| /* |
| * |
| * Copyright (c) 2023-2024 Project CHIP Authors |
| * All rights reserved. |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include <EnergyEvseDelegateImpl.h> |
| #include <EnergyTimeUtils.h> |
| #include <app-common/zap-generated/attributes/Accessors.h> |
| #include <app-common/zap-generated/cluster-objects.h> |
| #include <app/EventLogging.h> |
| #include <app/SafeAttributePersistenceProvider.h> |
| |
| using namespace chip; |
| using namespace chip::app; |
| using namespace chip::app::DataModel; |
| using namespace chip::app::Clusters; |
| using namespace chip::app::Clusters::EnergyEvse; |
| using namespace chip::app::Clusters::EnergyEvse::Attributes; |
| |
| using chip::app::LogEvent; |
| using chip::Protocols::InteractionModel::Status; |
| |
| EnergyEvseDelegate::~EnergyEvseDelegate() |
| { |
| // TODO Fix this as part of issue #30993 refactoring |
| if (!mVehicleID.IsNull()) |
| { |
| ChipLogDetail(AppServer, "Freeing VehicleID"); |
| delete[] mVehicleID.Value().data(); |
| } |
| } |
| |
| /** |
| * @brief Called when EVSE cluster receives Disable command |
| */ |
| Status EnergyEvseDelegate::Disable() |
| { |
| ChipLogProgress(AppServer, "EnergyEvseDelegate::Disable()"); |
| |
| DataModel::Nullable<uint32_t> disableTime(0); |
| /* update ChargingEnabledUntil & DischargingEnabledUntil to show 0 */ |
| SetChargingEnabledUntil(disableTime); |
| SetDischargingEnabledUntil(disableTime); |
| |
| /* update MinimumChargeCurrent & MaximumChargeCurrent to 0 */ |
| SetMinimumChargeCurrent(0); |
| |
| mMaximumChargingCurrentLimitFromCommand = 0; |
| ComputeMaxChargeCurrentLimit(); |
| |
| /* update MaximumDischargeCurrent to 0 */ |
| SetMaximumDischargeCurrent(0); |
| |
| return HandleStateMachineEvent(EVSEStateMachineEvent::DisabledEvent); |
| } |
| |
| /** |
| * @brief Called when EVSE cluster receives EnableCharging command |
| * |
| * @param chargingEnabledUntil (can be null to indefinite charging) |
| * @param minimumChargeCurrent (in mA) |
| * @param maximumChargeCurrent (in mA) |
| */ |
| Status EnergyEvseDelegate::EnableCharging(const DataModel::Nullable<uint32_t> & chargingEnabledUntil, |
| const int64_t & minimumChargeCurrent, const int64_t & maximumChargeCurrent) |
| { |
| ChipLogProgress(AppServer, "EnergyEvseDelegate::EnableCharging()"); |
| |
| if (maximumChargeCurrent < kMinimumChargeCurrent) |
| { |
| ChipLogError(AppServer, "Maximum Current outside limits"); |
| return Status::ConstraintError; |
| } |
| |
| if (minimumChargeCurrent < kMinimumChargeCurrent) |
| { |
| ChipLogError(AppServer, "Maximum Current outside limits"); |
| return Status::ConstraintError; |
| } |
| |
| if (minimumChargeCurrent > maximumChargeCurrent) |
| { |
| ChipLogError(AppServer, "Minium Current > Maximum Current!"); |
| return Status::ConstraintError; |
| } |
| |
| if (chargingEnabledUntil.IsNull()) |
| { |
| /* Charging enabled indefinitely */ |
| ChipLogError(AppServer, "Charging enabled indefinitely"); |
| SetChargingEnabledUntil(chargingEnabledUntil); |
| } |
| else |
| { |
| /* check chargingEnabledUntil is in the future */ |
| ChipLogError(AppServer, "Charging enabled until: %lu", static_cast<long unsigned int>(chargingEnabledUntil.Value())); |
| SetChargingEnabledUntil(chargingEnabledUntil); |
| } |
| |
| /* If it looks ok, store the min & max charging current */ |
| mMaximumChargingCurrentLimitFromCommand = maximumChargeCurrent; |
| SetMinimumChargeCurrent(minimumChargeCurrent); |
| // TODO persist these to KVS |
| |
| ComputeMaxChargeCurrentLimit(); |
| |
| return HandleStateMachineEvent(EVSEStateMachineEvent::ChargingEnabledEvent); |
| } |
| |
| /** |
| * @brief Called when EVSE cluster receives EnableDischarging command |
| * |
| * @param dischargingEnabledUntil (can be null to indefinite discharging) |
| * @param maximumDischargeCurrent (in mA) |
| */ |
| Status EnergyEvseDelegate::EnableDischarging(const DataModel::Nullable<uint32_t> & dischargingEnabledUntil, |
| const int64_t & maximumDischargeCurrent) |
| { |
| ChipLogProgress(AppServer, "EnergyEvseDelegate::EnableDischarging() called."); |
| |
| // TODO save the maxDischarging Current |
| // TODO Do something with timestamp |
| |
| return HandleStateMachineEvent(EVSEStateMachineEvent::DischargingEnabledEvent); |
| } |
| |
| /** |
| * @brief Routine to help schedule a timer callback to check if the EVSE should go disabled |
| * |
| * If the clock is sync'd we can work out when to call back to check when to disable the EVSE |
| * automatically. If the clock isn't sync'd the we just set a timer to check once every 30s. |
| * |
| * We first check the SupplyState to check if it is EnabledCharging or EnabledDischarging |
| * Then if the EnabledCharging/DischargingUntil is not Null, then we compute a delay to come |
| * back and check. |
| */ |
| Status EnergyEvseDelegate::ScheduleCheckOnEnabledTimeout() |
| { |
| |
| uint32_t chipEpoch = 0; |
| DataModel::Nullable<uint32_t> enabledUntilTime; |
| |
| if (mSupplyState == SupplyStateEnum::kChargingEnabled) |
| { |
| enabledUntilTime = GetChargingEnabledUntil(); |
| } |
| else if (mSupplyState == SupplyStateEnum::kDischargingEnabled) |
| { |
| enabledUntilTime = GetDischargingEnabledUntil(); |
| } |
| else |
| { |
| // In all other states the EVSE is disabled |
| return Status::Success; |
| } |
| |
| if (enabledUntilTime.IsNull()) |
| { |
| /* This is enabled indefinitely so don't schedule a callback */ |
| return Status::Success; |
| } |
| |
| CHIP_ERROR err = DeviceEnergyManagement::GetEpochTS(chipEpoch); |
| if (err == CHIP_NO_ERROR) |
| { |
| /* time is sync'd */ |
| int32_t delta = static_cast<int32_t>(enabledUntilTime.Value() - chipEpoch); |
| if (delta > 0) |
| { |
| /* The timer hasn't expired yet - set a timer to check in the future */ |
| ChipLogDetail(AppServer, "Setting EVSE Enable check timer for %ld seconds", static_cast<long int>(delta)); |
| DeviceLayer::SystemLayer().StartTimer(System::Clock::Seconds32(delta), EvseCheckTimerExpiry, this); |
| } |
| else |
| { |
| /* we have gone past the enabledUntilTime - so we need to disable */ |
| ChipLogDetail(AppServer, "EVSE enable time expired, disabling charging"); |
| Disable(); |
| } |
| } |
| else if (err == CHIP_ERROR_REAL_TIME_NOT_SYNCED) |
| { |
| /* Real time isn't sync'd -lets check again in 30 seconds - otherwise keep the charger enabled */ |
| DeviceLayer::SystemLayer().StartTimer(System::Clock::Seconds32(kPeriodicCheckIntervalRealTimeClockNotSynced_sec), |
| EvseCheckTimerExpiry, this); |
| } |
| return Status::Success; |
| } |
| |
| void EnergyEvseDelegate::EvseCheckTimerExpiry(System::Layer * systemLayer, void * delegate) |
| { |
| EnergyEvseDelegate * dg = reinterpret_cast<EnergyEvseDelegate *>(delegate); |
| |
| dg->ScheduleCheckOnEnabledTimeout(); |
| } |
| |
| /** |
| * @brief Called when EVSE cluster receives StartDiagnostics command |
| * |
| * NOTE: Application code needs to call HwDiagnosticsComplete |
| * once diagnostics have been completed. |
| */ |
| Status EnergyEvseDelegate::StartDiagnostics() |
| { |
| /* For EVSE manufacturers to customize */ |
| ChipLogProgress(AppServer, "EnergyEvseDelegate::StartDiagnostics()"); |
| |
| if (mSupplyState != SupplyStateEnum::kDisabled) |
| { |
| ChipLogError(AppServer, "EVSE: cannot be put into diagnostics mode if it is not Disabled!"); |
| return Status::Failure; |
| } |
| |
| // Update the SupplyState - this will automatically callback the Application StateChanged callback |
| SetSupplyState(SupplyStateEnum::kDisabledDiagnostics); |
| |
| return Status::Success; |
| } |
| |
| /** |
| * @brief Called when EVSE cluster receives SetTargets command |
| */ |
| Status EnergyEvseDelegate::SetTargets( |
| const DataModel::DecodableList<Structs::ChargingTargetScheduleStruct::DecodableType> & chargingTargetSchedules) |
| { |
| ChipLogProgress(AppServer, "EnergyEvseDelegate::SetTargets()"); |
| |
| EvseTargetsDelegate * targets = GetEvseTargetsDelegate(); |
| VerifyOrReturnError(targets != nullptr, Status::Failure); |
| |
| CHIP_ERROR err = targets->SetTargets(chargingTargetSchedules); |
| VerifyOrReturnError(err == CHIP_NO_ERROR, StatusIB(err).mStatus); |
| |
| /* The Application needs to be told that the Targets have been updated |
| * so it can potentially re-optimize the charging start time etc |
| */ |
| NotifyApplicationChargingPreferencesChange(); |
| |
| return Status::Success; |
| } |
| |
| Status EnergyEvseDelegate::LoadTargets() |
| { |
| ChipLogProgress(AppServer, "EnergyEvseDelegate::LoadTargets()"); |
| |
| EvseTargetsDelegate * targets = GetEvseTargetsDelegate(); |
| VerifyOrReturnError(targets != nullptr, StatusIB(CHIP_ERROR_UNINITIALIZED).mStatus); |
| |
| CHIP_ERROR err = targets->LoadTargets(); |
| VerifyOrReturnError(err == CHIP_NO_ERROR, StatusIB(err).mStatus); |
| |
| return Status::Success; |
| } |
| |
| Status EnergyEvseDelegate::GetTargets(DataModel::List<const Structs::ChargingTargetScheduleStruct::Type> & chargingTargetSchedules) |
| { |
| ChipLogProgress(AppServer, "EnergyEvseDelegate::GetTargets()"); |
| |
| EvseTargetsDelegate * targets = GetEvseTargetsDelegate(); |
| VerifyOrReturnError(targets != nullptr, StatusIB(CHIP_ERROR_UNINITIALIZED).mStatus); |
| |
| chargingTargetSchedules = targets->GetTargets(); |
| |
| return Status::Success; |
| } |
| |
| /** |
| * @brief Called when EVSE cluster receives ClearTargets command |
| */ |
| Status EnergyEvseDelegate::ClearTargets() |
| { |
| ChipLogProgress(AppServer, "EnergyEvseDelegate::ClearTargets()"); |
| |
| CHIP_ERROR err; |
| |
| EvseTargetsDelegate * targets = GetEvseTargetsDelegate(); |
| if (targets == nullptr) |
| { |
| return StatusIB(CHIP_ERROR_UNINITIALIZED).mStatus; |
| } |
| |
| err = targets->ClearTargets(); |
| if (err != CHIP_NO_ERROR) |
| { |
| ChipLogError(AppServer, "Failed to clear Evse targets: %" CHIP_ERROR_FORMAT, err.Format()); |
| return Status::Failure; |
| } |
| |
| /* The Application needs to be told that the Targets have been deleted |
| * so it can potentially re-optimize the charging start time etc |
| */ |
| NotifyApplicationChargingPreferencesChange(); |
| |
| return Status::Success; |
| } |
| |
| /* --------------------------------------------------------------------------- |
| * EVSE Hardware interface below |
| */ |
| |
| /** |
| * @brief Called by EVSE Hardware to register a callback handler mechanism |
| * |
| * This is normally called at start-up. |
| * |
| * @param EVSECallbackFunct - function pointer to call |
| * @param intptr_t - optional context to provide back to callback handler |
| */ |
| Status EnergyEvseDelegate::HwRegisterEvseCallbackHandler(EVSECallbackFunc handler, intptr_t arg) |
| { |
| if (mCallbacks.handler != nullptr) |
| { |
| ChipLogError(AppServer, "Callback handler already initialized"); |
| return Status::Failure; |
| } |
| mCallbacks.handler = handler; |
| mCallbacks.arg = arg; |
| |
| return Status::Success; |
| } |
| |
| /** |
| * @brief Called by EVSE Hardware to notify the delegate of the maximum |
| * current limit supported by the hardware. |
| * |
| * This is normally called at start-up. |
| * |
| * @param currentmA - Maximum current limit supported by the hardware |
| */ |
| Status EnergyEvseDelegate::HwSetMaxHardwareCurrentLimit(int64_t currentmA) |
| { |
| if (currentmA < kMinimumChargeCurrent) |
| { |
| return Status::ConstraintError; |
| } |
| |
| /* there is no attribute to store this so store in private variable */ |
| mMaxHardwareCurrentLimit = currentmA; |
| |
| return ComputeMaxChargeCurrentLimit(); |
| } |
| |
| /** |
| * @brief Called by EVSE Hardware to notify the delegate of maximum electrician |
| * set current limit. |
| * |
| * This is normally called at start-up when reading from DIP-switch |
| * settings. |
| * |
| * @param currentmA - Maximum current limit specified by electrician |
| */ |
| Status EnergyEvseDelegate::HwSetCircuitCapacity(int64_t currentmA) |
| { |
| if (currentmA < kMinimumChargeCurrent) |
| { |
| return Status::ConstraintError; |
| } |
| |
| mCircuitCapacity = currentmA; |
| MatterReportingAttributeChangeCallback(mEndpointId, EnergyEvse::Id, CircuitCapacity::Id); |
| |
| return ComputeMaxChargeCurrentLimit(); |
| } |
| |
| /** |
| * @brief Called by EVSE Hardware to notify the delegate of the cable assembly |
| * current limit. |
| * |
| * This is normally called when the EV is plugged into the EVSE and the |
| * PP voltage is measured by the EVSE. A pull-up resistor in the cable |
| * causes a voltage drop. Different current limits can be indicated |
| * using different resistors, which results in different voltages |
| * measured by the EVSE. |
| * |
| * @param currentmA - Maximum current limit detected from Cable assembly |
| */ |
| Status EnergyEvseDelegate::HwSetCableAssemblyLimit(int64_t currentmA) |
| { |
| if (currentmA < kMinimumChargeCurrent) |
| { |
| return Status::ConstraintError; |
| } |
| |
| /* there is no attribute to store this so store in private variable */ |
| mCableAssemblyCurrentLimit = currentmA; |
| |
| return ComputeMaxChargeCurrentLimit(); |
| } |
| |
| /** |
| * @brief Called by EVSE Hardware to indicate if EV is detected |
| * |
| * The only allowed states that the EVSE hardware can tell us about are: |
| * kNotPluggedIn |
| * kPluggedInNoDemand |
| * kPluggedInDemand |
| * |
| * The actual overall state is more complex and includes faults, |
| * enable & disable charging or discharging etc. |
| * |
| * @param StateEnum - the state of the EV being plugged in and asking for demand etc |
| */ |
| Status EnergyEvseDelegate::HwSetState(StateEnum newState) |
| { |
| switch (newState) |
| { |
| case StateEnum::kNotPluggedIn: |
| switch (mHwState) |
| { |
| case StateEnum::kNotPluggedIn: |
| // No change |
| break; |
| case StateEnum::kPluggedInNoDemand: |
| case StateEnum::kPluggedInDemand: |
| /* EVSE has been unplugged now */ |
| mHwState = newState; |
| HandleStateMachineEvent(EVSEStateMachineEvent::EVNotDetectedEvent); |
| break; |
| |
| default: |
| // invalid value for mHwState |
| ChipLogError(AppServer, "HwSetState newstate(kNotPluggedIn) - Invalid value for mHwState"); |
| mHwState = newState; // set it to the new state anyway |
| break; |
| } |
| break; |
| |
| case StateEnum::kPluggedInNoDemand: |
| switch (mHwState) |
| { |
| case StateEnum::kNotPluggedIn: |
| /* EV was unplugged, now is plugged in */ |
| mHwState = newState; |
| HandleStateMachineEvent(EVSEStateMachineEvent::EVPluggedInEvent); |
| break; |
| case StateEnum::kPluggedInNoDemand: |
| // No change |
| break; |
| case StateEnum::kPluggedInDemand: |
| /* EV was plugged in and wanted demand, now doesn't want demand */ |
| mHwState = newState; |
| HandleStateMachineEvent(EVSEStateMachineEvent::EVNoDemandEvent); |
| break; |
| default: |
| // invalid value for mHwState |
| ChipLogError(AppServer, "HwSetState newstate(kPluggedInNoDemand) - Invalid value for mHwState"); |
| mHwState = newState; // set it to the new state anyway |
| break; |
| } |
| break; |
| case StateEnum::kPluggedInDemand: |
| switch (mHwState) |
| { |
| case StateEnum::kNotPluggedIn: |
| /* EV was unplugged, now is plugged in and wants demand */ |
| mHwState = newState; |
| HandleStateMachineEvent(EVSEStateMachineEvent::EVPluggedInEvent); |
| HandleStateMachineEvent(EVSEStateMachineEvent::EVDemandEvent); |
| break; |
| case StateEnum::kPluggedInNoDemand: |
| /* EV was plugged in and didn't want demand, now does want demand */ |
| mHwState = newState; |
| HandleStateMachineEvent(EVSEStateMachineEvent::EVDemandEvent); |
| break; |
| case StateEnum::kPluggedInDemand: |
| // No change |
| break; |
| default: |
| // invalid value for mHwState |
| ChipLogError(AppServer, "HwSetState newstate(kPluggedInDemand) - Invalid value for mHwState"); |
| mHwState = newState; // set it to the new state anyway |
| break; |
| } |
| break; |
| |
| default: |
| /* All other states should be managed by the Delegate */ |
| ChipLogError(AppServer, "HwSetState received invalid enum from caller"); |
| return Status::Failure; |
| } |
| |
| return Status::Success; |
| } |
| |
| /** |
| * @brief Called by EVSE Hardware to indicate a fault |
| * |
| * @param FaultStateEnum - the fault condition detected |
| */ |
| Status EnergyEvseDelegate::HwSetFault(FaultStateEnum newFaultState) |
| { |
| ChipLogProgress(AppServer, "EnergyEvseDelegate::Fault()"); |
| |
| if (mFaultState == newFaultState) |
| { |
| ChipLogError(AppServer, "No change in fault state, ignoring call"); |
| return Status::Failure; |
| } |
| |
| /** Before we do anything we log the fault |
| * any change in FaultState reports previous fault and new fault |
| * and the state prior to the fault being raised */ |
| SendFaultEvent(newFaultState); |
| |
| /* Updated FaultState before we call into the handlers */ |
| SetFaultState(newFaultState); |
| |
| if (newFaultState == FaultStateEnum::kNoError) |
| { |
| /* Fault has been cleared */ |
| HandleStateMachineEvent(EVSEStateMachineEvent::FaultCleared); |
| } |
| else |
| { |
| /* a new Fault has been raised */ |
| HandleStateMachineEvent(EVSEStateMachineEvent::FaultRaised); |
| } |
| |
| return Status::Success; |
| } |
| |
| /** |
| * @brief Called by EVSE Hardware to Send a RFID event |
| * |
| * @param ByteSpan RFID tag value (max 10 octets) |
| */ |
| Status EnergyEvseDelegate::HwSetRFID(ByteSpan uid) |
| { |
| Events::Rfid::Type event{ .uid = uid }; |
| EventNumber eventNumber; |
| CHIP_ERROR error = LogEvent(event, mEndpointId, eventNumber); |
| if (CHIP_NO_ERROR != error) |
| { |
| ChipLogError(Zcl, "[Notify] Unable to send notify event: %s [endpointId=%d]", error.AsString(), mEndpointId); |
| return Status::Failure; |
| } |
| |
| return Status::Success; |
| } |
| |
| /** |
| * @brief Called by EVSE Hardware to share the VehicleID |
| * |
| * This routine will make a copy of the string so the callee doesn't |
| * have to hold onto it forever. |
| * |
| * @param CharSpan containing up to 32 chars. |
| */ |
| Status EnergyEvseDelegate::HwSetVehicleID(const CharSpan & newValue) |
| { |
| // TODO this code to be refactored - See Issue #30993 |
| if (!mVehicleID.IsNull() && newValue.data_equal(mVehicleID.Value())) |
| { |
| return Status::Success; |
| } |
| |
| /* create a copy of the string so the callee doesn't have to keep it */ |
| char * destinationBuffer = new char[kMaxVehicleIDBufSize]; |
| |
| MutableCharSpan destinationString(destinationBuffer, kMaxVehicleIDBufSize); |
| CHIP_ERROR err = CopyCharSpanToMutableCharSpan(newValue, destinationString); |
| if (err != CHIP_NO_ERROR) |
| { |
| ChipLogError(AppServer, "HwSetVehicleID - could not copy vehicleID"); |
| delete[] destinationBuffer; |
| return Status::Failure; |
| } |
| |
| if (!mVehicleID.IsNull()) |
| { |
| delete[] mVehicleID.Value().data(); |
| } |
| |
| mVehicleID = MakeNullable(static_cast<CharSpan>(destinationString)); |
| |
| ChipLogDetail(AppServer, "VehicleID updated %.*s", static_cast<int>(mVehicleID.Value().size()), mVehicleID.Value().data()); |
| MatterReportingAttributeChangeCallback(mEndpointId, EnergyEvse::Id, VehicleID::Id); |
| |
| return Status::Success; |
| } |
| |
| /** |
| * @brief Called by EVSE Hardware to indicate that it has finished its diagnostics test |
| */ |
| Status EnergyEvseDelegate::HwDiagnosticsComplete() |
| { |
| if (mSupplyState != SupplyStateEnum::kDisabledDiagnostics) |
| { |
| ChipLogError(AppServer, "Incorrect state to be completing diagnostics"); |
| return Status::Failure; |
| } |
| |
| /* Restore the SupplyState to Disabled (per spec) - client will need to |
| * re-enable charging or discharging to get out of this state */ |
| SetSupplyState(SupplyStateEnum::kDisabled); |
| |
| return Status::Success; |
| } |
| /* --------------------------------------------------------------------------- |
| * Functions below are private helper functions internal to the delegate |
| */ |
| |
| /** |
| * @brief Main EVSE state machine |
| * |
| * This routine handles state transition events to determine behaviour |
| * |
| * |
| */ |
| Status EnergyEvseDelegate::HandleStateMachineEvent(EVSEStateMachineEvent event) |
| { |
| switch (event) |
| { |
| case EVSEStateMachineEvent::EVPluggedInEvent: |
| ChipLogDetail(AppServer, "EVSE: EV PluggedIn event"); |
| return HandleEVPluggedInEvent(); |
| break; |
| case EVSEStateMachineEvent::EVNotDetectedEvent: |
| ChipLogDetail(AppServer, "EVSE: EV NotDetected event"); |
| return HandleEVNotDetectedEvent(); |
| break; |
| case EVSEStateMachineEvent::EVNoDemandEvent: |
| ChipLogDetail(AppServer, "EVSE: EV NoDemand event"); |
| return HandleEVNoDemandEvent(); |
| break; |
| case EVSEStateMachineEvent::EVDemandEvent: |
| ChipLogDetail(AppServer, "EVSE: EV Demand event"); |
| return HandleEVDemandEvent(); |
| break; |
| case EVSEStateMachineEvent::ChargingEnabledEvent: |
| ChipLogDetail(AppServer, "EVSE: ChargingEnabled event"); |
| return HandleChargingEnabledEvent(); |
| break; |
| case EVSEStateMachineEvent::DischargingEnabledEvent: |
| ChipLogDetail(AppServer, "EVSE: DischargingEnabled event"); |
| return HandleDischargingEnabledEvent(); |
| break; |
| case EVSEStateMachineEvent::DisabledEvent: |
| ChipLogDetail(AppServer, "EVSE: Disabled event"); |
| return HandleDisabledEvent(); |
| break; |
| case EVSEStateMachineEvent::FaultRaised: |
| ChipLogDetail(AppServer, "EVSE: FaultRaised event"); |
| return HandleFaultRaised(); |
| break; |
| case EVSEStateMachineEvent::FaultCleared: |
| ChipLogDetail(AppServer, "EVSE: FaultCleared event"); |
| return HandleFaultCleared(); |
| break; |
| default: |
| return Status::Failure; |
| } |
| return Status::Success; |
| } |
| |
| Status EnergyEvseDelegate::HandleEVPluggedInEvent() |
| { |
| /* check if we are already plugged in or not */ |
| if (mState == StateEnum::kNotPluggedIn) |
| { |
| /* EV was not plugged in - start a new session */ |
| // TODO get energy meter readings - #35370 |
| mSession.StartSession(mEndpointId, 0, 0); |
| SendEVConnectedEvent(); |
| |
| /* Set the state to either PluggedInNoDemand or PluggedInDemand as indicated by mHwState */ |
| SetState(mHwState); |
| } |
| // else we are already plugged in - ignore |
| return Status::Success; |
| } |
| |
| Status EnergyEvseDelegate::HandleEVNotDetectedEvent() |
| { |
| if (mState == StateEnum::kPluggedInCharging || mState == StateEnum::kPluggedInDischarging) |
| { |
| /* |
| * EV was transferring current - unusual to get to this case without |
| * first having the state set to kPluggedInNoDemand or kPluggedInDemand |
| */ |
| SendEnergyTransferStoppedEvent(EnergyTransferStoppedReasonEnum::kOther); |
| } |
| |
| // TODO get energy meter readings - #35370 |
| mSession.StopSession(mEndpointId, 0, 0); |
| SendEVNotDetectedEvent(); |
| SetState(StateEnum::kNotPluggedIn); |
| return Status::Success; |
| } |
| |
| Status EnergyEvseDelegate::HandleEVNoDemandEvent() |
| { |
| if (mState == StateEnum::kPluggedInCharging || mState == StateEnum::kPluggedInDischarging) |
| { |
| /* |
| * EV was transferring current - EV decided to stop |
| */ |
| mSession.RecalculateSessionDuration(mEndpointId); |
| SendEnergyTransferStoppedEvent(EnergyTransferStoppedReasonEnum::kEVStopped); |
| } |
| /* We must still be plugged in to get here - so no need to check if we are plugged in! */ |
| SetState(StateEnum::kPluggedInNoDemand); |
| return Status::Success; |
| } |
| Status EnergyEvseDelegate::HandleEVDemandEvent() |
| { |
| /* Check to see if the supply is enabled for charging / discharging*/ |
| switch (mSupplyState) |
| { |
| case SupplyStateEnum::kChargingEnabled: |
| ComputeMaxChargeCurrentLimit(); |
| SetState(StateEnum::kPluggedInCharging); |
| SendEnergyTransferStartedEvent(); |
| break; |
| case SupplyStateEnum::kDischargingEnabled: |
| // TODO ComputeMaxDischargeCurrentLimit() - Needs to be implemented |
| SetState(StateEnum::kPluggedInDischarging); |
| SendEnergyTransferStartedEvent(); |
| break; |
| case SupplyStateEnum::kDisabled: |
| case SupplyStateEnum::kDisabledError: |
| case SupplyStateEnum::kDisabledDiagnostics: |
| /* We must be plugged in, and the event is asking for demand |
| * but we can't charge or discharge now - leave it as kPluggedInDemand */ |
| SetState(StateEnum::kPluggedInDemand); |
| break; |
| default: |
| break; |
| } |
| return Status::Success; |
| } |
| |
| Status EnergyEvseDelegate::CheckFaultOrDiagnostic() |
| { |
| if (mFaultState != FaultStateEnum::kNoError) |
| { |
| ChipLogError(AppServer, "EVSE: Trying to handle command when fault is present"); |
| return Status::Failure; |
| } |
| |
| if (mSupplyState == SupplyStateEnum::kDisabledDiagnostics) |
| { |
| ChipLogError(AppServer, "EVSE: Trying to handle command when in diagnostics mode"); |
| return Status::Failure; |
| } |
| return Status::Success; |
| } |
| |
| Status EnergyEvseDelegate::HandleChargingEnabledEvent() |
| { |
| /* Check there is no Fault or Diagnostics condition */ |
| Status status = CheckFaultOrDiagnostic(); |
| if (status != Status::Success) |
| { |
| return status; |
| } |
| |
| /* update SupplyState to say that charging is now enabled */ |
| SetSupplyState(SupplyStateEnum::kChargingEnabled); |
| |
| switch (mState) |
| { |
| case StateEnum::kNotPluggedIn: |
| case StateEnum::kPluggedInNoDemand: |
| break; |
| case StateEnum::kPluggedInDemand: |
| ComputeMaxChargeCurrentLimit(); |
| SetState(StateEnum::kPluggedInCharging); |
| SendEnergyTransferStartedEvent(); |
| break; |
| case StateEnum::kPluggedInCharging: |
| break; |
| case StateEnum::kPluggedInDischarging: |
| /* Switched from discharging to charging */ |
| SendEnergyTransferStoppedEvent(EnergyTransferStoppedReasonEnum::kEVSEStopped); |
| |
| ComputeMaxChargeCurrentLimit(); |
| SetState(StateEnum::kPluggedInCharging); |
| SendEnergyTransferStartedEvent(); |
| break; |
| default: |
| break; |
| } |
| |
| ScheduleCheckOnEnabledTimeout(); |
| |
| return Status::Success; |
| } |
| Status EnergyEvseDelegate::HandleDischargingEnabledEvent() |
| { |
| /* Check there is no Fault or Diagnostics condition */ |
| Status status = CheckFaultOrDiagnostic(); |
| if (status != Status::Success) |
| { |
| return status; |
| } |
| /* update SupplyState to say that charging is now enabled */ |
| SetSupplyState(SupplyStateEnum::kDischargingEnabled); |
| |
| switch (mState) |
| { |
| case StateEnum::kNotPluggedIn: |
| case StateEnum::kPluggedInNoDemand: |
| break; |
| case StateEnum::kPluggedInDemand: |
| // TODO call ComputeMaxDischargeCurrentLimit() |
| SetState(StateEnum::kPluggedInDischarging); |
| SendEnergyTransferStartedEvent(); |
| break; |
| case StateEnum::kPluggedInCharging: |
| /* Switched from charging to discharging */ |
| SendEnergyTransferStoppedEvent(EnergyTransferStoppedReasonEnum::kEVSEStopped); |
| |
| // TODO call ComputeMaxDischargeCurrentLimit() |
| SetState(StateEnum::kPluggedInDischarging); |
| SendEnergyTransferStartedEvent(); |
| break; |
| case StateEnum::kPluggedInDischarging: |
| default: |
| break; |
| } |
| |
| ScheduleCheckOnEnabledTimeout(); |
| |
| return Status::Success; |
| } |
| Status EnergyEvseDelegate::HandleDisabledEvent() |
| { |
| /* Check there is no Fault or Diagnostics condition */ |
| Status status = CheckFaultOrDiagnostic(); |
| if (status != Status::Success) |
| { |
| return status; |
| } |
| |
| /* update SupplyState to say that charging is now enabled */ |
| SetSupplyState(SupplyStateEnum::kDisabled); |
| |
| switch (mState) |
| { |
| case StateEnum::kNotPluggedIn: |
| case StateEnum::kPluggedInNoDemand: |
| case StateEnum::kPluggedInDemand: |
| break; |
| case StateEnum::kPluggedInCharging: |
| case StateEnum::kPluggedInDischarging: |
| SendEnergyTransferStoppedEvent(EnergyTransferStoppedReasonEnum::kEVSEStopped); |
| SetState(mHwState); |
| break; |
| default: |
| break; |
| } |
| |
| return Status::Success; |
| } |
| |
| /** |
| * @brief This handles the new fault |
| * |
| * Note that if multiple faults happen and this is called repeatedly |
| * We only save the previous State and SupplyState if its the first raising |
| * of the fault, so we can restore the state back once all faults have cleared |
| )*/ |
| Status EnergyEvseDelegate::HandleFaultRaised() |
| { |
| /* Save the current State and SupplyState so we can restore them if the fault clears */ |
| if (mStateBeforeFault == StateEnum::kUnknownEnumValue) |
| { |
| /* No existing fault - save this value to restore it later if it clears */ |
| mStateBeforeFault = mState; |
| } |
| |
| if (mSupplyStateBeforeFault == SupplyStateEnum::kUnknownEnumValue) |
| { |
| /* No existing fault */ |
| mSupplyStateBeforeFault = mSupplyState; |
| } |
| |
| /* Update State & SupplyState */ |
| SetState(StateEnum::kFault); |
| SetSupplyState(SupplyStateEnum::kDisabledError); |
| |
| return Status::Success; |
| } |
| Status EnergyEvseDelegate::HandleFaultCleared() |
| { |
| /* Check that something strange hasn't happened */ |
| if ((mStateBeforeFault == StateEnum::kUnknownEnumValue) || (mSupplyStateBeforeFault == SupplyStateEnum::kUnknownEnumValue)) |
| { |
| ChipLogError(AppServer, "EVSE: Something wrong trying to clear fault"); |
| return Status::Failure; |
| } |
| |
| /* Restore the State and SupplyState back to old values once all the faults have cleared |
| * Changing the State should notify the application, so it can continue charging etc |
| */ |
| SetState(mStateBeforeFault); |
| SetSupplyState(mSupplyStateBeforeFault); |
| |
| /* put back the sentinel to catch new faults if more are raised */ |
| mStateBeforeFault = StateEnum::kUnknownEnumValue; |
| mSupplyStateBeforeFault = SupplyStateEnum::kUnknownEnumValue; |
| |
| return Status::Success; |
| } |
| |
| /** |
| * @brief Called to compute the safe charging current limit |
| * |
| * mActualChargingCurrentLimit is the minimum of: |
| * - MaxHardwareCurrentLimit (of the hardware) |
| * - CircuitCapacity (set by the electrician - less than the hardware) |
| * - CableAssemblyLimit (detected when the cable is inserted) |
| * - MaximumChargeCurrent (from charging command) |
| * - UserMaximumChargeCurrent (could dynamically change) |
| * |
| */ |
| Status EnergyEvseDelegate::ComputeMaxChargeCurrentLimit() |
| { |
| int64_t oldValue; |
| |
| oldValue = mActualChargingCurrentLimit; |
| mActualChargingCurrentLimit = mMaxHardwareCurrentLimit; |
| mActualChargingCurrentLimit = min(mActualChargingCurrentLimit, mCircuitCapacity); |
| mActualChargingCurrentLimit = min(mActualChargingCurrentLimit, mCableAssemblyCurrentLimit); |
| mActualChargingCurrentLimit = min(mActualChargingCurrentLimit, mMaximumChargingCurrentLimitFromCommand); |
| mActualChargingCurrentLimit = min(mActualChargingCurrentLimit, mUserMaximumChargeCurrent); |
| |
| /* Set the actual max charging current attribute */ |
| mMaximumChargeCurrent = mActualChargingCurrentLimit; |
| |
| if (oldValue != mMaximumChargeCurrent) |
| { |
| ChipLogDetail(AppServer, "MaximumChargeCurrent updated to %ld", static_cast<long>(mMaximumChargeCurrent)); |
| MatterReportingAttributeChangeCallback(mEndpointId, EnergyEvse::Id, MaximumChargeCurrent::Id); |
| |
| /* Call the EV Charger hardware current limit callback */ |
| NotifyApplicationCurrentLimitChange(mMaximumChargeCurrent); |
| } |
| return Status::Success; |
| } |
| |
| Status EnergyEvseDelegate::NotifyApplicationCurrentLimitChange(int64_t maximumChargeCurrent) |
| { |
| EVSECbInfo cbInfo; |
| |
| cbInfo.type = EVSECallbackType::ChargeCurrentChanged; |
| cbInfo.ChargingCurrent.maximumChargeCurrent = maximumChargeCurrent; |
| |
| if (mCallbacks.handler != nullptr) |
| { |
| mCallbacks.handler(&cbInfo, mCallbacks.arg); |
| } |
| |
| return Status::Success; |
| } |
| |
| Status EnergyEvseDelegate::NotifyApplicationStateChange() |
| { |
| EVSECbInfo cbInfo; |
| |
| cbInfo.type = EVSECallbackType::StateChanged; |
| cbInfo.StateChange.state = mState; |
| cbInfo.StateChange.supplyState = mSupplyState; |
| |
| if (mCallbacks.handler != nullptr) |
| { |
| mCallbacks.handler(&cbInfo, mCallbacks.arg); |
| } |
| |
| return Status::Success; |
| } |
| |
| Status EnergyEvseDelegate::NotifyApplicationChargingPreferencesChange() |
| { |
| EVSECbInfo cbInfo; |
| |
| cbInfo.type = EVSECallbackType::ChargingPreferencesChanged; |
| |
| if (mCallbacks.handler != nullptr) |
| { |
| mCallbacks.handler(&cbInfo, mCallbacks.arg); |
| } |
| |
| return Status::Success; |
| } |
| |
| Status EnergyEvseDelegate::GetEVSEEnergyMeterValue(ChargingDischargingType meterType, int64_t & aMeterValue) |
| { |
| EVSECbInfo cbInfo; |
| |
| cbInfo.type = EVSECallbackType::EnergyMeterReadingRequested; |
| |
| cbInfo.EnergyMeterReadingRequest.meterType = meterType; |
| cbInfo.EnergyMeterReadingRequest.energyMeterValuePtr = &aMeterValue; |
| |
| if (mCallbacks.handler != nullptr) |
| { |
| mCallbacks.handler(&cbInfo, mCallbacks.arg); |
| } |
| |
| return Status::Success; |
| } |
| |
| Status EnergyEvseDelegate::SendEVConnectedEvent() |
| { |
| Events::EVConnected::Type event; |
| EventNumber eventNumber; |
| |
| if (mSession.mSessionID.IsNull()) |
| { |
| ChipLogError(AppServer, "SessionID is Null"); |
| return Status::Failure; |
| } |
| |
| event.sessionID = mSession.mSessionID.Value(); |
| |
| CHIP_ERROR err = LogEvent(event, mEndpointId, eventNumber); |
| if (CHIP_NO_ERROR != err) |
| { |
| ChipLogError(AppServer, "Unable to send notify event: %" CHIP_ERROR_FORMAT, err.Format()); |
| return Status::Failure; |
| } |
| return Status::Success; |
| } |
| |
| Status EnergyEvseDelegate::SendEVNotDetectedEvent() |
| { |
| Events::EVNotDetected::Type event; |
| EventNumber eventNumber; |
| |
| if (mSession.mSessionID.IsNull()) |
| { |
| ChipLogError(AppServer, "SessionID is Null"); |
| return Status::Failure; |
| } |
| |
| event.sessionID = mSession.mSessionID.Value(); |
| event.state = mState; |
| event.sessionDuration = mSession.mSessionDuration.Value(); |
| event.sessionEnergyCharged = mSession.mSessionEnergyCharged.Value(); |
| event.sessionEnergyDischarged = MakeOptional(mSession.mSessionEnergyDischarged.Value()); |
| |
| CHIP_ERROR err = LogEvent(event, mEndpointId, eventNumber); |
| if (CHIP_NO_ERROR != err) |
| { |
| ChipLogError(AppServer, "Unable to send notify event: %" CHIP_ERROR_FORMAT, err.Format()); |
| return Status::Failure; |
| } |
| return Status::Success; |
| } |
| |
| Status EnergyEvseDelegate::SendEnergyTransferStartedEvent() |
| { |
| Events::EnergyTransferStarted::Type event; |
| EventNumber eventNumber; |
| |
| if (mSession.mSessionID.IsNull()) |
| { |
| ChipLogError(AppServer, "SessionID is Null"); |
| return Status::Failure; |
| } |
| |
| event.sessionID = mSession.mSessionID.Value(); |
| event.state = mState; |
| /** |
| * A positive value indicates the EV has been enabled for charging and the value is |
| * taken directly from the MaximumChargeCurrent attribute. |
| * A negative value indicates that the EV has been enabled for discharging and the value can be taken |
| * from the MaximumDischargeCurrent attribute with its sign inverted. |
| */ |
| |
| if (mState == StateEnum::kPluggedInCharging) |
| { |
| /* Sample the energy meter for charging */ |
| GetEVSEEnergyMeterValue(ChargingDischargingType::kCharging, mMeterValueAtEnergyTransferStart); |
| event.maximumCurrent = mMaximumChargeCurrent; |
| } |
| else if (mState == StateEnum::kPluggedInDischarging) |
| { |
| /* Sample the energy meter for discharging */ |
| GetEVSEEnergyMeterValue(ChargingDischargingType::kDischarging, mMeterValueAtEnergyTransferStart); |
| |
| /* discharging should have a negative current */ |
| event.maximumCurrent = -mMaximumDischargeCurrent; |
| } |
| |
| CHIP_ERROR err = LogEvent(event, mEndpointId, eventNumber); |
| if (CHIP_NO_ERROR != err) |
| { |
| ChipLogError(AppServer, "Unable to send notify event: %" CHIP_ERROR_FORMAT, err.Format()); |
| return Status::Failure; |
| } |
| |
| return Status::Success; |
| } |
| Status EnergyEvseDelegate::SendEnergyTransferStoppedEvent(EnergyTransferStoppedReasonEnum reason) |
| { |
| Events::EnergyTransferStopped::Type event; |
| EventNumber eventNumber; |
| |
| if (mSession.mSessionID.IsNull()) |
| { |
| ChipLogError(AppServer, "SessionID is Null"); |
| return Status::Failure; |
| } |
| |
| event.sessionID = mSession.mSessionID.Value(); |
| event.state = mState; |
| event.reason = reason; |
| int64_t meterValueNow = 0; |
| |
| if (mState == StateEnum::kPluggedInCharging) |
| { |
| GetEVSEEnergyMeterValue(ChargingDischargingType::kCharging, meterValueNow); |
| event.energyTransferred = meterValueNow - mMeterValueAtEnergyTransferStart; |
| } |
| else if (mState == StateEnum::kPluggedInDischarging) |
| { |
| GetEVSEEnergyMeterValue(ChargingDischargingType::kDischarging, meterValueNow); |
| |
| /* discharging should have a negative value */ |
| event.energyTransferred = mMeterValueAtEnergyTransferStart - meterValueNow; |
| } |
| |
| CHIP_ERROR err = LogEvent(event, mEndpointId, eventNumber); |
| if (CHIP_NO_ERROR != err) |
| { |
| ChipLogError(AppServer, "Unable to send notify event: %" CHIP_ERROR_FORMAT, err.Format()); |
| return Status::Failure; |
| } |
| return Status::Success; |
| } |
| |
| Status EnergyEvseDelegate::SendFaultEvent(FaultStateEnum newFaultState) |
| { |
| Events::Fault::Type event; |
| EventNumber eventNumber; |
| |
| event.sessionID = mSession.mSessionID; // Note here the event sessionID can be Null! |
| event.state = mState; // This is the state prior to the fault being raised |
| event.faultStatePreviousState = mFaultState; |
| event.faultStateCurrentState = newFaultState; |
| |
| CHIP_ERROR err = LogEvent(event, mEndpointId, eventNumber); |
| if (CHIP_NO_ERROR != err) |
| { |
| ChipLogError(AppServer, "Unable to send notify event: %" CHIP_ERROR_FORMAT, err.Format()); |
| return Status::Failure; |
| } |
| return Status::Success; |
| } |
| |
| /** |
| * Attribute methods |
| */ |
| /* State */ |
| StateEnum EnergyEvseDelegate::GetState() |
| { |
| return mState; |
| } |
| |
| CHIP_ERROR EnergyEvseDelegate::SetState(StateEnum newValue) |
| { |
| StateEnum oldValue = mState; |
| if (newValue >= StateEnum::kUnknownEnumValue) |
| { |
| return CHIP_IM_GLOBAL_STATUS(ConstraintError); |
| } |
| |
| mState = newValue; |
| if (oldValue != mState) |
| { |
| ChipLogDetail(AppServer, "State updated to %d", static_cast<int>(mState)); |
| MatterReportingAttributeChangeCallback(mEndpointId, EnergyEvse::Id, State::Id); |
| NotifyApplicationStateChange(); |
| } |
| |
| return CHIP_NO_ERROR; |
| } |
| |
| /* SupplyState */ |
| SupplyStateEnum EnergyEvseDelegate::GetSupplyState() |
| { |
| return mSupplyState; |
| } |
| |
| CHIP_ERROR EnergyEvseDelegate::SetSupplyState(SupplyStateEnum newValue) |
| { |
| SupplyStateEnum oldValue = mSupplyState; |
| |
| if (newValue >= SupplyStateEnum::kUnknownEnumValue) |
| { |
| return CHIP_IM_GLOBAL_STATUS(ConstraintError); |
| } |
| |
| mSupplyState = newValue; |
| if (oldValue != mSupplyState) |
| { |
| ChipLogDetail(AppServer, "SupplyState updated to %d", static_cast<int>(mSupplyState)); |
| MatterReportingAttributeChangeCallback(mEndpointId, EnergyEvse::Id, SupplyState::Id); |
| NotifyApplicationStateChange(); |
| } |
| return CHIP_NO_ERROR; |
| } |
| |
| /* FaultState */ |
| FaultStateEnum EnergyEvseDelegate::GetFaultState() |
| { |
| return mFaultState; |
| } |
| |
| CHIP_ERROR EnergyEvseDelegate::SetFaultState(FaultStateEnum newValue) |
| { |
| FaultStateEnum oldValue = mFaultState; |
| |
| if (newValue >= FaultStateEnum::kUnknownEnumValue) |
| { |
| return CHIP_IM_GLOBAL_STATUS(ConstraintError); |
| } |
| |
| mFaultState = newValue; |
| if (oldValue != mFaultState) |
| { |
| ChipLogDetail(AppServer, "FaultState updated to %d", static_cast<int>(mFaultState)); |
| MatterReportingAttributeChangeCallback(mEndpointId, EnergyEvse::Id, FaultState::Id); |
| } |
| return CHIP_NO_ERROR; |
| } |
| |
| /* ChargingEnabledUntil */ |
| DataModel::Nullable<uint32_t> EnergyEvseDelegate::GetChargingEnabledUntil() |
| { |
| return mChargingEnabledUntil; |
| } |
| |
| CHIP_ERROR EnergyEvseDelegate::SetChargingEnabledUntil(DataModel::Nullable<uint32_t> newValue) |
| { |
| DataModel::Nullable<uint32_t> oldValue = mChargingEnabledUntil; |
| |
| mChargingEnabledUntil = newValue; |
| if (oldValue != newValue) |
| { |
| if (newValue.IsNull()) |
| { |
| ChipLogDetail(AppServer, "ChargingEnabledUntil updated to Null"); |
| } |
| else |
| { |
| ChipLogDetail(AppServer, "ChargingEnabledUntil updated to %lu", |
| static_cast<unsigned long int>(mChargingEnabledUntil.Value())); |
| } |
| |
| // Write new value to persistent storage. |
| ConcreteAttributePath path = ConcreteAttributePath(mEndpointId, EnergyEvse::Id, ChargingEnabledUntil::Id); |
| GetSafeAttributePersistenceProvider()->WriteScalarValue(path, mChargingEnabledUntil); |
| |
| MatterReportingAttributeChangeCallback(mEndpointId, EnergyEvse::Id, ChargingEnabledUntil::Id); |
| } |
| |
| return CHIP_NO_ERROR; |
| } |
| |
| /* DischargingEnabledUntil */ |
| DataModel::Nullable<uint32_t> EnergyEvseDelegate::GetDischargingEnabledUntil() |
| { |
| return mDischargingEnabledUntil; |
| } |
| |
| CHIP_ERROR EnergyEvseDelegate::SetDischargingEnabledUntil(DataModel::Nullable<uint32_t> newValue) |
| { |
| DataModel::Nullable<uint32_t> oldValue = mDischargingEnabledUntil; |
| |
| mDischargingEnabledUntil = newValue; |
| if (oldValue != newValue) |
| { |
| if (newValue.IsNull()) |
| { |
| ChipLogDetail(AppServer, "DischargingEnabledUntil updated to Null"); |
| } |
| else |
| { |
| ChipLogDetail(AppServer, "DischargingEnabledUntil updated to %lu", |
| static_cast<unsigned long int>(mDischargingEnabledUntil.Value())); |
| } |
| // Write new value to persistent storage. |
| ConcreteAttributePath path = ConcreteAttributePath(mEndpointId, EnergyEvse::Id, DischargingEnabledUntil::Id); |
| GetSafeAttributePersistenceProvider()->WriteScalarValue(path, mDischargingEnabledUntil); |
| |
| MatterReportingAttributeChangeCallback(mEndpointId, EnergyEvse::Id, DischargingEnabledUntil::Id); |
| } |
| |
| return CHIP_NO_ERROR; |
| } |
| |
| /* CircuitCapacity */ |
| int64_t EnergyEvseDelegate::GetCircuitCapacity() |
| { |
| return mCircuitCapacity; |
| } |
| |
| CHIP_ERROR EnergyEvseDelegate::SetCircuitCapacity(int64_t newValue) |
| { |
| int64_t oldValue = mCircuitCapacity; |
| |
| if (newValue < 0) |
| { |
| return CHIP_IM_GLOBAL_STATUS(ConstraintError); |
| } |
| |
| mCircuitCapacity = newValue; |
| if (oldValue != mCircuitCapacity) |
| { |
| ChipLogDetail(AppServer, "CircuitCapacity updated to %ld", static_cast<long>(mCircuitCapacity)); |
| MatterReportingAttributeChangeCallback(mEndpointId, EnergyEvse::Id, CircuitCapacity::Id); |
| } |
| return CHIP_NO_ERROR; |
| } |
| |
| /* MinimumChargeCurrent */ |
| int64_t EnergyEvseDelegate::GetMinimumChargeCurrent() |
| { |
| return mMinimumChargeCurrent; |
| } |
| |
| CHIP_ERROR EnergyEvseDelegate::SetMinimumChargeCurrent(int64_t newValue) |
| { |
| int64_t oldValue = mMinimumChargeCurrent; |
| |
| if (newValue < 0) |
| { |
| return CHIP_IM_GLOBAL_STATUS(ConstraintError); |
| } |
| |
| mMinimumChargeCurrent = newValue; |
| if (oldValue != mMinimumChargeCurrent) |
| { |
| ChipLogDetail(AppServer, "MinimumChargeCurrent updated to %ld", static_cast<long>(mMinimumChargeCurrent)); |
| MatterReportingAttributeChangeCallback(mEndpointId, EnergyEvse::Id, MinimumChargeCurrent::Id); |
| } |
| return CHIP_NO_ERROR; |
| } |
| |
| /* MaximumChargeCurrent */ |
| int64_t EnergyEvseDelegate::GetMaximumChargeCurrent() |
| { |
| return mMaximumChargeCurrent; |
| } |
| |
| /* MaximumDischargeCurrent */ |
| int64_t EnergyEvseDelegate::GetMaximumDischargeCurrent() |
| { |
| return mMaximumDischargeCurrent; |
| } |
| |
| CHIP_ERROR EnergyEvseDelegate::SetMaximumDischargeCurrent(int64_t newValue) |
| { |
| int64_t oldValue = mMaximumDischargeCurrent; |
| |
| if (newValue < 0) |
| { |
| return CHIP_IM_GLOBAL_STATUS(ConstraintError); |
| } |
| |
| mMaximumDischargeCurrent = newValue; |
| if (oldValue != mMaximumDischargeCurrent) |
| { |
| ChipLogDetail(AppServer, "MaximumDischargeCurrent updated to %ld", static_cast<long>(mMaximumDischargeCurrent)); |
| MatterReportingAttributeChangeCallback(mEndpointId, EnergyEvse::Id, MaximumDischargeCurrent::Id); |
| } |
| return CHIP_NO_ERROR; |
| } |
| |
| /* UserMaximumChargeCurrent */ |
| int64_t EnergyEvseDelegate::GetUserMaximumChargeCurrent() |
| { |
| return mUserMaximumChargeCurrent; |
| } |
| |
| CHIP_ERROR EnergyEvseDelegate::SetUserMaximumChargeCurrent(int64_t newValue) |
| { |
| if (newValue < 0) |
| { |
| return CHIP_IM_GLOBAL_STATUS(ConstraintError); |
| } |
| |
| int64_t oldValue = mUserMaximumChargeCurrent; |
| mUserMaximumChargeCurrent = newValue; |
| if (oldValue != newValue) |
| { |
| ChipLogDetail(AppServer, "UserMaximumChargeCurrent updated to %ld", static_cast<long>(mUserMaximumChargeCurrent)); |
| |
| ComputeMaxChargeCurrentLimit(); |
| |
| // Write new value to persistent storage. |
| ConcreteAttributePath path = ConcreteAttributePath(mEndpointId, EnergyEvse::Id, UserMaximumChargeCurrent::Id); |
| GetSafeAttributePersistenceProvider()->WriteScalarValue(path, mUserMaximumChargeCurrent); |
| |
| MatterReportingAttributeChangeCallback(mEndpointId, EnergyEvse::Id, UserMaximumChargeCurrent::Id); |
| } |
| |
| return CHIP_NO_ERROR; |
| } |
| |
| /* RandomizationDelayWindow */ |
| uint32_t EnergyEvseDelegate::GetRandomizationDelayWindow() |
| { |
| return mRandomizationDelayWindow; |
| } |
| |
| CHIP_ERROR EnergyEvseDelegate::SetRandomizationDelayWindow(uint32_t newValue) |
| { |
| uint32_t oldValue = mRandomizationDelayWindow; |
| if (newValue > kMaxRandomizationDelayWindow) |
| { |
| return CHIP_IM_GLOBAL_STATUS(ConstraintError); |
| } |
| |
| mRandomizationDelayWindow = newValue; |
| if (oldValue != newValue) |
| { |
| ChipLogDetail(AppServer, "RandomizationDelayWindow updated to %lu", |
| static_cast<unsigned long int>(mRandomizationDelayWindow)); |
| |
| // Write new value to persistent storage. |
| ConcreteAttributePath path = ConcreteAttributePath(mEndpointId, EnergyEvse::Id, RandomizationDelayWindow::Id); |
| GetSafeAttributePersistenceProvider()->WriteScalarValue(path, mRandomizationDelayWindow); |
| |
| MatterReportingAttributeChangeCallback(mEndpointId, EnergyEvse::Id, RandomizationDelayWindow::Id); |
| } |
| return CHIP_NO_ERROR; |
| } |
| |
| /* PREF attributes */ |
| DataModel::Nullable<uint32_t> EnergyEvseDelegate::GetNextChargeStartTime() |
| { |
| return mNextChargeStartTime; |
| } |
| CHIP_ERROR EnergyEvseDelegate::SetNextChargeStartTime(DataModel::Nullable<uint32_t> newNextChargeStartTimeUtc) |
| { |
| if (newNextChargeStartTimeUtc == mNextChargeStartTime) |
| { |
| return CHIP_NO_ERROR; |
| } |
| |
| mNextChargeStartTime = newNextChargeStartTimeUtc; |
| if (mNextChargeStartTime.IsNull()) |
| { |
| ChipLogDetail(AppServer, "NextChargeStartTime updated to Null"); |
| } |
| else |
| { |
| ChipLogDetail(AppServer, "NextChargeStartTime updated to %lu", |
| static_cast<unsigned long int>(mNextChargeStartTime.Value())); |
| } |
| |
| MatterReportingAttributeChangeCallback(mEndpointId, EnergyEvse::Id, NextChargeStartTime::Id); |
| |
| return CHIP_NO_ERROR; |
| } |
| |
| DataModel::Nullable<uint32_t> EnergyEvseDelegate::GetNextChargeTargetTime() |
| { |
| return mNextChargeTargetTime; |
| } |
| CHIP_ERROR EnergyEvseDelegate::SetNextChargeTargetTime(DataModel::Nullable<uint32_t> newNextChargeTargetTimeUtc) |
| { |
| if (newNextChargeTargetTimeUtc == mNextChargeTargetTime) |
| { |
| return CHIP_NO_ERROR; |
| } |
| |
| mNextChargeTargetTime = newNextChargeTargetTimeUtc; |
| if (mNextChargeTargetTime.IsNull()) |
| { |
| ChipLogDetail(AppServer, "NextChargeTargetTime updated to Null"); |
| } |
| else |
| { |
| ChipLogDetail(AppServer, "NextChargeTargetTime updated to %lu", |
| static_cast<unsigned long int>(mNextChargeTargetTime.Value())); |
| } |
| |
| MatterReportingAttributeChangeCallback(mEndpointId, EnergyEvse::Id, NextChargeTargetTime::Id); |
| |
| return CHIP_NO_ERROR; |
| } |
| |
| DataModel::Nullable<int64_t> EnergyEvseDelegate::GetNextChargeRequiredEnergy() |
| { |
| return mNextChargeRequiredEnergy; |
| } |
| CHIP_ERROR EnergyEvseDelegate::SetNextChargeRequiredEnergy(DataModel::Nullable<int64_t> newNextChargeRequiredEnergyMilliWattH) |
| { |
| if (mNextChargeRequiredEnergy == newNextChargeRequiredEnergyMilliWattH) |
| { |
| return CHIP_NO_ERROR; |
| } |
| |
| mNextChargeRequiredEnergy = newNextChargeRequiredEnergyMilliWattH; |
| if (mNextChargeRequiredEnergy.IsNull()) |
| { |
| ChipLogDetail(AppServer, "NextChargeRequiredEnergy updated to Null"); |
| } |
| else |
| { |
| ChipLogDetail(AppServer, "NextChargeRequiredEnergy updated to %ld", static_cast<long>(mNextChargeRequiredEnergy.Value())); |
| } |
| |
| MatterReportingAttributeChangeCallback(mEndpointId, EnergyEvse::Id, NextChargeRequiredEnergy::Id); |
| |
| return CHIP_NO_ERROR; |
| } |
| |
| DataModel::Nullable<Percent> EnergyEvseDelegate::GetNextChargeTargetSoC() |
| { |
| return mNextChargeTargetSoC; |
| } |
| CHIP_ERROR EnergyEvseDelegate::SetNextChargeTargetSoC(DataModel::Nullable<Percent> newValue) |
| { |
| DataModel::Nullable<Percent> oldValue = mNextChargeTargetSoC; |
| |
| mNextChargeTargetSoC = newValue; |
| if (oldValue != newValue) |
| { |
| if (newValue.IsNull()) |
| { |
| ChipLogDetail(AppServer, "NextChargeTargetSoC updated to Null"); |
| } |
| else |
| { |
| ChipLogDetail(AppServer, "NextChargeTargetSoC updated to %d %%", mNextChargeTargetSoC.Value()); |
| } |
| MatterReportingAttributeChangeCallback(mEndpointId, EnergyEvse::Id, NextChargeTargetSoC::Id); |
| } |
| return CHIP_NO_ERROR; |
| } |
| |
| /* ApproximateEVEfficiency */ |
| DataModel::Nullable<uint16_t> EnergyEvseDelegate::GetApproximateEVEfficiency() |
| { |
| return mApproximateEVEfficiency; |
| } |
| |
| CHIP_ERROR EnergyEvseDelegate::SetApproximateEVEfficiency(DataModel::Nullable<uint16_t> newValue) |
| { |
| DataModel::Nullable<uint16_t> oldValue = mApproximateEVEfficiency; |
| |
| mApproximateEVEfficiency = newValue; |
| if (oldValue != newValue) |
| { |
| if (newValue.IsNull()) |
| { |
| ChipLogDetail(AppServer, "ApproximateEVEfficiency updated to Null"); |
| } |
| else |
| { |
| ChipLogDetail(AppServer, "ApproximateEVEfficiency updated to %d", mApproximateEVEfficiency.Value()); |
| } |
| // Write new value to persistent storage. |
| ConcreteAttributePath path = ConcreteAttributePath(mEndpointId, EnergyEvse::Id, ApproximateEVEfficiency::Id); |
| GetSafeAttributePersistenceProvider()->WriteScalarValue(path, mApproximateEVEfficiency); |
| |
| MatterReportingAttributeChangeCallback(mEndpointId, EnergyEvse::Id, ApproximateEVEfficiency::Id); |
| } |
| |
| return CHIP_NO_ERROR; |
| } |
| |
| /* SOC attributes */ |
| DataModel::Nullable<Percent> EnergyEvseDelegate::GetStateOfCharge() |
| { |
| return mStateOfCharge; |
| } |
| DataModel::Nullable<int64_t> EnergyEvseDelegate::GetBatteryCapacity() |
| { |
| return mBatteryCapacity; |
| } |
| |
| /* PNC attributes*/ |
| DataModel::Nullable<CharSpan> EnergyEvseDelegate::GetVehicleID() |
| { |
| return mVehicleID; |
| } |
| |
| /* Session SESS attributes */ |
| DataModel::Nullable<uint32_t> EnergyEvseDelegate::GetSessionID() |
| { |
| return mSession.mSessionID; |
| } |
| DataModel::Nullable<uint32_t> EnergyEvseDelegate::GetSessionDuration() |
| { |
| return mSession.mSessionDuration; |
| } |
| DataModel::Nullable<int64_t> EnergyEvseDelegate::GetSessionEnergyCharged() |
| { |
| return mSession.mSessionEnergyCharged; |
| } |
| DataModel::Nullable<int64_t> EnergyEvseDelegate::GetSessionEnergyDischarged() |
| { |
| return mSession.mSessionEnergyDischarged; |
| } |
| |
| /** |
| * @brief Helper function to get know if the EV is plugged in based on state |
| * (regardless of if it is actually transferring energy) |
| */ |
| bool EnergyEvseDelegate::IsEvsePluggedIn() |
| { |
| return (mState == StateEnum::kPluggedInCharging || mState == StateEnum::kPluggedInDemand || |
| mState == StateEnum::kPluggedInDischarging || mState == StateEnum::kPluggedInNoDemand); |
| } |
| |
| /** |
| * @brief This function samples the start-time, and energy meter to hold the session info |
| * |
| * @param endpointId - The endpoint to report the update on |
| * @param chargingMeterValue - The current value of the energy meter (charging) in mWh |
| * @param dischargingMeterValue - The current value of the energy meter (discharging) in mWh |
| */ |
| void EvseSession::StartSession(EndpointId endpointId, int64_t chargingMeterValue, int64_t dischargingMeterValue) |
| { |
| /* Get Timestamp */ |
| uint32_t chipEpoch = 0; |
| CHIP_ERROR err = DeviceEnergyManagement::GetEpochTS(chipEpoch); |
| if (err != CHIP_NO_ERROR) |
| { |
| /* Note that the error will be also be logged inside GetErrorTS() - |
| * adding context here to help debugging */ |
| ChipLogError(AppServer, "EVSE: Unable to get current time when starting session - err:%" CHIP_ERROR_FORMAT, err.Format()); |
| return; |
| } |
| mStartTime = chipEpoch; |
| |
| mSessionEnergyChargedAtStart = chargingMeterValue; |
| mSessionEnergyDischargedAtStart = dischargingMeterValue; |
| |
| if (mSessionID.IsNull()) |
| { |
| mSessionID = MakeNullable(static_cast<uint32_t>(0)); |
| } |
| else |
| { |
| uint32_t sessionID = mSessionID.Value() + 1; |
| mSessionID = MakeNullable(sessionID); |
| } |
| |
| /* Reset other session values */ |
| mSessionDuration = MakeNullable(static_cast<uint32_t>(0)); |
| mSessionEnergyCharged = MakeNullable(static_cast<int64_t>(0)); |
| mSessionEnergyDischarged = MakeNullable(static_cast<int64_t>(0)); |
| |
| MatterReportingAttributeChangeCallback(endpointId, EnergyEvse::Id, SessionID::Id); |
| MatterReportingAttributeChangeCallback(endpointId, EnergyEvse::Id, SessionDuration::Id); |
| MatterReportingAttributeChangeCallback(endpointId, EnergyEvse::Id, SessionEnergyCharged::Id); |
| MatterReportingAttributeChangeCallback(endpointId, EnergyEvse::Id, SessionEnergyDischarged::Id); |
| |
| // Write values to persistent storage. |
| ConcreteAttributePath path = ConcreteAttributePath(endpointId, EnergyEvse::Id, SessionID::Id); |
| GetSafeAttributePersistenceProvider()->WriteScalarValue(path, mSessionID); |
| |
| // TODO persist mStartTime |
| // TODO persist mSessionEnergyChargedAtStart |
| // TODO persist mSessionEnergyDischargedAtStart |
| } |
| |
| /** |
| * @brief This function updates the session information at the unplugged event |
| * |
| * @param endpointId - The endpoint to report the update on |
| * @param chargingMeterValue - The current value of the energy meter (charging) in mWh |
| * @param dischargingMeterValue - The current value of the energy meter (discharging) in mWh |
| */ |
| void EvseSession::StopSession(EndpointId endpointId, int64_t chargingMeterValue, int64_t dischargingMeterValue) |
| { |
| RecalculateSessionDuration(endpointId); |
| UpdateEnergyCharged(endpointId, chargingMeterValue); |
| UpdateEnergyDischarged(endpointId, dischargingMeterValue); |
| } |
| |
| /*---------------------- EvseSession functions --------------------------*/ |
| |
| /** |
| * @brief This function updates the session attrs to allow read attributes to return latest values |
| * |
| * @param endpointId - The endpoint to report the update on |
| */ |
| void EvseSession::RecalculateSessionDuration(EndpointId endpointId) |
| { |
| /* Get Timestamp */ |
| uint32_t chipEpoch = 0; |
| CHIP_ERROR err = DeviceEnergyManagement::GetEpochTS(chipEpoch); |
| if (err != CHIP_NO_ERROR) |
| { |
| /* Note that the error will be also be logged inside GetErrorTS() - |
| * adding context here to help debugging */ |
| ChipLogError(AppServer, "EVSE: Unable to get current time when updating session duration - err:%" CHIP_ERROR_FORMAT, |
| err.Format()); |
| return; |
| } |
| |
| uint32_t duration = chipEpoch - mStartTime; |
| mSessionDuration = MakeNullable(duration); |
| MatterReportingAttributeChangeCallback(endpointId, EnergyEvse::Id, SessionDuration::Id); |
| } |
| |
| /** |
| * @brief This function updates the EnergyCharged meter value |
| * |
| * @param endpointId - The endpoint to report the update on |
| * @param chargingMeterValue - The value of the energy meter (charging) in mWh |
| */ |
| void EvseSession::UpdateEnergyCharged(EndpointId endpointId, int64_t chargingMeterValue) |
| { |
| mSessionEnergyCharged = MakeNullable(chargingMeterValue - mSessionEnergyChargedAtStart); |
| MatterReportingAttributeChangeCallback(endpointId, EnergyEvse::Id, SessionEnergyCharged::Id); |
| } |
| |
| /** |
| * @brief This function updates the EnergyDischarged meter value |
| * |
| * @param endpointId - The endpoint to report the update on |
| * @param dischargingMeterValue - The value of the energy meter (discharging) in mWh |
| */ |
| void EvseSession::UpdateEnergyDischarged(EndpointId endpointId, int64_t dischargingMeterValue) |
| { |
| mSessionEnergyDischarged = MakeNullable(dischargingMeterValue - mSessionEnergyDischargedAtStart); |
| MatterReportingAttributeChangeCallback(endpointId, EnergyEvse::Id, SessionEnergyDischarged::Id); |
| } |
