# Copyright (c) 2021 Project CHIP Authors
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

name:
    Window Covering [TC-WNCV-3.2] DownOrClose command & OperationalStatus
    attribute Verification [DUT_Server]

PICS:
    - WNCV.S

# TC-WNCV tests featuremap conditional dependencies -> use PICS

config:
    nodeId: 0x12344321
    cluster: "Window Covering"
    endpoint: 1

tests:
    - label: "0: Wait for the commissioned device to be retrieved"
      cluster: "DelayCommands"
      command: "WaitForCommissionee"
      arguments:
          values:
              - name: "nodeId"
                value: nodeId

    ################ Position Init Phase #############
    ### Step 1x -> Initialize the Covering position before any testing
    ### MANDATORY Init Commands
    - label:
          "1a: TH sends UpOrOpen command to preposition the DUT in the opposite
          direction"
      command: "UpOrOpen"
      PICS: WNCV.S.C00.Rsp

    - label: "1b: TH Waits for 10 seconds movement(s) on the device"
      cluster: "DelayCommands"
      command: "WaitForMs"
      arguments:
          values:
              - name: "ms"
                value: 10000

    ###
    ### Mandatory Depends on the FeatureMap
    - label:
          "1c: If (PA & LF) TH reads CurrentPositionLiftPercent100ths attribute
          from DUT"
      command: "readAttribute"
      attribute: "CurrentPositionLiftPercent100ths"
      PICS: WNCV.S.F00 && WNCV.S.F02 && WNCV.S.A000e
      response:
          constraints:
              type: Percent100ths
              minValue: 0
              maxValue: 9999

    ### Optional Depends on the FeatureMap
    - label:
          "1d: If (PA & LF) TH reads CurrentPositionLiftPercentage optional
          attribute from DUT"
      command: "readAttribute"
      attribute: "CurrentPositionLiftPercentage"
      PICS: WNCV.S.F00 && WNCV.S.F02 && WNCV.S.A0008
      response:
          constraints:
              type: Percent
              minValue: 0
              maxValue: 99

    ### Mandatory Depends on the FeatureMap
    - label:
          "1e: If (PA & TL) TH reads CurrentPositionTiltPercent100ths attribute
          from DUT"
      command: "readAttribute"
      attribute: "CurrentPositionTiltPercent100ths"
      PICS: WNCV.S.F01 && WNCV.S.F04 && WNCV.S.A000f
      response:
          constraints:
              type: Percent100ths
              minValue: 0
              maxValue: 9999

    ### Optional Depends on the FeatureMap
    - label:
          "1f: If (PA & TL) TH reads CurrentPositionTiltPercentage optional
          attribute from DUT"
      command: "readAttribute"
      attribute: "CurrentPositionTiltPercentage"
      PICS: WNCV.S.F01 && WNCV.S.F04 && WNCV.S.A0009
      response:
          constraints:
              type: Percent
              minValue: 0
              maxValue: 99

    ######## DownOrClose Command #######
    ### Step 2x -> Check DownOrClose Fast effects

    - label: "2: Subscribe to DUT reports on OperationalStatus attribute"
      command: "subscribeAttribute"
      attribute: "OperationalStatus"
      minInterval: 4
      maxInterval: 5
      response:
          constraints:
              type: bitmap8

    ### MANDATORY Command
    - label: "2a: TH sends DownOrClose command to DUT"
      command: "DownOrClose"
      PICS: WNCV.S.C01.Rsp

    ### Depending on the DUT specs we might prefer a arguments here
    - label: "2b: DUT updates its attributes"
      cluster: "DelayCommands"
      command: "WaitForMs"
      arguments:
          values:
              - name: "ms"
                value: 100

    ### Mandatory Depends on the FeatureMap
    - label:
          "2c: If (PA & LF) TH reads TargetPositionLiftPercent100ths attribute
          from DUT"
      command: "readAttribute"
      attribute: "TargetPositionLiftPercent100ths"
      PICS: WNCV.S.F00 && WNCV.S.F02 && WNCV.S.A000b
      response:
          value: 10000

    ### Mandatory Depends on the FeatureMap
    - label:
          "2d: If (PA & TL) TH reads TargetPositionTiltPercent100ths attribute
          from DUT"
      command: "readAttribute"
      attribute: "TargetPositionTiltPercent100ths"
      PICS: WNCV.S.F01 && WNCV.S.F04 && WNCV.S.A000c
      response:
          value: 10000

    - label: "2e: TH leave the device moving for 2 seconds"
      cluster: "DelayCommands"
      command: "WaitForMs"
      arguments:
          values:
              - name: "ms"
                value: 2000

    ######## DownOrClose Reports #######
    ### Step 3x -> Check DownOrClose Mid term effects
    ### Depends on the FeatureMap
    # The value of bit 0..1 must be 10b & if (LF) value of bit 2..3 must be 10b else 00b & if (TL) value of bit 4..5 must be 10b else 00b
    # Only 3 possibilities are possible here : 0Ah = 10, 22h = 34 or 2Ah = 42 then check a range for simplicity [10 - 42]
    - label: "3a: TH reads OperationalStatus attribute's bit 0..1"
      PICS: WNCV.S.A000a && PICS_SDK_CI_ONLY
      command: "readAttribute"
      attribute: "OperationalStatus"
      response:
          constraints:
              type: bitmap8
              hasMasksSet: [0x2]
              hasMasksClear: [0x1]

    - label:
          "3a: TH reads OperationalStatus attribute's bit 2..3 (WNCV.S.F00(LF))"
      PICS: WNCV.S.A000a && WNCV.S.F00 && PICS_SDK_CI_ONLY
      command: "readAttribute"
      attribute: "OperationalStatus"
      response:
          constraints:
              type: bitmap8
              hasMasksSet: [0x8]
              hasMasksClear: [0x4]

    - label:
          "3a: TH reads OperationalStatus attribute's bit 2..3 (WNCV.S.F00(LF))"
      PICS: WNCV.S.A000a && !WNCV.S.F00 && PICS_SDK_CI_ONLY
      command: "readAttribute"
      attribute: "OperationalStatus"
      response:
          constraints:
              type: bitmap8
              hasMasksClear: [0x4, 0x8]

    - label:
          "3a: TH reads OperationalStatus attribute's bit 4..5 (WNCV.S.F01(TL))"
      PICS: WNCV.S.A000a && WNCV.S.F01 && PICS_SDK_CI_ONLY
      command: "readAttribute"
      attribute: "OperationalStatus"
      response:
          constraints:
              type: bitmap8
              hasMasksSet: [0x20]
              hasMasksClear: [0x10]

    - label:
          "3a: TH reads OperationalStatus attribute's bit 4..5 (WNCV.S.F01(TL))"
      PICS: WNCV.S.A000a && !WNCV.S.F01 && PICS_SDK_CI_ONLY
      command: "readAttribute"
      attribute: "OperationalStatus"
      response:
          constraints:
              type: bitmap8
              hasMasksClear: [0x10, 0x20]

    #Issue https://github.com/CHIP-Specifications/chip-test-scripts/issues/509
    - label: "3a: TH reads OperationalStatus attribute from DUT"
      verification: |
          ./chip-tool windowcovering read operational-status 1 1

          Verify "OperationalStatus " on the TH(Chip-tool) Log: is currently not zero and is in closing mode

          CHIP:DMG:                                         Data = 42,
          CHIP:DMG: }
          CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0102 Attribute 0x0000_000ADataVersion: 324132078
          CHIP:TOO:   OperationalStatus: 42
      cluster: "LogCommands"
      command: "UserPrompt"
      PICS: PICS_SKIP_SAMPLE_APP
      arguments:
          values:
              - name: "message"
                value: "Enter 'y' after success"
              - name: "expectedValue"
                value: "y"

    ### Depending on the DUT specs we might prefer a arguments here
    - label: "3a2: DUT updates its attributes"
      cluster: "DelayCommands"
      command: "WaitForMs"
      arguments:
          values:
              - name: "ms"
                value: 3000

    ### Mandatory Depends on the FeatureMap
    - label:
          "3b: If (PA & LF) TH reads CurrentPositionLiftPercent100ths attribute
          from DUT"
      command: "readAttribute"
      attribute: "CurrentPositionLiftPercent100ths"
      PICS: WNCV.S.F00 && WNCV.S.F02 && WNCV.S.A000e
      response:
          constraints:
              type: Percent100ths
              minValue: 1
              maxValue: 10000

    ### Optional Depends on the FeatureMap
    - label:
          "3c: If (PA & LF) TH reads CurrentPositionLiftPercentage optional
          attribute from DUT"
      command: "readAttribute"
      attribute: "CurrentPositionLiftPercentage"
      PICS: WNCV.S.F00 && WNCV.S.F02 && WNCV.S.A0008
      response:
          constraints:
              type: Percent
              minValue: 1
              maxValue: 100

    ### Mandatory Depends on the FeatureMap
    - label:
          "3d: If (PA & TL) TH reads CurrentPositionTiltPercent100ths attribute
          from DUT"
      command: "readAttribute"
      attribute: "CurrentPositionTiltPercent100ths"
      PICS: WNCV.S.F01 && WNCV.S.F04 && WNCV.S.A000f
      response:
          constraints:
              type: Percent100ths
              minValue: 1
              maxValue: 10000

    ### Optional Depends on the FeatureMap
    - label:
          "3e: If (PA & LF) TH reads CurrentPositionTiltPercentage optional
          attribute from DUT"
      command: "readAttribute"
      attribute: "CurrentPositionTiltPercentage"
      PICS: WNCV.S.F01 && WNCV.S.F04 && WNCV.S.A0009
      response:
          constraints:
              type: Percent
              minValue: 1
              maxValue: 100

    ######## STOP #######
    ### Step 4x -> Check StopMotion fast effects
    ### MANDATORY Command
    - label: "4a: TH sends a StopMotion command to DUT"
      command: "StopMotion"
      PICS: WNCV.S.C02.Rsp

    - label:
          "4b: TH waits for 3 seconds the end of inertial movement(s) on the
          device"
      cluster: "DelayCommands"
      command: "WaitForMs"
      arguments:
          values:
              - name: "ms"
                value: 3000

    ### Must Be ZERO
    # The value of bit 0..1 must be 00b & if (LF) value of bit 2..3 must be 00b & if (TL) value of bit 4..5 must be 00b
    - label:
          "4c: Verify DUT update OperationalStatus attribute to TH after a
          StopMotion"
      command: "readAttribute"
      attribute: "OperationalStatus"
      PICS: WNCV.S.A000a
      response:
          value: 0

    ### Step 5x -> Check Stop Motion longer period effect
    - label: "5a: TH waits for x seconds attributes update on the device"
      cluster: "DelayCommands"
      command: "WaitForMs"
      arguments:
          values:
              - name: "ms"
                value: 1000

    ### Mandatory Depends on the FeatureMap shall be tested as equals CurrentPositionLiftPercent100ths
    - label:
          "5b: If (PA & LF) TH reads TargetPositionLiftPercent100ths attribute
          from DUT"
      command: "readAttribute"
      attribute: "TargetPositionLiftPercent100ths"
      PICS: WNCV.S.F00 && WNCV.S.F02 && WNCV.S.A000b
      response:
          constraints:
              type: Percent100ths
              minValue: 1
              maxValue: 10000

    ### Mandatory Depends on the FeatureMap shall be tested as equals CurrentPositionTiltPercent100ths
    - label:
          "5c: If (PA & TL) TH reads TargetPositionTiltPercent100ths attribute
          from DUT"
      command: "readAttribute"
      attribute: "TargetPositionTiltPercent100ths"
      PICS: WNCV.S.F01 && WNCV.S.F04 && WNCV.S.A000c
      response:
          constraints:
              type: Percent100ths
              minValue: 1
              maxValue: 10000