# Copyright (c) 2021 Project CHIP Authors
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# Auto-generated scripts for harness use only, please review before automation. The endpoints and cluster names are currently set to default

name: 3.2.2. [TC-ACT-2.2] Primary functionality with server as DUT

PICS:
    - ACT.S

config:
    nodeId: 0x12344321
    cluster: "Basic Information"
    endpoint: 0

tests:
    - label:
          "Step 1: Commission DUT to TH (can be skipped if done in a preceding
          test)"
      verification: |

      disabled: true

    - label:
          "Step 2a: Using the manufacturer provided means, create multiple
          groups with each multiple bridged devices (endpoints)"
      PICS: ACT.S.A0001 && ACT.S.M.FillEndpointLists
      verification: |
          Create multiple groups with each multiple bridged devices (endpoints)
      disabled: true

    - label: "Step 2b: Read EndpointLists attribute"
      verification: |
          ./chip-tool actions read endpoint-lists 1 1

          Via the TH (chip-tool), verify the EndpointLists attribute that contains EndpointListStructs.

          [1658426570.716289][16527:16532] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0025 Attribute 0x0000_0001 DataVersion: 3768747568
          [1692262148.439645][3623:3625] CHIP:TOO:   EndpointLists: 2 entries
          [1692262148.439718][3623:3625] CHIP:TOO:     [1]: {
          [1692262148.439742][3623:3625] CHIP:TOO:       EndpointListID: 57345
          [1692262148.439765][3623:3625] CHIP:TOO:       Name: Room 1
          [1692262148.439785][3623:3625] CHIP:TOO:       Type: 1
          [1692262148.439808][3623:3625] CHIP:TOO:       Endpoints: 2 entries
          [1692262148.439833][3623:3625] CHIP:TOO:         [1]: 9
          [1692262148.439857][3623:3625] CHIP:TOO:         [2]: 10
          [1692262148.439879][3623:3625] CHIP:TOO:      }
          [1692262148.439908][3623:3625] CHIP:TOO:     [2]: {
          [1692262148.439930][3623:3625] CHIP:TOO:       EndpointListID: 57346
          [1692262148.439950][3623:3625] CHIP:TOO:       Name: Room 2
          [1692262148.439968][3623:3625] CHIP:TOO:       Type: 1
          [1692262148.439990][3623:3625] CHIP:TOO:       Endpoints: 2 entries
          [1692262148.440013][3623:3625] CHIP:TOO:         [1]: 11
          [1692262148.440036][3623:3625] CHIP:TOO:         [2]: 12
          [1692262148.440056][3623:3625] CHIP:TOO:      }
      disabled: true

    - label:
          "Step 2c: Using the manufacturer provided means, update the name of
          one of the groups"
      PICS: ACT.S.A0001 && ACT.S.M.FillEndpointLists
      verification: |
          press r in bridge-app to rename
          (in the example, renamed "Room 1" to "Room 1 renamed")
      disabled: true

    - label: "Step 2d: Read EndpointLists attribute again"
      PICS: ACT.S.A0001 && ACT.S.M.FillEndpointLists
      verification: |
          ./chip-tool actions read endpoint-lists 1 1

          Via the TH (chip-tool), verify the EndpointLists attribute that contains EndpointListStructs.

          [1658408033.786811][14495:14500] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0025 Attribute 0x0000_0001 DataVersion: 3742844648
          [1692262230.546573][3626:3628] CHIP:TOO:   EndpointLists: 2 entries
          [1692262230.546738][3626:3628] CHIP:TOO:     [1]: {
          [1692262230.546826][3626:3628] CHIP:TOO:       EndpointListID: 57345
          [1692262230.546884][3626:3628] CHIP:TOO:       Name: Room 1 renamed
          [1692262230.546937][3626:3628] CHIP:TOO:       Type: 1
          [1692262230.547022][3626:3628] CHIP:TOO:       Endpoints: 2 entries
          [1692262230.547206][3626:3628] CHIP:TOO:         [1]: 9
          [1692262230.547270][3626:3628] CHIP:TOO:         [2]: 10
          [1692262230.547327][3626:3628] CHIP:TOO:      }
          [1692262230.547595][3626:3628] CHIP:TOO:     [2]: {
          [1692262230.547658][3626:3628] CHIP:TOO:       EndpointListID: 57346
          [1692262230.547783][3626:3628] CHIP:TOO:       Name: Room 2
          [1692262230.547901][3626:3628] CHIP:TOO:       Type: 1
          [1692262230.547966][3626:3628] CHIP:TOO:       Endpoints: 2 entries
          [1692262230.548027][3626:3628] CHIP:TOO:         [1]: 11
          [1692262230.548156][3626:3628] CHIP:TOO:         [2]: 12
          [1692262230.548218][3626:3628] CHIP:TOO:      }
      disabled: true

    - label: "Step 2e: compare result of step 2d to what was read in step 2b"
      PICS: ACT.S.A0001 && ACT.S.M.FillEndpointLists
      verification: |
          compare result of step 2d to what was read in step 2b, Verify name field in relevant EndpointListStruct has been updated and no other changes in EndpointLists attribute

          Step 2d log:
          Via the TH (chip-tool), verify the EndpointLists attribute that contains EndpointListStructs.

          [1658408033.786811][14495:14500] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0025 Attribute 0x0000_0001 DataVersion: 3742844648
          [1692262230.546573][3626:3628] CHIP:TOO:   EndpointLists: 2 entries
          [1692262230.546738][3626:3628] CHIP:TOO:     [1]: {
          [1692262230.546826][3626:3628] CHIP:TOO:       EndpointListID: 57345
          [1692262230.546884][3626:3628] CHIP:TOO:       Name: Room 1 renamed
          [1692262230.546937][3626:3628] CHIP:TOO:       Type: 1
          [1692262230.547022][3626:3628] CHIP:TOO:       Endpoints: 2 entries
          [1692262230.547206][3626:3628] CHIP:TOO:         [1]: 9
          [1692262230.547270][3626:3628] CHIP:TOO:         [2]: 10
          [1692262230.547327][3626:3628] CHIP:TOO:      }
          [1692262230.547595][3626:3628] CHIP:TOO:     [2]: {
          [1692262230.547658][3626:3628] CHIP:TOO:       EndpointListID: 57346
          [1692262230.547783][3626:3628] CHIP:TOO:       Name: Room 2
          [1692262230.547901][3626:3628] CHIP:TOO:       Type: 1
          [1692262230.547966][3626:3628] CHIP:TOO:       Endpoints: 2 entries
          [1692262230.548027][3626:3628] CHIP:TOO:         [1]: 11
          [1692262230.548156][3626:3628] CHIP:TOO:         [2]: 12
          [1692262230.548218][3626:3628] CHIP:TOO:      }

          Step 2b log:
          Via the TH (chip-tool), verify the EndpointLists attribute that contains EndpointListStructs.

          [1658426570.716289][16527:16532] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0025 Attribute 0x0000_0001 DataVersion: 3768747568
          [1692262230.546573][3626:3628] CHIP:TOO:   EndpointLists: 2 entries
          [1692262230.546738][3626:3628] CHIP:TOO:     [1]: {
          [1692262230.546826][3626:3628] CHIP:TOO:       EndpointListID: 57345
          [1692262230.546884][3626:3628] CHIP:TOO:       Name: Room 1
          [1692262230.546937][3626:3628] CHIP:TOO:       Type: 1
          [1692262230.547022][3626:3628] CHIP:TOO:       Endpoints: 2 entries
          [1692262230.547206][3626:3628] CHIP:TOO:         [1]: 9
          [1692262230.547270][3626:3628] CHIP:TOO:         [2]: 10
          [1692262230.547327][3626:3628] CHIP:TOO:      }
          [1692262230.547595][3626:3628] CHIP:TOO:     [2]: {
          [1692262230.547658][3626:3628] CHIP:TOO:       EndpointListID: 57346
          [1692262230.547783][3626:3628] CHIP:TOO:       Name: Room 2
          [1692262230.547901][3626:3628] CHIP:TOO:       Type: 1
          [1692262230.547966][3626:3628] CHIP:TOO:       Endpoints: 2 entries
          [1692262230.548027][3626:3628] CHIP:TOO:         [1]: 11
          [1692262230.548156][3626:3628] CHIP:TOO:         [2]: 12
          [1692262230.548218][3626:3628] CHIP:TOO:      }
      disabled: true

    - label:
          "Step 2f: Using the manufacturer provided means, move one of the
          bridged devices (one endpoint) from one group to another group"
      PICS: ACT.S.A0001 && ACT.S.M.FillEndpointLists
      verification: |
          Press f in bridge app  to move one of the bridged devices (one endpoint) from one group to another group

          (in the example, light at EP 11 was moved to Room 1 renamed)
      disabled: true

    - label: "Step 2g: Read EndpointLists attribute again"
      PICS: ACT.S.A0001 && ACT.S.M.FillEndpointLists
      verification: |
          ./chip-tool actions read endpoint-lists 1 1

          Via the TH (chip-tool), verify the EndpointLists attribute that contains EndpointListStructs.

          [1658408033.786811][14495:14500] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0025 Attribute 0x0000_0001 DataVersion: 3742844648
          [1692262498.402393][3670:3672] CHIP:TOO:   EndpointLists: 2 entries
          [1692262498.402483][3670:3672] CHIP:TOO:     [1]: {
          [1692262498.402526][3670:3672] CHIP:TOO:       EndpointListID: 57345
          [1692262498.402555][3670:3672] CHIP:TOO:       Name: Room 1 renamed
          [1692262498.402582][3670:3672] CHIP:TOO:       Type: 1
          [1692262498.402625][3670:3672] CHIP:TOO:       Endpoints: 3 entries
          [1692262498.402658][3670:3672] CHIP:TOO:         [1]: 9
          [1692262498.402689][3670:3672] CHIP:TOO:         [2]: 10
          [1692262498.402764][3670:3672] CHIP:TOO:         [3]: 11
          [1692262498.402806][3670:3672] CHIP:TOO:      }
          [1692262498.402847][3670:3672] CHIP:TOO:     [2]: {
          [1692262498.402888][3670:3672] CHIP:TOO:       EndpointListID: 57346
          [1692262498.402950][3670:3672] CHIP:TOO:       Name: Room 2
          [1692262498.402988][3670:3672] CHIP:TOO:       Type: 1
          [1692262498.403017][3670:3672] CHIP:TOO:       Endpoints: 1 entries
          [1692262498.403061][3670:3672] CHIP:TOO:         [1]: 12
          [1692262498.403124][3670:3672] CHIP:TOO:      }
      disabled: true

    - label: "Step 2h: compare result of step 2g to what was read in step 2d"
      PICS: ACT.S.A0001 && ACT.S.M.FillEndpointLists
      verification: |
          compare result of step 2g to what was read in step 2d, Verify one EP (EP 3 in this case) has been moved from one EndpointListStruct to another EndpointListStruct
      disabled: true

    - label:
          "Step 2i: Using the manufacturer provided means, remove one of the
          groups"
      PICS: ACT.S.A0001 && ACT.S.M.FillEndpointLists
      verification: |
          Press i in bridge-ap to remove one of the groups

          in this case, the 2nd group was removed
      disabled: true

    - label: "Step 2j: Read EndpointLists attribute again"
      PICS: ACT.S.A0001 && ACT.S.M.FillEndpointLists
      verification: |
          ./chip-tool actions read endpoint-lists 1 1

          Via the TH (chip-tool), verify the EndpointLists attribute that contains EndpointListStructs.

          [1658426959.409374][16560:16565] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0025 Attribute 0x0000_0001 DataVersion: 3768747568
          [1692262693.254145][3691:3693] CHIP:TOO:   EndpointLists: 1 entries
          [1692262693.254220][3691:3693] CHIP:TOO:     [1]: {
          [1692262693.254246][3691:3693] CHIP:TOO:       EndpointListID: 57345
          [1692262693.254268][3691:3693] CHIP:TOO:       Name: Room 1 renamed
          [1692262693.254290][3691:3693] CHIP:TOO:       Type: 1
          [1692262693.254315][3691:3693] CHIP:TOO:       Endpoints: 3 entries
          [1692262693.254342][3691:3693] CHIP:TOO:         [1]: 9
          [1692262693.254366][3691:3693] CHIP:TOO:         [2]: 10
          [1692262693.254390][3691:3693] CHIP:TOO:         [3]: 11
          [1692262693.254414][3691:3693] CHIP:TOO:      }
      disabled: true

    - label: "Step 2k: compare result of step 2j to what was read in step 2g"
      PICS: ACT.S.A0001 && ACT.S.M.FillEndpointLists
      verification: |
          compare result of step 2j to what was read in step 2g, Verify one EndpointListStruct (the 2nd one in this example) got removed while the other one(s) did not change
      disabled: true

    - label:
          "Step 2l: Using the manufacturer provided means, create a new group,
          which includes one of the bridged devices also present in another
          group"
      PICS: ACT.S.A0001 && ACT.S.M.OverlappingEndpointLists
      verification: |
          press l in bridge-app
          in this example, a zone was created with same light (ep 10)
      disabled: true

    - label: "Step 2m: Read EndpointLists attribute again"
      PICS: ACT.S.A0001 && ACT.S.M.OverlappingEndpointLists
      verification: |
          ./chip-tool actions read endpoint-lists 1 1

          Via the TH (chip-tool), verify the EndpointLists attribute that contains EndpointListStructs.

          [1692262731.405553][3694:3696] CHIP:TOO:   EndpointLists: 2 entries
          [1692262731.405627][3694:3696] CHIP:TOO:     [1]: {
          [1692262731.405653][3694:3696] CHIP:TOO:       EndpointListID: 57345
          [1692262731.405676][3694:3696] CHIP:TOO:       Name: Room 1 renamed
          [1692262731.405697][3694:3696] CHIP:TOO:       Type: 1
          [1692262731.405723][3694:3696] CHIP:TOO:       Endpoints: 3 entries
          [1692262731.405749][3694:3696] CHIP:TOO:         [1]: 9
          [1692262731.405774][3694:3696] CHIP:TOO:         [2]: 10
          [1692262731.405797][3694:3696] CHIP:TOO:         [3]: 11
          [1692262731.405820][3694:3696] CHIP:TOO:      }
          [1692262731.405851][3694:3696] CHIP:TOO:     [2]: {
          [1692262731.405874][3694:3696] CHIP:TOO:       EndpointListID: 57347
          [1692262731.405895][3694:3696] CHIP:TOO:       Name: Zone 3
          [1692262731.405915][3694:3696] CHIP:TOO:       Type: 2
          [1692262731.405938][3694:3696] CHIP:TOO:       Endpoints: 1 entries
          [1692262731.405962][3694:3696] CHIP:TOO:         [1]: 10
          [1692262731.405985][3694:3696] CHIP:TOO:      }
      disabled: true

    - label: "Step 2n: compare result of step 2m to what was read in step 2j"
      PICS: ACT.S.A0001 && ACT.S.M.OverlappingEndpointLists
      verification: |
          compare result of step 2m to what was read in step 2j.
          Verify a new EndpointListStruct got added (the 2nd one in this example) with an EP which is also in one of the other EndpointListStructs (EP2 in this example)
      disabled: true

    - label:
          "Step 3a: Using the manufacturer provided means, create multiple
          actions"
      PICS: ACT.S.A0000 && ACT.S.M.FillActionList
      verification: |
          no Matter messages
      disabled: true

    - label: "Step 3b: Read ActionList attribute"
      PICS: ACT.S.A0000 && ACT.S.M.FillActionList
      verification: |
          ./chip-tool actions read action-list 1 1

          Via the TH (chip-tool), verify the ActionList attribute that contains ActionListStructs.

          [1658479958.699434][26130:26135] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0025 Attribute 0x0000_0000 DataVersion: 198994220
          [1658479958.699494][26130:26135] CHIP:TOO:   ActionList: 2 entries
          [1658479958.699549][26130:26135] CHIP:TOO:     [1]: {
          [1658479958.699582][26130:26135] CHIP:TOO:       ActionID: 4097
          [1658479958.699597][26130:26135] CHIP:TOO:       Name: Room 1 On
          [1658479958.699611][26130:26135] CHIP:TOO:       Type: 3
          [1658479958.699624][26130:26135] CHIP:TOO:       EndpointListID: 57345
          [1658479958.699638][26130:26135] CHIP:TOO:       SupportedCommands: 1
          [1658479958.699652][26130:26135] CHIP:TOO:       State: 0
          [1658479958.699665][26130:26135] CHIP:TOO:      }
          [1658479958.699689][26130:26135] CHIP:TOO:     [2]: {
          [1658479958.699702][26130:26135] CHIP:TOO:       ActionID: 4098
          [1658479958.699715][26130:26135] CHIP:TOO:       Name: Turn On Room 2
          [1658479958.699727][26130:26135] CHIP:TOO:       Type: 3
          [1658479958.699740][26130:26135] CHIP:TOO:       EndpointListID: 57346
          [1658479958.699753][26130:26135] CHIP:TOO:       SupportedCommands: 1
          [1658479958.699765][26130:26135] CHIP:TOO:       State: 0
          [1658479958.699777][26130:26135] CHIP:TOO:      }
      disabled: true

    - label:
          "Step 3c: Using the manufacturer provided means, update the name of
          one of the actions"
      PICS: ACT.S.A0000 && ACT.S.M.FillActionList
      verification: |
          Press m in bridge-app to update the name of one action
      disabled: true

    - label: "Step 3d: Read ActionList attribute again"
      PICS: ACT.S.A0000 && ACT.S.M.FillActionList
      verification: |
          ./chip-tool actions read action-list 1 1

          Via the TH (chip-tool), verify the ActionList attribute that contains ActionListStructs.

          [1658480004.064867][26153:26158] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0025 Attribute 0x0000_0000 DataVersion: 198994220
          [1658480004.064928][26153:26158] CHIP:TOO:   ActionList: 2 entries
          [1658480004.064992][26153:26158] CHIP:TOO:     [1]: {
          [1658480004.065024][26153:26158] CHIP:TOO:       ActionID: 4097
          [1658480004.065041][26153:26158] CHIP:TOO:       Name: Turn On Room 1
          [1658480004.065057][26153:26158] CHIP:TOO:       Type: 3
          [1658480004.065073][26153:26158] CHIP:TOO:       EndpointListID: 57345
          [1658480004.065090][26153:26158] CHIP:TOO:       SupportedCommands: 1
          [1658480004.065105][26153:26158] CHIP:TOO:       State: 0
          [1658480004.065120][26153:26158] CHIP:TOO:      }
          [1658480004.065148][26153:26158] CHIP:TOO:     [2]: {
          [1658480004.065165][26153:26158] CHIP:TOO:       ActionID: 4098
          [1658480004.065179][26153:26158] CHIP:TOO:       Name: Turn On Room 2
          [1658480004.065194][26153:26158] CHIP:TOO:       Type: 3
          [1658480004.065209][26153:26158] CHIP:TOO:       EndpointListID: 57346
          [1658480004.065223][26153:26158] CHIP:TOO:       SupportedCommands: 1
          [1658480004.065238][26153:26158] CHIP:TOO:       State: 0
          [1658480004.065252][26153:26158] CHIP:TOO:      }
      disabled: true

    - label: "Step 3e: compare result of step 3d to what was read in step 3b"
      PICS: ACT.S.A0000 && ACT.S.M.FillActionList
      verification: |
          Compare step 3d and 3b and verify the name field has been changed

          Step 3d
          Via the TH (chip-tool), verify the ActionList attribute that contains ActionListStructs.

          [1658480004.064867][26153:26158] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0025 Attribute 0x0000_0000 DataVersion: 198994220
          [1658480004.064928][26153:26158] CHIP:TOO:   ActionList: 2 entries
          [1658480004.064992][26153:26158] CHIP:TOO:     [1]: {
          [1658480004.065024][26153:26158] CHIP:TOO:       ActionID: 4097
          [1658480004.065041][26153:26158] CHIP:TOO:       Name: Turn On Room 1
          [1658480004.065057][26153:26158] CHIP:TOO:       Type: 3
          [1658480004.065073][26153:26158] CHIP:TOO:       EndpointListID: 57345
          [1658480004.065090][26153:26158] CHIP:TOO:       SupportedCommands: 1
          [1658480004.065105][26153:26158] CHIP:TOO:       Status: 0
          [1658480004.065120][26153:26158] CHIP:TOO:      }
          [1658480004.065148][26153:26158] CHIP:TOO:     [2]: {
          [1658480004.065165][26153:26158] CHIP:TOO:       ActionID: 4098
          [1658480004.065179][26153:26158] CHIP:TOO:       Name: Turn On Room 2
          [1658480004.065194][26153:26158] CHIP:TOO:       Type: 3
          [1658480004.065209][26153:26158] CHIP:TOO:       EndpointListID: 57346
          [1658480004.065223][26153:26158] CHIP:TOO:       SupportedCommands: 1
          [1658480004.065238][26153:26158] CHIP:TOO:       State: 0
          [1658480004.065252][26153:26158] CHIP:TOO:      }

          Step 3b Log:
          Via the TH (chip-tool), verify the ActionList attribute that contains ActionListStructs.

          [1658479958.699434][26130:26135] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0025 Attribute 0x0000_0000 DataVersion: 198994220
          [1658479958.699494][26130:26135] CHIP:TOO:   ActionList: 2 entries
          [1658479958.699549][26130:26135] CHIP:TOO:     [1]: {
          [1658479958.699582][26130:26135] CHIP:TOO:       ActionID: 4097
          [1658479958.699597][26130:26135] CHIP:TOO:       Name: Room 1 On
          [1658479958.699611][26130:26135] CHIP:TOO:       Type: 3
          [1658479958.699624][26130:26135] CHIP:TOO:       EndpointListID: 57345
          [1658479958.699638][26130:26135] CHIP:TOO:       SupportedCommands: 1
          [1658479958.699652][26130:26135] CHIP:TOO:       Status: 0
          [1658479958.699665][26130:26135] CHIP:TOO:      }
          [1658479958.699689][26130:26135] CHIP:TOO:     [2]: {
          [1658479958.699702][26130:26135] CHIP:TOO:       ActionID: 4098
          [1658479958.699715][26130:26135] CHIP:TOO:       Name: Turn On Room 2
          [1658479958.699727][26130:26135] CHIP:TOO:       Type: 3
          [1658479958.699740][26130:26135] CHIP:TOO:       EndpointListID: 57346
          [1658479958.699753][26130:26135] CHIP:TOO:       SupportedCommands: 1
          [1658479958.699765][26130:26135] CHIP:TOO:       State: 0
          [1658479958.699777][26130:26135] CHIP:TOO:      }
      disabled: true

    - label:
          "Step 3f: Using the manufacturer provided means, remove one of the
          exposed actions"
      verification: |
          press n in bridge-app to remove one of the exposed actions.
      disabled: true

    - label: "Step 3g: Read ActionList attribute again"
      verification: |
          ./chip-tool actions read action-list 1 1

          Via the TH (chip-tool), verify the ActionList attribute that contains ActionListStructs.

          [1658480039.164683][26172:26177] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0025 Attribute 0x0000_0000 DataVersion: 198994220
          [1658480039.164758][26172:26177] CHIP:TOO:   ActionList: 1 entries
          [1658480039.164815][26172:26177] CHIP:TOO:     [1]: {
          [1658480039.164846][26172:26177] CHIP:TOO:       ActionID: 4097
          [1658480039.164872][26172:26177] CHIP:TOO:       Name: Turn On Room 1
          [1658480039.164897][26172:26177] CHIP:TOO:       Type: 3
          [1658480039.164920][26172:26177] CHIP:TOO:       EndpointListID: 57345
          [1658480039.164948][26172:26177] CHIP:TOO:       SupportedCommands: 1
          [1658480039.164974][26172:26177] CHIP:TOO:       State: 0
          [1658480039.164997][26172:26177] CHIP:TOO:      }
      disabled: true

    - label: "Step 3h: compare result of step 3g to what was read in step 3d"
      verification: |
          compare result of step 3g to what was read in step 3d
          Verify one Action (4098 in this example) got removed while the other Action(s) (4097 in this case) did not change
      disabled: true

    - label:
          "Step 3i: Using the manufacturer provided means, add a new exposed
          action"
      verification: |
          press o in bridge-app to add a new exposed action.
      disabled: true

    - label: "Step 3j: Read ActionList attribute again"
      verification: |
          ./chip-tool actions read action-list 1 1

          Via the TH (chip-tool), verify the ActionList attribute that contains ActionListStructs.

          [1658480059.199268][26178:26183] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0025 Attribute 0x0000_0000 DataVersion: 198994220
          [1658480059.199349][26178:26183] CHIP:TOO:   ActionList: 2 entries
          [1658480059.199410][26178:26183] CHIP:TOO:     [1]: {
          [1658480059.199440][26178:26183] CHIP:TOO:       ActionID: 4097
          [1658480059.199457][26178:26183] CHIP:TOO:       Name: Turn On Room 1
          [1658480059.199473][26178:26183] CHIP:TOO:       Type: 3
          [1658480059.199488][26178:26183] CHIP:TOO:       EndpointListID: 57345
          [1658480059.199505][26178:26183] CHIP:TOO:       SupportedCommands: 1
          [1658480059.199520][26178:26183] CHIP:TOO:       State: 0
          [1658480059.199534][26178:26183] CHIP:TOO:      }
          [1658480059.199562][26178:26183] CHIP:TOO:     [2]: {
          [1658480059.199578][26178:26183] CHIP:TOO:       ActionID: 4099
          [1658480059.199593][26178:26183] CHIP:TOO:       Name: Turn Off Room 1
          [1658480059.199607][26178:26183] CHIP:TOO:       Type: 3
          [1658480059.199622][26178:26183] CHIP:TOO:       EndpointListID: 57347
          [1658480059.199636][26178:26183] CHIP:TOO:       SupportedCommands: 1
          [1658480059.199651][26178:26183] CHIP:TOO:       State: 0
          [1658480059.199665][26178:26183] CHIP:TOO:      }
      disabled: true

    - label: "Step 3k: compare result of step 3j to what was read in step 3g"
      verification: |
          compare result of step 3j to what was read in step 3g
          Verify one new Action (4099 in this example) got added while the other Action(s) (4097 in this case) did not change
      disabled: true

    - label:
          "Step 4a: Using the manufacturer provided means, create multiple
          actions"
      PICS: ACT.S.A0000 && ACT.S.M.FillActionList
      verification: |
          no Matter messages
      disabled: true

    - label: "Step 4b: Read ActionList attribute"
      PICS: ACT.S.A0000
      verification: |
          ./chip-tool actions read action-list 1 1

          Via the TH (chip-tool), verify the ActionList attribute that contains ActionListStructs.

          [1658480080.135069][26185:26190] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0025 Attribute 0x0000_0000 DataVersion: 198994220
          [1658480080.135130][26185:26190] CHIP:TOO:   ActionList: 2 entries
          [1658480080.135191][26185:26190] CHIP:TOO:     [1]: {
          [1658480080.135222][26185:26190] CHIP:TOO:       ActionID: 4097
          [1658480080.135238][26185:26190] CHIP:TOO:       Name: Turn On Room 1
          [1658480080.135253][26185:26190] CHIP:TOO:       Type: 3
          [1658480080.135269][26185:26190] CHIP:TOO:       EndpointListID: 57345
          [1658480080.135285][26185:26190] CHIP:TOO:       SupportedCommands: 1
          [1658480080.135300][26185:26190] CHIP:TOO:       State: 0
          [1658480080.135315][26185:26190] CHIP:TOO:      }
          [1658480080.135342][26185:26190] CHIP:TOO:     [2]: {
          [1658480080.135357][26185:26190] CHIP:TOO:       ActionID: 4099
          [1658480080.135371][26185:26190] CHIP:TOO:       Name: Turn Off Room 1
          [1658480080.135386][26185:26190] CHIP:TOO:       Type: 3
          [1658480080.135400][26185:26190] CHIP:TOO:       EndpointListID: 57347
          [1658480080.135415][26185:26190] CHIP:TOO:       SupportedCommands: 1
          [1658480080.135430][26185:26190] CHIP:TOO:       State: 0
          [1658480080.135443][26185:26190] CHIP:TOO:      }
      disabled: true

    - label: "Step 4c: subscribe to StateChanged and ActionFailed events"
      verification: |
          To subscribe StateChanged and ActionFailed event follow below steps

          1) ./chip-tool interactive start

          2) actions subscribe-event action-failed 2 30 1 1

          Via the TH (chip-tool), Verify ActionFailed event subscription.

          [1659962630.453221][25381:25386] CHIP:EM: Removed CHIP MessageCounter:65903257 from RetransTable on exchange 50035i
          [1659962630.453246][25381:25386] CHIP:DMG: ReportDataMessage =
          [1659962630.453259][25381:25386] CHIP:DMG: {
          [1659962630.453270][25381:25386] CHIP:DMG:         SubscriptionId = 0x78f0a04c,
          [1659962630.453281][25381:25386] CHIP:DMG:         InteractionModelRevision = 1
          [1659962630.453290][25381:25386] CHIP:DMG: }
          [1659962630.453312][25381:25386] CHIP:DMG: MoveToState ReadClient[0x7f9204005990]: Moving to [AwaitingSu]
          [1659962630.453337][25381:25386] CHIP:EM: Piggybacking Ack for MessageCounter:102831868 on exchange: 50035i
          [1659962630.453364][25381:25386] CHIP:IN: Prepared secure message 0x7f9204005698 to 0x0000000000000001 (1)  of type 0x1 and protocolId (0, 1) on exchange 50035i with MessageCounter:65903258.
          [1659962630.453382][25381:25386] CHIP:IN: Sending encrypted msg 0x7f9204005698 with MessageCounter:65903258 to 0x0000000000000001 (1) at monotonic time: 0000000001ADE9B2 msec
          [1659962630.456411][25381:25386] CHIP:EM: Received message of type 0x4 with protocolId (0, 1) and MessageCounter:102831869 on exchange 50035i
          [1659962630.456431][25381:25386] CHIP:EM: Found matching exchange: 50035i, Delegate: 0x7f92040059a0
          [1659962630.456448][25381:25386] CHIP:EM: Rxd Ack; Removing MessageCounter:65903258 from Retrans Table on exchange 50035i
          [1659962630.456457][25381:25386] CHIP:EM: Removed CHIP MessageCounter:65903258 from RetransTable on exchange 50035i
          [1659962630.456475][25381:25386] CHIP:DMG: SubscribeResponse is received
          [1659962630.456497][25381:25386] CHIP:DMG: SubscribeResponseMessage =
          [1659962630.456509][25381:25386] CHIP:DMG: {
          [1659962630.456520][25381:25386] CHIP:DMG:         SubscriptionId = 0x78f0a04c,
          [1659962630.456531][25381:25386] CHIP:DMG:         MaxInterval = 0x64,
          [1659962630.456542][25381:25386] CHIP:DMG:         InteractionModelRevision = 1
          [1659962630.456551][25381:25386] CHIP:DMG: }
          [1659962630.456563][25381:25386] CHIP:DMG: Subscription established with SubscriptionID = 0x78f0a04c MinInterval = 0s MaxInterval = 100s Peer = 01:0000000000000001

          3) actions subscribe-event state-changed 2 30 1 1

          Via the TH (chip-tool), Verify StateChanged event subscription.

          [1696947597.397495][20187:20190] CHIP:DMG: ReportDataMessage =
          [1696947597.397508][20187:20190] CHIP:DMG: {
          [1696947597.397517][20187:20190] CHIP:DMG:         SubscriptionId = 0x78906430,
          [1696947597.397529][20187:20190] CHIP:DMG:         InteractionModelRevision = 11
          [1696947597.397539][20187:20190] CHIP:DMG: }
          [1696947597.397561][20187:20190] CHIP:DMG: MoveToState ReadClient[0x7fe364020f30]: Moving to [AwaitingSu]
          [1696947597.397646][20187:20190] CHIP:EM: <<< [E:22246i S:684 M:21569658 (Ack:244821317)] (S) Msg TX to 1:0000000000000001 [7884] [UDP:[fe80::ee12:c4a5:f800:bf4f%wlp0s20f3]:5540] --- Type 0001:01 (IM:StatusResponse)
          [1696947597.398261][20187:20190] CHIP:EM: >>> [E:22246i S:684 M:244821318 (Ack:21569658)] (S) Msg RX from 1:0000000000000001 [7884] --- Type 0001:04 (IM:SubscribeResponse)
          [1696947597.398292][20187:20190] CHIP:EM: Found matching exchange: 22246i, Delegate: 0x7fe364020f40
          [1696947597.398314][20187:20190] CHIP:EM: Rxd Ack; Removing MessageCounter:21569658 from Retrans Table on exchange 22246i
          [1696947597.398334][20187:20190] CHIP:DMG: SubscribeResponse is received
          [1696947597.398356][20187:20190] CHIP:DMG: SubscribeResponseMessage =
          [1696947597.398369][20187:20190] CHIP:DMG: {
          [1696947597.398382][20187:20190] CHIP:DMG:         SubscriptionId = 0x78906430,
          [1696947597.398394][20187:20190] CHIP:DMG:         MaxInterval = 0x1e,
          [1696947597.398407][20187:20190] CHIP:DMG:         InteractionModelRevision = 11
          [1696947597.398417][20187:20190] CHIP:DMG: }
          [1696947597.398431][20187:20190] CHIP:DMG: Subscription established with SubscriptionID = 0x78906430 MinInterval = 2s MaxInterval = 30s Peer = 01:0000000000000001
      disabled: true

    - label:
          "Step 4d: For each of the ActionStructs provided by DUT (see list read
          in step 4b), perform one of the actions supported (see
          SupportedCommands in this ActionStruct) by sending the command with
          this particular ActionID and a random value for InvokeID"
      verification: |
          Only InstantAction command is supported in bridge-app. When testing with a real DUT, test for all the actions supported by the DUT (list from step 4b):

          ./chip-tool actions  instant-action  0x1001 1 1

          Via the TH (chip-tool), Verify the SUCCESS response for instant-action.

          [1659955888.114483][23216:23221] CHIP:DMG:                                 StatusIB =
          [1659955888.114499][23216:23221] CHIP:DMG:                                 {
          [1659955888.114515][23216:23221] CHIP:DMG:                                         status = 0x00 (SUCCESS),
          [1659955888.114529][23216:23221] CHIP:DMG:                                 },


          ./chip-tool actions  instant-action  0x1003 1 1

          Via the TH (chip-tool), Verify the SUCCESS response for instant-action.

          [1659955888.114483][23216:23221] CHIP:DMG:                                 StatusIB =
          [1659955888.114499][23216:23221] CHIP:DMG:                                 {
          [1659955888.114515][23216:23221] CHIP:DMG:                                         status = 0x00 (SUCCESS),
          [1659955888.114529][23216:23221] CHIP:DMG:                                 },
      disabled: true

    - label:
          "Step 4e: repeat 4d for the other SupportedCommands of each
          ActionStruct"
      verification: |
          Only InstantAction command is supported in bridge-app. When testing with a real DUT, test for all the actions supported by the DUT (list from step 4b)
      disabled: true