# Copyright (c) 2021 Project CHIP Authors
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# Auto-generated scripts for harness use only, please review before automation. The endpoints and cluster names are currently set to default

name:
    3.3.20. [TC-DD-3.20] Commissioning Flow - Commission, Unpair and
    Re-commission Device [DUT - Commissioner]

PICS:
    - MCORE.ROLE.COMMISSIONER
    - MCORE.DD.QR_COMMISSIONING

config:
    nodeId: 0x12344321
    cluster: "Basic Information"
    endpoint: 0

tests:
    - label: "Note"
      verification: |
          Chip-tool command used below are an example to verify the DUT as commissioner test cases. For certification test, we expect DUT should have a capability or way to run the equivalent command.
      disabled: true

    - label: "Preconditions"
      verification: |
          1 - DUT is on an operational network and has accurate date, time, timezone, regulatory, and fabric information available.
          2 - 5.1.3 - QR code is printed on the Commissionee device or in additional provided materials (ex: manual).
      disabled: true

    - label:
          "Step 1: Place TH into commissioning mode using the TH manufacturers
          means to be discovered by the DUT Commissioner"
      verification: |
          ./chip-all-clusters-app --discriminator 3840
          Verify on TH (All-cluster-app):

          [1651109580.413197][31207:31207] CHIP:DL: Device Configuration:
          [1651109580.413259][31207:31207] CHIP:DL:   Serial Number: TEST_SN
          [1651109580.413294][31207:31207] CHIP:DL:   Vendor Id: 65521 (0xFFF1)
          [1651109580.413327][31207:31207] CHIP:DL:   Product Id: 32769 (0x8001)
          [1651109580.413358][31207:31207] CHIP:DL:   Hardware Version: 0
          [1651109580.413380][31207:31207] CHIP:DL:   Setup Pin Code (0 for UNKNOWN/ERROR): 20202021
          [1651109580.413401][31207:31207] CHIP:DL:   Setup Discriminator (0xFFFF for UNKNOWN/ERROR): 3840 (0xF00)
          [1651109580.413428][31207:31207] CHIP:DL:   Manufacturing Date: (not set)
          [1651109580.413450][31207:31207] CHIP:DL:   Device Type: 65535 (0xFFFF)
          [1651109580.413470][31207:31207] CHIP:-: ==== Onboarding payload for Standard Commissioning Flow ====
          [1651109580.413525][31207:31207] CHIP:SVR: SetupQRCode: [MT:-24J0AFN00KA0648G00]
      disabled: true

    - label: "Step 2a: Scan THs QR code using the DUT Commissioner."
      PICS: MCORE.DD.SCAN_QR_CODE
      verification: |
          1. Verify the QR code is scanned by DUT
          Note: chip-tool does not support physically scanning QR codes
      disabled: true

    - label:
          "Step 2b: DUT parses THs QR code. Follow any steps needed for the
          Commissioner/Commissionee to complete the commissioning process over
          the TH Commissionees method of device discovery"
      verification: |
          Verify on TH (All-cluster-app):
          [1651109784.452770][31207:31207] CHIP:SVR: Commissioning completed successfully
          [1651109784.452813][31207:31207] CHIP:DIS: Updating services using commissioning mode 0

          Verify on DUT (Chip-tool):
           ./chip-tool pairing code 1 MT:-24J0AFN00KA0648G00

          [1651109784376] [95553:65657838] CHIP: [CTL] Received CommissioningComplete response
          [1651109784376] [95553:65657838] CHIP: [CTL] Successfully finished commissioning step 'SendComplete'
          [1651109784376] [95553:65657838] CHIP: [CTL] Commissioning stage next step: 'SendComplete' -> 'Cleanup'
          [1651109784376] [95553:65657838] CHIP: [CTL] Performing next commissioning step 'Cleanup'
          [1651109784376] [95553:65657838] CHIP: [CTL] Successfully finished commissioning step 'Cleanup'
          [1651109784376] [95553:65657838] CHIP: [TOO] Device commissioning completed with success
      disabled: true

    - label:
          "Step 3: Using DUT Commissioner, unpair the TH Commissionee from the
          Matter network."
      verification: |
          ./chip-tool operationalcredentials remove-fabric 1 1 0
          Verify on DUT (Chip-tool):

          CHIP:DMG: Received Command Response Data, Endpoint=0 Cluster=0x0000_003E Command=0x0000_0008
          CHIP:TOO: Endpoint: 0 Cluster: 0x0000_003E Command 0x0000_0008
          CHIP:TOO:   NOCResponse: {
          CHIP:TOO:     statusCode: 0
          CHIP:TOO:     fabricIndex: 2
          CHIP:TOO:    }
          CHIP:DMG: ICR moving to [AwaitingDe]
      disabled: true

    - label:
          "Step 4: Place TH Commissionee back into commissioning mode using the
          TH manufacturers means to be discovered by the DUT Commissioner"
      verification: |
          1. Place the TH into commissioning mode by launching the app again

          ./chip-all-clusters-app --discriminator 3840
          Verify on TH (All-cluster-app):

          [1651110721.112368][31791:31791] CHIP:DL: Device Configuration:
          [1651110721.112448][31791:31791] CHIP:DL:   Serial Number: TEST_SN
          [1651110721.112501][31791:31791] CHIP:DL:   Vendor Id: 65521 (0xFFF1)
          [1651110721.112552][31791:31791] CHIP:DL:   Product Id: 32769 (0x8001)
          [1651110721.112597][31791:31791] CHIP:DL:   Hardware Version: 0
          [1651110721.112630][31791:31791] CHIP:DL:   Setup Pin Code (0 for UNKNOWN/ERROR): 20202021
          [1651110721.112662][31791:31791] CHIP:DL:   Setup Discriminator (0xFFFF for UNKNOWN/ERROR): 3840 (0xF00)
          [1651110721.112703][31791:31791] CHIP:DL:   Manufacturing Date: (not set)
          [1651110721.112737][31791:31791] CHIP:DL:   Device Type: 65535 (0xFFFF)
          [1651110721.112767][31791:31791] CHIP:-: ==== Onboarding payload for Standard Commissioning Flow ====
          [1651110721.112838][31791:31791] CHIP:SVR: SetupQRCode: [MT:-24J0AFN00KA0648G00]
      disabled: true

    - label: "Step 5a: Scan THs QR code using the DUT Commissioner."
      PICS: MCORE.DD.SCAN_QR_CODE
      verification: |
          1. Verify the QR code is scanned by DUT
          Note: chip-tool does not support physically scanning QR codes
      disabled: true

    - label:
          "Step 5b: DUT parses THs QR code. Follow any steps needed for the
          Commissioner/Commissionee to complete the commissioning process over
          the TH Commissionees method of device discovery"
      verification: |
          Verify on TH (All-cluster-app):
          [1651110724.759825][31791:31791] CHIP:SVR: Commissioning completed successfully
          [1651110724.759869][31791:31791] CHIP:DIS: Updating services using commissioning mode 0

          Verify on DUT (Chip-tool):
           ./chip-tool pairing code 1 MT:-24J0AFN00KA0648G00

          [1651110724689] [95810:65669790] CHIP: [CTL] Received CommissioningComplete response
          [1651110724689] [95810:65669790] CHIP: [CTL] Successfully finished commissioning step 'SendComplete'
          [1651110724689] [95810:65669790] CHIP: [CTL] Commissioning stage next step: 'SendComplete' -> 'Cleanup'
          [1651110724689] [95810:65669790] CHIP: [CTL] Performing next commissioning step 'Cleanup'
          [1651110724689] [95810:65669790] CHIP: [CTL] Successfully finished commissioning step 'Cleanup'
          [1651110724689] [95810:65669790] CHIP: [TOO] Device commissioning completed with success
      disabled: true