# Copyright (c) 2021 Project CHIP Authors
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

name:
    24.1.10. [TC-CADMIN-1.10] Device exit commissioning mode after 20 failed
    commission attempts [BCM] [DUT - Commissionee]

PICS:
    - CADMIN.S

config:
    nodeId: 0x12344321
    timeout: 700
    nodeIdForDuplicateCommissioning:
        type: node_id
        defaultValue: 0x11
    nodeId2:
        type: node_id
        defaultValue: 0xCAFE
    nodeId3:
        type: node_id
        defaultValue: 0xC00FEE
    endpoint: 0
    discriminator:
        type: int16u
        defaultValue: 3840
    correctPayload:
        type: char_string
        defaultValue: "MT:-24J0AFN00KA0648G00"
    incorrectSetupCodePayload:
        type: char_string
        defaultValue: "MT:-24J0AFN00I.0648G00"

tests:
    - label: "TH_CR1 starts a commissioning process with DUT_CE"
      cluster: "DelayCommands"
      command: "WaitForCommissionee"
      PICS: CADMIN.S
      arguments:
          values:
              - name: "nodeId"
                value: nodeId

    - label:
          "Open commissioning window exactly like we plan to later to verify
          that `correctPayload` can in fact commision the device."
      cluster: "AdministratorCommissioning"
      command: "OpenBasicCommissioningWindow"
      PICS: CADMIN.S.C01.Rsp
      timedInteractionTimeoutMs: 10000
      arguments:
          values:
              - name: "CommissioningTimeout"
                value: 900

    - label:
          "Temporarily commission device with `correctPayload` just like we will
          try to later"
      identity: "beta"
      cluster: "CommissionerCommands"
      command: "PairWithCode"
      # Only run this if we ran the previous step.
      PICS: CADMIN.S && CADMIN.S.C01.Rsp
      arguments:
          values:
              - name: "nodeId"
                value: nodeId2
              - name: "payload"
                value: correctPayload

    - label: "Wait for a CASE session"
      identity: "beta"
      cluster: "DelayCommands"
      command: "WaitForCommissionee"
      PICS: CADMIN.S
      arguments:
          values:
              - name: "nodeId"
                value: nodeId2

    - label: "Read FabricIndex of beta so we can delete the temp fabric"
      identity: "beta"
      cluster: "Operational Credentials"
      command: "readAttribute"
      attribute: "CurrentFabricIndex"
      # Only run this if we commissioned the device.
      PICS: CADMIN.S.C01.Rsp
      response:
          saveAs: tempFabricIndex

    - label: "Remove the temp fabric"
      cluster: "Operational Credentials"
      command: "RemoveFabric"
      # Only run this if we commissioned the device.
      PICS: CADMIN.S.C01.Rsp
      arguments:
          values:
              - name: "FabricIndex"
                value: tempFabricIndex

    - label: "TH_CR1 opens a commissioning window on DUT_CE"
      cluster: "AdministratorCommissioning"
      command: "OpenBasicCommissioningWindow"
      PICS: CADMIN.S.C01.Rsp
      timedInteractionTimeoutMs: 10000
      arguments:
          values:
              - name: "CommissioningTimeout"
                value: 900

    - label:
          "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup
          code"
      identity: "beta"
      cluster: "CommissionerCommands"
      command: "PairWithCode"
      PICS: CADMIN.S
      arguments:
          values:
              - name: "nodeId"
                value: nodeId2
              - name: "payload"
                value: incorrectSetupCodePayload
      response:
          error: FAILURE

    - label:
          "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup
          code"
      identity: "beta"
      cluster: "CommissionerCommands"
      command: "PairWithCode"
      PICS: CADMIN.S
      arguments:
          values:
              - name: "nodeId"
                value: nodeId2
              - name: "payload"
                value: incorrectSetupCodePayload
      response:
          error: FAILURE

    - label:
          "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup
          code"
      identity: "beta"
      cluster: "CommissionerCommands"
      command: "PairWithCode"
      PICS: CADMIN.S
      arguments:
          values:
              - name: "nodeId"
                value: nodeId2
              - name: "payload"
                value: incorrectSetupCodePayload
      response:
          error: FAILURE

    - label:
          "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup
          code"
      identity: "beta"
      cluster: "CommissionerCommands"
      command: "PairWithCode"
      PICS: CADMIN.S
      arguments:
          values:
              - name: "nodeId"
                value: nodeId2
              - name: "payload"
                value: incorrectSetupCodePayload
      response:
          error: FAILURE

    - label:
          "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup
          code"
      identity: "beta"
      cluster: "CommissionerCommands"
      command: "PairWithCode"
      PICS: CADMIN.S
      arguments:
          values:
              - name: "nodeId"
                value: nodeId2
              - name: "payload"
                value: incorrectSetupCodePayload
      response:
          error: FAILURE

    - label:
          "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup
          code"
      identity: "beta"
      cluster: "CommissionerCommands"
      command: "PairWithCode"
      PICS: CADMIN.S
      arguments:
          values:
              - name: "nodeId"
                value: nodeId2
              - name: "payload"
                value: incorrectSetupCodePayload
      response:
          error: FAILURE

    - label:
          "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup
          code"
      identity: "beta"
      cluster: "CommissionerCommands"
      command: "PairWithCode"
      PICS: CADMIN.S
      arguments:
          values:
              - name: "nodeId"
                value: nodeId2
              - name: "payload"
                value: incorrectSetupCodePayload
      response:
          error: FAILURE

    - label:
          "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup
          code"
      identity: "beta"
      cluster: "CommissionerCommands"
      command: "PairWithCode"
      PICS: CADMIN.S
      arguments:
          values:
              - name: "nodeId"
                value: nodeId2
              - name: "payload"
                value: incorrectSetupCodePayload
      response:
          error: FAILURE

    - label:
          "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup
          code"
      identity: "beta"
      cluster: "CommissionerCommands"
      command: "PairWithCode"
      PICS: CADMIN.S
      arguments:
          values:
              - name: "nodeId"
                value: nodeId2
              - name: "payload"
                value: incorrectSetupCodePayload
      response:
          error: FAILURE

    - label:
          "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup
          code"
      identity: "beta"
      cluster: "CommissionerCommands"
      command: "PairWithCode"
      arguments:
          values:
              - name: "nodeId"
                value: nodeId2
              - name: "payload"
                value: incorrectSetupCodePayload
      response:
          error: FAILURE

    - label:
          "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup
          code"
      identity: "beta"
      cluster: "CommissionerCommands"
      command: "PairWithCode"
      PICS: CADMIN.S
      arguments:
          values:
              - name: "nodeId"
                value: nodeId2
              - name: "payload"
                value: incorrectSetupCodePayload
      response:
          error: FAILURE

    - label:
          "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup
          code"
      identity: "beta"
      cluster: "CommissionerCommands"
      command: "PairWithCode"
      PICS: CADMIN.S
      arguments:
          values:
              - name: "nodeId"
                value: nodeId2
              - name: "payload"
                value: incorrectSetupCodePayload
      response:
          error: FAILURE

    - label:
          "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup
          code"
      identity: "beta"
      cluster: "CommissionerCommands"
      command: "PairWithCode"
      PICS: CADMIN.S
      arguments:
          values:
              - name: "nodeId"
                value: nodeId2
              - name: "payload"
                value: incorrectSetupCodePayload
      response:
          error: FAILURE

    - label:
          "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup
          code"
      identity: "beta"
      cluster: "CommissionerCommands"
      command: "PairWithCode"
      PICS: CADMIN.S
      arguments:
          values:
              - name: "nodeId"
                value: nodeId2
              - name: "payload"
                value: incorrectSetupCodePayload
      response:
          error: FAILURE

    - label:
          "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup
          code"
      identity: "beta"
      cluster: "CommissionerCommands"
      command: "PairWithCode"
      PICS: CADMIN.S
      arguments:
          values:
              - name: "nodeId"
                value: nodeId2
              - name: "payload"
                value: incorrectSetupCodePayload
      response:
          error: FAILURE

    - label:
          "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup
          code"
      identity: "beta"
      cluster: "CommissionerCommands"
      command: "PairWithCode"
      PICS: CADMIN.S
      arguments:
          values:
              - name: "nodeId"
                value: nodeId2
              - name: "payload"
                value: incorrectSetupCodePayload
      response:
          error: FAILURE

    - label:
          "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup
          code"
      identity: "beta"
      cluster: "CommissionerCommands"
      command: "PairWithCode"
      PICS: CADMIN.S
      arguments:
          values:
              - name: "nodeId"
                value: nodeId2
              - name: "payload"
                value: incorrectSetupCodePayload
      response:
          error: FAILURE

    - label:
          "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup
          code"
      identity: "beta"
      cluster: "CommissionerCommands"
      command: "PairWithCode"
      PICS: CADMIN.S
      arguments:
          values:
              - name: "nodeId"
                value: nodeId2
              - name: "payload"
                value: incorrectSetupCodePayload
      response:
          error: FAILURE

    - label:
          "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup
          code"
      identity: "beta"
      cluster: "CommissionerCommands"
      command: "PairWithCode"
      PICS: CADMIN.S
      arguments:
          values:
              - name: "nodeId"
                value: nodeId2
              - name: "payload"
                value: incorrectSetupCodePayload
      response:
          error: FAILURE

    - label:
          "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup
          code"
      identity: "beta"
      cluster: "CommissionerCommands"
      command: "PairWithCode"
      PICS: CADMIN.S
      arguments:
          values:
              - name: "nodeId"
                value: nodeId2
              - name: "payload"
                value: incorrectSetupCodePayload
      response:
          error: FAILURE

    # This step must match the verification step above where we checked `correctPayload`
    - label:
          "TH_CR2 attempts to do PASE to DUT_CE using the correct onboarding
          payload"
      identity: "beta"
      cluster: "CommissionerCommands"
      command: "PairWithCode"
      PICS: CADMIN.S
      arguments:
          values:
              - name: "nodeId"
                value: nodeId2
              - name: "payload"
                value: correctPayload
      response:
          error: FAILURE