| # Copyright (c) 2022-2024 Project CHIP Authors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| name: Build example - Telink |
| |
| on: |
| push: |
| branches-ignore: |
| - 'dependabot/**' |
| pull_request: |
| merge_group: |
| |
| concurrency: |
| group: ${{ github.ref }}-${{ github.workflow }}-${{ (github.event_name == 'pull_request' && github.event.number) || (github.event_name == 'workflow_dispatch' && github.run_number) || github.sha }} |
| cancel-in-progress: true |
| |
| env: |
| CHIP_NO_LOG_TIMESTAMPS: true |
| |
| jobs: |
| telink: |
| name: Telink |
| env: |
| BUILD_TYPE: telink |
| |
| runs-on: ubuntu-latest |
| if: github.actor != 'restyled-io[bot]' |
| |
| container: |
| image: ghcr.io/project-chip/chip-build-telink:50 |
| volumes: |
| - "/tmp/bloat_reports:/tmp/bloat_reports" |
| |
| steps: |
| - name: Checkout |
| uses: actions/checkout@v4 |
| - name: Checkout submodules & Bootstrap |
| uses: ./.github/actions/checkout-submodules-and-bootstrap |
| with: |
| platform: telink |
| |
| - name: Set up environment for size reports |
| uses: ./.github/actions/setup-size-reports |
| if: ${{ !env.ACT }} |
| with: |
| gh-context: ${{ toJson(github) }} |
| |
| # - name: Update Zephyr to specific revision (for developers purpose) |
| # run: scripts/run_in_build_env.sh "python3 scripts/tools/telink/update_zephyr.py 68deadeb5c20b82d68700e720d4580e8003bf1d8" |
| |
| - name: Build example Telink (B92 retention) Air Quality Sensor App |
| run: | |
| ./scripts/run_in_build_env.sh \ |
| "./scripts/build/build_examples.py --target 'telink-tlsr9528a_retention-air-quality-sensor' build" |
| .environment/pigweed-venv/bin/python3 scripts/tools/memory/gh_sizes.py \ |
| telink tlsr9528a_retention air-quality-sensor-app \ |
| out/telink-tlsr9528a_retention-air-quality-sensor/zephyr/zephyr.elf \ |
| /tmp/bloat_reports/ |
| |
| - name: clean out build output |
| run: rm -rf ./out |
| |
| - name: Build example Telink (W91) All Clusters App |
| run: | |
| ./scripts/run_in_build_env.sh \ |
| "./scripts/build/build_examples.py --target 'telink-tlsr9118bdk40d-all-clusters' build" |
| .environment/pigweed-venv/bin/python3 scripts/tools/memory/gh_sizes.py \ |
| telink tlsr9118bdk40d all-clusters-app \ |
| out/telink-tlsr9118bdk40d-all-clusters/zephyr/zephyr.elf \ |
| /tmp/bloat_reports/ |
| |
| - name: clean out build output |
| run: rm -rf ./out |
| |
| - name: Build example Telink (B92) All Clusters Minimal App |
| run: | |
| ./scripts/run_in_build_env.sh \ |
| "./scripts/build/build_examples.py --target 'telink-tlsr9528a-all-clusters-minimal' build" |
| .environment/pigweed-venv/bin/python3 scripts/tools/memory/gh_sizes.py \ |
| telink tlsr9528a all-clusters-minimal-app \ |
| out/telink-tlsr9528a-all-clusters-minimal/zephyr/zephyr.elf \ |
| /tmp/bloat_reports/ |
| |
| - name: clean out build output |
| run: rm -rf ./out |
| |
| - name: Build example Telink (B91) Bridge App |
| run: | |
| ./scripts/run_in_build_env.sh \ |
| "./scripts/build/build_examples.py --target 'telink-tlsr9518adk80d-bridge' build" |
| .environment/pigweed-venv/bin/python3 scripts/tools/memory/gh_sizes.py \ |
| telink tlsr9518adk80d bridge-app \ |
| out/telink-tlsr9518adk80d-bridge/zephyr/zephyr.elf \ |
| /tmp/bloat_reports/ |
| |
| - name: clean out build output |
| run: rm -rf ./out |
| |
| - name: Build example Telink (B92 retention) Contact Sensor App |
| run: | |
| ./scripts/run_in_build_env.sh \ |
| "./scripts/build/build_examples.py --target 'telink-tlsr9528a_retention-contact-sensor' build" |
| .environment/pigweed-venv/bin/python3 scripts/tools/memory/gh_sizes.py \ |
| telink tlsr9528a_retention contact-sensor-app \ |
| out/telink-tlsr9528a_retention-contact-sensor/zephyr/zephyr.elf \ |
| /tmp/bloat_reports/ |
| |
| - name: clean out build output |
| run: rm -rf ./out |
| |
| - name: Build tools required for Factory Data |
| run: | |
| ./scripts/checkout_submodules.py --allow-changing-global-git-config --shallow --platform linux |
| ./scripts/build/gn_gen.sh |
| ./scripts/run_in_build_env.sh "ninja -C ./out/$BUILD_TYPE chip-cert chip-tool spake2p" |
| mv ./out/$BUILD_TYPE/chip-cert ./out/$BUILD_TYPE/chip-tool ./out/$BUILD_TYPE/spake2p ./out |
| |
| - name: clean out build output (keep tools) |
| run: rm -rf ./out/telink* |
| |
| - name: Build example Telink (W91) Lighting App with OTA, Factory Data |
| run: | |
| ./scripts/run_in_build_env.sh \ |
| "./scripts/build/build_examples.py --target 'telink-tlsr9118bdk40d-light-ota-factory-data' build" |
| .environment/pigweed-venv/bin/python3 scripts/tools/memory/gh_sizes.py \ |
| telink tlsr9118bdk40d lighting-app-ota-factory-data \ |
| out/telink-tlsr9118bdk40d-light-ota-factory-data/zephyr/zephyr.elf \ |
| /tmp/bloat_reports/ |
| |
| - name: clean out build output (keep tools) |
| run: rm -rf ./out/telink* |
| |
| - name: Build example Telink (B91) Lighting App with OTA, RPC, Factory Data and 4Mb flash |
| run: | |
| ./scripts/run_in_build_env.sh \ |
| "./scripts/build/build_examples.py --target 'telink-tlsr9518adk80d-light-ota-rpc-factory-data-4mb' build" |
| .environment/pigweed-venv/bin/python3 scripts/tools/memory/gh_sizes.py \ |
| telink tlsr9518adk80d lighting-app-ota-rpc-factory-data-4mb \ |
| out/telink-tlsr9518adk80d-light-ota-rpc-factory-data-4mb/zephyr/zephyr.elf \ |
| /tmp/bloat_reports/ |
| |
| - name: clean out build output (keep tools) |
| run: rm -rf ./out/telink* |
| |
| - name: Build example Telink (B92) Light Switch App with OTA, Shell, Factory Data |
| run: | |
| ./scripts/run_in_build_env.sh \ |
| "./scripts/build/build_examples.py --target 'telink-tlsr9528a-light-switch-ota-shell-factory-data' build" |
| .environment/pigweed-venv/bin/python3 scripts/tools/memory/gh_sizes.py \ |
| telink tlsr9528a light-switch-app-ota-shell-factory-data \ |
| out/telink-tlsr9528a-light-switch-ota-shell-factory-data/zephyr/zephyr.elf \ |
| /tmp/bloat_reports/ |
| |
| - name: clean out build output |
| run: rm -rf ./out |
| |
| - name: Build example Telink (B92) Lock App with DFU |
| run: | |
| ./scripts/run_in_build_env.sh \ |
| "./scripts/build/build_examples.py --target 'telink-tlsr9528a-lock-dfu' build" |
| .environment/pigweed-venv/bin/python3 scripts/tools/memory/gh_sizes.py \ |
| telink tlsr9528a lock-app-dfu \ |
| out/telink-tlsr9528a-lock-dfu/zephyr/zephyr.elf \ |
| /tmp/bloat_reports/ |
| |
| - name: clean out build output |
| run: rm -rf ./out |
| |
| - name: Build example Telink (B91) OTA Requestor App |
| run: | |
| ./scripts/run_in_build_env.sh \ |
| "./scripts/build/build_examples.py --target 'telink-tlsr9518adk80d-ota-requestor' build" |
| .environment/pigweed-venv/bin/python3 scripts/tools/memory/gh_sizes.py \ |
| telink tlsr9518adk80d ota-requestor-app \ |
| out/telink-tlsr9518adk80d-ota-requestor/zephyr/zephyr.elf \ |
| /tmp/bloat_reports/ |
| |
| - name: clean out build output |
| run: rm -rf ./out |
| |
| - name: Build example Telink (B95) Pump App |
| run: | |
| ./scripts/run_in_build_env.sh \ |
| "./scripts/build/build_examples.py --target 'telink-tlsr9258a-pump' build" |
| .environment/pigweed-venv/bin/python3 scripts/tools/memory/gh_sizes.py \ |
| telink tlsr9258a pump-app \ |
| out/telink-tlsr9258a-pump/zephyr/zephyr.elf \ |
| /tmp/bloat_reports/ |
| |
| - name: clean out build output |
| run: rm -rf ./out |
| |
| - name: Build example Telink (W91) Pump Controller App |
| run: | |
| ./scripts/run_in_build_env.sh \ |
| "./scripts/build/build_examples.py --target 'telink-tlsr9118bdk40d-pump-controller' build" |
| .environment/pigweed-venv/bin/python3 scripts/tools/memory/gh_sizes.py \ |
| telink tlsr9118bdk40d pump-controller-app \ |
| out/telink-tlsr9118bdk40d-pump-controller/zephyr/zephyr.elf \ |
| /tmp/bloat_reports/ |
| |
| - name: clean out build output |
| run: rm -rf ./out |
| |
| - name: Build example Telink (B91) Shell App |
| run: | |
| ./scripts/run_in_build_env.sh \ |
| "./scripts/build/build_examples.py --target 'telink-tlsr9518adk80d-shell' build" |
| .environment/pigweed-venv/bin/python3 scripts/tools/memory/gh_sizes.py \ |
| telink tlsr9518adk80d shell \ |
| out/telink-tlsr9518adk80d-shell/zephyr/zephyr.elf \ |
| /tmp/bloat_reports/ |
| |
| - name: clean out build output |
| run: rm -rf ./out |
| |
| - name: Build example Telink (B92 retention) Smoke CO Alarm App |
| run: | |
| ./scripts/run_in_build_env.sh \ |
| "./scripts/build/build_examples.py --target 'telink-tlsr9528a_retention-smoke-co-alarm' build" |
| .environment/pigweed-venv/bin/python3 scripts/tools/memory/gh_sizes.py \ |
| telink tlsr9528a_retention smoke_co_alarm-app \ |
| out/telink-tlsr9528a_retention-smoke-co-alarm/zephyr/zephyr.elf \ |
| /tmp/bloat_reports/ |
| |
| - name: clean out build output |
| run: rm -rf ./out |
| |
| - name: Build example Telink (B91 Mars) Temperature Measurement App with OTA |
| run: | |
| ./scripts/run_in_build_env.sh \ |
| "./scripts/build/build_examples.py --target 'telink-tlsr9518adk80d-temperature-measurement-mars-ota' build" |
| .environment/pigweed-venv/bin/python3 scripts/tools/memory/gh_sizes.py \ |
| telink tlsr9518adk80d temperature-measurement-app-mars-ota \ |
| out/telink-tlsr9518adk80d-temperature-measurement-mars-ota/zephyr/zephyr.elf \ |
| /tmp/bloat_reports/ |
| |
| - name: clean out build output |
| run: rm -rf ./out |
| |
| - name: Build example Telink (B91) Thermostat App |
| run: | |
| ./scripts/run_in_build_env.sh \ |
| "./scripts/build/build_examples.py --target 'telink-tlsr9518adk80d-thermostat' build" |
| .environment/pigweed-venv/bin/python3 scripts/tools/memory/gh_sizes.py \ |
| telink tlsr9518adk80d thermostat \ |
| out/telink-tlsr9518adk80d-thermostat/zephyr/zephyr.elf \ |
| /tmp/bloat_reports/ |
| |
| - name: clean out build output |
| run: rm -rf ./out |
| |
| - name: Build example Telink (B95) Window Covering App |
| run: | |
| ./scripts/run_in_build_env.sh \ |
| "./scripts/build/build_examples.py --target 'telink-tlsr9258a-window-covering' build" |
| .environment/pigweed-venv/bin/python3 scripts/tools/memory/gh_sizes.py \ |
| telink tlsr9258a window-covering \ |
| out/telink-tlsr9258a-window-covering/zephyr/zephyr.elf \ |
| /tmp/bloat_reports/ |
| |
| - name: clean out build output |
| run: rm -rf ./out |
| |
| - name: Uploading Size Reports |
| uses: ./.github/actions/upload-size-reports |
| if: ${{ !env.ACT }} |
| with: |
| platform-name: Telink |
