An example showing the use of CHIP on the Linux. The document will describe how to build and run CHIP Linux Energy Management Example on Raspberry Pi. This doc is tested on Ubuntu for Raspberry Pi Server 20.04 LTS (aarch64) and Ubuntu for Raspberry Pi Desktop 20.10 (aarch64)
To cross-compile this example on x64 host and run on NXP i.MX 8M Mini EVK, see the associated README document for details.
Install tool chain
$ sudo apt-get install git gcc g++ python pkg-config libssl-dev libdbus-1-dev libglib2.0-dev ninja-build python3-venv python3-dev unzip
Build the example application:
$ cd ~/connectedhomeip/examples/energy-management-app/linux $ git submodule update --init $ source third_party/connectedhomeip/scripts/activate.sh $ gn gen out/debug $ ninja -C out/debug
To delete generated executable, libraries and object files use:
$ cd ~/connectedhomeip/examples/energy-management-app/linux $ rm -rf out/
Build the example with pigweed RPC
$ cd ~/connectedhomeip/examples/energy-management-app/linux
$ git submodule update --init
$ source third_party/connectedhomeip/scripts/activate.sh
$ gn gen out/debug --args='import("//with_pw_rpc.gni")'
$ ninja -C out/debug
--wifi
Enables WiFi management feature. Required for WiFi commissioning.
--thread
Enables Thread management feature, requires ot-br-posix dbus daemon running. Required for Thread commissioning.
--ble-device <interface id>
Use specific bluetooth interface for BLE advertisement and connections.
interface id: the number after hci when listing BLE interfaces by hciconfig command, for example, --ble-device 1 means using hci1 interface. Default: 0.
If you want to test Echo protocol, please enable Echo handler
gn gen out/debug --args='chip_app_use_echo=true' ninja -C out/debug
Prerequisites
pi-bluetooth via APT.Building
Follow Building section of this document.
Running
[Optional] Plug USB Bluetooth dongle
Plug USB Bluetooth dongle and find its bluetooth device number. The number after hci is the bluetooth device number, 1 in this example.
$ hciconfig
hci1: Type: Primary Bus: USB
BD Address: 00:1A:7D:AA:BB:CC ACL MTU: 310:10 SCO MTU: 64:8
UP RUNNING PSCAN ISCAN
RX bytes:20942 acl:1023 sco:0 events:1140 errors:0
TX bytes:16559 acl:1011 sco:0 commands:121 errors:0
hci0: Type: Primary Bus: UART
BD Address: B8:27:EB:AA:BB:CC ACL MTU: 1021:8 SCO MTU: 64:1
UP RUNNING PSCAN ISCAN
RX bytes:8609495 acl:14 sco:0 events:217484 errors:0
TX bytes:92185 acl:20 sco:0 commands:5259 errors:0
Run Linux Energy Management Example App
$ cd ~/connectedhomeip/examples/energy-management-app/linux $ sudo out/debug/chip-energy-management-app --ble-device [bluetooth device number] # In this example, the device we want to use is hci1 $ sudo out/debug/chip-energy-management-app --ble-device 1
Test the device using ChipDeviceController on your laptop / workstation etc.
As part of building the example with RPCs enabled the chip_rpc python interactive console is installed into your venv. The python wheel files are also created in the output folder: out/debug/chip_rpc_console_wheels. To install the wheel files without rebuilding: pip3 install out/debug/chip_rpc_console_wheels/*.whl
To use the chip-rpc console after it has been installed run: chip-console -s localhost:33000 -o /<YourFolder>/pw_log.out
Then you can Get and Set the Energy Management using the RPCs: rpcs.chip.rpc.EnergyManagement.Get()
Device tracing is available to analyze the device performance. To turn on tracing, build with RPC enabled. See Building with RPC enabled.
Obtain tracing json file.
$ ./{PIGWEED_REPO}/pw_trace_tokenized/py/pw_trace_tokenized/get_trace.py -s localhost:33000 \
-o {OUTPUT_FILE} -t {ELF_FILE} {PIGWEED_REPO}/pw_trace_tokenized/pw_trace_protos/trace_rpc.proto