| /** |
| * |
| * Copyright (c) 2020 Project CHIP Authors |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include "thermostat-server.h" |
| #include "PresetStructWithOwnedMembers.h" |
| |
| #include <app/util/attribute-storage.h> |
| |
| #include <app-common/zap-generated/attributes/Accessors.h> |
| #include <app-common/zap-generated/callback.h> |
| #include <app-common/zap-generated/cluster-objects.h> |
| #include <app-common/zap-generated/ids/Attributes.h> |
| #include <app/CommandHandler.h> |
| #include <app/ConcreteAttributePath.h> |
| #include <app/ConcreteCommandPath.h> |
| #include <app/server/Server.h> |
| #include <app/util/endpoint-config-api.h> |
| #include <lib/core/CHIPEncoding.h> |
| #include <platform/internal/CHIPDeviceLayerInternal.h> |
| |
| using namespace chip; |
| using namespace chip::app; |
| using namespace chip::app::Clusters; |
| using namespace chip::app::Clusters::Thermostat; |
| using namespace chip::app::Clusters::Thermostat::Structs; |
| using namespace chip::app::Clusters::Thermostat::Attributes; |
| |
| using imcode = Protocols::InteractionModel::Status; |
| |
| constexpr int16_t kDefaultAbsMinHeatSetpointLimit = 700; // 7C (44.5 F) is the default |
| constexpr int16_t kDefaultAbsMaxHeatSetpointLimit = 3000; // 30C (86 F) is the default |
| constexpr int16_t kDefaultMinHeatSetpointLimit = 700; // 7C (44.5 F) is the default |
| constexpr int16_t kDefaultMaxHeatSetpointLimit = 3000; // 30C (86 F) is the default |
| constexpr int16_t kDefaultAbsMinCoolSetpointLimit = 1600; // 16C (61 F) is the default |
| constexpr int16_t kDefaultAbsMaxCoolSetpointLimit = 3200; // 32C (90 F) is the default |
| constexpr int16_t kDefaultMinCoolSetpointLimit = 1600; // 16C (61 F) is the default |
| constexpr int16_t kDefaultMaxCoolSetpointLimit = 3200; // 32C (90 F) is the default |
| constexpr int16_t kDefaultHeatingSetpoint = 2000; |
| constexpr int16_t kDefaultCoolingSetpoint = 2600; |
| constexpr int8_t kDefaultDeadBand = 25; // 2.5C is the default |
| |
| // IMPORTANT NOTE: |
| // No Side effects are permitted in emberAfThermostatClusterServerPreAttributeChangedCallback |
| // If a setpoint changes is required as a result of setpoint limit change |
| // it does not happen here. It is the responsibility of the device to adjust the setpoint(s) |
| // as required in emberAfThermostatClusterServerPostAttributeChangedCallback |
| // limit change validation assures that there is at least 1 setpoint that will be valid |
| |
| #define FEATURE_MAP_HEAT 0x01 |
| #define FEATURE_MAP_COOL 0x02 |
| #define FEATURE_MAP_OCC 0x04 |
| #define FEATURE_MAP_SCH 0x08 |
| #define FEATURE_MAP_SB 0x10 |
| #define FEATURE_MAP_AUTO 0x20 |
| |
| #define FEATURE_MAP_DEFAULT FEATURE_MAP_HEAT | FEATURE_MAP_COOL | FEATURE_MAP_AUTO |
| |
| namespace { |
| |
| ThermostatAttrAccess gThermostatAttrAccess; |
| |
| static_assert(kThermostatEndpointCount <= kEmberInvalidEndpointIndex, "Thermostat Delegate table size error"); |
| |
| Delegate * gDelegateTable[kThermostatEndpointCount] = { nullptr }; |
| |
| Delegate * GetDelegate(EndpointId endpoint) |
| { |
| uint16_t ep = |
| emberAfGetClusterServerEndpointIndex(endpoint, Thermostat::Id, MATTER_DM_THERMOSTAT_CLUSTER_SERVER_ENDPOINT_COUNT); |
| return (ep >= ArraySize(gDelegateTable) ? nullptr : gDelegateTable[ep]); |
| } |
| |
| /** |
| * @brief Check if a preset is valid. |
| * |
| * @param[in] preset The preset to check. |
| * |
| * @return true If the preset is valid i.e the PresetHandle (if not null) fits within size constraints and the presetScenario enum |
| * value is valid. Otherwise, return false. |
| */ |
| bool IsValidPresetEntry(const PresetStruct::Type & preset) |
| { |
| // Check that the preset handle is not too long. |
| if (!preset.presetHandle.IsNull() && preset.presetHandle.Value().size() > kPresetHandleSize) |
| { |
| return false; |
| } |
| |
| // Ensure we have a valid PresetScenario. |
| return (preset.presetScenario != PresetScenarioEnum::kUnknownEnumValue); |
| } |
| |
| /** |
| * @brief Callback that is called when the timeout for editing the presets expires. |
| * |
| * @param[in] systemLayer The system layer. |
| * @param[in] callbackContext The context passed to the timer callback. |
| */ |
| void TimerExpiredCallback(System::Layer * systemLayer, void * callbackContext) |
| { |
| EndpointId endpoint = static_cast<EndpointId>(reinterpret_cast<uintptr_t>(callbackContext)); |
| |
| Delegate * delegate = GetDelegate(endpoint); |
| VerifyOrReturn(delegate != nullptr, ChipLogError(Zcl, "Delegate is null. Unable to handle timer expired")); |
| |
| delegate->ClearPendingPresetList(); |
| gThermostatAttrAccess.SetAtomicWrite(endpoint, ScopedNodeId(), kAtomicWriteState_Closed); |
| } |
| |
| /** |
| * @brief Schedules a timer for the given timeout in milliseconds. |
| * |
| * @param[in] endpoint The endpoint to use. |
| * @param[in] timeoutMilliseconds The timeout in milliseconds. |
| */ |
| void ScheduleTimer(EndpointId endpoint, System::Clock::Milliseconds16 timeout) |
| { |
| DeviceLayer::SystemLayer().StartTimer(timeout, TimerExpiredCallback, |
| reinterpret_cast<void *>(static_cast<uintptr_t>(endpoint))); |
| } |
| |
| /** |
| * @brief Clears the currently scheduled timer. |
| * |
| * @param[in] endpoint The endpoint to use. |
| */ |
| void ClearTimer(EndpointId endpoint) |
| { |
| DeviceLayer::SystemLayer().CancelTimer(TimerExpiredCallback, reinterpret_cast<void *>(static_cast<uintptr_t>(endpoint))); |
| } |
| |
| /** |
| * @brief Checks if the preset is built-in |
| * |
| * @param[in] preset The preset to check. |
| * |
| * @return true If the preset is built-in, false otherwise. |
| */ |
| bool IsBuiltIn(const PresetStructWithOwnedMembers & preset) |
| { |
| return preset.GetBuiltIn().ValueOr(false); |
| } |
| |
| /** |
| * @brief Checks if the presets are matching i.e the presetHandles are the same. |
| * |
| * @param[in] preset The preset to check. |
| * @param[in] presetToMatch The preset to match with. |
| * |
| * @return true If the presets match, false otherwise. If both preset handles are null, returns false |
| */ |
| bool PresetHandlesExistAndMatch(const PresetStructWithOwnedMembers & preset, const PresetStructWithOwnedMembers & presetToMatch) |
| { |
| return !preset.GetPresetHandle().IsNull() && !presetToMatch.GetPresetHandle().IsNull() && |
| preset.GetPresetHandle().Value().data_equal(presetToMatch.GetPresetHandle().Value()); |
| } |
| |
| /** |
| * @brief Get the source scoped node id. |
| * |
| * @param[in] commandObj The command handler object. |
| * |
| * @return The scoped node id of the source node. If the scoped node id is not retreived, return ScopedNodeId(). |
| */ |
| ScopedNodeId GetSourceScopedNodeId(CommandHandler * commandObj) |
| { |
| ScopedNodeId sourceNodeId = ScopedNodeId(); |
| auto sessionHandle = commandObj->GetExchangeContext()->GetSessionHandle(); |
| |
| if (sessionHandle->IsSecureSession()) |
| { |
| sourceNodeId = sessionHandle->AsSecureSession()->GetPeer(); |
| } |
| else if (sessionHandle->IsGroupSession()) |
| { |
| sourceNodeId = sessionHandle->AsIncomingGroupSession()->GetPeer(); |
| } |
| return sourceNodeId; |
| } |
| |
| /** |
| * @brief Discards pending atomic writes and atomic state. |
| * |
| * @param[in] delegate The delegate to use. |
| * @param[in] endpoint The endpoint to use. |
| * |
| */ |
| void resetAtomicWrite(Delegate * delegate, EndpointId endpoint) |
| { |
| if (delegate != nullptr) |
| { |
| delegate->ClearPendingPresetList(); |
| } |
| ClearTimer(endpoint); |
| gThermostatAttrAccess.SetAtomicWrite(endpoint, ScopedNodeId(), kAtomicWriteState_Closed); |
| } |
| |
| /** |
| * @brief Finds an entry in the pending presets list that matches a preset. |
| * The presetHandle of the two presets must match. |
| * |
| * @param[in] delegate The delegate to use. |
| * @param[in] presetToMatch The preset to match with. |
| * |
| * @return true if a matching entry was found in the pending presets list, false otherwise. |
| */ |
| bool MatchingPendingPresetExists(Delegate * delegate, const PresetStructWithOwnedMembers & presetToMatch) |
| { |
| VerifyOrReturnValue(delegate != nullptr, false); |
| |
| for (uint8_t i = 0; true; i++) |
| { |
| PresetStructWithOwnedMembers preset; |
| CHIP_ERROR err = delegate->GetPendingPresetAtIndex(i, preset); |
| |
| if (err == CHIP_ERROR_PROVIDER_LIST_EXHAUSTED) |
| { |
| break; |
| } |
| if (err != CHIP_NO_ERROR) |
| { |
| ChipLogError(Zcl, "MatchingPendingPresetExists: GetPendingPresetAtIndex failed with error %" CHIP_ERROR_FORMAT, |
| err.Format()); |
| return false; |
| } |
| |
| if (PresetHandlesExistAndMatch(preset, presetToMatch)) |
| { |
| return true; |
| } |
| } |
| return false; |
| } |
| |
| /** |
| * @brief Finds and returns an entry in the Presets attribute list that matches |
| * a preset, if such an entry exists. The presetToMatch must have a preset handle. |
| * |
| * @param[in] delegate The delegate to use. |
| * @param[in] presetToMatch The preset to match with. |
| * @param[out] matchingPreset The preset in the Presets attribute list that has the same PresetHandle as the presetToMatch. |
| * |
| * @return true if a matching entry was found in the presets attribute list, false otherwise. |
| */ |
| bool GetMatchingPresetInPresets(Delegate * delegate, const PresetStruct::Type & presetToMatch, |
| PresetStructWithOwnedMembers & matchingPreset) |
| { |
| VerifyOrReturnValue(delegate != nullptr, false); |
| |
| for (uint8_t i = 0; true; i++) |
| { |
| CHIP_ERROR err = delegate->GetPresetAtIndex(i, matchingPreset); |
| |
| if (err == CHIP_ERROR_PROVIDER_LIST_EXHAUSTED) |
| { |
| break; |
| } |
| if (err != CHIP_NO_ERROR) |
| { |
| ChipLogError(Zcl, "GetMatchingPresetInPresets: GetPresetAtIndex failed with error %" CHIP_ERROR_FORMAT, err.Format()); |
| return false; |
| } |
| |
| // Note: presets coming from our delegate always have a handle. |
| if (presetToMatch.presetHandle.Value().data_equal(matchingPreset.GetPresetHandle().Value())) |
| { |
| return true; |
| } |
| } |
| return false; |
| } |
| |
| /** |
| * @brief Checks if the given preset handle is present in the presets attribute |
| * @param[in] delegate The delegate to use. |
| * @param[in] presetHandleToMatch The preset handle to match with. |
| * |
| * @return true if the given preset handle is present in the presets attribute list, false otherwise. |
| */ |
| bool IsPresetHandlePresentInPresets(Delegate * delegate, const ByteSpan & presetHandleToMatch) |
| { |
| VerifyOrReturnValue(delegate != nullptr, false); |
| |
| PresetStructWithOwnedMembers matchingPreset; |
| for (uint8_t i = 0; true; i++) |
| { |
| CHIP_ERROR err = delegate->GetPresetAtIndex(i, matchingPreset); |
| |
| if (err == CHIP_ERROR_PROVIDER_LIST_EXHAUSTED) |
| { |
| return false; |
| } |
| |
| if (err != CHIP_NO_ERROR) |
| { |
| ChipLogError(Zcl, "IsPresetHandlePresentInPresets: GetPresetAtIndex failed with error %" CHIP_ERROR_FORMAT, |
| err.Format()); |
| return false; |
| } |
| |
| if (!matchingPreset.GetPresetHandle().IsNull() && matchingPreset.GetPresetHandle().Value().data_equal(presetHandleToMatch)) |
| { |
| return true; |
| } |
| } |
| return false; |
| } |
| |
| /** |
| * @brief Returns the length of the list of presets if the pending presets were to be applied. The size of the pending presets list |
| * calculated, after all the constraint checks are done, is the new size of the updated Presets attribute since the pending |
| * preset list is expected to have all existing presets with or without edits plus new presets. |
| * This is called before changes are actually applied. |
| * |
| * @param[in] delegate The delegate to use. |
| * |
| * @return count of the updated Presets attribute if the pending presets were applied to it. Return 0 for error cases. |
| */ |
| uint8_t CountNumberOfPendingPresets(Delegate * delegate) |
| { |
| uint8_t numberOfPendingPresets = 0; |
| |
| VerifyOrReturnValue(delegate != nullptr, 0); |
| |
| for (uint8_t i = 0; true; i++) |
| { |
| PresetStructWithOwnedMembers pendingPreset; |
| CHIP_ERROR err = delegate->GetPendingPresetAtIndex(i, pendingPreset); |
| |
| if (err == CHIP_ERROR_PROVIDER_LIST_EXHAUSTED) |
| { |
| break; |
| } |
| if (err != CHIP_NO_ERROR) |
| { |
| ChipLogError(Zcl, "CountNumberOfPendingPresets: GetPendingPresetAtIndex failed with error %" CHIP_ERROR_FORMAT, |
| err.Format()); |
| return 0; |
| } |
| numberOfPendingPresets++; |
| } |
| |
| return numberOfPendingPresets; |
| } |
| |
| /** |
| * @brief Checks if the presetScenario is present in the PresetTypes attribute. |
| * |
| * @param[in] delegate The delegate to use. |
| * @param[in] presetScenario The presetScenario to match with. |
| * |
| * @return true if the presetScenario is found, false otherwise. |
| */ |
| bool PresetScenarioExistsInPresetTypes(Delegate * delegate, PresetScenarioEnum presetScenario) |
| { |
| VerifyOrReturnValue(delegate != nullptr, false); |
| |
| for (uint8_t i = 0; true; i++) |
| { |
| PresetTypeStruct::Type presetType; |
| auto err = delegate->GetPresetTypeAtIndex(i, presetType); |
| if (err != CHIP_NO_ERROR) |
| { |
| return false; |
| } |
| |
| if (presetType.presetScenario == presetScenario) |
| { |
| return true; |
| } |
| } |
| return false; |
| } |
| |
| /** |
| * @brief Returns the count of preset entries in the pending presets list that have the matching presetHandle. |
| * @param[in] delegate The delegate to use. |
| * @param[in] presetHandleToMatch The preset handle to match. |
| * |
| * @return count of the number of presets found with the matching presetHandle. Returns 0 if no matching presets were found. |
| */ |
| uint8_t CountPresetsInPendingListWithPresetHandle(Delegate * delegate, const ByteSpan & presetHandleToMatch) |
| { |
| uint8_t count = 0; |
| VerifyOrReturnValue(delegate != nullptr, count); |
| |
| for (uint8_t i = 0; true; i++) |
| { |
| PresetStructWithOwnedMembers preset; |
| auto err = delegate->GetPendingPresetAtIndex(i, preset); |
| if (err != CHIP_NO_ERROR) |
| { |
| return count; |
| } |
| |
| DataModel::Nullable<ByteSpan> presetHandle = preset.GetPresetHandle(); |
| if (!presetHandle.IsNull() && presetHandle.Value().data_equal(presetHandleToMatch)) |
| { |
| count++; |
| } |
| } |
| return count; |
| } |
| |
| /** |
| * @brief Checks if the presetType for the given preset scenario supports name in the presetTypeFeatures bitmap. |
| * |
| * @param[in] delegate The delegate to use. |
| * @param[in] presetScenario The presetScenario to match with. |
| * |
| * @return true if the presetType for the given preset scenario supports name, false otherwise. |
| */ |
| bool PresetTypeSupportsNames(Delegate * delegate, PresetScenarioEnum scenario) |
| { |
| VerifyOrReturnValue(delegate != nullptr, false); |
| |
| for (uint8_t i = 0; true; i++) |
| { |
| PresetTypeStruct::Type presetType; |
| auto err = delegate->GetPresetTypeAtIndex(i, presetType); |
| if (err != CHIP_NO_ERROR) |
| { |
| return false; |
| } |
| |
| if (presetType.presetScenario == scenario) |
| { |
| return (presetType.presetTypeFeatures.Has(PresetTypeFeaturesBitmap::kSupportsNames)); |
| } |
| } |
| return false; |
| } |
| |
| int16_t EnforceHeatingSetpointLimits(int16_t HeatingSetpoint, EndpointId endpoint) |
| { |
| // Optional Mfg supplied limits |
| int16_t AbsMinHeatSetpointLimit = kDefaultAbsMinHeatSetpointLimit; |
| int16_t AbsMaxHeatSetpointLimit = kDefaultAbsMaxHeatSetpointLimit; |
| |
| // Optional User supplied limits |
| int16_t MinHeatSetpointLimit = kDefaultMinHeatSetpointLimit; |
| int16_t MaxHeatSetpointLimit = kDefaultMaxHeatSetpointLimit; |
| |
| // Attempt to read the setpoint limits |
| // Absmin/max are manufacturer limits |
| // min/max are user imposed min/max |
| |
| // Note that the limits are initialized above per the spec limits |
| // if they are not present Get() will not update the value so the defaults are used |
| imcode status; |
| |
| // https://github.com/CHIP-Specifications/connectedhomeip-spec/issues/3724 |
| // behavior is not specified when Abs * values are not present and user values are present |
| // implemented behavior accepts the user values without regard to default Abs values. |
| |
| // Per global matter data model policy |
| // if a attribute is not present then it's default shall be used. |
| |
| status = AbsMinHeatSetpointLimit::Get(endpoint, &AbsMinHeatSetpointLimit); |
| if (status != imcode::Success) |
| { |
| ChipLogError(Zcl, "Warning: AbsMinHeatSetpointLimit missing using default"); |
| } |
| |
| status = AbsMaxHeatSetpointLimit::Get(endpoint, &AbsMaxHeatSetpointLimit); |
| if (status != imcode::Success) |
| { |
| ChipLogError(Zcl, "Warning: AbsMaxHeatSetpointLimit missing using default"); |
| } |
| status = MinHeatSetpointLimit::Get(endpoint, &MinHeatSetpointLimit); |
| if (status != imcode::Success) |
| { |
| MinHeatSetpointLimit = AbsMinHeatSetpointLimit; |
| } |
| |
| status = MaxHeatSetpointLimit::Get(endpoint, &MaxHeatSetpointLimit); |
| if (status != imcode::Success) |
| { |
| MaxHeatSetpointLimit = AbsMaxHeatSetpointLimit; |
| } |
| |
| // Make sure the user imposed limits are within the manufacturer imposed limits |
| |
| // https://github.com/CHIP-Specifications/connectedhomeip-spec/issues/3725 |
| // Spec does not specify the behavior is the requested setpoint exceeds the limit allowed |
| // This implementation clamps at the limit. |
| |
| // resolution of 3725 is to clamp. |
| |
| if (MinHeatSetpointLimit < AbsMinHeatSetpointLimit) |
| MinHeatSetpointLimit = AbsMinHeatSetpointLimit; |
| |
| if (MaxHeatSetpointLimit > AbsMaxHeatSetpointLimit) |
| MaxHeatSetpointLimit = AbsMaxHeatSetpointLimit; |
| |
| if (HeatingSetpoint < MinHeatSetpointLimit) |
| HeatingSetpoint = MinHeatSetpointLimit; |
| |
| if (HeatingSetpoint > MaxHeatSetpointLimit) |
| HeatingSetpoint = MaxHeatSetpointLimit; |
| |
| return HeatingSetpoint; |
| } |
| |
| int16_t EnforceCoolingSetpointLimits(int16_t CoolingSetpoint, EndpointId endpoint) |
| { |
| // Optional Mfg supplied limits |
| int16_t AbsMinCoolSetpointLimit = kDefaultAbsMinCoolSetpointLimit; |
| int16_t AbsMaxCoolSetpointLimit = kDefaultAbsMaxCoolSetpointLimit; |
| |
| // Optional User supplied limits |
| int16_t MinCoolSetpointLimit = kDefaultMinCoolSetpointLimit; |
| int16_t MaxCoolSetpointLimit = kDefaultMaxCoolSetpointLimit; |
| |
| // Attempt to read the setpoint limits |
| // Absmin/max are manufacturer limits |
| // min/max are user imposed min/max |
| |
| // Note that the limits are initialized above per the spec limits |
| // if they are not present Get() will not update the value so the defaults are used |
| imcode status; |
| |
| // https://github.com/CHIP-Specifications/connectedhomeip-spec/issues/3724 |
| // behavior is not specified when Abs * values are not present and user values are present |
| // implemented behavior accepts the user values without regard to default Abs values. |
| |
| // Per global matter data model policy |
| // if a attribute is not present then it's default shall be used. |
| |
| status = AbsMinCoolSetpointLimit::Get(endpoint, &AbsMinCoolSetpointLimit); |
| if (status != imcode::Success) |
| { |
| ChipLogError(Zcl, "Warning: AbsMinCoolSetpointLimit missing using default"); |
| } |
| |
| status = AbsMaxCoolSetpointLimit::Get(endpoint, &AbsMaxCoolSetpointLimit); |
| if (status != imcode::Success) |
| { |
| ChipLogError(Zcl, "Warning: AbsMaxCoolSetpointLimit missing using default"); |
| } |
| |
| status = MinCoolSetpointLimit::Get(endpoint, &MinCoolSetpointLimit); |
| if (status != imcode::Success) |
| { |
| MinCoolSetpointLimit = AbsMinCoolSetpointLimit; |
| } |
| |
| status = MaxCoolSetpointLimit::Get(endpoint, &MaxCoolSetpointLimit); |
| if (status != imcode::Success) |
| { |
| MaxCoolSetpointLimit = AbsMaxCoolSetpointLimit; |
| } |
| |
| // Make sure the user imposed limits are within the manufacture imposed limits |
| // https://github.com/CHIP-Specifications/connectedhomeip-spec/issues/3725 |
| // Spec does not specify the behavior is the requested setpoint exceeds the limit allowed |
| // This implementation clamps at the limit. |
| |
| // resolution of 3725 is to clamp. |
| |
| if (MinCoolSetpointLimit < AbsMinCoolSetpointLimit) |
| MinCoolSetpointLimit = AbsMinCoolSetpointLimit; |
| |
| if (MaxCoolSetpointLimit > AbsMaxCoolSetpointLimit) |
| MaxCoolSetpointLimit = AbsMaxCoolSetpointLimit; |
| |
| if (CoolingSetpoint < MinCoolSetpointLimit) |
| CoolingSetpoint = MinCoolSetpointLimit; |
| |
| if (CoolingSetpoint > MaxCoolSetpointLimit) |
| CoolingSetpoint = MaxCoolSetpointLimit; |
| |
| return CoolingSetpoint; |
| } |
| |
| } // anonymous namespace |
| |
| namespace chip { |
| namespace app { |
| namespace Clusters { |
| namespace Thermostat { |
| |
| void SetDefaultDelegate(EndpointId endpoint, Delegate * delegate) |
| { |
| uint16_t ep = |
| emberAfGetClusterServerEndpointIndex(endpoint, Thermostat::Id, MATTER_DM_THERMOSTAT_CLUSTER_SERVER_ENDPOINT_COUNT); |
| // if endpoint is found, add the delegate in the delegate table |
| if (ep < ArraySize(gDelegateTable)) |
| { |
| gDelegateTable[ep] = delegate; |
| } |
| } |
| |
| void ThermostatAttrAccess::SetAtomicWrite(EndpointId endpoint, ScopedNodeId originatorNodeId, AtomicWriteState state) |
| { |
| uint16_t ep = |
| emberAfGetClusterServerEndpointIndex(endpoint, Thermostat::Id, MATTER_DM_THERMOSTAT_CLUSTER_SERVER_ENDPOINT_COUNT); |
| |
| if (ep < ArraySize(mAtomicWriteSessions)) |
| { |
| mAtomicWriteSessions[ep].state = state; |
| mAtomicWriteSessions[ep].endpointId = endpoint; |
| mAtomicWriteSessions[ep].nodeId = originatorNodeId; |
| } |
| } |
| |
| bool ThermostatAttrAccess::InAtomicWrite(EndpointId endpoint) |
| { |
| bool inAtomicWrite = false; |
| uint16_t ep = |
| emberAfGetClusterServerEndpointIndex(endpoint, Thermostat::Id, MATTER_DM_THERMOSTAT_CLUSTER_SERVER_ENDPOINT_COUNT); |
| |
| if (ep < ArraySize(mAtomicWriteSessions)) |
| { |
| inAtomicWrite = (mAtomicWriteSessions[ep].state == kAtomicWriteState_Open); |
| } |
| return inAtomicWrite; |
| } |
| |
| bool ThermostatAttrAccess::InAtomicWrite(const Access::SubjectDescriptor & subjectDescriptor, EndpointId endpoint) |
| { |
| if (!InAtomicWrite(endpoint)) |
| { |
| return false; |
| } |
| return subjectDescriptor.authMode == Access::AuthMode::kCase && |
| GetAtomicWriteScopedNodeId(endpoint) == ScopedNodeId(subjectDescriptor.subject, subjectDescriptor.fabricIndex); |
| } |
| |
| bool ThermostatAttrAccess::InAtomicWrite(CommandHandler * commandObj, EndpointId endpoint) |
| { |
| if (!InAtomicWrite(endpoint)) |
| { |
| return false; |
| } |
| ScopedNodeId sourceNodeId = GetSourceScopedNodeId(commandObj); |
| return GetAtomicWriteScopedNodeId(endpoint) == sourceNodeId; |
| } |
| |
| ScopedNodeId ThermostatAttrAccess::GetAtomicWriteScopedNodeId(EndpointId endpoint) |
| { |
| ScopedNodeId originatorNodeId = ScopedNodeId(); |
| uint16_t ep = |
| emberAfGetClusterServerEndpointIndex(endpoint, Thermostat::Id, MATTER_DM_THERMOSTAT_CLUSTER_SERVER_ENDPOINT_COUNT); |
| |
| if (ep < ArraySize(mAtomicWriteSessions)) |
| { |
| originatorNodeId = mAtomicWriteSessions[ep].nodeId; |
| } |
| return originatorNodeId; |
| } |
| |
| CHIP_ERROR ThermostatAttrAccess::Read(const ConcreteReadAttributePath & aPath, AttributeValueEncoder & aEncoder) |
| { |
| VerifyOrDie(aPath.mClusterId == Thermostat::Id); |
| |
| uint32_t ourFeatureMap; |
| bool localTemperatureNotExposedSupported = (FeatureMap::Get(aPath.mEndpointId, &ourFeatureMap) == imcode::Success) && |
| ((ourFeatureMap & to_underlying(Feature::kLocalTemperatureNotExposed)) != 0); |
| |
| switch (aPath.mAttributeId) |
| { |
| case LocalTemperature::Id: |
| if (localTemperatureNotExposedSupported) |
| { |
| return aEncoder.EncodeNull(); |
| } |
| break; |
| case RemoteSensing::Id: |
| if (localTemperatureNotExposedSupported) |
| { |
| BitMask<RemoteSensingBitmap> valueRemoteSensing; |
| imcode status = RemoteSensing::Get(aPath.mEndpointId, &valueRemoteSensing); |
| if (status != imcode::Success) |
| { |
| StatusIB statusIB(status); |
| return statusIB.ToChipError(); |
| } |
| valueRemoteSensing.Clear(RemoteSensingBitmap::kLocalTemperature); |
| return aEncoder.Encode(valueRemoteSensing); |
| } |
| break; |
| case PresetTypes::Id: { |
| auto delegate = GetDelegate(aPath.mEndpointId); |
| VerifyOrReturnError(delegate != nullptr, CHIP_ERROR_INCORRECT_STATE, ChipLogError(Zcl, "Delegate is null")); |
| |
| return aEncoder.EncodeList([delegate](const auto & encoder) -> CHIP_ERROR { |
| for (uint8_t i = 0; true; i++) |
| { |
| PresetTypeStruct::Type presetType; |
| auto err = delegate->GetPresetTypeAtIndex(i, presetType); |
| if (err == CHIP_ERROR_PROVIDER_LIST_EXHAUSTED) |
| { |
| return CHIP_NO_ERROR; |
| } |
| ReturnErrorOnFailure(err); |
| ReturnErrorOnFailure(encoder.Encode(presetType)); |
| } |
| }); |
| } |
| break; |
| case NumberOfPresets::Id: { |
| auto delegate = GetDelegate(aPath.mEndpointId); |
| VerifyOrReturnError(delegate != nullptr, CHIP_ERROR_INCORRECT_STATE, ChipLogError(Zcl, "Delegate is null")); |
| |
| ReturnErrorOnFailure(aEncoder.Encode(delegate->GetNumberOfPresets())); |
| } |
| break; |
| case Presets::Id: { |
| auto delegate = GetDelegate(aPath.mEndpointId); |
| VerifyOrReturnError(delegate != nullptr, CHIP_ERROR_INCORRECT_STATE, ChipLogError(Zcl, "Delegate is null")); |
| |
| auto & subjectDescriptor = aEncoder.GetSubjectDescriptor(); |
| if (InAtomicWrite(subjectDescriptor, aPath.mEndpointId)) |
| { |
| return aEncoder.EncodeList([delegate](const auto & encoder) -> CHIP_ERROR { |
| for (uint8_t i = 0; true; i++) |
| { |
| PresetStructWithOwnedMembers preset; |
| auto err = delegate->GetPendingPresetAtIndex(i, preset); |
| if (err == CHIP_ERROR_PROVIDER_LIST_EXHAUSTED) |
| { |
| return CHIP_NO_ERROR; |
| } |
| ReturnErrorOnFailure(err); |
| ReturnErrorOnFailure(encoder.Encode(preset)); |
| } |
| }); |
| } |
| return aEncoder.EncodeList([delegate](const auto & encoder) -> CHIP_ERROR { |
| for (uint8_t i = 0; true; i++) |
| { |
| PresetStructWithOwnedMembers preset; |
| auto err = delegate->GetPresetAtIndex(i, preset); |
| if (err == CHIP_ERROR_PROVIDER_LIST_EXHAUSTED) |
| { |
| return CHIP_NO_ERROR; |
| } |
| ReturnErrorOnFailure(err); |
| ReturnErrorOnFailure(encoder.Encode(preset)); |
| } |
| }); |
| } |
| break; |
| case ActivePresetHandle::Id: { |
| auto delegate = GetDelegate(aPath.mEndpointId); |
| VerifyOrReturnError(delegate != nullptr, CHIP_ERROR_INCORRECT_STATE, ChipLogError(Zcl, "Delegate is null")); |
| |
| uint8_t buffer[kPresetHandleSize]; |
| MutableByteSpan activePresetHandleSpan(buffer); |
| auto activePresetHandle = DataModel::MakeNullable(activePresetHandleSpan); |
| |
| CHIP_ERROR err = delegate->GetActivePresetHandle(activePresetHandle); |
| ReturnErrorOnFailure(err); |
| |
| ReturnErrorOnFailure(aEncoder.Encode(activePresetHandle)); |
| } |
| break; |
| case ScheduleTypes::Id: { |
| return aEncoder.EncodeList([](const auto & encoder) -> CHIP_ERROR { return CHIP_NO_ERROR; }); |
| } |
| break; |
| case Schedules::Id: { |
| return aEncoder.EncodeList([](const auto & encoder) -> CHIP_ERROR { return CHIP_NO_ERROR; }); |
| } |
| break; |
| default: // return CHIP_NO_ERROR and just read from the attribute store in default |
| break; |
| } |
| |
| return CHIP_NO_ERROR; |
| } |
| |
| CHIP_ERROR ThermostatAttrAccess::Write(const ConcreteDataAttributePath & aPath, AttributeValueDecoder & aDecoder) |
| { |
| VerifyOrDie(aPath.mClusterId == Thermostat::Id); |
| |
| EndpointId endpoint = aPath.mEndpointId; |
| auto & subjectDescriptor = aDecoder.GetSubjectDescriptor(); |
| |
| // Check atomic attributes first |
| switch (aPath.mAttributeId) |
| { |
| case Presets::Id: { |
| |
| auto delegate = GetDelegate(endpoint); |
| VerifyOrReturnError(delegate != nullptr, CHIP_ERROR_INCORRECT_STATE, ChipLogError(Zcl, "Delegate is null")); |
| |
| // Presets are not editable, return INVALID_IN_STATE. |
| VerifyOrReturnError(InAtomicWrite(endpoint), CHIP_IM_GLOBAL_STATUS(InvalidInState), |
| ChipLogError(Zcl, "Presets are not editable")); |
| |
| // OK, we're in an atomic write, make sure the requesting node is the same one that started the atomic write, |
| // otherwise return BUSY. |
| if (!InAtomicWrite(subjectDescriptor, endpoint)) |
| { |
| ChipLogError(Zcl, "Another node is editing presets. Server is busy. Try again later"); |
| return CHIP_IM_GLOBAL_STATUS(Busy); |
| } |
| |
| // If the list operation is replace all, clear the existing pending list, iterate over the new presets list |
| // and add to the pending presets list. |
| if (!aPath.IsListOperation() || aPath.mListOp == ConcreteDataAttributePath::ListOperation::ReplaceAll) |
| { |
| // Clear the pending presets list |
| delegate->ClearPendingPresetList(); |
| |
| Presets::TypeInfo::DecodableType newPresetsList; |
| ReturnErrorOnFailure(aDecoder.Decode(newPresetsList)); |
| |
| // Iterate over the presets and call the delegate to append to the list of pending presets. |
| auto iter = newPresetsList.begin(); |
| while (iter.Next()) |
| { |
| const PresetStruct::Type & preset = iter.GetValue(); |
| ReturnErrorOnFailure(AppendPendingPreset(delegate, preset)); |
| } |
| return iter.GetStatus(); |
| } |
| |
| // If the list operation is AppendItem, call the delegate to append the item to the list of pending presets. |
| if (aPath.mListOp == ConcreteDataAttributePath::ListOperation::AppendItem) |
| { |
| PresetStruct::Type preset; |
| ReturnErrorOnFailure(aDecoder.Decode(preset)); |
| return AppendPendingPreset(delegate, preset); |
| } |
| } |
| break; |
| case Schedules::Id: { |
| return CHIP_ERROR_NOT_IMPLEMENTED; |
| } |
| break; |
| } |
| |
| // This is not an atomic attribute, so check to make sure we don't have an atomic write going for this client |
| if (InAtomicWrite(subjectDescriptor, endpoint)) |
| { |
| ChipLogError(Zcl, "Can not write to non-atomic attributes during atomic write"); |
| return CHIP_IM_GLOBAL_STATUS(InvalidInState); |
| } |
| |
| uint32_t ourFeatureMap; |
| bool localTemperatureNotExposedSupported = (FeatureMap::Get(aPath.mEndpointId, &ourFeatureMap) == imcode::Success) && |
| ((ourFeatureMap & to_underlying(Feature::kLocalTemperatureNotExposed)) != 0); |
| |
| switch (aPath.mAttributeId) |
| { |
| case RemoteSensing::Id: |
| if (localTemperatureNotExposedSupported) |
| { |
| uint8_t valueRemoteSensing; |
| ReturnErrorOnFailure(aDecoder.Decode(valueRemoteSensing)); |
| if (valueRemoteSensing & 0x01) // If setting bit 1 (LocalTemperature RemoteSensing bit) |
| { |
| return CHIP_IM_GLOBAL_STATUS(ConstraintError); |
| } |
| imcode status = RemoteSensing::Set(aPath.mEndpointId, valueRemoteSensing); |
| StatusIB statusIB(status); |
| return statusIB.ToChipError(); |
| } |
| break; |
| |
| default: // return CHIP_NO_ERROR and just write to the attribute store in default |
| break; |
| } |
| |
| return CHIP_NO_ERROR; |
| } |
| |
| CHIP_ERROR ThermostatAttrAccess::AppendPendingPreset(Thermostat::Delegate * delegate, const PresetStruct::Type & preset) |
| { |
| if (!IsValidPresetEntry(preset)) |
| { |
| return CHIP_IM_GLOBAL_STATUS(ConstraintError); |
| } |
| |
| if (preset.presetHandle.IsNull()) |
| { |
| if (IsBuiltIn(preset)) |
| { |
| return CHIP_IM_GLOBAL_STATUS(ConstraintError); |
| } |
| } |
| else |
| { |
| auto & presetHandle = preset.presetHandle.Value(); |
| |
| // Per spec we need to check that: |
| // (a) There is an existing non-pending preset with this handle. |
| PresetStructWithOwnedMembers matchingPreset; |
| if (!GetMatchingPresetInPresets(delegate, preset, matchingPreset)) |
| { |
| return CHIP_IM_GLOBAL_STATUS(NotFound); |
| } |
| |
| // (b) There is no existing pending preset with this handle. |
| if (CountPresetsInPendingListWithPresetHandle(delegate, presetHandle) > 0) |
| { |
| return CHIP_IM_GLOBAL_STATUS(ConstraintError); |
| } |
| |
| // (c)/(d) The built-in fields do not have a mismatch. |
| // TODO: What's the story with nullability on the BuiltIn field? |
| if (!preset.builtIn.IsNull() && !matchingPreset.GetBuiltIn().IsNull() && |
| preset.builtIn.Value() != matchingPreset.GetBuiltIn().Value()) |
| { |
| return CHIP_IM_GLOBAL_STATUS(ConstraintError); |
| } |
| } |
| |
| if (!PresetScenarioExistsInPresetTypes(delegate, preset.presetScenario)) |
| { |
| return CHIP_IM_GLOBAL_STATUS(ConstraintError); |
| } |
| |
| if (preset.name.HasValue() && !PresetTypeSupportsNames(delegate, preset.presetScenario)) |
| { |
| return CHIP_IM_GLOBAL_STATUS(ConstraintError); |
| } |
| |
| return delegate->AppendToPendingPresetList(preset); |
| } |
| |
| void ThermostatAttrAccess::OnFabricRemoved(const FabricTable & fabricTable, FabricIndex fabricIndex) |
| { |
| for (size_t i = 0; i < ArraySize(mAtomicWriteSessions); ++i) |
| { |
| auto atomicWriteState = mAtomicWriteSessions[i]; |
| if (atomicWriteState.state == kAtomicWriteState_Open && atomicWriteState.nodeId.GetFabricIndex() == fabricIndex) |
| { |
| auto delegate = GetDelegate(atomicWriteState.endpointId); |
| if (delegate == nullptr) |
| { |
| continue; |
| } |
| resetAtomicWrite(delegate, atomicWriteState.endpointId); |
| } |
| } |
| } |
| |
| } // namespace Thermostat |
| } // namespace Clusters |
| } // namespace app |
| } // namespace chip |
| |
| void emberAfThermostatClusterServerInitCallback(chip::EndpointId endpoint) |
| { |
| // TODO |
| // Get from the "real thermostat" |
| // current mode |
| // current occupied heating setpoint |
| // current unoccupied heating setpoint |
| // current occupied cooling setpoint |
| // current unoccupied cooling setpoint |
| // and update the zcl cluster values |
| // This should be a callback defined function |
| // with weak binding so that real thermostat |
| // can get the values. |
| // or should this just be the responsibility of the thermostat application? |
| } |
| |
| Protocols::InteractionModel::Status |
| MatterThermostatClusterServerPreAttributeChangedCallback(const app::ConcreteAttributePath & attributePath, |
| EmberAfAttributeType attributeType, uint16_t size, uint8_t * value) |
| { |
| EndpointId endpoint = attributePath.mEndpointId; |
| int16_t requested; |
| |
| // Limits will be needed for all checks |
| // so we just get them all now |
| int16_t AbsMinHeatSetpointLimit; |
| int16_t AbsMaxHeatSetpointLimit; |
| int16_t MinHeatSetpointLimit; |
| int16_t MaxHeatSetpointLimit; |
| int16_t AbsMinCoolSetpointLimit; |
| int16_t AbsMaxCoolSetpointLimit; |
| int16_t MinCoolSetpointLimit; |
| int16_t MaxCoolSetpointLimit; |
| int8_t DeadBand = 0; |
| int16_t DeadBandTemp = 0; |
| int16_t OccupiedCoolingSetpoint; |
| int16_t OccupiedHeatingSetpoint; |
| int16_t UnoccupiedCoolingSetpoint; |
| int16_t UnoccupiedHeatingSetpoint; |
| uint32_t OurFeatureMap; |
| bool AutoSupported = false; |
| bool HeatSupported = false; |
| bool CoolSupported = false; |
| bool OccupancySupported = false; |
| |
| if (FeatureMap::Get(endpoint, &OurFeatureMap) != imcode::Success) |
| OurFeatureMap = FEATURE_MAP_DEFAULT; |
| |
| if (OurFeatureMap & 1 << 5) // Bit 5 is Auto Mode supported |
| AutoSupported = true; |
| |
| if (OurFeatureMap & 1 << 0) |
| HeatSupported = true; |
| |
| if (OurFeatureMap & 1 << 1) |
| CoolSupported = true; |
| |
| if (OurFeatureMap & 1 << 2) |
| OccupancySupported = true; |
| |
| if (AutoSupported) |
| { |
| if (MinSetpointDeadBand::Get(endpoint, &DeadBand) != imcode::Success) |
| { |
| DeadBand = kDefaultDeadBand; |
| } |
| DeadBandTemp = static_cast<int16_t>(DeadBand * 10); |
| } |
| |
| if (AbsMinCoolSetpointLimit::Get(endpoint, &AbsMinCoolSetpointLimit) != imcode::Success) |
| AbsMinCoolSetpointLimit = kDefaultAbsMinCoolSetpointLimit; |
| |
| if (AbsMaxCoolSetpointLimit::Get(endpoint, &AbsMaxCoolSetpointLimit) != imcode::Success) |
| AbsMaxCoolSetpointLimit = kDefaultAbsMaxCoolSetpointLimit; |
| |
| if (MinCoolSetpointLimit::Get(endpoint, &MinCoolSetpointLimit) != imcode::Success) |
| MinCoolSetpointLimit = AbsMinCoolSetpointLimit; |
| |
| if (MaxCoolSetpointLimit::Get(endpoint, &MaxCoolSetpointLimit) != imcode::Success) |
| MaxCoolSetpointLimit = AbsMaxCoolSetpointLimit; |
| |
| if (AbsMinHeatSetpointLimit::Get(endpoint, &AbsMinHeatSetpointLimit) != imcode::Success) |
| AbsMinHeatSetpointLimit = kDefaultAbsMinHeatSetpointLimit; |
| |
| if (AbsMaxHeatSetpointLimit::Get(endpoint, &AbsMaxHeatSetpointLimit) != imcode::Success) |
| AbsMaxHeatSetpointLimit = kDefaultAbsMaxHeatSetpointLimit; |
| |
| if (MinHeatSetpointLimit::Get(endpoint, &MinHeatSetpointLimit) != imcode::Success) |
| MinHeatSetpointLimit = AbsMinHeatSetpointLimit; |
| |
| if (MaxHeatSetpointLimit::Get(endpoint, &MaxHeatSetpointLimit) != imcode::Success) |
| MaxHeatSetpointLimit = AbsMaxHeatSetpointLimit; |
| |
| if (CoolSupported) |
| if (OccupiedCoolingSetpoint::Get(endpoint, &OccupiedCoolingSetpoint) != imcode::Success) |
| { |
| ChipLogError(Zcl, "Error: Can not read Occupied Cooling Setpoint"); |
| return imcode::Failure; |
| } |
| |
| if (HeatSupported) |
| if (OccupiedHeatingSetpoint::Get(endpoint, &OccupiedHeatingSetpoint) != imcode::Success) |
| { |
| ChipLogError(Zcl, "Error: Can not read Occupied Heating Setpoint"); |
| return imcode::Failure; |
| } |
| |
| if (CoolSupported && OccupancySupported) |
| if (UnoccupiedCoolingSetpoint::Get(endpoint, &UnoccupiedCoolingSetpoint) != imcode::Success) |
| { |
| ChipLogError(Zcl, "Error: Can not read Unoccupied Cooling Setpoint"); |
| return imcode::Failure; |
| } |
| |
| if (HeatSupported && OccupancySupported) |
| if (UnoccupiedHeatingSetpoint::Get(endpoint, &UnoccupiedHeatingSetpoint) != imcode::Success) |
| { |
| ChipLogError(Zcl, "Error: Can not read Unoccupied Heating Setpoint"); |
| return imcode::Failure; |
| } |
| |
| switch (attributePath.mAttributeId) |
| { |
| case OccupiedHeatingSetpoint::Id: { |
| requested = static_cast<int16_t>(chip::Encoding::LittleEndian::Get16(value)); |
| if (!HeatSupported) |
| return imcode::UnsupportedAttribute; |
| if (requested < AbsMinHeatSetpointLimit || requested < MinHeatSetpointLimit || requested > AbsMaxHeatSetpointLimit || |
| requested > MaxHeatSetpointLimit) |
| return imcode::InvalidValue; |
| if (AutoSupported) |
| { |
| if (requested > OccupiedCoolingSetpoint - DeadBandTemp) |
| return imcode::InvalidValue; |
| } |
| return imcode::Success; |
| } |
| |
| case OccupiedCoolingSetpoint::Id: { |
| requested = static_cast<int16_t>(chip::Encoding::LittleEndian::Get16(value)); |
| if (!CoolSupported) |
| return imcode::UnsupportedAttribute; |
| if (requested < AbsMinCoolSetpointLimit || requested < MinCoolSetpointLimit || requested > AbsMaxCoolSetpointLimit || |
| requested > MaxCoolSetpointLimit) |
| return imcode::InvalidValue; |
| if (AutoSupported) |
| { |
| if (requested < OccupiedHeatingSetpoint + DeadBandTemp) |
| return imcode::InvalidValue; |
| } |
| return imcode::Success; |
| } |
| |
| case UnoccupiedHeatingSetpoint::Id: { |
| requested = static_cast<int16_t>(chip::Encoding::LittleEndian::Get16(value)); |
| if (!(HeatSupported && OccupancySupported)) |
| return imcode::UnsupportedAttribute; |
| if (requested < AbsMinHeatSetpointLimit || requested < MinHeatSetpointLimit || requested > AbsMaxHeatSetpointLimit || |
| requested > MaxHeatSetpointLimit) |
| return imcode::InvalidValue; |
| if (AutoSupported) |
| { |
| if (requested > UnoccupiedCoolingSetpoint - DeadBandTemp) |
| return imcode::InvalidValue; |
| } |
| return imcode::Success; |
| } |
| case UnoccupiedCoolingSetpoint::Id: { |
| requested = static_cast<int16_t>(chip::Encoding::LittleEndian::Get16(value)); |
| if (!(CoolSupported && OccupancySupported)) |
| return imcode::UnsupportedAttribute; |
| if (requested < AbsMinCoolSetpointLimit || requested < MinCoolSetpointLimit || requested > AbsMaxCoolSetpointLimit || |
| requested > MaxCoolSetpointLimit) |
| return imcode::InvalidValue; |
| if (AutoSupported) |
| { |
| if (requested < UnoccupiedHeatingSetpoint + DeadBandTemp) |
| return imcode::InvalidValue; |
| } |
| return imcode::Success; |
| } |
| |
| case MinHeatSetpointLimit::Id: { |
| requested = static_cast<int16_t>(chip::Encoding::LittleEndian::Get16(value)); |
| if (!HeatSupported) |
| return imcode::UnsupportedAttribute; |
| if (requested < AbsMinHeatSetpointLimit || requested > MaxHeatSetpointLimit || requested > AbsMaxHeatSetpointLimit) |
| return imcode::InvalidValue; |
| if (AutoSupported) |
| { |
| if (requested > MinCoolSetpointLimit - DeadBandTemp) |
| return imcode::InvalidValue; |
| } |
| return imcode::Success; |
| } |
| case MaxHeatSetpointLimit::Id: { |
| requested = static_cast<int16_t>(chip::Encoding::LittleEndian::Get16(value)); |
| if (!HeatSupported) |
| return imcode::UnsupportedAttribute; |
| if (requested < AbsMinHeatSetpointLimit || requested < MinHeatSetpointLimit || requested > AbsMaxHeatSetpointLimit) |
| return imcode::InvalidValue; |
| if (AutoSupported) |
| { |
| if (requested > MaxCoolSetpointLimit - DeadBandTemp) |
| return imcode::InvalidValue; |
| } |
| return imcode::Success; |
| } |
| case MinCoolSetpointLimit::Id: { |
| requested = static_cast<int16_t>(chip::Encoding::LittleEndian::Get16(value)); |
| if (!CoolSupported) |
| return imcode::UnsupportedAttribute; |
| if (requested < AbsMinCoolSetpointLimit || requested > MaxCoolSetpointLimit || requested > AbsMaxCoolSetpointLimit) |
| return imcode::InvalidValue; |
| if (AutoSupported) |
| { |
| if (requested < MinHeatSetpointLimit + DeadBandTemp) |
| return imcode::InvalidValue; |
| } |
| return imcode::Success; |
| } |
| case MaxCoolSetpointLimit::Id: { |
| requested = static_cast<int16_t>(chip::Encoding::LittleEndian::Get16(value)); |
| if (!CoolSupported) |
| return imcode::UnsupportedAttribute; |
| if (requested < AbsMinCoolSetpointLimit || requested < MinCoolSetpointLimit || requested > AbsMaxCoolSetpointLimit) |
| return imcode::InvalidValue; |
| if (AutoSupported) |
| { |
| if (requested < MaxHeatSetpointLimit + DeadBandTemp) |
| return imcode::InvalidValue; |
| } |
| return imcode::Success; |
| } |
| case MinSetpointDeadBand::Id: { |
| requested = *value; |
| if (!AutoSupported) |
| return imcode::UnsupportedAttribute; |
| if (requested < 0 || requested > 25) |
| return imcode::InvalidValue; |
| return imcode::Success; |
| } |
| |
| case ControlSequenceOfOperation::Id: { |
| uint8_t requestedCSO; |
| requestedCSO = *value; |
| if (requestedCSO > to_underlying(ControlSequenceOfOperationEnum::kCoolingAndHeatingWithReheat)) |
| return imcode::InvalidValue; |
| return imcode::Success; |
| } |
| |
| case SystemMode::Id: { |
| ControlSequenceOfOperationEnum ControlSequenceOfOperation; |
| imcode status = ControlSequenceOfOperation::Get(endpoint, &ControlSequenceOfOperation); |
| if (status != imcode::Success) |
| { |
| return imcode::InvalidValue; |
| } |
| auto RequestedSystemMode = static_cast<SystemModeEnum>(*value); |
| if (ControlSequenceOfOperation > ControlSequenceOfOperationEnum::kCoolingAndHeatingWithReheat || |
| RequestedSystemMode > SystemModeEnum::kFanOnly) |
| { |
| return imcode::InvalidValue; |
| } |
| |
| switch (ControlSequenceOfOperation) |
| { |
| case ControlSequenceOfOperationEnum::kCoolingOnly: |
| case ControlSequenceOfOperationEnum::kCoolingWithReheat: |
| if (RequestedSystemMode == SystemModeEnum::kHeat || RequestedSystemMode == SystemModeEnum::kEmergencyHeat) |
| return imcode::InvalidValue; |
| else |
| return imcode::Success; |
| |
| case ControlSequenceOfOperationEnum::kHeatingOnly: |
| case ControlSequenceOfOperationEnum::kHeatingWithReheat: |
| if (RequestedSystemMode == SystemModeEnum::kCool || RequestedSystemMode == SystemModeEnum::kPrecooling) |
| return imcode::InvalidValue; |
| else |
| return imcode::Success; |
| default: |
| return imcode::Success; |
| } |
| } |
| default: |
| return imcode::Success; |
| } |
| } |
| |
| bool emberAfThermostatClusterClearWeeklyScheduleCallback(app::CommandHandler * commandObj, |
| const app::ConcreteCommandPath & commandPath, |
| const Commands::ClearWeeklySchedule::DecodableType & commandData) |
| { |
| // TODO |
| return false; |
| } |
| |
| bool emberAfThermostatClusterGetWeeklyScheduleCallback(app::CommandHandler * commandObj, |
| const app::ConcreteCommandPath & commandPath, |
| const Commands::GetWeeklySchedule::DecodableType & commandData) |
| { |
| // TODO |
| return false; |
| } |
| |
| bool emberAfThermostatClusterSetWeeklyScheduleCallback(app::CommandHandler * commandObj, |
| const app::ConcreteCommandPath & commandPath, |
| const Commands::SetWeeklySchedule::DecodableType & commandData) |
| { |
| // TODO |
| return false; |
| } |
| |
| bool emberAfThermostatClusterSetActiveScheduleRequestCallback( |
| CommandHandler * commandObj, const ConcreteCommandPath & commandPath, |
| const Clusters::Thermostat::Commands::SetActiveScheduleRequest::DecodableType & commandData) |
| { |
| // TODO |
| return false; |
| } |
| |
| bool emberAfThermostatClusterSetActivePresetRequestCallback( |
| CommandHandler * commandObj, const ConcreteCommandPath & commandPath, |
| const Clusters::Thermostat::Commands::SetActivePresetRequest::DecodableType & commandData) |
| { |
| EndpointId endpoint = commandPath.mEndpointId; |
| Delegate * delegate = GetDelegate(endpoint); |
| |
| if (delegate == nullptr) |
| { |
| ChipLogError(Zcl, "Delegate is null"); |
| commandObj->AddStatus(commandPath, imcode::InvalidInState); |
| return true; |
| } |
| |
| DataModel::Nullable<ByteSpan> newPresetHandle = commandData.presetHandle; |
| |
| // If the preset handle passed in the command is not present in the Presets attribute, return INVALID_COMMAND. |
| if (!newPresetHandle.IsNull() && !IsPresetHandlePresentInPresets(delegate, newPresetHandle.Value())) |
| { |
| commandObj->AddStatus(commandPath, imcode::InvalidCommand); |
| return true; |
| } |
| |
| CHIP_ERROR err = delegate->SetActivePresetHandle(newPresetHandle); |
| |
| if (err != CHIP_NO_ERROR) |
| { |
| ChipLogError(Zcl, "Failed to set ActivePresetHandle with error %" CHIP_ERROR_FORMAT, err.Format()); |
| commandObj->AddStatus(commandPath, StatusIB(err).mStatus); |
| return true; |
| } |
| |
| commandObj->AddStatus(commandPath, imcode::Success); |
| return true; |
| } |
| |
| bool validAtomicAttributes(const Commands::AtomicRequest::DecodableType & commandData, bool requireBoth) |
| { |
| auto attributeIdsIter = commandData.attributeRequests.begin(); |
| bool requestedPresets = false, requestedSchedules = false; |
| while (attributeIdsIter.Next()) |
| { |
| auto & attributeId = attributeIdsIter.GetValue(); |
| |
| switch (attributeId) |
| { |
| case Presets::Id: |
| if (requestedPresets) // Double-requesting an attribute is invalid |
| { |
| return false; |
| } |
| requestedPresets = true; |
| break; |
| case Schedules::Id: |
| if (requestedSchedules) // Double-requesting an attribute is invalid |
| { |
| return false; |
| } |
| requestedSchedules = true; |
| break; |
| default: |
| return false; |
| } |
| } |
| if (attributeIdsIter.GetStatus() != CHIP_NO_ERROR) |
| { |
| return false; |
| } |
| if (requireBoth) |
| { |
| return (requestedPresets && requestedSchedules); |
| } |
| // If the atomic request doesn't contain at least one of these attributes, it's invalid |
| return (requestedPresets || requestedSchedules); |
| } |
| |
| void sendAtomicResponse(CommandHandler * commandObj, const ConcreteCommandPath & commandPath, imcode status, imcode presetsStatus, |
| imcode schedulesStatus, Optional<uint16_t> timeout = NullOptional) |
| { |
| Commands::AtomicResponse::Type response; |
| Globals::Structs::AtomicAttributeStatusStruct::Type attributeStatus[] = { |
| { .attributeID = Presets::Id, .statusCode = to_underlying(presetsStatus) }, |
| { .attributeID = Schedules::Id, .statusCode = to_underlying(schedulesStatus) } |
| }; |
| response.statusCode = to_underlying(status); |
| response.attributeStatus = attributeStatus; |
| response.timeout = timeout; |
| commandObj->AddResponse(commandPath, response); |
| } |
| |
| void handleAtomicBegin(CommandHandler * commandObj, const ConcreteCommandPath & commandPath, |
| const Commands::AtomicRequest::DecodableType & commandData) |
| { |
| EndpointId endpoint = commandPath.mEndpointId; |
| |
| Delegate * delegate = GetDelegate(endpoint); |
| |
| if (delegate == nullptr) |
| { |
| ChipLogError(Zcl, "Delegate is null"); |
| commandObj->AddStatus(commandPath, imcode::InvalidInState); |
| return; |
| } |
| |
| if (gThermostatAttrAccess.InAtomicWrite(commandObj, endpoint)) |
| { |
| // This client already has an open atomic write |
| commandObj->AddStatus(commandPath, imcode::InvalidInState); |
| return; |
| } |
| |
| if (!commandData.timeout.HasValue()) |
| { |
| commandObj->AddStatus(commandPath, imcode::InvalidCommand); |
| return; |
| } |
| |
| if (!validAtomicAttributes(commandData, false)) |
| { |
| commandObj->AddStatus(commandPath, imcode::InvalidCommand); |
| return; |
| } |
| |
| if (gThermostatAttrAccess.InAtomicWrite(endpoint)) |
| { |
| sendAtomicResponse(commandObj, commandPath, imcode::Failure, imcode::Busy, imcode::Busy); |
| return; |
| } |
| |
| // This is a valid request to open an atomic write. Tell the delegate it |
| // needs to keep track of a pending preset list now. |
| delegate->InitializePendingPresets(); |
| |
| auto timeout = |
| delegate->GetAtomicWriteTimeout(commandData.attributeRequests, System::Clock::Milliseconds16(commandData.timeout.Value())); |
| |
| if (!timeout.has_value()) |
| { |
| commandObj->AddStatus(commandPath, imcode::InvalidCommand); |
| return; |
| } |
| ScheduleTimer(endpoint, timeout.value()); |
| gThermostatAttrAccess.SetAtomicWrite(endpoint, GetSourceScopedNodeId(commandObj), kAtomicWriteState_Open); |
| sendAtomicResponse(commandObj, commandPath, imcode::Success, imcode::Success, imcode::Success, |
| MakeOptional(timeout.value().count())); |
| } |
| |
| imcode commitPresets(Delegate * delegate, EndpointId endpoint) |
| { |
| CHIP_ERROR err = CHIP_NO_ERROR; |
| |
| // For each preset in the presets attribute, check that the matching preset in the pending presets list does not |
| // violate any spec constraints. |
| for (uint8_t i = 0; true; i++) |
| { |
| PresetStructWithOwnedMembers preset; |
| err = delegate->GetPresetAtIndex(i, preset); |
| |
| if (err == CHIP_ERROR_PROVIDER_LIST_EXHAUSTED) |
| { |
| break; |
| } |
| if (err != CHIP_NO_ERROR) |
| { |
| ChipLogError(Zcl, |
| "emberAfThermostatClusterCommitPresetsSchedulesRequestCallback: GetPresetAtIndex failed with error " |
| "%" CHIP_ERROR_FORMAT, |
| err.Format()); |
| return imcode::InvalidInState; |
| } |
| |
| bool found = MatchingPendingPresetExists(delegate, preset); |
| |
| // If a built in preset in the Presets attribute list is removed and not found in the pending presets list, return |
| // CONSTRAINT_ERROR. |
| if (IsBuiltIn(preset) && !found) |
| { |
| return imcode::ConstraintError; |
| } |
| } |
| |
| // If there is an ActivePresetHandle set, find the preset in the pending presets list that matches the ActivePresetHandle |
| // attribute. If a preset is not found with the same presetHandle, return INVALID_IN_STATE. If there is no ActivePresetHandle |
| // attribute set, continue with other checks. |
| uint8_t buffer[kPresetHandleSize]; |
| MutableByteSpan activePresetHandleSpan(buffer); |
| auto activePresetHandle = DataModel::MakeNullable(activePresetHandleSpan); |
| |
| err = delegate->GetActivePresetHandle(activePresetHandle); |
| |
| if (err != CHIP_NO_ERROR) |
| { |
| return imcode::InvalidInState; |
| } |
| |
| if (!activePresetHandle.IsNull()) |
| { |
| uint8_t count = CountPresetsInPendingListWithPresetHandle(delegate, activePresetHandle.Value()); |
| if (count == 0) |
| { |
| return imcode::InvalidInState; |
| } |
| } |
| |
| // For each preset in the pending presets list, check that the preset does not violate any spec constraints. |
| for (uint8_t i = 0; true; i++) |
| { |
| PresetStructWithOwnedMembers pendingPreset; |
| err = delegate->GetPendingPresetAtIndex(i, pendingPreset); |
| |
| if (err == CHIP_ERROR_PROVIDER_LIST_EXHAUSTED) |
| { |
| break; |
| } |
| if (err != CHIP_NO_ERROR) |
| { |
| ChipLogError(Zcl, |
| "emberAfThermostatClusterCommitPresetsSchedulesRequestCallback: GetPendingPresetAtIndex failed with error " |
| "%" CHIP_ERROR_FORMAT, |
| err.Format()); |
| return imcode::InvalidInState; |
| } |
| |
| // Enforce the Setpoint Limits for both the cooling and heating setpoints in the pending preset. |
| // TODO: This code does not work, because it's modifying our temporary copy. |
| Optional<int16_t> coolingSetpointValue = pendingPreset.GetCoolingSetpoint(); |
| if (coolingSetpointValue.HasValue()) |
| { |
| pendingPreset.SetCoolingSetpoint(MakeOptional(EnforceCoolingSetpointLimits(coolingSetpointValue.Value(), endpoint))); |
| } |
| |
| Optional<int16_t> heatingSetpointValue = pendingPreset.GetHeatingSetpoint(); |
| if (heatingSetpointValue.HasValue()) |
| { |
| pendingPreset.SetHeatingSetpoint(MakeOptional(EnforceHeatingSetpointLimits(heatingSetpointValue.Value(), endpoint))); |
| } |
| } |
| |
| uint8_t totalCount = CountNumberOfPendingPresets(delegate); |
| |
| uint8_t numberOfPresetsSupported = delegate->GetNumberOfPresets(); |
| |
| if (numberOfPresetsSupported == 0) |
| { |
| ChipLogError(Zcl, "emberAfThermostatClusterCommitPresetsSchedulesRequestCallback: Failed to get NumberOfPresets"); |
| return imcode::InvalidInState; |
| } |
| |
| // If the expected length of the presets attribute with the applied changes exceeds the total number of presets supported, |
| // return RESOURCE_EXHAUSTED. Note that the changes are not yet applied. |
| if (numberOfPresetsSupported > 0 && totalCount > numberOfPresetsSupported) |
| { |
| return imcode::ResourceExhausted; |
| } |
| |
| // TODO: Check if the number of presets for each presetScenario exceeds the max number of presets supported for that |
| // scenario. We plan to support only one preset for each presetScenario for our use cases so defer this for re-evaluation. |
| |
| // Call the delegate API to apply the pending presets to the presets attribute and update it. |
| err = delegate->ApplyPendingPresets(); |
| |
| if (err != CHIP_NO_ERROR) |
| { |
| return imcode::InvalidInState; |
| } |
| |
| return imcode::Success; |
| } |
| |
| void handleAtomicCommit(CommandHandler * commandObj, const ConcreteCommandPath & commandPath, |
| const Commands::AtomicRequest::DecodableType & commandData) |
| { |
| if (!validAtomicAttributes(commandData, true)) |
| { |
| commandObj->AddStatus(commandPath, imcode::InvalidCommand); |
| return; |
| } |
| EndpointId endpoint = commandPath.mEndpointId; |
| bool inAtomicWrite = gThermostatAttrAccess.InAtomicWrite(commandObj, endpoint); |
| if (!inAtomicWrite) |
| { |
| commandObj->AddStatus(commandPath, imcode::InvalidInState); |
| return; |
| } |
| |
| Delegate * delegate = GetDelegate(endpoint); |
| |
| if (delegate == nullptr) |
| { |
| ChipLogError(Zcl, "Delegate is null"); |
| commandObj->AddStatus(commandPath, imcode::InvalidInState); |
| return; |
| } |
| |
| auto presetsStatus = commitPresets(delegate, endpoint); |
| // TODO: copy over schedules code |
| auto schedulesStatus = imcode::Success; |
| resetAtomicWrite(delegate, endpoint); |
| imcode status = (presetsStatus == imcode::Success && schedulesStatus == imcode::Success) ? imcode::Success : imcode::Failure; |
| sendAtomicResponse(commandObj, commandPath, status, presetsStatus, schedulesStatus); |
| } |
| |
| void handleAtomicRollback(CommandHandler * commandObj, const ConcreteCommandPath & commandPath, |
| const Commands::AtomicRequest::DecodableType & commandData) |
| { |
| if (!validAtomicAttributes(commandData, true)) |
| { |
| commandObj->AddStatus(commandPath, imcode::InvalidCommand); |
| return; |
| } |
| EndpointId endpoint = commandPath.mEndpointId; |
| bool inAtomicWrite = gThermostatAttrAccess.InAtomicWrite(commandObj, endpoint); |
| if (!inAtomicWrite) |
| { |
| commandObj->AddStatus(commandPath, imcode::InvalidInState); |
| return; |
| } |
| |
| Delegate * delegate = GetDelegate(endpoint); |
| |
| if (delegate == nullptr) |
| { |
| ChipLogError(Zcl, "Delegate is null"); |
| commandObj->AddStatus(commandPath, imcode::InvalidInState); |
| return; |
| } |
| resetAtomicWrite(delegate, endpoint); |
| sendAtomicResponse(commandObj, commandPath, imcode::Success, imcode::Success, imcode::Success); |
| } |
| |
| bool emberAfThermostatClusterAtomicRequestCallback(CommandHandler * commandObj, const ConcreteCommandPath & commandPath, |
| const Clusters::Thermostat::Commands::AtomicRequest::DecodableType & commandData) |
| { |
| auto & requestType = commandData.requestType; |
| |
| // If we've gotten this far, then the client has manage permission to call AtomicRequest, which is also the |
| // privilege necessary to write to the atomic attributes, so no need to check |
| |
| switch (requestType) |
| { |
| case Globals::AtomicRequestTypeEnum::kBeginWrite: |
| handleAtomicBegin(commandObj, commandPath, commandData); |
| return true; |
| case Globals::AtomicRequestTypeEnum::kCommitWrite: |
| handleAtomicCommit(commandObj, commandPath, commandData); |
| return true; |
| case Globals::AtomicRequestTypeEnum::kRollbackWrite: |
| handleAtomicRollback(commandObj, commandPath, commandData); |
| return true; |
| case Globals::AtomicRequestTypeEnum::kUnknownEnumValue: |
| commandObj->AddStatus(commandPath, imcode::InvalidCommand); |
| return true; |
| } |
| |
| return false; |
| } |
| |
| bool emberAfThermostatClusterSetpointRaiseLowerCallback(app::CommandHandler * commandObj, |
| const app::ConcreteCommandPath & commandPath, |
| const Commands::SetpointRaiseLower::DecodableType & commandData) |
| { |
| auto & mode = commandData.mode; |
| auto & amount = commandData.amount; |
| |
| EndpointId aEndpointId = commandPath.mEndpointId; |
| |
| int16_t HeatingSetpoint = kDefaultHeatingSetpoint, CoolingSetpoint = kDefaultCoolingSetpoint; // Set to defaults to be safe |
| imcode status = imcode::Failure; |
| imcode WriteCoolingSetpointStatus = imcode::Failure; |
| imcode WriteHeatingSetpointStatus = imcode::Failure; |
| int16_t DeadBandTemp = 0; |
| int8_t DeadBand = 0; |
| uint32_t OurFeatureMap; |
| bool AutoSupported = false; |
| bool HeatSupported = false; |
| bool CoolSupported = false; |
| |
| if (FeatureMap::Get(aEndpointId, &OurFeatureMap) != imcode::Success) |
| OurFeatureMap = FEATURE_MAP_DEFAULT; |
| |
| if (OurFeatureMap & 1 << 5) // Bit 5 is Auto Mode supported |
| AutoSupported = true; |
| |
| if (OurFeatureMap & 1 << 0) |
| HeatSupported = true; |
| |
| if (OurFeatureMap & 1 << 1) |
| CoolSupported = true; |
| |
| if (AutoSupported) |
| { |
| if (MinSetpointDeadBand::Get(aEndpointId, &DeadBand) != imcode::Success) |
| DeadBand = kDefaultDeadBand; |
| DeadBandTemp = static_cast<int16_t>(DeadBand * 10); |
| } |
| |
| switch (mode) |
| { |
| case SetpointRaiseLowerModeEnum::kBoth: |
| if (HeatSupported && CoolSupported) |
| { |
| int16_t DesiredCoolingSetpoint, CoolLimit, DesiredHeatingSetpoint, HeatLimit; |
| if (OccupiedCoolingSetpoint::Get(aEndpointId, &CoolingSetpoint) == imcode::Success) |
| { |
| DesiredCoolingSetpoint = static_cast<int16_t>(CoolingSetpoint + amount * 10); |
| CoolLimit = static_cast<int16_t>(DesiredCoolingSetpoint - |
| EnforceCoolingSetpointLimits(DesiredCoolingSetpoint, aEndpointId)); |
| { |
| if (OccupiedHeatingSetpoint::Get(aEndpointId, &HeatingSetpoint) == imcode::Success) |
| { |
| DesiredHeatingSetpoint = static_cast<int16_t>(HeatingSetpoint + amount * 10); |
| HeatLimit = static_cast<int16_t>(DesiredHeatingSetpoint - |
| EnforceHeatingSetpointLimits(DesiredHeatingSetpoint, aEndpointId)); |
| { |
| if (CoolLimit != 0 || HeatLimit != 0) |
| { |
| if (abs(CoolLimit) <= abs(HeatLimit)) |
| { |
| // We are limited by the Heating Limit |
| DesiredHeatingSetpoint = static_cast<int16_t>(DesiredHeatingSetpoint - HeatLimit); |
| DesiredCoolingSetpoint = static_cast<int16_t>(DesiredCoolingSetpoint - HeatLimit); |
| } |
| else |
| { |
| // We are limited by Cooling Limit |
| DesiredHeatingSetpoint = static_cast<int16_t>(DesiredHeatingSetpoint - CoolLimit); |
| DesiredCoolingSetpoint = static_cast<int16_t>(DesiredCoolingSetpoint - CoolLimit); |
| } |
| } |
| WriteCoolingSetpointStatus = OccupiedCoolingSetpoint::Set(aEndpointId, DesiredCoolingSetpoint); |
| if (WriteCoolingSetpointStatus != imcode::Success) |
| { |
| ChipLogError(Zcl, "Error: SetOccupiedCoolingSetpoint failed!"); |
| } |
| WriteHeatingSetpointStatus = OccupiedHeatingSetpoint::Set(aEndpointId, DesiredHeatingSetpoint); |
| if (WriteHeatingSetpointStatus != imcode::Success) |
| { |
| ChipLogError(Zcl, "Error: SetOccupiedHeatingSetpoint failed!"); |
| } |
| } |
| } |
| } |
| } |
| } |
| |
| if (CoolSupported && !HeatSupported) |
| { |
| if (OccupiedCoolingSetpoint::Get(aEndpointId, &CoolingSetpoint) == imcode::Success) |
| { |
| CoolingSetpoint = static_cast<int16_t>(CoolingSetpoint + amount * 10); |
| CoolingSetpoint = EnforceCoolingSetpointLimits(CoolingSetpoint, aEndpointId); |
| WriteCoolingSetpointStatus = OccupiedCoolingSetpoint::Set(aEndpointId, CoolingSetpoint); |
| if (WriteCoolingSetpointStatus != imcode::Success) |
| { |
| ChipLogError(Zcl, "Error: SetOccupiedCoolingSetpoint failed!"); |
| } |
| } |
| } |
| |
| if (HeatSupported && !CoolSupported) |
| { |
| if (OccupiedHeatingSetpoint::Get(aEndpointId, &HeatingSetpoint) == imcode::Success) |
| { |
| HeatingSetpoint = static_cast<int16_t>(HeatingSetpoint + amount * 10); |
| HeatingSetpoint = EnforceHeatingSetpointLimits(HeatingSetpoint, aEndpointId); |
| WriteHeatingSetpointStatus = OccupiedHeatingSetpoint::Set(aEndpointId, HeatingSetpoint); |
| if (WriteHeatingSetpointStatus != imcode::Success) |
| { |
| ChipLogError(Zcl, "Error: SetOccupiedHeatingSetpoint failed!"); |
| } |
| } |
| } |
| |
| if ((!HeatSupported || WriteHeatingSetpointStatus == imcode::Success) && |
| (!CoolSupported || WriteCoolingSetpointStatus == imcode::Success)) |
| status = imcode::Success; |
| break; |
| |
| case SetpointRaiseLowerModeEnum::kCool: |
| if (CoolSupported) |
| { |
| if (OccupiedCoolingSetpoint::Get(aEndpointId, &CoolingSetpoint) == imcode::Success) |
| { |
| CoolingSetpoint = static_cast<int16_t>(CoolingSetpoint + amount * 10); |
| CoolingSetpoint = EnforceCoolingSetpointLimits(CoolingSetpoint, aEndpointId); |
| if (AutoSupported) |
| { |
| // Need to check if we can move the cooling setpoint while maintaining the dead band |
| if (OccupiedHeatingSetpoint::Get(aEndpointId, &HeatingSetpoint) == imcode::Success) |
| { |
| if (CoolingSetpoint - HeatingSetpoint < DeadBandTemp) |
| { |
| // Dead Band Violation |
| // Try to adjust it |
| HeatingSetpoint = static_cast<int16_t>(CoolingSetpoint - DeadBandTemp); |
| if (HeatingSetpoint == EnforceHeatingSetpointLimits(HeatingSetpoint, aEndpointId)) |
| { |
| // Desired cooling setpoint is enforcable |
| // Set the new cooling and heating setpoints |
| if (OccupiedHeatingSetpoint::Set(aEndpointId, HeatingSetpoint) == imcode::Success) |
| { |
| if (OccupiedCoolingSetpoint::Set(aEndpointId, CoolingSetpoint) == imcode::Success) |
| status = imcode::Success; |
| } |
| else |
| ChipLogError(Zcl, "Error: SetOccupiedHeatingSetpoint failed!"); |
| } |
| else |
| { |
| ChipLogError(Zcl, "Error: Could Not adjust heating setpoint to maintain dead band!"); |
| status = imcode::InvalidCommand; |
| } |
| } |
| else |
| status = OccupiedCoolingSetpoint::Set(aEndpointId, CoolingSetpoint); |
| } |
| else |
| ChipLogError(Zcl, "Error: GetOccupiedHeatingSetpoint failed!"); |
| } |
| else |
| { |
| status = OccupiedCoolingSetpoint::Set(aEndpointId, CoolingSetpoint); |
| } |
| } |
| else |
| ChipLogError(Zcl, "Error: GetOccupiedCoolingSetpoint failed!"); |
| } |
| else |
| status = imcode::InvalidCommand; |
| break; |
| |
| case SetpointRaiseLowerModeEnum::kHeat: |
| if (HeatSupported) |
| { |
| if (OccupiedHeatingSetpoint::Get(aEndpointId, &HeatingSetpoint) == imcode::Success) |
| { |
| HeatingSetpoint = static_cast<int16_t>(HeatingSetpoint + amount * 10); |
| HeatingSetpoint = EnforceHeatingSetpointLimits(HeatingSetpoint, aEndpointId); |
| if (AutoSupported) |
| { |
| // Need to check if we can move the cooling setpoint while maintaining the dead band |
| if (OccupiedCoolingSetpoint::Get(aEndpointId, &CoolingSetpoint) == imcode::Success) |
| { |
| if (CoolingSetpoint - HeatingSetpoint < DeadBandTemp) |
| { |
| // Dead Band Violation |
| // Try to adjust it |
| CoolingSetpoint = static_cast<int16_t>(HeatingSetpoint + DeadBandTemp); |
| if (CoolingSetpoint == EnforceCoolingSetpointLimits(CoolingSetpoint, aEndpointId)) |
| { |
| // Desired cooling setpoint is enforcable |
| // Set the new cooling and heating setpoints |
| if (OccupiedCoolingSetpoint::Set(aEndpointId, CoolingSetpoint) == imcode::Success) |
| { |
| if (OccupiedHeatingSetpoint::Set(aEndpointId, HeatingSetpoint) == imcode::Success) |
| status = imcode::Success; |
| } |
| else |
| ChipLogError(Zcl, "Error: SetOccupiedCoolingSetpoint failed!"); |
| } |
| else |
| { |
| ChipLogError(Zcl, "Error: Could Not adjust cooling setpoint to maintain dead band!"); |
| status = imcode::InvalidCommand; |
| } |
| } |
| else |
| status = OccupiedHeatingSetpoint::Set(aEndpointId, HeatingSetpoint); |
| } |
| else |
| ChipLogError(Zcl, "Error: GetOccupiedCoolingSetpoint failed!"); |
| } |
| else |
| { |
| status = OccupiedHeatingSetpoint::Set(aEndpointId, HeatingSetpoint); |
| } |
| } |
| else |
| ChipLogError(Zcl, "Error: GetOccupiedHeatingSetpoint failed!"); |
| } |
| else |
| status = imcode::InvalidCommand; |
| break; |
| |
| default: |
| status = imcode::InvalidCommand; |
| break; |
| } |
| |
| commandObj->AddStatus(commandPath, status); |
| return true; |
| } |
| |
| void MatterThermostatPluginServerInitCallback() |
| { |
| Server::GetInstance().GetFabricTable().AddFabricDelegate(&gThermostatAttrAccess); |
| AttributeAccessInterfaceRegistry::Instance().Register(&gThermostatAttrAccess); |
| } |
| |
| void MatterThermostatClusterServerShutdownCallback(EndpointId endpoint) |
| { |
| ChipLogProgress(Zcl, "Shutting down thermostat server cluster on endpoint %d", endpoint); |
| Delegate * delegate = GetDelegate(endpoint); |
| |
| if (delegate != nullptr) |
| { |
| resetAtomicWrite(delegate, endpoint); |
| } |
| } |
