| # |
| # Copyright (c) 2020 Project CHIP Authors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| |
| # |
| # @file |
| # Component makefile for incorporating CHIP into a k32w061 |
| # application. |
| # |
| # This makefile is intended to work in conjunction with the k32w061-app.mk |
| # makefile to build the CHIP example applications on NXP platforms. |
| # k32w061 applications should include this file in their top level Makefile |
| # after including k32w061-app.mk. E.g.: |
| # |
| # PROJECT_ROOT = $(realpath .) |
| # |
| # BUILD_SUPPORT_DIR = $(PROJECT_ROOT)/third_party/connectedhomeip/config/k32w |
| # |
| # include $(BUILD_SUPPORT_DIR)/k32w061-app.mk |
| # include $(BUILD_SUPPORT_DIR)/k32w061-chip.mk |
| # |
| # PROJECT_ROOT := $(realpath .) |
| # |
| # APP := chip-k32w061-bringup |
| # |
| # SRCS = \ |
| # $(PROJECT_ROOT)/main.cpp \ |
| # ... |
| # |
| # $(call GenerateBuildRules) |
| # |
| # ================================================== |
| # General settings |
| # ================================================== |
| |
| # Location of CHIP source tree |
| CHIP_ROOT ?= $(PROJECT_ROOT)/third_party/connectedhomeip |
| |
| # Archtecture for which CHIP will be built. |
| CHIP_HOST_ARCH := armv7-unknown-linux-gnu |
| |
| # Directory into which the CHIP build system will place its output. |
| CHIP_OUTPUT_DIR = $(OUTPUT_DIR)/chip |
| |
| # An optional file containing application-specific configuration overrides. |
| CHIP_PROJECT_CONFIG = $(wildcard $(PROJECT_ROOT)/include/CHIPProjectConfig.h) |
| |
| # Architcture on which CHIP is being built. |
| CHIP_BUILD_ARCH = $(shell $(CHIP_ROOT)/third_party/nlbuild-autotools/repo/third_party/autoconf/config.guess | sed -e 's/[[:digit:].]*$$//g') |
| |
| # ================================================== |
| # Compilation flags specific to building CHIP |
| # ================================================== |
| |
| CHIP_DEFINES += \ |
| MBEDTLS_CONFIG_FILE=\<$(CHIP_ROOT)/third_party/openthread/repo/third_party/mbedtls/mbedtls-config.h\> \ |
| MBEDTLS_USER_CONFIG_FILE=\<$(CHIP_ROOT)/third_party/openthread/repo/examples/platforms/k32w/k32w061/k32w061-mbedtls-config.h\> \ |
| MBEDTLS_THREADING_C=1 \ |
| MBEDTLS_THREADING_ALT=1 \ |
| MBEDTLS_X509_CSR_WRITE_C \ |
| MBEDTLS_X509_CREATE_C \ |
| MBEDTLS_PK_WRITE_C \ |
| MBEDTLS_OID_C \ |
| MBEDTLS_PEM_WRITE_C \ |
| MBEDTLS_BASE64_C \ |
| MBEDTLS_SSL_COOKIE_C \ |
| MBEDTLS_HKDF_C \ |
| MBEDTLS_SSL_SRV_C \ |
| MBEDTLS_ERROR_C |
| |
| CHIP_DEFINE_FLAGS = $(foreach def,$(CHIP_DEFINES),-D$(def)) |
| CHIP_CPPFLAGS = $(STD_CFLAGS) $(CFLAGS) $(DEBUG_FLAGS) $(OPT_FLAGS) $(DEFINE_FLAGS) $(CHIP_DEFINE_FLAGS) $(INC_FLAGS) |
| CHIP_CXXFLAGS = $(STD_CXXFLAGS) $(CXXFLAGS) |
| |
| # ================================================== |
| # CHIP configuration options |
| # ================================================== |
| |
| CHIP_CONFIGURE_OPTIONS = \ |
| -C AR="$(AR)" AS="$(AS)" CC="$(CCACHE) $(CC)" CXX="$(CCACHE) $(CXX)" \ |
| LD="$(LD)" OBJCOPY="$(OBJCOPY)" RANLIB="$(RANLIB)" INSTALL="$(INSTALL) $(INSTALLFLAGS)" \ |
| CPPFLAGS="$(CHIP_CPPFLAGS) -imacros $(CHIP_ROOT)/third_party/openthread/repo/examples/platforms/k32w/k32w061/k32w061-sdk-config.h" \ |
| CXXFLAGS="$(CHIP_CXXFLAGS)" \ |
| --prefix=$(CHIP_OUTPUT_DIR) \ |
| --exec-prefix=$(CHIP_OUTPUT_DIR) \ |
| --host=$(CHIP_HOST_ARCH) \ |
| --build=$(CHIP_BUILD_ARCH) \ |
| --with-target-style=embedded \ |
| --with-device-layer=k32w \ |
| --with-network-layer=all \ |
| --with-target-network=lwip \ |
| --with-lwip=internal \ |
| --with-lwip-target=k32w \ |
| --with-inet-endpoint="tcp udp" \ |
| --with-openssl=no \ |
| --with-openthread=internal \ |
| --with-logging-style=external \ |
| --with-chip-project-includes=$(CHIP_PROJECT_CONFIG) \ |
| --with-chip-system-project-includes=$(CHIP_PROJECT_CONFIG) \ |
| --with-chip-inet-project-includes=$(CHIP_PROJECT_CONFIG) \ |
| --with-chip-ble-project-includes=$(CHIP_PROJECT_CONFIG) \ |
| --with-chip-warm-project-includes=$(CHIP_PROJECT_CONFIG) \ |
| --with-chip-device-project-includes=$(CHIP_PROJECT_CONFIG) \ |
| --disable-ipv4 \ |
| --disable-tests \ |
| --disable-tools \ |
| --disable-docs \ |
| --disable-java \ |
| --disable-device-manager \ |
| --with-crypto=mbedtls |
| |
| # Enable / disable optimization. |
| ifeq ($(OPT),1) |
| CHIP_CONFIGURE_OPTIONS += --enable-optimization=yes |
| else |
| CHIP_CONFIGURE_OPTIONS += --enable-optimization=no |
| endif |
| |
| ifeq ($(DEBUG),1) |
| CHIP_CONFIGURE_OPTIONS += --enable-debug |
| endif |
| # ================================================== |
| # Adjustments to standard build settings to |
| # incorporate CHIP |
| # ================================================== |
| |
| # Add CHIP-specific paths to the standard include directories. |
| STD_INC_DIRS += \ |
| $(CHIP_OUTPUT_DIR)/include \ |
| $(CHIP_OUTPUT_DIR)/src/include \ |
| $(CHIP_OUTPUT_DIR)/third_party/openthread/include \ |
| $(CHIP_ROOT)/third_party/lwip/repo/lwip/src/include \ |
| $(CHIP_ROOT)/third_party/openthread/repo/third_party/nxp/K32W061DK6/middleware/mbedtls/port/ksdk \ |
| $(CHIP_ROOT)/src/lwip \ |
| $(CHIP_ROOT)/src/lwip/k32w \ |
| $(CHIP_ROOT)/src/lwip/freertos \ |
| $(K32W061_SDK_ROOT)/CMSIS/Include \ |
| $(K32W061_SDK_ROOT)/devices/K32W061 \ |
| $(K32W061_SDK_ROOT)/devices/K32W061/drivers \ |
| $(K32W061_SDK_ROOT)/devices/K32W061/utilities \ |
| $(K32W061_SDK_ROOT)/devices/K32W061/utilities/debug_console \ |
| $(K32W061_SDK_ROOT)/devices/K32W061/utilities/str \ |
| $(K32W061_SDK_ROOT)/middleware/wireless/framework/Common \ |
| $(K32W061_SDK_ROOT)/middleware/wireless/framework/Lists \ |
| $(K32W061_SDK_ROOT)/middleware/wireless/framework/PDM/Include \ |
| $(K32W061_SDK_ROOT)/middleware/wireless/framework/MemManager/Interface \ |
| $(CHIP_ROOT)/third_party/openthread/repo/examples/platforms |
| |
| # Add the location of CHIP libraries to application link action. |
| STD_LDFLAGS += -L$(CHIP_OUTPUT_DIR)/lib |
| |
| # Add CHIP libraries to standard libraries list. |
| STD_LIBS += \ |
| -lDeviceLayer \ |
| -lCHIP \ |
| -lInetLayer \ |
| -lSystemLayer \ |
| -llwip \ |
| -lmbedtls |
| |
| # Add the appropriate CHIP target as a prerequisite to all application |
| # compilation targets to ensure that CHIP gets built and its header |
| # files installed prior to compiling any dependent source files. |
| STD_COMPILE_PREREQUISITES += install-chip |
| |
| # Add the CHIP libraries as prerequisites for linking the application. |
| STD_LINK_PREREQUISITES += \ |
| $(CHIP_OUTPUT_DIR)/lib/libDeviceLayer.a \ |
| $(CHIP_OUTPUT_DIR)/lib/libCHIP.a \ |
| $(CHIP_OUTPUT_DIR)/lib/libInetLayer.a \ |
| $(CHIP_OUTPUT_DIR)/lib/libSystemLayer.a \ |
| $(CHIP_OUTPUT_DIR)/lib/liblwip.a \ |
| $(CHIP_OUTPUT_DIR)/lib/libmbedtls.a |
| |
| # ================================================== |
| # Late-bound build rules for CHIP |
| # ================================================== |
| |
| # Add CHIPBuildRules to the list of late-bound build rules that |
| # will be evaluated when GenerateBuildRules is called. |
| LATE_BOUND_RULES += CHIPBuildRules |
| |
| # Rules for configuring, building and installing CHIP. |
| define CHIPBuildRules |
| |
| .PHONY : config-chip .check-config-chip build-chip install-chip clean-chip |
| |
| .check-config-chip : | $(CHIP_OUTPUT_DIR) |
| $(NO_ECHO)echo $(CHIP_ROOT)/configure $(CHIP_CONFIGURE_OPTIONS) > $(CHIP_OUTPUT_DIR)/config.args.tmp; \ |
| (test -r $(CHIP_OUTPUT_DIR)/config.args && cmp -s $(CHIP_OUTPUT_DIR)/config.args.tmp $(CHIP_OUTPUT_DIR)/config.args) || \ |
| mv $(CHIP_OUTPUT_DIR)/config.args.tmp $(CHIP_OUTPUT_DIR)/config.args; \ |
| rm -f $(CHIP_OUTPUT_DIR)/config.args.tmp; |
| |
| $(CHIP_OUTPUT_DIR)/config.args : .check-config-chip |
| @: # Null action required to work around make's crazy timestamp caching behavior. |
| |
| $(CHIP_ROOT)/configure : $(CHIP_ROOT)/configure.ac |
| @echo "$(HDR_PREFIX)BOOTSTRAP CHIP..." |
| $(NO_ECHO)(cd $(CHIP_ROOT) && ./bootstrap) |
| |
| $(CHIP_OUTPUT_DIR)/config.status : $(CHIP_ROOT)/configure $(CHIP_OUTPUT_DIR)/config.args |
| @echo "$(HDR_PREFIX)CONFIGURE CHIP..." |
| $(NO_ECHO)(cd $(CHIP_OUTPUT_DIR) && $(CHIP_ROOT)/configure $(CHIP_CONFIGURE_OPTIONS)) |
| |
| config-chip : $(CHIP_OUTPUT_DIR)/config.status | $(OPENTHREAD_PREREQUISITE) |
| |
| build-chip : config-chip |
| @echo "$(HDR_PREFIX)BUILD CHIP..." |
| $(NO_ECHO)MAKEFLAGS= make -C $(CHIP_OUTPUT_DIR) --no-print-directory all V=$(VERBOSE) |
| |
| install-chip : | build-chip |
| @echo "$(HDR_PREFIX)INSTALL CHIP..." |
| $(NO_ECHO)MAKEFLAGS= make -C $(CHIP_OUTPUT_DIR) --no-print-directory install V=$(VERBOSE) |
| |
| clean-chip: |
| @echo "$(HDR_PREFIX)RM $(CHIP_OUTPUT_DIR)" |
| $(NO_ECHO)rm -rf $(CHIP_OUTPUT_DIR) |
| |
| $(CHIP_OUTPUT_DIR) : |
| @echo "$(HDR_PREFIX)MKDIR $$@" |
| $(NO_ECHO)mkdir -p "$$@" |
| |
| endef |
| # ================================================== |
| # CHIP-specific help definitions |
| # ================================================== |
| |
| define TargetHelp += |
| |
| |
| config-chip Run the CHIP configure script. |
| |
| build-chip Build the CHIP libraries. |
| |
| install-chip Install CHIP libraries and headers in |
| build output directory for use by application. |
| |
| clean-chip Clean all build outputs produced by the CHIP |
| build process. |
| endef |
