/ {
	chosen {
		zephyr,console = &cdc_acm_uart0;
		zephyr,shell-uart = &cdc_acm_uart0;
	};

	key_pool {
		compatible = "gpio-keys";

		inp {
			gpios = <&gpiob 2 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>,
					<&gpiob 3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
		};
	};

	led_pool {
		compatible = "gpio-leds";

		out {
			gpios = <&gpiob 1 GPIO_ACTIVE_HIGH>,
					<&gpioe 3 GPIO_ACTIVE_HIGH>;
		};
	};

	pwm_pool {
		compatible = "pwm-leds";
		out {
			pwms = <&pwm0 1 PWM_MSEC(20) PWM_POLARITY_NORMAL>,
					<&pwm0 0 PWM_MSEC(20) PWM_POLARITY_NORMAL>,
					<&pwm0 5 PWM_MSEC(20) PWM_POLARITY_NORMAL>,
					<&pwm0 2 PWM_MSEC(20) PWM_POLARITY_NORMAL>;
		};
	};
};

&pwm0 {
	pinctrl-ch1 = <&pwm_ch1_pb5_default>;
	/* On board RGB LEDs */
	pinctrl-ch0 = <&pwm_ch0_pb4_default>;
	pinctrl-ch5 = <&pwm_ch5_pb0_default>;
	pinctrl-ch2 = <&pwm_ch2_pb7_default>;
};

&pinctrl {
	pwm_ch1_pb5_default: pwm_ch1_pb5_default {
		pinmux = <B9x_PINMUX_SET(B9x_PORT_B, B9x_PIN_5, B91_FUNC_C)>;
	};
	pwm_ch0_pb4_default: pwm_ch0_pb4_default {
		pinmux = <B9x_PINMUX_SET(B9x_PORT_B, B9x_PIN_4, B91_FUNC_B)>;
	};
	pwm_ch5_pb0_default: pwm_ch5_pb0_default {
		pinmux = <B9x_PINMUX_SET(B9x_PORT_B, B9x_PIN_0, B91_FUNC_C)>;
	};
	pwm_ch2_pb7_default: pwm_ch2_pb7_default {
		pinmux = <B9x_PINMUX_SET(B9x_PORT_B, B9x_PIN_7, B91_FUNC_A)>;
	};
};

&zephyr_udc0 {
	cdc_acm_uart0: cdc_acm_uart0 {
		compatible = "zephyr,cdc-acm-uart";
	};
};

&uart0 {
	pinctrl-0 = <&uart0_tx_pa3_default &uart0_rx_pa4_default>;
};

&gpiob {
	interrupts = <37 1>;
};

&gpioc {
	interrupts = <38 1>;
};

&gpioe {
	status = "okay";
};