RVC example app

This example app is meant to demonstrate an implementation of a Matter Robotic Vacuum Cleaner device.

State machine

Below is a diagram describing the state machine for this app.

This app can support most of the tests in the test plans.

Out-of-band messages

Out-of-band messages are available to simulate typical device behaviors and allow the app to navigate to all the states. To send an out-of-band message, echo the JSON message to the /tmp/chip_rvc_fifo_<PID> file. The JSON message must have a "Name" key that contains the command name. This name is shown in the state machine diagram above. Example echo '{"Name": "Charged"}' > /tmp/chip_rvc_fifo_42.

ServiceArea related messages

AddMap message

This message adds a map to the SupportedMaps attribute of the Service Area cluster. This message requires the following extra keys.

• MapId This is an int setting the ID of the new map.
• MapName This is a string setting the name of the new map.

AddArea message

This message adds a new area to the SupportedAreas attribute of the Service Area cluster. This message requires the following extra keys, most of which are optional. Consult the SupportedAreas attribute spec for more information on what are valid areas.

• AreaId This is an int setting the ID of the area.
• MapId This is an int sitting the map ID the area is associated with.
• LocationName This is a string setting the location's name.
• FloorNumber This is an int setting the floor number of the area.
• AreaType This is an int setting the area type tag.
• LandmarkTag This is an int setting the landmark tag.
• PositianTag This is an int setting the position tag.

RemoveMap message

This message removes a map with the given map ID. This message requires the int key MapId.

RemoveArea message

This message removes an area with the given area ID. This message requires the int key AreaId.

AreaComplete message

This indicates that the area currently being serviced as indicated by the service area cluster is now complete.

ErrorEvent message

The error event message requires the additional key "Error" which specifies the error state ID. This can be one of UnableToStartOrResume, UnableToCompleteOperation, CommandInvalidInState, FailedToFindChargingDock, Stuck, DustBinMissing, DustBinFull, WaterTankEmpty, WaterTankMissing, WaterTankLidOpen, MopCleaningPadMissing.

Testing

A PICS file that details what this app supports testing is available in the pics directory as a txt file. After building the RVC example app, chip-tool, and setting up the testing environment, python tests can be executed with ./scripts/tests/run_python_test.py --script src/python_testing/<script_name>.py --script-args "--storage-path admin_storage.json --PICS examples/rvc-app/rvc-common/pics/RVC_App_Test_Plan.txt --int-arg <PIXIT_Definitions:1>"

Note: If the testing environment has not been commissioned with the RVC app,

1. use chip-tool to switch on the commissioning window out/debug/chip-tool pairing open-commissioning-window 0x1230 1 180 1000 42
2. Get the manual pairing code. This will look something like Manual pairing code: [01073112097].
3. Run any one of the tests with the --commission-only and --manual-code flags: ./scripts/tests/run_python_test.py --script src/python_testing/TC_RVCCLEANM_1_2.py --script-args "--commissioning-method on-network --manual-code 01073112097 --commission-only"

Below are the PIXIT definitions required for the different python tests.

RVC Clean Mode cluster

TC 1.2

Example command: ./scripts/tests/run_python_test.py --script src/python_testing/TC_RVCCLEANM_1_2.py --script-args "--storage-path admin_storage.json --PICS examples/rvc-app/rvc-common/pics/rvc-app-pics-values --endpoint=1"

TC 2.1

PIXIT: PIXIT.RVCCLEANM.MODE_CHANGE_FAIL:1 PIXIT.RVCCLEANM.MODE_CHANGE_OK:2
Example command: ./scripts/tests/run_python_test.py --script src/python_testing/TC_RVCCLEANM_2_1.py --script-args "--storage-path admin_storage.json --PICS examples/rvc-app/rvc-common/pics/rvc-app-pics-values --endpoint 1 --int-arg PIXIT.RVCCLEANM.MODE_CHANGE_FAIL:1 PIXIT.RVCCLEANM.MODE_CHANGE_OK:2"

When asked “Manually put the device in a state from which it will FAIL to transition to mode 1”, set the RvcRunMode to 1. chip-tool rvcrunmode change-to-mode 1

When asked “Manually put the device in a state from which it will SUCCESSFULLY transition to mode 2”, set the RvcRunMode to 0. chip-tool rvcrunmode change-to-mode 0

TC 2.2

Example command: ./scripts/tests/run_python_test.py --script src/python_testing/TC_RVCCLEANM_2_2.py --script-args "--storage-path admin_storage.json --PICS examples/rvc-app/rvc-common/pics/rvc-app-pics-values --endpoint=1"

RVC Run Mode cluster

TC 1.2

Example command: ./scripts/tests/run_python_test.py --script src/python_testing/TC_RVCRUNM_1_2.py --script-args "--storage-path admin_storage.json --PICS examples/rvc-app/rvc-common/pics/rvc-app-pics-values --endpoint=1"

TC 2.1

PIXIT: PIXIT.RVCRUNM.MODE_CHANGE_FAIL:2 PIXIT.RVCRUNM.MODE_CHANGE_OK:0
Example command: ./scripts/tests/run_python_test.py --script src/python_testing/TC_RVCRUNM_2_1.py --script-args "--storage-path admin_storage.json --PICS examples/rvc-app/rvc-common/pics/rvc-app-pics-values --endpoint 1 --int-arg PIXIT.RVCRUNM.MODE_CHANGE_OK:0 PIXIT.RVCRUNM.MODE_CHANGE_FAIL:2"

When asked “Manually put the device in a state from which it will FAIL to transition to mode 2”, set the RvcRunMode to 1. chip-tool rvcrunmode change-to-mode 1

When asked “Manually put the device in a state from which it will SUCCESSFULLY transition to mode 0”, do nothing.

TC 2.2

PIXIT: PIXIT.RVCRUNM.MODE_A:1 PIXIT.RVCRUNM.MODE_B:2
Example command: ./scripts/tests/run_python_test.py --script src/python_testing/TC_RVCRUNM_2_2.py --script-args "--storage-path admin_storage.json --PICS examples/rvc-app/rvc-common/pics/rvc-app-pics-values --endpoint 1 --int-arg PIXIT.RVCRUNM.MODE_A:1 PIXIT.RVCRUNM.MODE_B:2"

RVC Operational State cluster

TC 2.1

Example command: ./scripts/tests/run_python_test.py --script src/python_testing/TC_RVCOPSTATE_2_1.py --script-args "--storage-path admin_storage.json --PICS examples/rvc-app/rvc-common/pics/rvc-app-pics-values --endpoint 1"

Use the out-of-band messages, chip-tool messages and the state machine diagram to navigate to the required states.

TC 2.3

Example command: ./scripts/tests/run_python_test.py --script src/python_testing/TC_RVCOPSTATE_2_3.py --script-args "--storage-path admin_storage.json --PICS examples/rvc-app/rvc-common/pics/rvc-app-pics-values --endpoint 1"

Use the out-of-band messages, chip-tool messages and the state machine diagram to transition to the required states.

TC 2.4

Example command: ./scripts/tests/run_python_test.py --script src/python_testing/TC_RVCOPSTATE_2_4.py --script-args "--storage-path admin_storage.json --PICS examples/rvc-app/rvc-common/pics/rvc-app-pics-values --endpoint 1"

Use the out-of-band messages, chip-tool messages and the state machine diagram to transition to the required states.

Running the yaml tests

After commissioning the device, all the yaml tests can be run by running the run_all_yaml_tests.sh script from the root dir with the node ID that the device was commissioned with.

Service Area Cluster

TC 1.2

Example command: ./scripts/tests/run_python_test.py --script src/python_testing/TC_SEAR_1_2.py --script-args "--storage-path admin_storage.json --PICS examples/rvc-app/rvc-common/pics/rvc-app-pics-values --endpoint 1"

TC 1.3

todo once the test plan issue is resolved, add the required PIXIT and set the PICSSEAR.S.M.VALID_STATE_FOR_SELECT_AREAS=1. PIXIT: `` Example command: ./scripts/tests/run_python_test.py --script src/python_testing/TC_SEAR_1_3.py --script-args "--storage-path admin_storage.json --PICS examples/rvc-app/rvc-common/pics/rvc-app-pics-values --endpoint 1

TC 1.4

Example command: ./scripts/tests/run_python_test.py --script src/python_testing/TC_SEAR_1_4.py --script-args "--storage-path admin_storage.json --PICS examples/rvc-app/rvc-common/pics/rvc-app-pics-values --endpoint 1

TC 1.5

Example command: ./scripts/tests/run_python_test.py --script src/python_testing/TC_SEAR_1_5.py --script-args "--storage-path admin_storage.json --PICS examples/rvc-app/rvc-common/pics/rvc-app-pics-values --endpoint 1"

TC 1.6

Example command: ./scripts/tests/run_python_test.py --script src/python_testing/TC_SEAR_1_6.py --script-args "--storage-path admin_storage.json --PICS examples/rvc-app/rvc-common/pics/rvc-app-pics-values --endpoint 1