| # Copyright (c) 2021 Project CHIP Authors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| import logging |
| import os |
| from enum import Enum, auto |
| |
| from .builder import BuilderOutput |
| from .gn import GnBuilder |
| |
| |
| class BouffalolabApp(Enum): |
| LIGHT = auto() |
| |
| def ExampleName(self): |
| if self == BouffalolabApp.LIGHT: |
| return 'lighting-app' |
| else: |
| raise Exception('Unknown app type: %r' % self) |
| |
| def AppNamePrefix(self, chip_name): |
| if self == BouffalolabApp.LIGHT: |
| return ('chip-%s-lighting-example' % chip_name) |
| else: |
| raise Exception('Unknown app type: %r' % self) |
| |
| def FlashBundleName(self): |
| if self == BouffalolabApp.LIGHT: |
| return 'lighting_app.flashbundle.txt' |
| else: |
| raise Exception('Unknown app type: %r' % self) |
| |
| |
| class BouffalolabBoard(Enum): |
| BL602_IoT_Matter_V1 = auto() |
| BL602_NIGHT_LIGHT = auto() |
| XT_ZB6_DevKit = auto() |
| BL706_NIGHT_LIGHT = auto() |
| BL706DK = auto() |
| BL704LDK = auto() |
| |
| def GnArgName(self): |
| if self == BouffalolabBoard.BL602_IoT_Matter_V1: |
| return 'BL602-IoT-Matter-V1' |
| elif self == BouffalolabBoard.BL602_NIGHT_LIGHT: |
| return 'BL602-NIGHT-LIGHT' |
| elif self == BouffalolabBoard.XT_ZB6_DevKit: |
| return 'XT-ZB6-DevKit' |
| elif self == BouffalolabBoard.BL706_NIGHT_LIGHT: |
| return 'BL706-NIGHT-LIGHT' |
| elif self == BouffalolabBoard.BL706DK: |
| return 'BL706DK' |
| elif self == BouffalolabBoard.BL704LDK: |
| return 'BL704LDK' |
| else: |
| raise Exception('Unknown board #: %r' % self) |
| |
| |
| class BouffalolabBuilder(GnBuilder): |
| |
| def __init__(self, |
| root, |
| runner, |
| app: BouffalolabApp = BouffalolabApp.LIGHT, |
| board: BouffalolabBoard = BouffalolabBoard.XT_ZB6_DevKit, |
| enable_rpcs: bool = False, |
| module_type: str = "BL706C-22", |
| baudrate=2000000, |
| enable_shell: bool = False, |
| enable_cdc: bool = False, |
| enable_resetCnt: bool = False, |
| enable_rotating_device_id: bool = False, |
| enable_mfd: bool = False, |
| enable_ethernet: bool = False, |
| enable_wifi: bool = False, |
| enable_thread: bool = False, |
| enable_frame_ptr: bool = False, |
| enable_heap_monitoring: bool = False, |
| use_matter_openthread: bool = False, |
| enable_easyflash: bool = False, |
| ): |
| |
| if 'BL602' == module_type: |
| bouffalo_chip = 'bl602' |
| elif 'BL704L' == module_type: |
| bouffalo_chip = 'bl702l' |
| elif "BL70" in module_type: |
| bouffalo_chip = 'bl702' |
| else: |
| raise Exception(f"module_type {module_type} is not supported") |
| |
| super(BouffalolabBuilder, self).__init__( |
| root=os.path.join(root, 'examples', |
| app.ExampleName(), 'bouffalolab', bouffalo_chip), |
| runner=runner |
| ) |
| |
| self.argsOpt = [] |
| self.chip_name = bouffalo_chip |
| self.app = app |
| self.board = board |
| |
| toolchain = os.path.join(root, os.path.split(os.path.realpath(__file__))[0], '../../../config/bouffalolab/toolchain') |
| toolchain = f'custom_toolchain="{toolchain}:riscv_gcc"' |
| if toolchain: |
| self.argsOpt.append(toolchain) |
| |
| self.argsOpt.append(f'board="{self.board.GnArgName()}"') |
| self.argsOpt.append(f'baudrate="{baudrate}"') |
| |
| if not (enable_wifi or enable_thread or enable_ethernet): |
| # decide default connectivity for each chip |
| if bouffalo_chip == "bl602": |
| enable_wifi, enable_thread, enable_ethernet = True, False, False |
| elif bouffalo_chip == "bl702": |
| enable_wifi, enable_thread, enable_ethernet = False, True, False |
| elif bouffalo_chip == "bl702l": |
| enable_wifi, enable_thread, enable_ethernet = False, True, False |
| |
| if [enable_wifi, enable_thread, enable_ethernet].count(True) > 1: |
| raise Exception('Currently, only one of wifi, thread and ethernet supports.') |
| |
| # hardware connectivity support check |
| if bouffalo_chip == "bl602": |
| if enable_ethernet or enable_thread: |
| raise Exception(f"SoC {bouffalo_chip} does NOT support connectivity Ethernet/Thread.") |
| elif bouffalo_chip == "bl702": |
| self.argsOpt.append(f'module_type="{module_type}"') |
| if board != BouffalolabBoard.BL706DK: |
| if enable_ethernet or enable_wifi: |
| raise Exception(f"Board {self.board.GnArgName()} does NOT support connectivity Ethernet/Wi-Fi.") |
| elif bouffalo_chip == "bl702l": |
| if enable_ethernet or enable_wifi: |
| raise Exception(f"SoC {bouffalo_chip} does NOT support connectivity Ethernet/Wi-Fi currently.") |
| |
| if enable_thread: |
| chip_mdns = "platform" |
| elif enable_ethernet or enable_wifi: |
| chip_mdns = "minimal" |
| |
| if enable_frame_ptr and bouffalo_chip == "bl616": |
| raise Exception("BL616 does NOT support frame pointer for debug purpose.") |
| |
| self.argsOpt.append(f'chip_enable_ethernet={str(enable_ethernet).lower()}') |
| self.argsOpt.append(f'chip_enable_wifi={str(enable_wifi).lower()}') |
| self.argsOpt.append(f'chip_enable_openthread={str(enable_thread).lower()}') |
| |
| # for enable_ethernet, do not need ble for commissioning |
| self.argsOpt.append(f'chip_config_network_layer_ble={str(enable_wifi or enable_thread).lower()}') |
| |
| self.argsOpt.append(f'chip_mdns="{chip_mdns}"') |
| self.argsOpt.append(f'chip_inet_config_enable_ipv4={str(enable_ethernet or enable_wifi).lower()}') |
| |
| self.argsOpt.append(f'bouffalo_sdk_component_easyflash_enabled=true') |
| |
| if enable_thread: |
| self.argsOpt.append('chip_system_config_use_open_thread_inet_endpoints=true') |
| self.argsOpt.append('chip_with_lwip=false') |
| self.argsOpt.append(f'openthread_project_core_config_file="{bouffalo_chip}-openthread-core-bl-config.h"') |
| self.argsOpt.append(f'openthread_package_version="7e32165be"') |
| |
| if not use_matter_openthread: |
| if bouffalo_chip in {"bl702", "bl702l"}: |
| self.argsOpt.append( |
| 'openthread_root="//third_party/connectedhomeip/third_party/bouffalolab/repo/components/network/thread/openthread"') |
| |
| if enable_cdc: |
| if bouffalo_chip != "bl702": |
| raise Exception(f'SoC {bouffalo_chip} does NOT support USB CDC') |
| if enable_ethernet: |
| raise Exception(f'SoC {bouffalo_chip} can NOT have both of USB CDC and Ethernet functions together.') |
| |
| self.argsOpt.append('enable_cdc_module=true') |
| |
| if enable_rpcs: |
| self.argsOpt.append('import("//with_pw_rpc.gni")') |
| elif enable_shell: |
| self.argsOpt.append('chip_build_libshell=true') |
| |
| if enable_resetCnt: |
| self.argsOpt.append('enable_reset_counter=true') |
| |
| if enable_rotating_device_id: |
| self.argsOpt.append('chip_enable_additional_data_advertising=true') |
| self.argsOpt.append('chip_enable_rotating_device_id=true') |
| |
| if enable_mfd: |
| self.argsOpt.append("chip_enable_factory_data=true") |
| |
| self.enable_frame_ptr = enable_frame_ptr |
| self.argsOpt.append(f"enable_debug_frame_ptr={str(enable_frame_ptr).lower()}") |
| self.argsOpt.append(f"enable_heap_monitoring={str(enable_heap_monitoring).lower()}") |
| |
| try: |
| self.argsOpt.append('bouffalolab_sdk_root="%s"' % os.environ['BOUFFALOLAB_SDK_ROOT']) |
| except KeyError as err: |
| self.print_enviroment_error() |
| raise err |
| |
| def print_enviroment_error(self): |
| logging.fatal('*' * 80) |
| logging.error('Flashtool is not installed, or environment variable BOUFFALOLAB_SDK_ROOT is not exported.') |
| logging.fatal('\tPlease make sure Bouffalo Lab SDK installs as below:') |
| logging.fatal('\t\t./integrations/docker/images/stage-2/chip-build-bouffalolab/setup.sh') |
| |
| logging.fatal('\tPlease make sure BOUFFALOLAB_SDK_ROOT exports before building as below:') |
| logging.fatal('\t\texport BOUFFALOLAB_SDK_ROOT="your install path"') |
| logging.fatal('*' * 80) |
| |
| def GnBuildArgs(self): |
| if self.enable_frame_ptr: |
| debug_output_file = os.path.join(self.output_dir, '%s.out' % self.app.AppNamePrefix(self.chip_name)) |
| return self.argsOpt + [f'debug_output_file="{debug_output_file}"'] |
| else: |
| return self.argsOpt |
| |
| def build_outputs(self): |
| extensions = ["out"] |
| if self.options.enable_link_map_file: |
| extensions.append("out.map") |
| for ext in extensions: |
| name = f"{self.app.AppNamePrefix(self.chip_name)}.{ext}" |
| yield BuilderOutput(os.path.join(self.output_dir, name), name) |
| |
| def PreBuildCommand(self): |
| os.system("rm -rf {}/config".format(self.output_dir)) |
| os.system("rm -rf {}/ota_images".format(self.output_dir)) |
| os.system("rm -rf {}".format(os.path.join(self.output_dir, 'boot2*.bin'))) |
| os.system("rm -rf {}".format(os.path.join(self.output_dir, '%s*' % self.app.AppNamePrefix(self.chip_name)))) |
| |
| def PostBuildCommand(self): |
| |
| abs_path_fw = os.path.join(self.output_dir, self.app.AppNamePrefix(self.chip_name) + ".bin") |
| |
| if os.path.isfile(abs_path_fw): |
| target_dir = self.output_dir.replace(self.chip_dir, "").strip("/") |
| |
| abs_path_fw_bin = os.path.join(self.output_dir, self.app.AppNamePrefix(self.chip_name) + ".bin") |
| path_fw = os.path.join(target_dir, self.app.AppNamePrefix(self.chip_name) + ".bin") |
| path_flash_script = os.path.join(target_dir, self.app.AppNamePrefix(self.chip_name) + ".flash.py") |
| |
| logging.info('*' * 80) |
| |
| logging.info("Firmware is built out at: {}".format(path_fw)) |
| logging.info("Command to generate ota image: ") |
| logging.info('./{} --build-ota --vendor-id <vendor id> --product-id <product id> ' |
| '--version <version> --version-str <version string> ' |
| '--digest-algorithm <digest algorithm>'.format(path_flash_script)) |
| logging.info("Command to generate and sign ota image: ") |
| logging.info('./{} --build-ota --vendor-id <vendor id> --product-id <product id> ' |
| '--version <version> --version-str <version string> ' |
| '--digest-algorithm <digest algorithm> --sk <private key>'.format(path_flash_script)) |
| logging.info('*' * 80) |
