# Copyright (c) 2021 Project CHIP Authors
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# Auto-generated scripts for harness use only, please review before automation. The endpoints and cluster names are currently set to default

name:
    4.1.14. [TC-CADMIN-1.14] Open commissioning window twice on DUT using BCM
    then ECM [DUT - Commissioner]

PICS:
    - CADMIN.C
    - CADMIN.C.C01.Tx
    - CADMIN.C.C00.Tx

config:
    nodeId: 0x12344321
    cluster: "Basic"
    endpoint: 0

tests:
    - label: "Note"
      verification: |
          For DUT as comissioner  test cases, Chip-tool command used below are an example to verify the functionality. For certification test, we expect DUT should have a capability or way to run the equivalent command.
      disabled: true

    - label: "Precondition"
      verification: |
          Reset Devices to factory defaults
      disabled: true

    - label: "DUT_CR1 starts a commissioning process with TH_CE"
      PICS: CADMIN.C
      verification: |
          "1. Provision the device using your DUT controller (use above instructions) ,
          "
      disabled: true

    - label:
          "DUT_CR1 sends command to TH_CE to open a commissioning window with a
          commissioning timeout of PIXIT.CADMIN.CwDuration seconds using BCM and
          TH_CR3 Commissions with TH_CE"
      PICS: CADMIN.C.C01.Tx
      verification: |
          On first controller, open commissioning window using BCM
          ./chip-tool administratorcommissioning open-basic-commissioning-window 500 1 0 --timedInteractionTimeoutMs 1000


          CHIP:DMG: InvokeResponseMessage =
          [1650278416.248379][11064:11069] CHIP:DMG: {
          [1650278416.248436][11064:11069] CHIP:DMG:         suppressResponse = false,
          [1650278416.248495][11064:11069] CHIP:DMG:         InvokeResponseIBs =
          [1650278416.248570][11064:11069] CHIP:DMG:         [
          [1650278416.248630][11064:11069] CHIP:DMG:                 InvokeResponseIB =
          [1650278416.248718][11064:11069] CHIP:DMG:                 {
          [1650278416.248783][11064:11069] CHIP:DMG:                         CommandStatusIB =
          [1650278416.248860][11064:11069] CHIP:DMG:                         {
          [1650278416.248931][11064:11069] CHIP:DMG:                                 CommandPathIB =
          [1650278416.249011][11064:11069] CHIP:DMG:                                 {
          [1650278416.249100][11064:11069] CHIP:DMG:                                         EndpointId = 0x0,
          [1650278416.249186][11064:11069] CHIP:DMG:                                         ClusterId = 0x3c,
          [1650278416.249268][11064:11069] CHIP:DMG:                                         CommandId = 0x1,
          [1650278416.249347][11064:11069] CHIP:DMG:                                 },
          [1650278416.249430][11064:11069] CHIP:DMG:
          [1650278416.249501][11064:11069] CHIP:DMG:                                 StatusIB =
          [1650278416.249581][11064:11069] CHIP:DMG:                                 {
          [1650278416.249664][11064:11069] CHIP:DMG:                                         status = 0x00 (SUCCESS),
          [1650278416.249738][11064:11069] CHIP:DMG:                                 },
          [1650278416.249823][11064:11069] CHIP:DMG:
          [1650278416.249889][11064:11069] CHIP:DMG:                         },
          [1650278416.249969][11064:11069] CHIP:DMG:
          [1650278416.250035][11064:11069] CHIP:DMG:                 },
          [1650278416.250113][11064:11069] CHIP:DMG:
          [1650278416.250169][11064:11069] CHIP:DMG:         ],
          [1650278416.250241][11064:11069] CHIP:DMG:
          [1650278416.250298][11064:11069] CHIP:DMG:         InteractionModelRevision = 1
          [1650278416.250355][11064:11069] CHIP:DMG: },
          [1650278416.250535][11064:11069] CHIP:DMG: Received Command Response Status for Endpoint=0 Cluster=0x0000_003C Command=0x0000_0001 Status=0x0
          [1650278416.250634][11064:11069] CHIP:DMG: ICR moving to [AwaitingDe]


          On 3rd controller, using chip tool connect to the accessory
          ./chip-tool pairing onnetwork 1 20202021

          Verify you got below message
          Device commissioning completed with success
      disabled: true

    - label:
          "DUT_CR1 sends command to TH_CE to open a commissioning window with a
          commissioning timeout of PIXIT.CADMIN.CwDuration seconds using BCM and
          TH_CR2 Commissions with TH_CE"
      PICS: CADMIN.C.C01.Tx
      verification: |
          On first controller, open commissioning window using BCM
          ./chip-tool administratorcommissioning open-basic-commissioning-window 500 1 0 --timedInteractionTimeoutMs 1000


          CHIP:DMG: InvokeResponseMessage =
          [1650278416.248379][11064:11069] CHIP:DMG: {
          [1650278416.248436][11064:11069] CHIP:DMG:         suppressResponse = false,
          [1650278416.248495][11064:11069] CHIP:DMG:         InvokeResponseIBs =
          [1650278416.248570][11064:11069] CHIP:DMG:         [
          [1650278416.248630][11064:11069] CHIP:DMG:                 InvokeResponseIB =
          [1650278416.248718][11064:11069] CHIP:DMG:                 {
          [1650278416.248783][11064:11069] CHIP:DMG:                         CommandStatusIB =
          [1650278416.248860][11064:11069] CHIP:DMG:                         {
          [1650278416.248931][11064:11069] CHIP:DMG:                                 CommandPathIB =
          [1650278416.249011][11064:11069] CHIP:DMG:                                 {
          [1650278416.249100][11064:11069] CHIP:DMG:                                         EndpointId = 0x0,
          [1650278416.249186][11064:11069] CHIP:DMG:                                         ClusterId = 0x3c,
          [1650278416.249268][11064:11069] CHIP:DMG:                                         CommandId = 0x1,
          [1650278416.249347][11064:11069] CHIP:DMG:                                 },
          [1650278416.249430][11064:11069] CHIP:DMG:
          [1650278416.249501][11064:11069] CHIP:DMG:                                 StatusIB =
          [1650278416.249581][11064:11069] CHIP:DMG:                                 {
          [1650278416.249664][11064:11069] CHIP:DMG:                                         status = 0x00 (SUCCESS),
          [1650278416.249738][11064:11069] CHIP:DMG:                                 },
          [1650278416.249823][11064:11069] CHIP:DMG:
          [1650278416.249889][11064:11069] CHIP:DMG:                         },
          [1650278416.249969][11064:11069] CHIP:DMG:
          [1650278416.250035][11064:11069] CHIP:DMG:                 },
          [1650278416.250113][11064:11069] CHIP:DMG:
          [1650278416.250169][11064:11069] CHIP:DMG:         ],
          [1650278416.250241][11064:11069] CHIP:DMG:
          [1650278416.250298][11064:11069] CHIP:DMG:         InteractionModelRevision = 1
          [1650278416.250355][11064:11069] CHIP:DMG: },
          [1650278416.250535][11064:11069] CHIP:DMG: Received Command Response Status for Endpoint=0 Cluster=0x0000_003C Command=0x0000_0001 Status=0x0
          [1650278416.250634][11064:11069] CHIP:DMG: ICR moving to [AwaitingDe]


          On 2nd controller, using chip tool connect to the accessory
          ./chip-tool pairing onnetwork 1 20202021

          Verify you got below message
          Device commissioning completed with success
      disabled: true

    - label:
          "DUT_CR1 sends command to TH_CE to open a commissioning window with a
          commissioning timeout of PIXIT.CADMIN.CwDuration seconds using BCM"
      PICS: CADMIN.C.C01.Tx
      verification: |
          On first controller, open commissioning window using BCM
          ./chip-tool administratorcommissioning open-basic-commissioning-window 500 1 0 --timedInteractionTimeoutMs 1000


          CHIP:DMG: InvokeResponseMessage =
          [1650278416.248379][11064:11069] CHIP:DMG: {
          [1650278416.248436][11064:11069] CHIP:DMG:         suppressResponse = false,
          [1650278416.248495][11064:11069] CHIP:DMG:         InvokeResponseIBs =
          [1650278416.248570][11064:11069] CHIP:DMG:         [
          [1650278416.248630][11064:11069] CHIP:DMG:                 InvokeResponseIB =
          [1650278416.248718][11064:11069] CHIP:DMG:                 {
          [1650278416.248783][11064:11069] CHIP:DMG:                         CommandStatusIB =
          [1650278416.248860][11064:11069] CHIP:DMG:                         {
          [1650278416.248931][11064:11069] CHIP:DMG:                                 CommandPathIB =
          [1650278416.249011][11064:11069] CHIP:DMG:                                 {
          [1650278416.249100][11064:11069] CHIP:DMG:                                         EndpointId = 0x0,
          [1650278416.249186][11064:11069] CHIP:DMG:                                         ClusterId = 0x3c,
          [1650278416.249268][11064:11069] CHIP:DMG:                                         CommandId = 0x1,
          [1650278416.249347][11064:11069] CHIP:DMG:                                 },
          [1650278416.249430][11064:11069] CHIP:DMG:
          [1650278416.249501][11064:11069] CHIP:DMG:                                 StatusIB =
          [1650278416.249581][11064:11069] CHIP:DMG:                                 {
          [1650278416.249664][11064:11069] CHIP:DMG:                                         status = 0x00 (SUCCESS),
          [1650278416.249738][11064:11069] CHIP:DMG:                                 },
          [1650278416.249823][11064:11069] CHIP:DMG:
          [1650278416.249889][11064:11069] CHIP:DMG:                         },
          [1650278416.249969][11064:11069] CHIP:DMG:
          [1650278416.250035][11064:11069] CHIP:DMG:                 },
          [1650278416.250113][11064:11069] CHIP:DMG:
          [1650278416.250169][11064:11069] CHIP:DMG:         ],
          [1650278416.250241][11064:11069] CHIP:DMG:
          [1650278416.250298][11064:11069] CHIP:DMG:         InteractionModelRevision = 1
          [1650278416.250355][11064:11069] CHIP:DMG: },
          [1650278416.250535][11064:11069] CHIP:DMG: Received Command Response Status for Endpoint=0 Cluster=0x0000_003C Command=0x0000_0001 Status=0x0
          [1650278416.250634][11064:11069] CHIP:DMG: ICR moving to [AwaitingDe]
      disabled: true

    - label:
          "Before the expiration of PIXIT.CADMIN.CwDuration seconds that is set
          in step 4, DUT_CR1 sends command to TH_CE to read WindowStatus
          attribute"
      PICS: CADMIN.C.A0000
      verification: |
          On first controller, read WindowStatus


          ./chip-tool administratorcommissioning read window-status 1 0
      disabled: true

    - label:
          "Before the expiration of PIXIT.CADMIN.CwDuration seconds that is set
          in step 4, DUT_CR1 sends command to TH_CE to open a 2nd commissioning
          window with a commissioning timeout of PIXIT.CADMIN.CwDuration seconds
          using ECM"
      PICS: CADMIN.C.C00.Tx
      verification: |
          On 1st controller chip tool, open commissioning window using ECM

          ./chip-tool pairing open-commissioning-window 1 1 180 1000 3840
      disabled: true

    - label:
          "Wait for the expiration of PIXIT.CADMIN.CwDuration seconds that is
          set in step 4"
      verification: |
          verification step to be updated.
      disabled: true

    - label:
          "DUT_CR1 sends command to TH_CE to re-opens a commissioning window
          with a commissioning timeout of PIXIT.CADMIN.CwDuration seconds using
          ECM"
      PICS: CADMIN.C.C00.Tx
      verification: |
          On 1st controller chip tool, open commissioning window using ECM

          ./chip-tool pairing open-commissioning-window 1 1 180 1000 3840

          [1635925713.966786][9695:9700] CHIP:SC: Success status report received. Session was established
          [1635925713.966839][9695:9700] CHIP:IN: New secure session created for device 0x0000000000000001, key 33!!
          [1635925713.966938][9695:9700] CHIP:CTL: OpenCommissioningWindow for device ID 1
          [1635925713.972601][9695:9700] CHIP:DMG: ICR moving to [AddingComm]
          [1635925713.972705][9695:9700] CHIP:DMG: ICR moving to [AddedComma]
          [1635925713.972815][9695:9700] CHIP:IN: Prepared encrypted message 0xaaaad9b57d10 to 0x0000000000000001 of type 0x8 and protocolId (0, 1) on exchange 31056i with MessageCounter:0.
          [1635925713.972876][9695:9700] CHIP:IN: Sending encrypted msg 0xaaaad9b57d10 with MessageCounter:0 to 0x0000000000000001 at monotonic time: 13449459 msec
          [1635925713.973006][9695:9700] CHIP:DMG: ICR moving to [CommandSen]
          [1635925713.973061][9695:9700] CHIP:CTL: Manual pairing code: [36217551633]
          [1635925713.973120][9695:9700] CHIP:CTL: SetupQRCode: [MT:00000CQM00A7F87ZT10]
          [1635925713.973178][9695:9700] CHIP:EM: Sending Standalone Ack for MessageCounter:1964916542 on exchange 31055i
      disabled: true

    - label:
          "Before the expiration of PIXIT.CADMIN.CwDuration seconds that is set
          in step 8, DUT_CR1 sends command to TH_CE to read WindowStatus
          attribute"
      PICS: CADMIN.C.A0000
      verification: |
          On first controller, read WindowStatus


          ./chip-tool administratorcommissioning read window-status 1 0
      disabled: true

    - label:
          "Before the expiration of PIXIT.CADMIN.CwDuration seconds that is set
          in step 8, TH_CR3 sends command to TH_CE to open a 2nd commissioning
          window with a commissioning timeout of PIXIT.CADMIN.CwDuration seconds
          using ECM"
      PICS: CADMIN.C.C00.Tx
      verification: |
          On 3rd controller chip tool, open commissioning window using ECM

          ./chip-tool pairing open-commissioning-window 1 1 180 1000 3840

          [1635925713.966786][9695:9700] CHIP:SC: Success status report received. Session was established
          [1635925713.966839][9695:9700] CHIP:IN: New secure session created for device 0x0000000000000001, key 33!!
          [1635925713.966938][9695:9700] CHIP:CTL: OpenCommissioningWindow for device ID 1
          [1635925713.972601][9695:9700] CHIP:DMG: ICR moving to [AddingComm]
          [1635925713.972705][9695:9700] CHIP:DMG: ICR moving to [AddedComma]
          [1635925713.972815][9695:9700] CHIP:IN: Prepared encrypted message 0xaaaad9b57d10 to 0x0000000000000001 of type 0x8 and protocolId (0, 1) on exchange 31056i with MessageCounter:0.
          [1635925713.972876][9695:9700] CHIP:IN: Sending encrypted msg 0xaaaad9b57d10 with MessageCounter:0 to 0x0000000000000001 at monotonic time: 13449459 msec
          [1635925713.973006][9695:9700] CHIP:DMG: ICR moving to [CommandSen]
          [1635925713.973061][9695:9700] CHIP:CTL: Manual pairing code: [36217551633]
          [1635925713.973120][9695:9700] CHIP:CTL: SetupQRCode: [MT:00000CQM00A7F87ZT10]
          [1635925713.973178][9695:9700] CHIP:EM: Sending Standalone Ack for MessageCounter:1964916542 on exchange 31055i
      disabled: true

    - label:
          "Wait for the expiration of PIXIT.CADMIN.CwDuration seconds that is
          set in step 8"
      verification: |
          verification step to be updated.
      disabled: true

    - label:
          "DUT_CR1 sends command to TH_CE to open a commissioning window with a
          commissioning timeout of PIXIT.CADMIN.CwDuration seconds using ECM"
      PICS: CADMIN.C.C00.Tx
      verification: |
          On 1st controller chip tool, open commissioning window using ECM

          ./chip-tool pairing open-commissioning-window 1 1 180 1000 3840

          [1635925713.966786][9695:9700] CHIP:SC: Success status report received. Session was established
          [1635925713.966839][9695:9700] CHIP:IN: New secure session created for device 0x0000000000000001, key 33!!
          [1635925713.966938][9695:9700] CHIP:CTL: OpenCommissioningWindow for device ID 1
          [1635925713.972601][9695:9700] CHIP:DMG: ICR moving to [AddingComm]
          [1635925713.972705][9695:9700] CHIP:DMG: ICR moving to [AddedComma]
          [1635925713.972815][9695:9700] CHIP:IN: Prepared encrypted message 0xaaaad9b57d10 to 0x0000000000000001 of type 0x8 and protocolId (0, 1) on exchange 31056i with MessageCounter:0.
          [1635925713.972876][9695:9700] CHIP:IN: Sending encrypted msg 0xaaaad9b57d10 with MessageCounter:0 to 0x0000000000000001 at monotonic time: 13449459 msec
          [1635925713.973006][9695:9700] CHIP:DMG: ICR moving to [CommandSen]
          [1635925713.973061][9695:9700] CHIP:CTL: Manual pairing code: [36217551633]
          [1635925713.973120][9695:9700] CHIP:CTL: SetupQRCode: [MT:00000CQM00A7F87ZT10]
          [1635925713.973178][9695:9700] CHIP:EM: Sending Standalone Ack for MessageCounter:1964916542 on exchange 31055i
      disabled: true

    - label:
          "Before the expiration of PIXIT.CADMIN.CwDuration seconds that is set
          in step 12, TH_CR2 sends command to TH_CE to open a second
          commissioning window with a commissioning timeout of
          PIXIT.CADMIN.CwDuration seconds using ECM"
      PICS: CADMIN.C.C00.Tx
      verification: |
          On 2nd controller using chip tool connect to the accessory using ECM


          ./chip-tool pairing open-commissioning-window 1 1 180 1000 3840
      disabled: true

    - label:
          "Wait for the expiration of PIXIT.CADMIN.CwDuration seconds that is
          set in step 12"
      verification: |
          verification step to be updated.
      disabled: true

    - label: "DUT_CR1 sends command to TH_CE to read WindowStatus attribute"
      PICS: CADMIN.C.A0000
      verification: |
          On first controller, read WindowStatus


          ./chip-tool administratorcommissioning read window-status 1 0

          CHIP:TOO: Endpoint: 0 Cluster: 0x0000_003C Attribute 0x0000_0000 DataVersion: 2849200592
          [1651137648.760469][14047:14052] CHIP:TOO:   WindowStatus: 0
          [1651137648.760534][14047:14052] CHIP:EM: Sending Standalone Ack for MessageCounter:5527412 on exchange 14590i"
      disabled: true

    - label: "DUT_CR1 sends command to TH_CE to read AdminFabricIndex attribute"
      PICS: CADMIN.C.A0001
      verification: |
          On first controller, read AdminFabricIndex

          ./chip-tool administratorcommissioning read admin-fabric-index  1 0

          [1659097193.389295][11728:11733] CHIP:DMG: }
          [1659097193.389588][11728:11733] CHIP:TOO: Endpoint: 0 Cluster: 0x0000_003C Attribute 0x0000_0001 DataVersion: 1299585105
          [1659097193.389731][11728:11733] CHIP:TOO:   AdminFabricIndex: 0
          [1659097193.389913][11728:11733] CHIP:EM: Sending Standalone Ack for MessageCounter:195671426 on exchange 34244i
      disabled: true

    - label: "DUT_CR1 sends command to TH_CE to read AdminVendorId attribute"
      PICS: CADMIN.C.A0002
      verification: |
          On first controller, read AdminVendorId

          ./chip-tool administratorcommissioning read admin-vendor-id 1 0

          [1658838521.588942][9317:9322] CHIP:TOO: Endpoint: 0 Cluster: 0x0000_003C Attribute 0x0000_0002 DataVersion: 2423106591
          [1658838521.589005][9317:9322] CHIP:TOO:   AdminVendorId: 0
          [1658838521.589079][9317:9322] CHIP:EM: Sending Standalone Ack for MessageCounter:217165763 on exchange 55683i
      disabled: true