Matter `Genio` Lock Example

An example showing the use of Matter on the MediaTek Genio MT793X.

Matter Genio Lock Example

Introduction

The Genio (MT793X) lock example provides a baseline demonstration of a door lock control device, built using Matter and the MediaTek Genio SDK. It can be controlled by a Chip controller over Wi-Fi network.

The Genio device can be commissioned over Bluetooth Low Energy where the device and the Chip controller will exchange security information with the Rendez-vous procedure. Network credentials are then provided to the Genio device which will then join the network.

The lighting example is intended to serve both as a means to explore the workings of Matter as well as a template for creating real products based on the MediaTek platform.

Building

Following the Linux related descriptions in Build Matter to prepare the build environment.
Supported hardware:
Genio 130A (MT7931) board:
- EK-AI7931LD KIT

Build the example application:

  `cd ~/connectedhomeip`
  `./scripts/examples/gn_genio_example.sh ./examples/lighting-app/genio` `./out/lighting-app`

To delete generated executable, libraries and object files use:

  `$ cd ~/connectedhomeip`
  `$ rm -rf ./out/`

OR use GN/Ninja directly

  `$ cd ~/connectedhomeip/examples/lighting-app/genio`
  `$ git submodule update --init`
  `$ source third_party/connectedhomeip/scripts/activate.sh`
  `$ gn gen out/debug`
  `$ ninja -C out/debug`

To delete generated executable, libraries and object files use:

  `$ cd ~/connectedhomeip/examples/lighting-app/genio`
  `$ rm -rf out/`

Flashing the Application

Copy the GUI based Flash Tool. from the Linux Host that the example was build to a Windows PC.
Flash Tool can be found in this source tree under this directory
third_party/mt793x_sdk/filogic/flash_tool
On the Windows PC, run the Flash Tool
1. Select the scatter.ini file in the ./out/lighting-app directory.
2. Follow the instruction that comes with EK-AI7931LD KIT to switch the kit to download mode.
3. Click Download on FLASH TOOL.

Running the Complete Example

You can provision and control the Chip device using the python controller, Chip tool standalone, Android or iOS app
[CHIP Tool]](https://github.com/project-chip/connectedhomeip/blob/master/docs/guides/chip_tool_guide.md)
Here is an example with the CHIP Tool controller:
```
  chiptool- pairing ble-wifi 1234 my-ap myappassword 20202021 3840

  chiptool onoff on 1 1

  chiptool onoff off 1 1
```

You can test the LED by light command as shown below

 > light
   help            Usage: light <subcommand>
   onoff           Usage: light onoff <subcommand>
   color           Usage: light color <r:0~255> <g:0~255> <b:0~255>
   level           Usage: light level <level:0~100>

Notes

Depending on your network settings your router might not provide native ipv6 addresses to your devices (Border router / PC). If this is the case, you need to add a static ipv6 addresses on both device and then an ipv6 route to the border router on your PC

Matter Genio Lock Example