# Copyright (c) 2021 Project CHIP Authors
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

name:
    24.1.10. [TC-CADMIN-1.10] Device exit commissioning mode after 20 failed
    commission attempts [BCM] [DUT - Commissionee]

PICS:
    - CADMIN.S
    - CADMIN.S.F00

config:
    nodeId: 0x12344321
    timeout: 700
    nodeIdForDuplicateCommissioning:
        type: node_id
        defaultValue: 0x11
    nodeId2:
        type: node_id
        defaultValue: 0xCAFE
    nodeId3:
        type: node_id
        defaultValue: 0xC00FEE
    endpoint: 0
    discriminator:
        type: int16u
        defaultValue: 3840
    correctPayload:
        type: char_string
        defaultValue: "MT:-24J0AFN00KA0648G00"
    incorrectSetupCodePayload:
        type: char_string
        defaultValue: "MT:-24J0AFN00I.0648G00"

tests:
    - label: "Precondition: Reset Devices to factory defaults"
      PICS: PICS_SDK_CI_ONLY
      cluster: "SystemCommands"
      command: "FactoryReset"

    - label: "Precondition: Reset Devices to factory defaults"
      verification: |
          Not implemented in YAML
      cluster: "LogCommands"
      command: "UserPrompt"
      PICS: PICS_SKIP_SAMPLE_APP
      arguments:
          values:
              - name: "message"
                value: "Factory Reset the DUT and enter 'y' after success"
              - name: "expectedValue"
                value: "y"

    - label: "TH_CR1 starts a commissioning process with DUT_CE"
      cluster: "DelayCommands"
      command: "WaitForCommissionee"
      PICS: CADMIN.S
      arguments:
          values:
              - name: "nodeId"
                value: nodeId

    - label: "TH_CR1 opens a commissioning window on DUT_CE"
      cluster: "AdministratorCommissioning"
      command: "OpenBasicCommissioningWindow"
      PICS: CADMIN.S.C01.Rsp
      timedInteractionTimeoutMs: 10000
      arguments:
          values:
              - name: "CommissioningTimeout"
                value: 900

    #Check for DNS-SD advertisement CM is not possible in YAML
    - label: "Verify that the DNS-SD advertisement shows CM=1"
      verification: |
          On TH_CR1 send the below command

          ubuntu@ubuntu:~/may16_cntrl/connectedhomeip/examples/chip-tool/out/debug$ avahi-browse -rt _matterc._udp
          +   eth0 IPv6 2664ED6939FC373C                              _matterc._udp        local
          =   eth0 IPv6 2664ED6939FC373C                              _matterc._udp        local
            hostname = [E45F010F27530000.local]
            address = [fe80::e65f:1ff:fe0f:2753]
            port = [5540]
            txt = ["PI=" "PH=36" "CM=1" "D=3840" "T=1" "SAI=300" "SII=5000" "VP=65521+32769"]
      cluster: "LogCommands"
      command: "UserPrompt"
      PICS: PICS_SKIP_SAMPLE_APP
      arguments:
          values:
              - name: "message"
                value: "enter 'y' after success"
              - name: "expectedValue"
                value: "y"

    - label:
          "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup
          code"
      identity: "beta"
      cluster: "CommissionerCommands"
      command: "PairWithCode"
      PICS: CADMIN.S
      arguments:
          values:
              - name: "nodeId"
                value: nodeId2
              - name: "payload"
                value: incorrectSetupCodePayload
      response:
          error: FAILURE

    - label:
          "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup
          code"
      identity: "beta"
      cluster: "CommissionerCommands"
      command: "PairWithCode"
      PICS: CADMIN.S
      arguments:
          values:
              - name: "nodeId"
                value: nodeId2
              - name: "payload"
                value: incorrectSetupCodePayload
      response:
          error: FAILURE

    - label:
          "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup
          code"
      identity: "beta"
      cluster: "CommissionerCommands"
      command: "PairWithCode"
      PICS: CADMIN.S
      arguments:
          values:
              - name: "nodeId"
                value: nodeId2
              - name: "payload"
                value: incorrectSetupCodePayload
      response:
          error: FAILURE

    - label:
          "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup
          code"
      identity: "beta"
      cluster: "CommissionerCommands"
      command: "PairWithCode"
      PICS: CADMIN.S
      arguments:
          values:
              - name: "nodeId"
                value: nodeId2
              - name: "payload"
                value: incorrectSetupCodePayload
      response:
          error: FAILURE

    - label:
          "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup
          code"
      identity: "beta"
      cluster: "CommissionerCommands"
      command: "PairWithCode"
      PICS: CADMIN.S
      arguments:
          values:
              - name: "nodeId"
                value: nodeId2
              - name: "payload"
                value: incorrectSetupCodePayload
      response:
          error: FAILURE

    - label:
          "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup
          code"
      identity: "beta"
      cluster: "CommissionerCommands"
      command: "PairWithCode"
      PICS: CADMIN.S
      arguments:
          values:
              - name: "nodeId"
                value: nodeId2
              - name: "payload"
                value: incorrectSetupCodePayload
      response:
          error: FAILURE

    - label:
          "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup
          code"
      identity: "beta"
      cluster: "CommissionerCommands"
      command: "PairWithCode"
      PICS: CADMIN.S
      arguments:
          values:
              - name: "nodeId"
                value: nodeId2
              - name: "payload"
                value: incorrectSetupCodePayload
      response:
          error: FAILURE

    - label:
          "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup
          code"
      identity: "beta"
      cluster: "CommissionerCommands"
      command: "PairWithCode"
      PICS: CADMIN.S
      arguments:
          values:
              - name: "nodeId"
                value: nodeId2
              - name: "payload"
                value: incorrectSetupCodePayload
      response:
          error: FAILURE

    - label:
          "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup
          code"
      identity: "beta"
      cluster: "CommissionerCommands"
      command: "PairWithCode"
      PICS: CADMIN.S
      arguments:
          values:
              - name: "nodeId"
                value: nodeId2
              - name: "payload"
                value: incorrectSetupCodePayload
      response:
          error: FAILURE

    - label:
          "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup
          code"
      identity: "beta"
      cluster: "CommissionerCommands"
      command: "PairWithCode"
      arguments:
          values:
              - name: "nodeId"
                value: nodeId2
              - name: "payload"
                value: incorrectSetupCodePayload
      response:
          error: FAILURE

    - label:
          "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup
          code"
      identity: "beta"
      cluster: "CommissionerCommands"
      command: "PairWithCode"
      PICS: CADMIN.S
      arguments:
          values:
              - name: "nodeId"
                value: nodeId2
              - name: "payload"
                value: incorrectSetupCodePayload
      response:
          error: FAILURE

    - label:
          "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup
          code"
      identity: "beta"
      cluster: "CommissionerCommands"
      command: "PairWithCode"
      PICS: CADMIN.S
      arguments:
          values:
              - name: "nodeId"
                value: nodeId2
              - name: "payload"
                value: incorrectSetupCodePayload
      response:
          error: FAILURE

    - label:
          "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup
          code"
      identity: "beta"
      cluster: "CommissionerCommands"
      command: "PairWithCode"
      PICS: CADMIN.S
      arguments:
          values:
              - name: "nodeId"
                value: nodeId2
              - name: "payload"
                value: incorrectSetupCodePayload
      response:
          error: FAILURE

    - label:
          "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup
          code"
      identity: "beta"
      cluster: "CommissionerCommands"
      command: "PairWithCode"
      PICS: CADMIN.S
      arguments:
          values:
              - name: "nodeId"
                value: nodeId2
              - name: "payload"
                value: incorrectSetupCodePayload
      response:
          error: FAILURE

    - label:
          "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup
          code"
      identity: "beta"
      cluster: "CommissionerCommands"
      command: "PairWithCode"
      PICS: CADMIN.S
      arguments:
          values:
              - name: "nodeId"
                value: nodeId2
              - name: "payload"
                value: incorrectSetupCodePayload
      response:
          error: FAILURE

    - label:
          "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup
          code"
      identity: "beta"
      cluster: "CommissionerCommands"
      command: "PairWithCode"
      PICS: CADMIN.S
      arguments:
          values:
              - name: "nodeId"
                value: nodeId2
              - name: "payload"
                value: incorrectSetupCodePayload
      response:
          error: FAILURE

    - label:
          "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup
          code"
      identity: "beta"
      cluster: "CommissionerCommands"
      command: "PairWithCode"
      PICS: CADMIN.S
      arguments:
          values:
              - name: "nodeId"
                value: nodeId2
              - name: "payload"
                value: incorrectSetupCodePayload
      response:
          error: FAILURE

    - label:
          "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup
          code"
      identity: "beta"
      cluster: "CommissionerCommands"
      command: "PairWithCode"
      PICS: CADMIN.S
      arguments:
          values:
              - name: "nodeId"
                value: nodeId2
              - name: "payload"
                value: incorrectSetupCodePayload
      response:
          error: FAILURE

    - label:
          "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup
          code"
      identity: "beta"
      cluster: "CommissionerCommands"
      command: "PairWithCode"
      PICS: CADMIN.S
      arguments:
          values:
              - name: "nodeId"
                value: nodeId2
              - name: "payload"
                value: incorrectSetupCodePayload
      response:
          error: FAILURE

    - label:
          "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup
          code"
      identity: "beta"
      cluster: "CommissionerCommands"
      command: "PairWithCode"
      PICS: CADMIN.S
      arguments:
          values:
              - name: "nodeId"
                value: nodeId2
              - name: "payload"
                value: incorrectSetupCodePayload
      response:
          error: FAILURE

    # This step must match the verification step above where we checked `correctPayload`
    - label:
          "TH_CR2 attempts to do PASE to DUT_CE using the correct onboarding
          payload"
      identity: "beta"
      cluster: "CommissionerCommands"
      command: "PairWithCode"
      PICS: CADMIN.S
      arguments:
          values:
              - name: "nodeId"
                value: nodeId2
              - name: "payload"
                value: correctPayload
      response:
          error: FAILURE