID:(NSNumber *)nodeID |
| controller:(MTRDeviceController *)controller |
| error:(NSError * _Nullable)error |
| { |
| if (self.transferEndHandler) { |
| self.transferEndHandler(nodeID, controller, error); |
| } else { |
| XCTFail(@"Unexpected end of BDX transfer"); |
| } |
| } |
| |
| - (void)respondNotAvailableWithCompletion:(QueryImageCompletion)completion |
| { |
| __auto_type * responseParams = [[MTROTASoftwareUpdateProviderClusterQueryImageResponseParams alloc] init]; |
| responseParams.status = @(MTROTASoftwareUpdateProviderStatusNotAvailable); |
| completion(responseParams, nil); |
| } |
| |
| - (void)respondBusyWithDelay:(NSNumber *)delay completion:(QueryImageCompletion)completion |
| { |
| __auto_type * responseParams = [[MTROTASoftwareUpdateProviderClusterQueryImageResponseParams alloc] init]; |
| responseParams.status = @(MTROTASoftwareUpdateProviderStatusBusy); |
| responseParams.delayedActionTime = delay; |
| completion(responseParams, nil); |
| } |
| |
| - (void)respondAvailableWithDelay:(NSNumber *)delay |
| uri:(NSString *)uri |
| updateToken:(NSData *)updateToken |
| softwareVersion:(NSNumber *)softwareVersion |
| softwareVersionString:(NSString *)softwareVersionString |
| completion:(QueryImageCompletion)completion |
| { |
| __auto_type * responseParams = [[MTROTASoftwareUpdateProviderClusterQueryImageResponseParams alloc] init]; |
| responseParams.status = @(MTROTASoftwareUpdateProviderStatusUpdateAvailable); |
| responseParams.delayedActionTime = delay; |
| responseParams.imageURI = uri; |
| // TODO: Figure out whether we need better |
| // SoftwareVersion/SoftwareVersionString/UpdateToken bits. |
| responseParams.softwareVersion = softwareVersion; |
| responseParams.softwareVersionString = softwareVersionString; |
| responseParams.updateToken = updateToken; |
| completion(responseParams, nil); |
| } |
| |
| - (void)respondWithErrorToApplyUpdateRequestWithCompletion:(ApplyUpdateRequestCompletion)completion |
| { |
| [self respondErrorWithCompletion:^(NSError * _Nullable error) { |
| completion(nil, error); |
| }]; |
| } |
| |
| - (void)respondToApplyUpdateRequestWithAction:(MTROTASoftwareUpdateProviderApplyUpdateAction)action |
| completion:(ApplyUpdateRequestCompletion)completion |
| { |
| __auto_type * params = [[MTROTASoftwareUpdateProviderClusterApplyUpdateResponseParams alloc] init]; |
| params.action = @(action); |
| params.delayedActionTime = @(0); |
| completion(params, nil); |
| } |
| |
| - (void)respondErrorWithCompletion:(MTRStatusCompletion)completion |
| { |
| [self respondErrorWithCode:MTRErrorCodeGeneralError completion:completion]; |
| } |
| |
| - (void)respondErrorWithCode:(MTRErrorCode)code completion:(MTRStatusCompletion)completion |
| { |
| [self respondError:[NSError errorWithDomain:MTRErrorDomain code:code userInfo:nil] completion:completion]; |
| } |
| |
| - (void)respondError:(NSError *)error completion:(MTRStatusCompletion)completion |
| { |
| completion(error); |
| } |
| |
| - (void)respondSuccess:(MTRStatusCompletion)completion |
| { |
| completion(nil); |
| } |
| |
| - (NSData *)generateUpdateToken |
| { |
| const size_t dataSize = 16; |
| const size_t randomBytesAtOnce = sizeof(uint32_t); |
| XCTAssertEqual(dataSize % randomBytesAtOnce, 0); |
| NSMutableData * data = [NSMutableData dataWithCapacity:16]; |
| for (unsigned i = 0; i < dataSize / randomBytesAtOnce; ++i) { |
| uint32_t randomBytes = arc4random(); |
| [data appendBytes:&randomBytes length:randomBytesAtOnce]; |
| } |
| return [NSData dataWithData:data]; |
| } |
| |
| @end |
| |
| static MTROTAProviderDelegateImpl * sOTAProviderDelegate; |
| |
| /** |
| * Helper that, given a raw image, creates an image-with-header from it, drives |
| * a BDX transfer, etc. |
| */ |
| @interface MTROTAProviderTransferChecker : NSObject |
| |
| - (instancetype)initWithRawImagePath:(NSString *)rawImagePath |
| otaImageDownloadFilePath:(NSString *)otaImageDownloadFilePath |
| nodeID:(NSNumber *)nodeID |
| softwareVersion:(NSNumber *)softwareVersion |
| softwareVersionString:(NSString *)softwareVersionString |
| applyUpdateAction:(MTROTASoftwareUpdateProviderApplyUpdateAction)applyUpdateAction |
| testcase:(XCTestCase *)testcase; |
| |
| @property (nonatomic, readonly) XCTestExpectation * queryExpectation; |
| @property (nonatomic, readonly) XCTestExpectation * bdxBeginExpectation; |
| @property (nonatomic, readonly) XCTestExpectation * bdxQueryExpectation; |
| @property (nonatomic, readonly) XCTestExpectation * bdxEndExpectation; |
| @property (nonatomic, readonly) XCTestExpectation * applyUpdateRequestExpectation; |
| @property (nonatomic, readonly) XCTestExpectation * notifyUpdateAppliedExpectation; |
| @end |
| |
| @implementation MTROTAProviderTransferChecker |
| |
| - (instancetype)initWithRawImagePath:(NSString *)rawImagePath |
| otaImageDownloadFilePath:(NSString *)otaImageDownloadFilePath |
| nodeID:(NSNumber *)nodeID |
| softwareVersion:(NSNumber *)softwareVersion |
| softwareVersionString:(NSString *)softwareVersionString |
| applyUpdateAction:(MTROTASoftwareUpdateProviderApplyUpdateAction)applyUpdateAction |
| testcase:(MTROTAProviderTests *)testcase |
| { |
| if (!(self = [super init])) { |
| return nil; |
| } |
| |
| _queryExpectation = [testcase expectationWithDescription:@"handleQueryImageForNodeID called"]; |
| _bdxBeginExpectation = [testcase expectationWithDescription:@"handleBDXTransferSessionBeginForNodeID called"]; |
| _bdxQueryExpectation = [testcase expectationWithDescription:@"handleBDXQueryForNodeID called"]; |
| _bdxEndExpectation = [testcase expectationWithDescription:@"handleBDXTransferSessionEndForNodeID called"]; |
| _applyUpdateRequestExpectation = [testcase expectationWithDescription:@"handleApplyUpdateRequestForNodeID called"]; |
| _notifyUpdateAppliedExpectation = [testcase expectationWithDescription:@"handleNotifyUpdateAppliedForNodeID called"]; |
| |
| NSString * imagePath = [testcase createImageFromRawImage:rawImagePath withVersion:softwareVersion]; |
| |
| NSData * updateToken = [sOTAProviderDelegate generateUpdateToken]; |
| |
| __block NSFileHandle * readHandle; |
| __block uint64_t imageSize; |
| __block uint32_t lastBlockIndex = UINT32_MAX; |
| |
| sOTAProviderDelegate.queryImageHandler = ^(NSNumber * nodeID, MTRDeviceController * controller, |
| MTROTASoftwareUpdateProviderClusterQueryImageParams * params, QueryImageCompletion completion) { |
| XCTAssertEqualObjects(nodeID, nodeID); |
| XCTAssertEqual(controller, sController); |
| |
| sOTAProviderDelegate.queryImageHandler = nil; |
| [sOTAProviderDelegate respondAvailableWithDelay:@(0) |
| uri:imagePath |
| updateToken:updateToken |
| softwareVersion:softwareVersion |
| softwareVersionString:softwareVersionString |
| completion:completion]; |
| [self.queryExpectation fulfill]; |
| }; |
| sOTAProviderDelegate.transferBeginHandler = ^(NSNumber * nodeID, MTRDeviceController * controller, NSString * fileDesignator, |
| NSNumber * offset, MTRStatusCompletion completion) { |
| XCTAssertEqualObjects(nodeID, nodeID); |
| XCTAssertEqual(controller, sController); |
| XCTAssertEqualObjects(fileDesignator, imagePath); |
| XCTAssertEqualObjects(offset, @(0)); |
| |
| readHandle = [NSFileHandle fileHandleForReadingAtPath:fileDesignator]; |
| XCTAssertNotNil(readHandle); |
| |
| NSError * endSeekError; |
| XCTAssertTrue([readHandle seekToEndReturningOffset:&imageSize error:&endSeekError]); |
| XCTAssertNil(endSeekError); |
| |
| sOTAProviderDelegate.transferBeginHandler = nil; |
| [sOTAProviderDelegate respondSuccess:completion]; |
| [self.bdxBeginExpectation fulfill]; |
| }; |
| sOTAProviderDelegate.blockQueryHandler = ^(NSNumber * nodeID, MTRDeviceController * controller, NSNumber * blockSize, |
| NSNumber * blockIndex, NSNumber * bytesToSkip, BlockQueryCompletion completion) { |
| XCTAssertEqualObjects(nodeID, nodeID); |
| XCTAssertEqual(controller, sController); |
| XCTAssertEqualObjects(blockSize, @(1024)); // Seems to always be 1024. |
| XCTAssertEqualObjects(blockIndex, @(lastBlockIndex + 1)); |
| XCTAssertEqualObjects(bytesToSkip, @(0)); // Don't expect to see skips here. |
| // Make sure we actually end up with multiple blocks. |
| XCTAssertTrue(blockSize.unsignedLongLongValue < imageSize); |
| |
| XCTAssertNotNil(readHandle); |
| uint64_t offset = blockSize.unsignedLongLongValue * blockIndex.unsignedLongLongValue; |
| NSError * seekError = nil; |
| [readHandle seekToOffset:offset error:&seekError]; |
| XCTAssertNil(seekError); |
| |
| NSError * readError = nil; |
| NSData * data = [readHandle readDataUpToLength:blockSize.unsignedLongValue error:&readError]; |
| XCTAssertNil(readError); |
| XCTAssertNotNil(data); |
| |
| BOOL isEOF = offset + blockSize.unsignedLongValue >= imageSize; |
| |
| ++lastBlockIndex; |
| |
| if (isEOF) { |
| sOTAProviderDelegate.blockQueryHandler = nil; |
| } |
| |
| completion(data, isEOF); |
| |
| if (isEOF) { |
| [self.bdxQueryExpectation fulfill]; |
| } |
| }; |
| sOTAProviderDelegate.transferEndHandler = ^(NSNumber * nodeID, MTRDeviceController * controller, NSError * _Nullable error) { |
| XCTAssertEqualObjects(nodeID, nodeID); |
| XCTAssertEqual(controller, sController); |
| XCTAssertNil(error); |
| |
| sOTAProviderDelegate.transferEndHandler = nil; |
| [self.bdxEndExpectation fulfill]; |
| }; |
| sOTAProviderDelegate.applyUpdateRequestHandler = ^(NSNumber * nodeID, MTRDeviceController * controller, |
| MTROTASoftwareUpdateProviderClusterApplyUpdateRequestParams * params, ApplyUpdateRequestCompletion completion) { |
| XCTAssertEqualObjects(nodeID, nodeID); |
| XCTAssertEqual(controller, sController); |
| XCTAssertEqualObjects(params.updateToken, updateToken); |
| XCTAssertEqualObjects(params.newVersion, softwareVersion); |
| |
| XCTAssertTrue([[NSFileManager defaultManager] contentsEqualAtPath:rawImagePath andPath:otaImageDownloadFilePath]); |
| |
| sOTAProviderDelegate.applyUpdateRequestHandler = nil; |
| [sOTAProviderDelegate respondToApplyUpdateRequestWithAction:applyUpdateAction completion:completion]; |
| [self.applyUpdateRequestExpectation fulfill]; |
| }; |
| |
| if (applyUpdateAction == MTROTASoftwareUpdateProviderApplyUpdateActionProceed) { |
| sOTAProviderDelegate.notifyUpdateAppliedHandler = ^(NSNumber * nodeID, MTRDeviceController * controller, |
| MTROTASoftwareUpdateProviderClusterNotifyUpdateAppliedParams * params, MTRStatusCompletion completion) { |
| XCTAssertEqualObjects(nodeID, nodeID); |
| XCTAssertEqual(controller, sController); |
| XCTAssertEqualObjects(params.updateToken, updateToken); |
| XCTAssertEqualObjects(params.softwareVersion, softwareVersion); |
| |
| sOTAProviderDelegate.notifyUpdateAppliedHandler = nil; |
| [sOTAProviderDelegate respondSuccess:completion]; |
| [self.notifyUpdateAppliedExpectation fulfill]; |
| }; |
| } |
| |
| return self; |
| } |
| @end |
| |
| static BOOL sStackInitRan = NO; |
| static BOOL sNeedsStackShutdown = YES; |
| |
| @implementation MTROTAProviderTests { |
| NSMutableSet<NSNumber *> * _commissionedNodeIDs; |
| } |
| |
| + (void)tearDown |
| { |
| // Global teardown, runs once |
| if (sNeedsStackShutdown) { |
| // We don't need to worry about ResetCommissionee. If we get here, |
| // we're running only one of our test methods (using |
| // -only-testing:MatterTests/MTROTAProviderTests/testMethodName), since |
| // we did not run test999_TearDown. |
| [self shutdownStack]; |
| } |
| } |
| |
| - (void)setUp |
| { |
| // Per-test setup, runs before each test. |
| [super setUp]; |
| [self setContinueAfterFailure:NO]; |
| |
| if (sStackInitRan == NO) { |
| [self initStack]; |
| } |
| |
| _commissionedNodeIDs = [[NSMutableSet alloc] init]; |
| |
| XCTAssertNil(sOTAProviderDelegate.queryImageHandler); |
| XCTAssertNil(sOTAProviderDelegate.applyUpdateRequestHandler); |
| XCTAssertNil(sOTAProviderDelegate.notifyUpdateAppliedHandler); |
| XCTAssertNil(sOTAProviderDelegate.transferBeginHandler); |
| XCTAssertNil(sOTAProviderDelegate.blockQueryHandler); |
| XCTAssertNil(sOTAProviderDelegate.transferEndHandler); |
| |
| // Start a new controller for each test, with a new fabric. Otherwise |
| // reusing the same node id for our commissionee devices will cause us to |
| // try to reuse sessions in ways that fail. |
| __auto_type * testKeys = [[MTRTestKeys alloc] init]; |
| XCTAssertNotNil(testKeys); |
| |
| __auto_type * params = [[MTRDeviceControllerStartupParams alloc] initWithIPK:testKeys.ipk fabricID:@(1) nocSigner:testKeys]; |
| params.vendorID = @(kTestVendorId); |
| |
| MTRDeviceController * controller = [[MTRDeviceControllerFactory sharedInstance] createControllerOnNewFabric:params error:nil]; |
| XCTAssertNotNil(controller); |
| XCTAssertTrue([controller isRunning]); |
| |
| sController = controller; |
| } |
| |
| - (void)tearDown |
| { |
| for (NSNumber * nodeID in _commissionedNodeIDs) { |
| __auto_type * device = [MTRBaseDevice deviceWithNodeID:nodeID controller:sController]; |
| ResetCommissionee(device, dispatch_get_main_queue(), self, kTimeoutInSeconds); |
| } |
| |
| if (sController != nil) { |
| [sController shutdown]; |
| XCTAssertFalse([sController isRunning]); |
| sController = nil; |
| } |
| |
| // Per-test teardown, runs after each test. |
| [super tearDown]; |
| |
| // Reset all handlers so tests don't interfere with each other. |
| sOTAProviderDelegate.queryImageHandler = nil; |
| sOTAProviderDelegate.applyUpdateRequestHandler = nil; |
| sOTAProviderDelegate.notifyUpdateAppliedHandler = nil; |
| sOTAProviderDelegate.transferBeginHandler = nil; |
| sOTAProviderDelegate.blockQueryHandler = nil; |
| sOTAProviderDelegate.transferEndHandler = nil; |
| } |
| |
| - (MTRDevice *)commissionDeviceWithPayload:(NSString *)payloadString nodeID:(NSNumber *)nodeID |
| { |
| XCTestExpectation * expectation = |
| [self expectationWithDescription:[NSString stringWithFormat:@"Commissioning Complete for %@", nodeID]]; |
| __auto_type * deviceControllerDelegate = [[MTROTAProviderTestControllerDelegate alloc] initWithExpectation:expectation |
| commissioneeNodeID:nodeID]; |
| dispatch_queue_t callbackQueue = dispatch_queue_create("com.chip.device_controller_delegate", DISPATCH_QUEUE_SERIAL); |
| |
| [sController setDeviceControllerDelegate:deviceControllerDelegate queue:callbackQueue]; |
| |
| NSError * error; |
| __auto_type * payload = [MTRSetupPayload setupPayloadWithOnboardingPayload:payloadString error:&error]; |
| XCTAssertNotNil(payload); |
| XCTAssertNil(error); |
| |
| [sController setupCommissioningSessionWithPayload:payload newNodeID:nodeID error:&error]; |
| XCTAssertNil(error); |
| |
| [self waitForExpectations:@[ expectation ] timeout:kPairingTimeoutInSeconds]; |
| |
| [_commissionedNodeIDs addObject:nodeID]; |
| |
| return [MTRDevice deviceWithNodeID:nodeID controller:sController]; |
| } |
| |
| - (void)initStack |
| { |
| sStackInitRan = YES; |
| |
| __auto_type * factory = [MTRDeviceControllerFactory sharedInstance]; |
| XCTAssertNotNil(factory); |
| |
| __auto_type * storage = [[MTRTestStorage alloc] init]; |
| sOTAProviderDelegate = [[MTROTAProviderDelegateImpl alloc] init]; |
| |
| __auto_type * factoryParams = [[MTRDeviceControllerFactoryParams alloc] initWithStorage:storage]; |
| factoryParams.port = @(kLocalPort); |
| factoryParams.otaProviderDelegate = sOTAProviderDelegate; |
| factoryParams.shouldStartServer = YES; |
| |
| BOOL ok = [factory startControllerFactory:factoryParams error:nil]; |
| XCTAssertTrue(ok); |
| } |
| |
| + (void)shutdownStack |
| { |
| sNeedsStackShutdown = NO; |
| |
| [[MTRDeviceControllerFactory sharedInstance] stopControllerFactory]; |
| } |
| |
| /** |
| * Returns path to the raw image. |
| */ |
| - (NSString *)createRawImageWithVersion:(NSNumber *)version |
| { |
| NSTask * buildTask = [self createTaskForPath:@"scripts/examples/gn_build_example.sh"]; |
| NSString * objdir = |
| [self absolutePathFor:[NSString stringWithFormat:@"out/debug/ota-requestor-app-v%u", version.unsignedIntValue]]; |
| [buildTask setArguments:@[ |
| [self absolutePathFor:@"examples/ota-requestor-app/linux"], |
| objdir, |
| @"chip_config_network_layer_ble=false", |
| @"non_spec_compliant_ota_action_delay_floor=0", |
| [NSString stringWithFormat:@"chip_device_config_device_software_version=%u", version.unsignedIntValue], |
| [NSString stringWithFormat:@"chip_device_config_device_software_version_string=\"%u.0\"", version.unsignedIntValue], |
| ]]; |
| |
| [self runTask:buildTask]; |
| |
| NSString * sourcePath = [NSString pathWithComponents:@[ objdir, @"chip-ota-requestor-app" ]]; |
| NSString * destPath = [NSString stringWithFormat:@"/tmp/ota-raw-image-v%u", version.unsignedIntValue]; |
| |
| // We don't care about error on remove; the file might not be there. But if |
| // it _is_ there, we have to remove, or the copy will fail. |
| [[NSFileManager defaultManager] removeItemAtPath:destPath error:nil]; |
| |
| NSError * copyError; |
| BOOL ok = [[NSFileManager defaultManager] copyItemAtPath:sourcePath toPath:destPath error:©Error]; |
| XCTAssertNil(copyError); |
| XCTAssertTrue(ok); |
| |
| return destPath; |
| } |
| |
| /** |
| * Returns path to the created image. |
| */ |
| - (NSString *)createImageFromRawImage:(NSString *)rawImage withVersion:(NSNumber *)version |
| { |
| NSString * image = [rawImage stringByReplacingOccurrencesOfString:@"raw-image" withString:@"image"]; |
| |
| NSTask * task = [self createTaskForPath:@"src/app/ota_image_tool.py"]; |
| [task setArguments:@[ |
| @"create", @"-v", @"0xFFF1", @"-p", @"0x8001", @"-vn", version.stringValue, @"-vs", |
| [NSString stringWithFormat:@"%.1f", version.floatValue], @"-da", @"sha256", rawImage, image |
| ]]; |
| |
| [self runTask:task]; |
| |
| return image; |
| } |
| |
| - (void)test000_SetUp |
| { |
| // Nothing to do here; our setUp method handled this already. This test |
| // just exists to make the setup not look like it's happening inside other |
| // tests. |
| } |
| |
| - (XCTestExpectation *)announceProviderToDevice:(MTRDevice *)device |
| { |
| dispatch_queue_t queue = dispatch_get_main_queue(); |
| |
| XCTestExpectation * responseExpectation = |
| [self expectationWithDescription:[NSString stringWithFormat:@"AnnounceOTAProvider to %@ succeeded", device]]; |
| |
| __auto_type * params = [[MTROTASoftwareUpdateRequestorClusterAnnounceOTAProviderParams alloc] init]; |
| params.providerNodeID = [sController controllerNodeID]; |
| params.vendorID = @(kTestVendorId); |
| params.announcementReason = @(MTROTASoftwareUpdateRequestorAnnouncementReasonSimpleAnnouncement); |
| params.endpoint = @(kOTAProviderEndpointId); |
| |
| __auto_type * cluster = [[MTRClusterOTASoftwareUpdateRequestor alloc] initWithDevice:device endpointID:@(0) queue:queue]; |
| [cluster announceOTAProviderWithParams:params |
| expectedValues:nil |
| expectedValueInterval:nil |
| completion:^(NSError * _Nullable error) { |
| XCTAssertNil(error); |
| [responseExpectation fulfill]; |
| }]; |
| |
| return responseExpectation; |
| } |
| |
| - (void)test001_ReceiveQueryImageRequest_RespondUpdateNotAvailable |
| { |
| // Test that if we advertise ourselves as a provider we end up getting a |
| // QueryImage callbacks that we can respond to. |
| __auto_type * runner = [[MTROTARequestorAppRunner alloc] initWithPayload:kOnboardingPayload1 testcase:self]; |
| __auto_type * device = [runner commissionWithNodeID:@(kDeviceId1)]; |
| |
| XCTestExpectation * queryExpectation = [self expectationWithDescription:@"handleQueryImageForNodeID called"]; |
| sOTAProviderDelegate.queryImageHandler = ^(NSNumber * nodeID, MTRDeviceController * controller, |
| MTROTASoftwareUpdateProviderClusterQueryImageParams * params, QueryImageCompletion completion) { |
| XCTAssertEqualObjects(nodeID, @(kDeviceId1)); |
| XCTAssertEqual(controller, sController); |
| [sOTAProviderDelegate respondNotAvailableWithCompletion:completion]; |
| [queryExpectation fulfill]; |
| }; |
| |
| // Advertise ourselves as an OTA provider. |
| XCTestExpectation * announceResponseExpectation = [self announceProviderToDevice:device]; |
| |
| [self waitForExpectations:@[ queryExpectation, announceResponseExpectation ] timeout:kTimeoutInSeconds]; |
| |
| sOTAProviderDelegate.queryImageHandler = nil; |
| } |
| |
| - (void)test002_ReceiveTwoQueryImageRequests_RespondExplicitBusy |
| { |
| // Test that if we advertise ourselves as a provider and respond BUSY to |
| // QueryImage callback, then we get a second QueryImage callback later on |
| // that we can then respond to however we wish. |
| __auto_type * runner = [[MTROTARequestorAppRunner alloc] initWithPayload:kOnboardingPayload1 testcase:self]; |
| __auto_type * device = [runner commissionWithNodeID:@(kDeviceId1)]; |
| |
| XCTestExpectation * queryExpectation1 = [self expectationWithDescription:@"handleQueryImageForNodeID called first time"]; |
| XCTestExpectation * queryExpectation2 = [self expectationWithDescription:@"handleQueryImageForNodeID called second time"]; |
| const uint16_t busyDelay = 1; // 1 second |
| |
| __block QueryImageHandler handleSecondQuery; |
| sOTAProviderDelegate.queryImageHandler = ^(NSNumber * nodeID, MTRDeviceController * controller, |
| MTROTASoftwareUpdateProviderClusterQueryImageParams * params, QueryImageCompletion completion) { |
| sOTAProviderDelegate.queryImageHandler = handleSecondQuery; |
| XCTAssertEqualObjects(nodeID, @(kDeviceId1)); |
| XCTAssertEqual(controller, sController); |
| [sOTAProviderDelegate respondBusyWithDelay:@(busyDelay) completion:completion]; |
| [queryExpectation1 fulfill]; |
| }; |
| |
| handleSecondQuery = ^(NSNumber * nodeID, MTRDeviceController * controller, |
| MTROTASoftwareUpdateProviderClusterQueryImageParams * params, QueryImageCompletion completion) { |
| XCTAssertEqualObjects(nodeID, @(kDeviceId1)); |
| XCTAssertEqual(controller, sController); |
| [sOTAProviderDelegate respondNotAvailableWithCompletion:completion]; |
| [queryExpectation2 fulfill]; |
| }; |
| |
| // Advertise ourselves as an OTA provider. |
| XCTestExpectation * announceResponseExpectation = [self announceProviderToDevice:device]; |
| |
| // Make sure we get our queries in order. Give it a bit more time, because |
| // there will be a delay between the two queries. |
| [self waitForExpectations:@[ queryExpectation1, queryExpectation2 ] timeout:(kTimeoutInSeconds + busyDelay) enforceOrder:YES]; |
| |
| [self waitForExpectations:@[ announceResponseExpectation ] timeout:kTimeoutInSeconds]; |
| } |
| |
| - (void)test003_ReceiveQueryImageRequestWhileHandlingBDX_RespondImplicitBusy |
| { |
| // In this test we do the following: |
| // |
| // 1) Advertise ourselves to device1. |
| // 2) When device1 queries for an image, claim to have one. |
| // 3) When device1 tries to start a bdx transfer, stall it and advertise to device2. |
| // 4) When device2 queries for an image, claim to have one. Since we are |
| // in the middle of doing BDX with device1, this actually responds with Busy. |
| // 5) Error out of the device1 transfer. |
| // 6) Wait for device2 to query us again. |
| __auto_type * runner1 = [[MTROTARequestorAppRunner alloc] initWithPayload:kOnboardingPayload1 testcase:self]; |
| __auto_type * device1 = [runner1 commissionWithNodeID:@(kDeviceId1)]; |
| |
| __auto_type * runner2 = [[MTROTARequestorAppRunner alloc] initWithPayload:kOnboardingPayload2 testcase:self]; |
| __auto_type * device2 = [runner2 commissionWithNodeID:@(kDeviceId2)]; |
| |
| __block XCTestExpectation * announceResponseExpectation2; |
| XCTestExpectation * queryExpectation1 = [self expectationWithDescription:@"handleQueryImageForNodeID called first time"]; |
| XCTestExpectation * queryExpectation2 = [self expectationWithDescription:@"handleQueryImageForNodeID called second time"]; |
| XCTestExpectation * queryExpectation3 = [self expectationWithDescription:@"handleQueryImageForNodeID called third time"]; |
| XCTestExpectation * transferEndExpectation = [self expectationWithDescription:@"handleBDXTransferSessionEndForNodeID called"]; |
| |
| const uint16_t busyDelay = 1; // 1 second |
| NSString * fakeImageURI = @"No such image, really"; |
| |
| __block QueryImageHandler handleThirdQuery; |
| sOTAProviderDelegate.queryImageHandler = ^(NSNumber * nodeID, MTRDeviceController * controller, |
| MTROTASoftwareUpdateProviderClusterQueryImageParams * params, QueryImageCompletion completion) { |
| [queryExpectation1 fulfill]; |
| XCTAssertEqualObjects(nodeID, @(kDeviceId1)); |
| XCTAssertEqual(controller, sController); |
| [sOTAProviderDelegate respondAvailableWithDelay:@(0) |
| uri:fakeImageURI |
| updateToken:[sOTAProviderDelegate generateUpdateToken] |
| softwareVersion:kUpdatedSoftwareVersion_5 |
| softwareVersionString:kUpdatedSoftwareVersionString_5 |
| completion:completion]; |
| }; |
| sOTAProviderDelegate.transferBeginHandler = ^(NSNumber * nodeID, MTRDeviceController * controller, NSString * fileDesignator, |
| NSNumber * offset, MTRStatusCompletion outerCompletion) { |
| sOTAProviderDelegate.transferBeginHandler = nil; |
| // Now that we've begun a transfer, we expect to be told when it ends, even if it's due to an error |
| sOTAProviderDelegate.transferEndHandler = ^(NSNumber * nodeID, MTRDeviceController * controller, NSError * _Nullable error) { |
| [transferEndExpectation fulfill]; |
| sOTAProviderDelegate.transferEndHandler = nil; |
| XCTAssertEqualObjects(nodeID, @(kDeviceId1)); |
| XCTAssertIdentical(controller, sController); |
| XCTAssertNotNil(error); // we cancelled the transfer, so there should be an error |
| }; |
| |
| XCTAssertEqualObjects(nodeID, @(kDeviceId1)); |
| XCTAssertIdentical(controller, sController); |
| |
| // Don't actually respond until the second requestor has queried us for |
| // an image. We need to reset queryImageHandler here, so we can close |
| // over outerCompletion. |
| sOTAProviderDelegate.queryImageHandler = ^(NSNumber * nodeID, MTRDeviceController * controller, |
| MTROTASoftwareUpdateProviderClusterQueryImageParams * params, QueryImageCompletion innerCompletion) { |
| [queryExpectation2 fulfill]; |
| sOTAProviderDelegate.queryImageHandler = handleThirdQuery; |
| |
| XCTAssertEqualObjects(nodeID, @(kDeviceId2)); |
| XCTAssertIdentical(controller, sController); |
| |
| // We respond UpdateAvailable, but since we are in the middle of |
| // handling OTA for device1 we expect the requestor to get Busy and |
| // try again. |
| [sOTAProviderDelegate respondAvailableWithDelay:@(busyDelay) |
| uri:fakeImageURI |
| updateToken:[sOTAProviderDelegate generateUpdateToken] |
| softwareVersion:kUpdatedSoftwareVersion_5 |
| softwareVersionString:kUpdatedSoftwareVersionString_5 |
| completion:innerCompletion]; |
| |
| // Cancel the transfer with device1 |
| [sOTAProviderDelegate respondErrorWithCompletion:outerCompletion]; |
| }; |
| |
| announceResponseExpectation2 = [self announceProviderToDevice:device2]; |
| }; |
| |
| handleThirdQuery = ^(NSNumber * nodeID, MTRDeviceController * controller, |
| MTROTASoftwareUpdateProviderClusterQueryImageParams * params, QueryImageCompletion completion) { |
| [queryExpectation3 fulfill]; |
| XCTAssertEqualObjects(nodeID, @(kDeviceId2)); |
| XCTAssertIdentical(controller, sController); |
| |
| [sOTAProviderDelegate respondNotAvailableWithCompletion:completion]; |
| }; |
| |
| // Advertise ourselves as an OTA provider. |
| XCTestExpectation * announceResponseExpectation1 = [self announceProviderToDevice:device1]; |
| |
| // Make sure we get our queries in order. Give it a bit more time, because |
| // there will be a delay between the two queries. |
| [self waitForExpectations:@[ queryExpectation1, queryExpectation2, transferEndExpectation, queryExpectation3 ] |
| timeout:(kTimeoutInSeconds + busyDelay * 3) |
| enforceOrder:YES]; |
| |
| [self waitForExpectations:@[ announceResponseExpectation1, announceResponseExpectation2 ] timeout:kTimeoutInSeconds]; |
| } |
| |
| - (void)test004_DoBDXTransferDenyUpdateRequest |
| { |
| // In this test we do the following: |
| // |
| // 1) Create an actual image we can send to the device, with a valid header |
| // but garbage data. |
| // 2) Advertise ourselves to device. |
| // 3) When device queries for an image, claim to have one. |
| // 4) When device tries to start a bdx transfer, respond with success. |
| // 5) Send the data as the BDX transfer proceeds. |
| // 6) When device invokes ApplyUpdateRequest, respond with Discontinue so |
| // that the update does not actually proceed. |
| __auto_type * runner = [[MTROTARequestorAppRunner alloc] initWithPayload:kOnboardingPayload1 testcase:self]; |
| __auto_type * device = [runner commissionWithNodeID:@(kDeviceId1)]; |
| |
| // First, create an image. Make it at least 4096 bytes long, so we get |
| // multiple BDX blocks going. |
| const size_t rawImageSize = 4112; |
| NSData * rawImagePiece = [@"1234567890abcdef" dataUsingEncoding:NSUTF8StringEncoding]; |
| XCTAssertEqual(rawImageSize % rawImagePiece.length, 0); |
| NSMutableData * fakeImage = [NSMutableData dataWithCapacity:rawImageSize]; |
| while (fakeImage.length < rawImageSize) { |
| [fakeImage appendData:rawImagePiece]; |
| } |
| NSString * rawImagePath = @"/tmp/ota-test004-raw-image"; |
| |
| [[NSFileManager defaultManager] createFileAtPath:rawImagePath contents:fakeImage attributes:nil]; |
| |
| __auto_type * checker = |
| [[MTROTAProviderTransferChecker alloc] initWithRawImagePath:rawImagePath |
| otaImageDownloadFilePath:runner.downloadFilePath |
| nodeID:@(kDeviceId1) |
| softwareVersion:kUpdatedSoftwareVersion_5 |
| softwareVersionString:kUpdatedSoftwareVersionString_5 |
| applyUpdateAction:MTROTASoftwareUpdateProviderApplyUpdateActionDiscontinue |
| testcase:self]; |
| // We do not expect the update to actually be applied here. |
| checker.notifyUpdateAppliedExpectation.inverted = YES; |
| |
| // Advertise ourselves as an OTA provider. |
| XCTestExpectation * announceResponseExpectation = [self announceProviderToDevice:device]; |
| |
| // Make sure we get our callbacks in order. Give it a bit more time, because |
| // we want to allow time for the BDX download. |
| [self waitForExpectations:@[ checker.queryExpectation, checker.bdxBeginExpectation, checker.bdxQueryExpectation ] |
| timeout:(kTimeoutWithUpdateInSeconds) enforceOrder:YES]; |
| |
| // Nothing really defines the ordering of bdxEndExpectation and |
| // applyUpdateRequestExpectation with respect to each other, and nothing |
| // defines the ordering of announceResponseExpectation with respect to _any_ |
| // of the above expectations. |
| [self waitForExpectations:@[ checker.bdxEndExpectation, checker.applyUpdateRequestExpectation, announceResponseExpectation ] |
| timeout:kTimeoutInSeconds]; |
| |
| // We are not expecting checker.notifyUpdateAppliedExpectation to actually |
| // be called fulfilled, but we still need to wait on it here. Since we set |
| // inverted = YES, on it, this is basically a no-op, except for making |
| // XCTest not complain about unwaited expectations. |
| [self waitForExpectations:@[ checker.notifyUpdateAppliedExpectation ] timeout:kTimeoutInSeconds]; |
| } |
| |
| // TODO: Enable tests 005, 006 and 007 when PR #26040 is merged. Currently the poll interval causes delays in the BDX transfer |
| // and results in the tests taking a long time. With PR #26040 we eliminate the poll interval completely and hence the tests can run |
| // in a short time. |
| #ifdef ENABLE_REAL_OTA_UPDATE_TESTS |
| - (void)test005_DoBDXTransferAllowUpdateRequest |
| { |
| // In this test we do the following: |
| // |
| // 1) Check if the ota image file and raw image file required for this test exist. |
| // 2) Advertise ourselves to device. |
| // 3) When device queries for an image, pass the image path for the ota file generated beforehand as a pre-requisite |
| // 4) When device tries to start a bdx transfer, respond with success. |
| // 5) Send the data as the BDX transfer proceeds. |
| // 6) Confirm the downloaded ota image matches the raw image file that was generated before the test was run as a pre-requisite |
| // 7) When device invokes ApplyUpdateRequest, respond with Proceed so that the update proceeds |
| // 8) Wait for the app to restart and wait for the NotifyUpdateApplied message to confirm the app has updated to the new version |
| |
| NSString * otaRawImagePath = [self createRawImageWithVersion:kUpdatedSoftwareVersion_5]; |
| |
| // Check whether the ota raw image exists at otaRawImagePath |
| XCTAssertTrue([[NSFileManager defaultManager] fileExistsAtPath:otaRawImagePath]); |
| |
| __auto_type * runner = [[MTROTARequestorAppRunner alloc] initWithPayload:kOnboardingPayload1 testcase:self]; |
| __auto_type * device = [runner commissionWithNodeID:@(kDeviceId1)]; |
| |
| __auto_type * checker = |
| [[MTROTAProviderTransferChecker alloc] initWithRawImagePath:otaRawImagePath |
| otaImageDownloadFilePath:runner.downloadFilePath |
| nodeID:@(kDeviceId1) |
| softwareVersion:kUpdatedSoftwareVersion_5 |
| softwareVersionString:kUpdatedSoftwareVersionString_5 |
| applyUpdateAction:MTROTASoftwareUpdateProviderApplyUpdateActionProceed |
| testcase:self]; |
| |
| // Advertise ourselves as an OTA provider. |
| XCTestExpectation * announceResponseExpectation = [self announceProviderToDevice:device]; |
| |
| // Make sure we get our callbacks in order. Give it a bit more time, because |
| // we want to allow time for the BDX download. |
| [self waitForExpectations:@[ |
| checker.queryExpectation, checker.bdxBeginExpectation, checker.bdxQueryExpectation, checker.bdxEndExpectation |
| ] |
| timeout:(kTimeoutWithUpdateInSeconds) enforceOrder:YES]; |
| |
| // Nothing really defines the ordering of bdxEndExpectation and |
| // applyUpdateRequestExpectation with respect to each other. |
| [self waitForExpectations:@[ checker.applyUpdateRequestExpectation, checker.notifyUpdateAppliedExpectation ] |
| timeout:kTimeoutInSeconds |
| enforceOrder:YES]; |
| |
| // Nothing defines the ordering of announceResponseExpectation with respect |
| // to _any_ of the above expectations. |
| [self waitForExpectations:@[ announceResponseExpectation ] timeout:kTimeoutInSeconds]; |
| } |
| |
| - (void)test006_DoBDXTransferWithTwoOTARequesters |
| { |
| // In this test, we test BDX transfers between one provider and two OTA requestors device1 and device2. |
| // |
| // 1) We announce ourselves to device1 first. |
| // 2) When device1 queries, we return image available at imagePath1. |
| // 3) We set the BDX begin and end handlers for device1 and device1 starts the BDX transfer. |
| // 4) At this time, we announce ourselves to device2. |
| // 5) When device2 queries, we return image available with a busy delay of 30 secs. |
| // 6) When device1 completes the BDX transfer, we wait for device2 to query. |
| // 7) When device 2 queries again, we return image available at imagePath2. |
| // 8) We set the BDX begin and end handlers for device2 and device2 starts the BDX transfer. |
| // 9) Device1 applies the update independently and reboots with the new image. |
| // 10) At this point, we set the apply update handlers for device2. |
| // 11) Device2 applies the update and reboots with its new image. |
| |
| NSString * otaRawImagePath1 = [self createRawImageWithVersion:kUpdatedSoftwareVersion_10]; |
| NSString * otaRawImagePath2 = [self createRawImageWithVersion:kUpdatedSoftwareVersion_5]; |
| |
| // Check whether the ota raw image exists at otaRawImagePath1 and otaRawImagePath2 |
| XCTAssertTrue([[NSFileManager defaultManager] fileExistsAtPath:otaRawImagePath1]); |
| XCTAssertTrue([[NSFileManager defaultManager] fileExistsAtPath:otaRawImagePath2]); |
| |
| XCTestExpectation * queryExpectation1 = [self expectationWithDescription:@"handleQueryImageForNodeID called for device1"]; |
| XCTestExpectation * queryExpectation2 = |
| [self expectationWithDescription:@"handleQueryImageForNodeID called for device2 - busy"]; |
| XCTestExpectation * queryExpectation3 = |
| [self expectationWithDescription:@"handleQueryImageForNodeID called for device2 - available"]; |
| |
| XCTestExpectation * bdxBeginExpectation1 = |
| [self expectationWithDescription:@"handleBDXTransferSessionBeginForNodeID called for device1"]; |
| XCTestExpectation * bdxBeginExpectation2 = |
| [self expectationWithDescription:@"handleBDXTransferSessionBeginForNodeID called for device2"]; |
| |
| XCTestExpectation * bdxQueryExpectation1 = [self expectationWithDescription:@"handleBDXQueryForNodeID called for device1"]; |
| XCTestExpectation * bdxQueryExpectation2 = [self expectationWithDescription:@"handleBDXQueryForNodeID called for device2"]; |
| |
| XCTestExpectation * bdxEndExpectation1 = |
| [self expectationWithDescription:@"handleBDXTransferSessionEndForNodeID called for device1"]; |
| XCTestExpectation * bdxEndExpectation2 = |
| [self expectationWithDescription:@"handleBDXTransferSessionEndForNodeID called for device2"]; |
| |
| XCTestExpectation * applyUpdateRequestExpectation1 = |
| [self expectationWithDescription:@"handleApplyUpdateRequestForNodeID called for device1"]; |
| XCTestExpectation * applyUpdateRequestExpectation2 = |
| [self expectationWithDescription:@"handleApplyUpdateRequestForNodeID called for device2"]; |
| |
| XCTestExpectation * notifyUpdateAppliedExpectation1 = |
| [self expectationWithDescription:@"handleNotifyUpdateAppliedForNodeID called for device1"]; |
| XCTestExpectation * notifyUpdateAppliedExpectation2 = |
| [self expectationWithDescription:@"handleNotifyUpdateAppliedForNodeID called for device2"]; |
| |
| __block XCTestExpectation * announceResponseExpectation2; |
| |
| NSString * imagePath1 = [self createImageFromRawImage:otaRawImagePath1 withVersion:kUpdatedSoftwareVersion_10]; |
| NSString * imagePath2 = [self createImageFromRawImage:otaRawImagePath2 withVersion:kUpdatedSoftwareVersion_5]; |
| |
| NSData * updateToken1 = [sOTAProviderDelegate generateUpdateToken]; |
| NSData * updateToken2 = [sOTAProviderDelegate generateUpdateToken]; |
| |
| __block NSFileHandle * readHandle; |
| __block uint64_t imageSize; |
| __block uint32_t lastBlockIndex = UINT32_MAX; |
| const uint16_t busyDelay = 30; // 30 second |
| |
| __auto_type * runner1 = [[MTROTARequestorAppRunner alloc] initWithPayload:kOnboardingPayload1 testcase:self]; |
| __auto_type * device1 = [runner1 commissionWithNodeID:@(kDeviceId1)]; |
| |
| __auto_type * runner2 = [[MTROTARequestorAppRunner alloc] initWithPayload:kOnboardingPayload2 testcase:self]; |
| __auto_type * device2 = [runner2 commissionWithNodeID:@(kDeviceId2)]; |
| |
| // This to keep track of whether queryImageHandler for device 2 was called or not. The first time it's called we will |
| // fulfill queryExpectation2 and proceed with BDX for device 1. |
| __block bool firstQueryImageForDevice2Received = false; |
| |
| // Set up the query handler for device 1 to return image available at imagePath1 |
| sOTAProviderDelegate.queryImageHandler = ^(NSNumber * nodeID, MTRDeviceController * controller, |
| MTROTASoftwareUpdateProviderClusterQueryImageParams * params, QueryImageCompletion completion) { |
| XCTAssertEqualObjects(nodeID, @(kDeviceId1)); |
| XCTAssertEqual(controller, sController); |
| |
| sOTAProviderDelegate.queryImageHandler = nil; |
| [sOTAProviderDelegate respondAvailableWithDelay:@(0) |
| uri:imagePath1 |
| updateToken:updateToken1 |
| softwareVersion:kUpdatedSoftwareVersion_10 |
| softwareVersionString:kUpdatedSoftwareVersionString_10 |
| completion:completion]; |
| [queryExpectation1 fulfill]; |
| }; |
| |
| // Set up the BDX transfer begin, block query and transfer end handlers for device1 so it can go ahead with the BDX transfer |
| sOTAProviderDelegate.transferBeginHandler = ^(NSNumber * nodeID, MTRDeviceController * controller, NSString * fileDesignator, |
| NSNumber * offset, MTRStatusCompletion outerCompletion) { |
| XCTAssertEqualObjects(nodeID, @(kDeviceId1)); |
| XCTAssertEqual(controller, sController); |
| XCTAssertEqualObjects(fileDesignator, imagePath1); |
| XCTAssertEqualObjects(offset, @(0)); |
| |
| readHandle = [NSFileHandle fileHandleForReadingAtPath:fileDesignator]; |
| XCTAssertNotNil(readHandle); |
| |
| NSError * endSeekError; |
| XCTAssertTrue([readHandle seekToEndReturningOffset:&imageSize error:&endSeekError]); |
| XCTAssertNil(endSeekError); |
| sOTAProviderDelegate.transferBeginHandler = nil; |
| |
| // Don't actually respond until the second requestor has queried us for |
| // an image to ensure BDX for device1 starts only after device2 has queried us once. |
| |
| // Set up the query handler for device2 to return image available at imagePath2 but a busy delay of 30 secs |
| sOTAProviderDelegate.queryImageHandler = ^(NSNumber * nodeID, MTRDeviceController * controller, |
| MTROTASoftwareUpdateProviderClusterQueryImageParams * params, QueryImageCompletion innerCompletion) { |
| XCTAssertEqualObjects(nodeID, @(kDeviceId2)); |
| XCTAssertEqual(controller, sController); |
| |
| [sOTAProviderDelegate respondAvailableWithDelay:@(busyDelay) |
| uri:imagePath2 |
| updateToken:updateToken2 |
| softwareVersion:kUpdatedSoftwareVersion_5 |
| softwareVersionString:kUpdatedSoftwareVersionString_5 |
| completion:innerCompletion]; |
| if (!firstQueryImageForDevice2Received) { |
| [queryExpectation2 fulfill]; |
| |
| // Respond with success for the tranfer begin completion for device1 |
| [sOTAProviderDelegate respondSuccess:outerCompletion]; |
| [bdxBeginExpectation1 fulfill]; |
| } |
| firstQueryImageForDevice2Received = true; |
| }; |
| |
| // Announce ourselves to device2 |
| announceResponseExpectation2 = [self announceProviderToDevice:device2]; |
| }; |
| sOTAProviderDelegate.blockQueryHandler = ^(NSNumber * nodeID, MTRDeviceController * controller, NSNumber * blockSize, |
| NSNumber * blockIndex, NSNumber * bytesToSkip, BlockQueryCompletion completion) { |
| XCTAssertEqualObjects(nodeID, @(kDeviceId1)); |
| XCTAssertEqual(controller, sController); |
| XCTAssertEqualObjects(blockSize, @(1024)); // Seems to always be 1024. |
| XCTAssertEqualObjects(blockIndex, @(lastBlockIndex + 1)); |
| XCTAssertEqualObjects(bytesToSkip, @(0)); // Don't expect to see skips here. |
| // Make sure we actually end up with multiple blocks. |
| XCTAssertTrue(blockSize.unsignedLongLongValue < imageSize); |
| |
| XCTAssertNotNil(readHandle); |
| uint64_t offset = blockSize.unsignedLongLongValue * blockIndex.unsignedLongLongValue; |
| NSError * seekError = nil; |
| [readHandle seekToOffset:offset error:&seekError]; |
| XCTAssertNil(seekError); |
| |
| NSError * readError = nil; |
| NSData * data = [readHandle readDataUpToLength:blockSize.unsignedLongValue error:&readError]; |
| XCTAssertNil(readError); |
| XCTAssertNotNil(data); |
| |
| BOOL isEOF = offset + blockSize.unsignedLongValue >= imageSize; |
| |
| ++lastBlockIndex; |
| |
| if (isEOF) { |
| sOTAProviderDelegate.blockQueryHandler = nil; |
| } |
| |
| completion(data, isEOF); |
| |
| if (isEOF) { |
| [bdxQueryExpectation1 fulfill]; |
| } |
| }; |
| sOTAProviderDelegate.transferEndHandler = ^(NSNumber * nodeID, MTRDeviceController * controller, NSError * _Nullable error) { |
| XCTAssertEqualObjects(nodeID, @(kDeviceId1)); |
| XCTAssertEqual(controller, sController); |
| XCTAssertNil(error); |
| sOTAProviderDelegate.transferEndHandler = nil; |
| [bdxEndExpectation1 fulfill]; |
| |
| // BDX transfer with device1 has completed |
| // Set up the query handler for device2 to return image available at imagePath2 |
| sOTAProviderDelegate.queryImageHandler = ^(NSNumber * nodeID, MTRDeviceController * controller, |
| MTROTASoftwareUpdateProviderClusterQueryImageParams * params, QueryImageCompletion completion) { |
| XCTAssertEqualObjects(nodeID, @(kDeviceId2)); |
| XCTAssertEqual(controller, sController); |
| |
| sOTAProviderDelegate.queryImageHandler = nil; |
| [sOTAProviderDelegate respondAvailableWithDelay:@(0) |
| uri:imagePath2 |
| updateToken:updateToken2 |
| softwareVersion:kUpdatedSoftwareVersion_5 |
| softwareVersionString:kUpdatedSoftwareVersionString_5 |
| completion:completion]; |
| NSLog(@"OTA queryExpectation3"); |
| [queryExpectation3 fulfill]; |
| }; |
| |
| // Set up the BDX transfer begin, block query and transfer end handlers for device2 so it can go ahead with the BDX transfer |
| sOTAProviderDelegate.transferBeginHandler = ^(NSNumber * nodeID, MTRDeviceController * controller, |
| NSString * fileDesignator, NSNumber * offset, MTRStatusCompletion completion) { |
| XCTAssertEqualObjects(nodeID, @(kDeviceId2)); |
| XCTAssertEqual(controller, sController); |
| XCTAssertEqualObjects(fileDesignator, imagePath2); |
| XCTAssertEqualObjects(offset, @(0)); |
| |
| readHandle = [NSFileHandle fileHandleForReadingAtPath:fileDesignator]; |
| XCTAssertNotNil(readHandle); |
| |
| NSError * endSeekError; |
| XCTAssertTrue([readHandle seekToEndReturningOffset:&imageSize error:&endSeekError]); |
| XCTAssertNil(endSeekError); |
| sOTAProviderDelegate.transferBeginHandler = nil; |
| [sOTAProviderDelegate respondSuccess:completion]; |
| lastBlockIndex = UINT32_MAX; |
| [bdxBeginExpectation2 fulfill]; |
| }; |
| sOTAProviderDelegate.blockQueryHandler = ^(NSNumber * nodeID, MTRDeviceController * controller, NSNumber * blockSize, |
| NSNumber * blockIndex, NSNumber * bytesToSkip, BlockQueryCompletion completion) { |
| XCTAssertEqualObjects(nodeID, @(kDeviceId2)); |
| XCTAssertEqual(controller, sController); |
| XCTAssertEqualObjects(blockSize, @(1024)); // Seems to always be 1024. |
| XCTAssertEqualObjects(blockIndex, @(lastBlockIndex + 1)); |
| XCTAssertEqualObjects(bytesToSkip, @(0)); // Don't expect to see skips here. |
| // Make sure we actually end up with multiple blocks. |
| XCTAssertTrue(blockSize.unsignedLongLongValue < imageSize); |
| |
| XCTAssertNotNil(readHandle); |
| uint64_t offset = blockSize.unsignedLongLongValue * blockIndex.unsignedLongLongValue; |
| NSError * seekError = nil; |
| [readHandle seekToOffset:offset error:&seekError]; |
| XCTAssertNil(seekError); |
| |
| NSError * readError = nil; |
| NSData * data = [readHandle readDataUpToLength:blockSize.unsignedLongValue error:&readError]; |
| XCTAssertNil(readError); |
| XCTAssertNotNil(data); |
| |
| BOOL isEOF = offset + blockSize.unsignedLongValue >= imageSize; |
| |
| ++lastBlockIndex; |
| |
| if (isEOF) { |
| sOTAProviderDelegate.blockQueryHandler = nil; |
| } |
| |
| completion(data, isEOF); |
| |
| if (isEOF) { |
| [bdxQueryExpectation2 fulfill]; |
| } |
| }; |
| sOTAProviderDelegate.transferEndHandler |
| = ^(NSNumber * nodeID, MTRDeviceController * controller, NSError * _Nullable error) { |
| XCTAssertEqualObjects(nodeID, @(kDeviceId2)); |
| XCTAssertEqual(controller, sController); |
| XCTAssertNil(error); |
| sOTAProviderDelegate.transferEndHandler = nil; |
| [bdxEndExpectation2 fulfill]; |
| }; |
| }; |
| |
| // Flags to track if the applyUpdateRequest from both device1 and device2 has been handled. |
| __block bool device1HasHandledApplyUpdateRequest = false; |
| __block bool device2HasHandledApplyUpdateRequest = false; |
| |
| // Flags to track if device1 and device have notified that the update has been applied. |
| __block bool device1HasNotifiedUpdateApplied = false; |
| __block bool device2HasNotifiedUpdateApplied = false; |
| |
| // Set up the apply update request and update applied handlers for device1 and device2. Use the nodeID to verify which |
| // device sent the applyUpdateRequest and subsequent notifyUpdateApplied commands. |
| sOTAProviderDelegate.applyUpdateRequestHandler = ^(NSNumber * nodeID, MTRDeviceController * controller, |
| MTROTASoftwareUpdateProviderClusterApplyUpdateRequestParams * params, ApplyUpdateRequestCompletion completion) { |
| XCTAssertTrue([nodeID isEqualToNumber:@(kDeviceId1)] || [nodeID isEqualToNumber:@(kDeviceId2)]); |
| |
| bool isDeviceID1 = [nodeID isEqualToNumber:@(kDeviceId1)]; |
| NSData * updateToken = (isDeviceID1) ? updateToken1 : updateToken2; |
| |
| // Device1 is updated to version 10 and device2 to version 5. |
| NSNumber * kSoftwareVersion = (isDeviceID1) ? kUpdatedSoftwareVersion_10 : kUpdatedSoftwareVersion_5; |
| NSString * otaImageFilePath = (isDeviceID1) ? otaRawImagePath1 : otaRawImagePath2; |
| NSString * otaDownloadedFilePath = (isDeviceID1) ? runner1.downloadFilePath : runner2.downloadFilePath; |
| |
| XCTAssertEqual(controller, sController); |
| XCTAssertEqualObjects(params.updateToken, updateToken); |
| XCTAssertEqualObjects(params.newVersion, kSoftwareVersion); |
| |
| XCTAssertTrue([[NSFileManager defaultManager] contentsEqualAtPath:otaImageFilePath andPath:otaDownloadedFilePath]); |
| |
| [sOTAProviderDelegate respondToApplyUpdateRequestWithAction:MTROTASoftwareUpdateProviderApplyUpdateActionProceed |
| completion:completion]; |
| |
| if (isDeviceID1) { |
| device1HasHandledApplyUpdateRequest = true; |
| [applyUpdateRequestExpectation1 fulfill]; |
| } else { |
| device2HasHandledApplyUpdateRequest = true; |
| [applyUpdateRequestExpectation2 fulfill]; |
| } |
| |
| // If the applyUpdateRequest from both device1 and device2 has been handled, reset the |
| // applyUpdateRequestHandler to nil |
| if (device1HasHandledApplyUpdateRequest && device2HasHandledApplyUpdateRequest) { |
| sOTAProviderDelegate.applyUpdateRequestHandler = nil; |
| } |
| }; |
| |
| sOTAProviderDelegate.notifyUpdateAppliedHandler = ^(NSNumber * nodeID, MTRDeviceController * controller, |
| MTROTASoftwareUpdateProviderClusterNotifyUpdateAppliedParams * params, MTRStatusCompletion completion) { |
| XCTAssertTrue([nodeID isEqualToNumber:@(kDeviceId1)] || [nodeID isEqualToNumber:@(kDeviceId2)]); |
| |
| bool isDeviceID1 = [nodeID isEqualToNumber:@(kDeviceId1)]; |
| NSData * updateToken = (isDeviceID1) ? updateToken1 : updateToken2; |
| |
| // Device1 is updated to version 10 and device2 to version 5. |
| NSNumber * kSoftwareVersion = (isDeviceID1) ? kUpdatedSoftwareVersion_10 : kUpdatedSoftwareVersion_5; |
| |
| XCTAssertEqual(controller, sController); |
| XCTAssertEqualObjects(params.updateToken, updateToken); |
| XCTAssertEqualObjects(params.softwareVersion, kSoftwareVersion); |
| |
| [sOTAProviderDelegate respondSuccess:completion]; |
| |
| if (isDeviceID1) { |
| device1HasNotifiedUpdateApplied = true; |
| [notifyUpdateAppliedExpectation1 fulfill]; |
| } else { |
| device2HasNotifiedUpdateApplied = true; |
| [notifyUpdateAppliedExpectation2 fulfill]; |
| } |
| |
| // If both device1 and device2 have notified that the update has been applied, reset the |
| // notifyUpdateAppliedHandler to nil |
| if (device1HasNotifiedUpdateApplied && device2HasNotifiedUpdateApplied) { |
| sOTAProviderDelegate.notifyUpdateAppliedHandler = nil; |
| } |
| }; |
| |
| // Advertise ourselves as an OTA provider. |
| XCTestExpectation * announceResponseExpectation1 = [self announceProviderToDevice:device1]; |
| |
| // Make sure we get our callbacks in order for both device1 and device2. Since we do not |
| // send image available to device2 until BDX for device1 has ended, queryExpectation3 must follow |
| // bdxEndExpectation1. |
| // |
| // Give it a bit more time, because we want to allow time for the BDX downloads. |
| [self waitForExpectations:@[ |
| queryExpectation1, bdxBeginExpectation1, bdxQueryExpectation1, bdxEndExpectation1, queryExpectation3, bdxBeginExpectation2, |
| bdxQueryExpectation2, bdxEndExpectation2 |
| ] |
| timeout:(kTimeoutWithUpdateInSeconds) enforceOrder:YES]; |
| |
| // Make sure we get our query expectation for device2 fulfilled when we send busy for device2. |
| [self waitForExpectations:@[ queryExpectation2 ] timeout:(kTimeoutInSeconds)]; |
| |
| // Nothing really defines the ordering of bdxEndExpectation and |
| // applyUpdateRequestExpectation with respect to each other. |
| [self waitForExpectations:@[ |
| applyUpdateRequestExpectation1, notifyUpdateAppliedExpectation1, applyUpdateRequestExpectation2, |
| notifyUpdateAppliedExpectation2 |
| ] |
| timeout:kTimeoutInSeconds |
| enforceOrder:NO]; |
| |
| // Nothing defines the ordering of announceResponseExpectation with respect |
| // to _any_ of the above expectations. |
| [self waitForExpectations:@[ announceResponseExpectation1, announceResponseExpectation2 ] timeout:kTimeoutInSeconds]; |
| } |
| |
| - (void)test007_DoBDXTransferIncrementalOtaUpdate |
| { |
| // In this test, we test incremental OTA update with device3. First we update device3 |
| // to version 5 using image at imagePath1. Once device3 updates and reboots, we update |
| // it to version 10 using image at imagePath2. |
| // |
| // 1) We announce ourselves to device3. |
| // 2) When device3 queries, we return image available at imagePath1 with version number 5. |
| // 3) We set the BDX begin and end handlers for device3 and device3 starts the BDX transfer. |
| // 4) Device3 completes the BDX transfer |
| // 5) Device3 applies the update and reboots with the new image with version number 5 |
| // 6) We announce ourselves to device 3 again. |
| // 7) When device3 queries again, we return image available at imagePath2 with version number 10. |
| // 8) We set the BDX begin and end handlers for device3 and device3 starts the BDX transfer. |
| // 4) Device3 completes the BDX transfer |
| // 5) Device3 applies the update and reboots with the new image with version number 10 |
| |
| NSString * otaRawImagePath1 = [self createRawImageWithVersion:kUpdatedSoftwareVersion_5]; |
| NSString * otaRawImagePath2 = [self createRawImageWithVersion:kUpdatedSoftwareVersion_10]; |
| |
| // Check whether the ota raw image exists at otaRawImagePath1 and otaRawImagePath2 |
| XCTAssertTrue([[NSFileManager defaultManager] fileExistsAtPath:otaRawImagePath1]); |
| XCTAssertTrue([[NSFileManager defaultManager] fileExistsAtPath:otaRawImagePath2]); |
| |
| __auto_type * runner = [[MTROTARequestorAppRunner alloc] initWithPayload:kOnboardingPayload3 testcase:self]; |
| __auto_type * device = [runner commissionWithNodeID:@(kDeviceId3)]; |
| |
| __auto_type * checker = |
| [[MTROTAProviderTransferChecker alloc] initWithRawImagePath:otaRawImagePath1 |
| otaImageDownloadFilePath:runner.downloadFilePath |
| nodeID:@(kDeviceId3) |
| softwareVersion:kUpdatedSoftwareVersion_5 |
| softwareVersionString:kUpdatedSoftwareVersionString_5 |
| applyUpdateAction:MTROTASoftwareUpdateProviderApplyUpdateActionProceed |
| testcase:self]; |
| |
| // Advertise ourselves as an OTA provider. |
| XCTestExpectation * announceResponseExpectation = [self announceProviderToDevice:device]; |
| |
| // Make sure we get our callbacks in order. Give it a bit more time, because |
| // we want to allow time for the BDX download. |
| [self waitForExpectations:@[ |
| checker.queryExpectation, checker.bdxBeginExpectation, checker.bdxQueryExpectation, checker.bdxEndExpectation |
| ] |
| timeout:(kTimeoutWithUpdateInSeconds) enforceOrder:YES]; |
| |
| // Nothing really defines the ordering of bdxEndExpectation and |
| // applyUpdateRequestExpectation with respect to each other. |
| [self waitForExpectations:@[ checker.applyUpdateRequestExpectation, checker.notifyUpdateAppliedExpectation ] |
| timeout:kTimeoutInSeconds |
| enforceOrder:YES]; |
| |
| // Nothing defines the ordering of announceResponseExpectation with respect |
| // to _any_ of the above expectations. |
| [self waitForExpectations:@[ announceResponseExpectation ] timeout:kTimeoutInSeconds]; |
| |
| // Provide an incremental update and makes sure the app is updated to the new version |
| |
| __auto_type * checker1 = |
| [[MTROTAProviderTransferChecker alloc] initWithRawImagePath:otaRawImagePath2 |
| otaImageDownloadFilePath:runner.downloadFilePath |
| nodeID:@(kDeviceId3) |
| softwareVersion:kUpdatedSoftwareVersion_10 |
| softwareVersionString:kUpdatedSoftwareVersionString_10 |
| applyUpdateAction:MTROTASoftwareUpdateProviderApplyUpdateActionProceed |
| testcase:self]; |
| |
| // Advertise ourselves as an OTA provider. |
| XCTestExpectation * announceResponseExpectation1 = [self announceProviderToDevice:device]; |
| |
| // Make sure we get our callbacks in order. Give it a bit more time, because |
| // we want to allow time for the BDX download. |
| [self waitForExpectations:@[ |
| checker1.queryExpectation, checker1.bdxBeginExpectation, checker1.bdxQueryExpectation, checker1.bdxEndExpectation |
| ] |
| timeout:(kTimeoutWithUpdateInSeconds) enforceOrder:YES]; |
| |
| // Nothing really defines the ordering of bdxEndExpectation and |
| // applyUpdateRequestExpectation with respect to each other. |
| [self waitForExpectations:@[ checker1.applyUpdateRequestExpectation, checker1.notifyUpdateAppliedExpectation ] |
| timeout:kTimeoutInSeconds |
| enforceOrder:YES]; |
| |
| // Nothing defines the ordering of announceResponseExpectation with respect |
| // to _any_ of the above expectations. |
| [self waitForExpectations:@[ announceResponseExpectation1 ] timeout:kTimeoutInSeconds]; |
| } |
| #endif // ENABLE_REAL_OTA_UPDATE_TESTS |
| |
| - (void)test008_TestWriteDefaultOTAProviders |
| { |
| __auto_type * runner = [[MTROTARequestorAppRunner alloc] initWithPayload:kOnboardingPayload1 testcase:self]; |
| MTRDevice * device = [runner commissionWithNodeID:@(kDeviceId1)]; |
| |
| dispatch_queue_t queue = dispatch_get_main_queue(); |
| |
| __auto_type dataValue = ^(uint16_t endpoint) { |
| return @{ |
| MTRTypeKey : MTRArrayValueType, |
| MTRValueKey : @[ |
| @{ |
| MTRDataKey : @ { |
| MTRTypeKey : MTRStructureValueType, |
| MTRValueKey : @[ |
| @{ |
| MTRContextTagKey : @(1), |
| MTRDataKey : @ { |
| MTRTypeKey : MTRUnsignedIntegerValueType, |
| MTRValueKey : @(kDeviceId1), |
| }, |
| }, |
| @{ |
| MTRContextTagKey : @(2), |
| MTRDataKey : @ { |
| MTRTypeKey : MTRUnsignedIntegerValueType, |
| MTRValueKey : @(endpoint), |
| }, |
| }, |
| ], |
| }, |
| }, |
| ], |
| }; |
| }; |
| |
| { |
| // Test with MTRBaseDevice first. |
| MTRBaseDevice * baseDevice = [MTRBaseDevice deviceWithNodeID:device.nodeID |
| controller:device.deviceController]; |
| |
| __auto_type * cluster = [[MTRBaseClusterOTASoftwareUpdateRequestor alloc] initWithDevice:baseDevice |
| endpointID:@(0) |
| queue:queue]; |
| __auto_type * providerLocation = [[MTROTASoftwareUpdateRequestorClusterProviderLocation alloc] init]; |
| providerLocation.providerNodeID = @(kDeviceId1); |
| providerLocation.endpoint = @(0); |
| __auto_type * value = @[ providerLocation ]; |
| |
| __auto_type * writeBaseClusterExpectation = [self expectationWithDescription:@"Write succeeded via MTRBaseCluster"]; |
| [cluster writeAttributeDefaultOTAProvidersWithValue:value |
| completion:^(NSError * _Nullable error) { |
| XCTAssertNil(error); |
| [writeBaseClusterExpectation fulfill]; |
| }]; |
| [self waitForExpectations:@[ writeBaseClusterExpectation ] timeout:kTimeoutInSeconds]; |
| |
| __auto_type * writeBaseDeviceExpectation = [self expectationWithDescription:@"Write succeeded via MTRBaseDevice"]; |
| [baseDevice writeAttributeWithEndpointID:@(0) |
| clusterID:@(MTRClusterIDTypeOTASoftwareUpdateRequestorID) |
| attributeID:@(MTRAttributeIDTypeClusterOTASoftwareUpdateRequestorAttributeDefaultOTAProvidersID) |
| value:dataValue(0) |
| timedWriteTimeout:nil |
| queue:queue |
| completion:^(NSArray<NSDictionary<NSString *, id> *> * _Nullable values, NSError * _Nullable error) { |
| XCTAssertNil(error); |
| XCTAssertNotNil(values); |
| XCTAssertEqual(values.count, 1); |
| |
| for (NSDictionary<NSString *, id> * value in values) { |
| XCTAssertNil(value[MTRErrorKey]); |
| } |
| [writeBaseDeviceExpectation fulfill]; |
| }]; |
| [self waitForExpectations:@[ writeBaseDeviceExpectation ] timeout:kTimeoutInSeconds]; |
| } |
| |
| { |
| // Now test with MTRDevice |
| __auto_type * delegate = [[MTRDeviceTestDelegate alloc] init]; |
| // Make sure we don't have expected value notifications confusing our |
| // attribute reports. |
| delegate.skipExpectedValuesForWrite = YES; |
| |
| XCTestExpectation * gotReportsExpectation = [self expectationWithDescription:@"Subscription established"]; |
| delegate.onReportEnd = ^() { |
| [gotReportsExpectation fulfill]; |
| }; |
| |
| [device setDelegate:delegate queue:queue]; |
| |
| [self waitForExpectations:@[ gotReportsExpectation ] timeout:60]; |
| |
| delegate.onReportEnd = nil; |
| |
| __auto_type * expectedAttributePath = [MTRAttributePath attributePathWithEndpointID:@(0) |
| clusterID:@(MTRClusterIDTypeOTASoftwareUpdateRequestorID) |
| attributeID:@(MTRAttributeIDTypeClusterOTASoftwareUpdateRequestorAttributeDefaultOTAProvidersID)]; |
| |
| __block __auto_type * expectedValue = dataValue(1); |
| |
| __block __auto_type * writeExpectation = [self expectationWithDescription:@"Write succeeded via MTRCluster"]; |
| delegate.onAttributeDataReceived = ^(NSArray<NSDictionary<NSString *, id> *> * data) { |
| XCTAssertNotNil(data); |
| XCTAssertEqual(data.count, 1); |
| NSDictionary<NSString *, id> * item = data[0]; |
| |
| XCTAssertNil(item[MTRErrorKey]); |
| |
| MTRAttributePath * path = item[MTRAttributePathKey]; |
| XCTAssertNotNil(path); |
| |
| XCTAssertEqualObjects(path, expectedAttributePath); |
| |
| NSDictionary<NSString *, id> * receivedValue = item[MTRDataKey]; |
| |
| // We can't use XCTAssertEqualObjects to compare receivedValue to |
| // expectedValue here, because receivedValue has a DataVersion |
| // that's missing from expectedValue, and the struct in it has an |
| // extra FabricIndex field. |
| XCTAssertEqualObjects(receivedValue[MTRTypeKey], MTRArrayValueType); |
| |
| NSArray * receivedArray = receivedValue[MTRValueKey]; |
| NSArray * expectedArray = expectedValue[MTRValueKey]; |
| |
| XCTAssertEqual(receivedArray.count, expectedArray.count); |
| |
| for (NSUInteger i = 0; i < receivedArray.count; ++i) { |
| NSDictionary * receivedItem = receivedArray[i][MTRDataKey]; |
| NSDictionary * expectedItem = expectedArray[i][MTRDataKey]; |
| |
| XCTAssertEqual(receivedItem[MTRTypeKey], MTRStructureValueType); |
| XCTAssertEqual(expectedItem[MTRTypeKey], MTRStructureValueType); |
| |
| NSArray * receivedFields = receivedItem[MTRValueKey]; |
| NSArray * expectedFields = expectedItem[MTRValueKey]; |
| |
| // Account for the extra FabricIndex. |
| XCTAssertEqual(receivedFields.count, expectedFields.count + 1); |
| for (NSUInteger j = 0; j < expectedFields.count; ++j) { |
| XCTAssertEqualObjects(receivedFields[j], expectedFields[j]); |
| } |
| } |
| |
| [writeExpectation fulfill]; |
| }; |
| |
| __auto_type * cluster = [[MTRClusterOTASoftwareUpdateRequestor alloc] initWithDevice:device |
| endpointID:@(0) |
| queue:queue]; |
| [cluster writeAttributeDefaultOTAProvidersWithValue:expectedValue |
| expectedValueInterval:@(0)]; |
| [self waitForExpectations:@[ writeExpectation ] timeout:kTimeoutInSeconds]; |
| |
| expectedValue = dataValue(2); |
| writeExpectation = [self expectationWithDescription:@"Write succeeded via MTRDevice"]; |
| [device writeAttributeWithEndpointID:@(0) |
| clusterID:@(MTRClusterIDTypeOTASoftwareUpdateRequestorID) |
| attributeID:@(MTRAttributeIDTypeClusterOTASoftwareUpdateRequestorAttributeDefaultOTAProvidersID) |
| value:expectedValue |
| expectedValueInterval:@(0) |
| timedWriteTimeout:nil]; |
| [self waitForExpectations:@[ writeExpectation ] timeout:kTimeoutInSeconds]; |
| } |
| } |
| |
| - (void)test999_TearDown |
| { |
| [[self class] shutdownStack]; |
| } |
| |
| @end |
| |
| #else // ENABLE_OTA_TESTS |
| |
| @interface MTROTAProviderTests : XCTestCase |
| @end |
| |
| @implementation MTROTAProviderTests |
| @end |
| |
| #endif // ENABLE_OTA_TESTS |
