# Copyright (c) 2021 Project CHIP Authors
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# Auto-generated scripts for harness use only, please review before automation. The endpoints and cluster names are currently set to default

name:
    4.1.9. [TC-CADMIN-1.9] Device exit commissioning mode after 20 failed
    commission attempts [ECM] [DUT - Commissionee]

PICS:
    - CADMIN.S

config:
    nodeId: 0x12344321
    cluster: "Basic Information"
    endpoint: 0

tests:
    - label: "Precondition"
      verification: |
          Reset Devices to factory defaults
      disabled: true

    - label: "TH_CR1 starts a commissioning process with DUT_CE"
      PICS: CADMIN.S
      verification: |
          "1. Provision the DUT_CE (all-cluster-app) device using TH_CR1 (chip-tool ) on the raspi"
      disabled: true

    - label:
          "TH_CR1 opens a commissioning window on DUT_CE using a commissioning
          timeout of PIXIT.CADMIN.CwDuration seconds using ECM"
      PICS: CADMIN.S.C00.Rsp
      verification: |
          On TH_CR1 send the below command

          ./chip-tool pairing open-commissioning-window 1 1 900 1000 3841

          Verify the Open commisioning window on the DUT_CE(all-cluster-app) Log:

          [1660904553.796857][3537:3537] CHIP:DMG: Received command for Endpoint=0 Cluster=0x0000_003C Command=0x0000_0000
          [1660904553.796951][3537:3537] CHIP:ZCL: Received command to open commissioning window
          [1660904553.797255][3537:3537] CHIP:IN: SecureSession[0xaaab142ef7f0]: Allocated Type:1 LSID:34523

          Verify the Manual pairing code on the TH_CR1(chip-tool) Log:

          [1635864513.699433][3850:3855] CHIP:DMG: ICR moving to [CommandSen]
          [1635864513.699489][3850:3855] CHIP:CTL: Manual pairing code: [36177160937]
          [1635864513.699566][3850:3855] CHIP:CTL: SetupQRCode: [MT:00000CQM00YZN476420]
          [1635864513.699636][3850:3855] CHIP:EM: Sending Standalone Ack for MessageCounter:2599714227 on exchange 60688i
          [1635864513.699685][3850:3855] CHIP:IN: Prepared plaintext message 0xffff8a7cd960 to 0x0000000000000000 of type
      disabled: true

    - label: "DNS-SD records shows DUT_CE advertising"
      verification: |
          On TH_CR1 send the below command
           avahi-browse -rt _matterc._udp

          +   eth0 IPv6 B755245DE9E5E186                              _matterc._udp        local
          =   eth0 IPv6 B755245DE9E5E186                              _matterc._udp        local
             hostname = [E45F010F27530000.local]
             address = [fe80::e65f:1ff:fe0f:2753]
             port = [5540]
             txt = [""PI="" ""PH=36"" ""CM=2"" ""D=3840"" ""T=1"" ""SAI=300"" ""SII=5000"" ""VP=65521+32769""]"
      disabled: true

    - label:
          "Before the expiration of PIXIT.CADMIN.CwDuration set in step 2, Set
          up a TH_CR2 to start attempting to do PASE to DUT_CE and failing 20
          times. This can be done using a valid onboarding payload with an
          incorrect setupcode"
      PICS: CADMIN.S
      verification: |
          On TH_CR2 send the below command

          The manualcode with wrong setupcode is generated by using below command
          ./chip-tool payload generate-manualcode --discriminator 0xF00 --setup-pin-code 20202022 --version 0 --vendor-id 0xFFF1 --product-id 0x8001 --commissioning-mode 0
          [1658404815.887421][2367:2367] CHIP:TOO: Manual Code: 34970212338

          Attempt to do pairing with wrong manual code for 20 times
          ./chip-tool pairing  code  2  34970212338  --timeout 40  --commissioner-name beta

          Verify the failure response in any one of following error for 20 attempts of wrong passcode in TH_CR2(chip-tool)

          [1660903056.889713][31261:31266] CHIP:SC: Failed to verify peer's MAC. This can happen when setup code is incorrect.
          [1660903056.889744][31261:31266] CHIP:SC: Sending status report. Protocol code 2, exchange 28732
          [1660903056.889781][31261:31266] CHIP:EM: Piggybacking Ack for MessageCounter:72597021 on exchange: 28732i
          [1660903056.889817][31261:31266] CHIP:IN: Prepared unauthenticated message 0x7fbf5403c308 to 0x0000000000000000 (0)  of type 0x40 and protocolId (0, 0) on exchange 28732i with MessageCounter:110107069.
          [1660903056.889855][31261:31266] CHIP:IN: Sending unauthenticated msg 0x7fbf5403c308 with MessageCounter:110107069 to 0x0000000000000000 at monotonic time: 00000000012CB695 msec
          [1660903056.890044][31261:31266] CHIP:IN: SecureSession[0x55686a679ff0]: Released - Type:1 LSID:10585
          [1660903056.890094][31261:31266] CHIP:SC: Failed during PASE session setup: ../../third_party/connectedhomeip/src/crypto/CHIPCryptoPALOpenSSL.cpp:1437: CHIP Error 0x000000AC: Internal error
          (or)
          [1678862522.832525][700613:700613] CHIP:DL: NVS set: chip-counters/total-operational-hours = 0 (0x0)
          [1678862522.832537][700613:700613] CHIP:DL: Inet Layer shutdown
          [1678862522.832545][700613:700613] CHIP:DL: BLE shutdown
          [1678862522.832554][700613:700613] CHIP:DL: System Layer shutdown
          [1678862522.832663][700613:700613] CHIP:TOO: Run command failure: ../../commands/pairing/PairingCommand.cpp:215: CHIP Error 0x00000003: Incorrect state
      disabled: true

    - label:
          "Before the expiration of PIXIT.CADMIN.CwDuration set in step 2,
          TH_CR2 attempts to do PASE to DUT_CE using the correct onboarding
          payload"
      PICS: CADMIN.S
      verification: |
          On TH_CR2 send the below command  (with correct passcode)

          ./chip-tool pairing code 2 36177160937  --commissioner-name beta
          Verify the following error on 21st attempt using correct passcode in TH_CR2(chip-tool)

          [1665484807.015876][5399:5399] CHIP:DL: renamed tmp file to file (/tmp/chip_counters.ini)
          [1665484807.016042][5399:5399] CHIP:DL: NVS set: chip-counters/total-operational-hours = 0 (0x0)
          [1665484807.016108][5399:5399] CHIP:DL: Inet Layer shutdown
          [1665484807.016163][5399:5399] CHIP:DL: BLE shutdown
          [1665484807.016215][5399:5399] CHIP:DL: System Layer shutdown
          [1665484807.016460][5399:5399] CHIP:TOO: Run command failure: ../../commands/pairing/PairingCommand.cpp:164: CHIP Error 0x00000003: Incorrect state
      disabled: true

    - label:
          "TH_CR3 starts a commissioning process with DUT_CE using the correct
          PAKEVerifier"
      PICS: CADMIN.S
      verification: |
          On TH_CR3 send the below command  (with correct passcode)

          ./chip-tool pairing code 3 36177160938  (With correct passcode)  --commissioner-name gamma

          Verify the following error on  correct passcode in TH_CR3(chip-tool)

          [1665484807.015876][5399:5399] CHIP:DL: renamed tmp file to file (/tmp/chip_counters.ini)
          [1665484807.016042][5399:5399] CHIP:DL: NVS set: chip-counters/total-operational-hours = 0 (0x0)
          [1665484807.016108][5399:5399] CHIP:DL: Inet Layer shutdown
          [1665484807.016163][5399:5399] CHIP:DL: BLE shutdown
          [1665484807.016215][5399:5399] CHIP:DL: System Layer shutdown
          [1665484807.016460][5399:5399] CHIP:TOO: Run command failure: ../../commands/pairing/PairingCommand.cpp:164: CHIP Error 0x00000003: Incorrect state
      disabled: true