# Copyright (c) 2021 Project CHIP Authors
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# Auto-generated scripts for harness use only, please review before automation. The endpoints and cluster names are currently set to default

name:
    55.2.1. [TC-DLOG-2.1] Diagnostic Logs Cluster Commands Checks with BDX
    [DUT-Server]

PICS:
    - DLOG.S

config:
    nodeId: 0x12344321
    cluster: "Basic Information"
    endpoint: 0

tests:
    - label: "Precondition"
      verification: |
          DUT supports BDX
          Length of TransferFileDesignator is zero
          Length of TransferFileDesignator is within 32 characters
          Length of TransferFileDesignator is equal to 32 characters
          Length of TransferFileDesignator is greater than 32 characters
          To send a message that mismatches the current transfer mode
      disabled: true

    - label: "Step 1: Commission DUT to TH"
      verification: |

      disabled: true

    - label:
          "Step 2: TH sends RetrieveLogsRequest Command to DUT with
          RequestedProtocol argument as BDX : RetrieveLogsRequest (Intent =
          EndUserSupport, RequestedProtocol= BDX, TransferFileDesignator =
          TH_LOG_OK_FULL_LENGTH)"
      PICS: MCORE.BDX.Initiator
      verification: |
          diagnosticlogs retrieve-logs-request 0 1 1 0 --TransferFileDesignator Length_123456789123456789123.txt

          On TH(chip-tool), Verify that the DUT sends SendInit message with TransferFileDesignator field set to Length_1234567891234567891

          1707966626.594544][10635:10638] CHIP:ATM: SendInit
          [1707966626.594550][10635:10638] CHIP:ATM:   Proposed Transfer Control: 0x10
          [1707966626.594558][10635:10638] CHIP:ATM:   Range Control: 0x0
          [1707966626.594563][10635:10638] CHIP:ATM:   Proposed Max Block Size: 1024
          [1707966626.594569][10635:10638] CHIP:ATM:   Start Offset: 0x0000000000000000
          [1707966626.594577][10635:10638] CHIP:ATM:   Proposed Max Length: 0x0000000000000000
          [1707966626.594584][10635:10638] CHIP:ATM:   File Designator Length: 32
          [1707966626.594588][10635:10638] CHIP:ATM:   File Designator: Length_123456789123456789123.txt

          Note: end_user_support_log > 1024 bytes so that BDX inititation happens from DUT
          SendInitMsgfromDUT = true
      disabled: true

    - label:
          "Step 3: if (SendInitMsgfromDUT = true) TH Sends BDX SendAccept
          message to DUT"
      PICS: MCORE.BDX.Initiator
      verification: |
          On chip-tool TH will send the SendAccept Message to the DUT

          [1707894873.734698][34353:34356] CHIP:ATM: Sending BDX Message
          [1707894873.734710][34353:34356] CHIP:ATM: SendAccept
          [1707894873.734715][34353:34356] CHIP:ATM:   Transfer Control: 0x10
          [1707894873.734720][34353:34356] CHIP:ATM:   Max Block Size: 1024
          [1707894874.235405][34353:34356] CHIP:BDX: Got an event MsgToSend

          On TH(chip-tool), verify that the DUT responds by sending RetrieveLogsResponse Command with Success(0) status code to TH after receiving the SendAccept Message
          1707894874.239127][34353:34356] CHIP:TOO: Endpoint: 0 Cluster: 0x0000_0032 Command 0x0000_0001
          [1707894874.239189][34353:34356] CHIP:TOO:   RetrieveLogsResponse: {
          [1707894874.239208][34353:34356] CHIP:TOO:     status: 0
          [1707894874.239219][34353:34356] CHIP:TOO:     logContent:
          [1707894874.239227][34353:34356] CHIP:TOO:    }

          Check for the size of the file that was specified in the File Deginator field of the RetrieveLogsRequest Command sent to DUT and verify that the size is greater than 1024 bytes.
          The file: Length_123456789123456789123.txt (as mentioned in the file designator field) is  transferred to  /tmp  folder on the build system and the size is  > 1024 bytes

          Note: The file can be stored in any location on the build system. The current SDK imlemnetstion stores the log file transferred using BDX protocol in /tmp folder.
      disabled: true

    - label:
          "Step 4: if (SendInitMsgfromDUT = false) TH does not send BDX
          SendAccept message to DUT"
      PICS: MCORE.BDX.Initiator
      verification: |
          As SendInitMsgfromDUT = true this step is not applicable
      disabled: true

    - label:
          "Step 5: Repeat Steps from 2 to 4 by setting Intent field to
          NetworkDiag  and CrashLogs"
      verification: |

      disabled: true

    - label:
          "Step 2a: TH sends RetrieveLogsRequest Command to DUT with
          RequestedProtocol argument as BDX : RetrieveLogsRequest (Intent =
          EndUserSupport, RequestedProtocol= BDX, TransferFileDesignator =
          TH_LOG_OK_FULL_LENGTH)"
      PICS: MCORE.BDX.Initiator
      verification: |
          Repeating steps from 2 to 4 by setting Intent field to NetworkDiag

          diagnosticlogs retrieve-logs-request 1 1 1 0 --TransferFileDesignator Length_123456789123456789123.txt

          Note: nw_log  does not exist and DUT does not initiate the BDX transfer
          SendInitMsgfromDUT = false
      disabled: true

    - label:
          "Step 3a: if (SendInitMsgfromDUT = true) TH Sends BDX SendAccept
          message to DUT"
      PICS: MCORE.BDX.Initiator
      verification: |
          SendInitMsgfromDUT = false  this step is not applicable
      disabled: true

    - label:
          "Step 4a: if (SendInitMsgfromDUT = false) TH does not send BDX
          SendAccept message to DUT"
      PICS: MCORE.BDX.Initiator
      verification: |
          On TH(chip-tool), verify that the DUT responds by sending RetrieveLogsResponse Command with NoLogs(2) status code to TH and LogContent field is empty

          [1707967219.637228][10723:10726] CHIP:TOO:   RetrieveLogsResponse: {
          [1707967219.637242][10723:10726] CHIP:TOO:     status: 2
          [1707967219.637248][10723:10726] CHIP:TOO:     logContent:
          [1707967219.637253][10723:10726] CHIP:TOO:    }
      disabled: true

    - label:
          "Step 2b: TH sends RetrieveLogsRequest Command to DUT with
          RequestedProtocol argument as BDX : RetrieveLogsRequest (Intent =
          EndUserSupport, RequestedProtocol= BDX, TransferFileDesignator =
          TH_LOG_OK_FULL_LENGTH)"
      PICS: MCORE.BDX.Initiator
      verification: |
          Repeating steps from 2 to 4 by setting Intent field to CrashLogs

          diagnosticlogs retrieve-logs-request 2 1 1 0 --TransferFileDesignator Length_123456789123456789123.txt

          Note: crash_log  < 1024 Bytes  and DUT does not inittiate the BDX transfer
          SendInitMsgfromDUT = false
      disabled: true

    - label:
          "Step 3b: if (SendInitMsgfromDUT = true) TH Sends BDX SendAccept
          message to DUT"
      PICS: MCORE.BDX.Initiator
      verification: |
          SendInitMsgfromDUT = false  this step is not applicable
      disabled: true

    - label:
          "Step 4b: if (SendInitMsgfromDUT = false) TH does not send BDX
          SendAccept message to DUT"
      PICS: MCORE.BDX.Initiator
      verification: |
          On TH(chip-tool), verify that the DUT responds by sending RetrieveLogsResponse Command with Exhausted(1) status code to TH and LogContent field of RetrieveLogsResponse contains at most 1024 bytes

          1707894938.009997][34371:34374] CHIP:TOO:   RetrieveLogsResponse: {
          [1707894938.010025][34371:34374] CHIP:TOO:     status: 1
          [1707894938.010057][34371:34374] CHIP:TOO:     logContent:  RetrieveLogsResponse: {
          [1707967525.484222][10866:10869] CHIP:TOO:     status: 1
          [1707967525.484229][10866:10869] CHIP:TOO:     logContent: 353535350A
          [1707967525.484233][10866:10869] CHIP:TOO:    }
      disabled: true

    - label:
          "Step 6: TH sends RetrieveLogsRequest Command to DUT with
          RequestedProtocol argument as BDX : RetrieveLogsRequest(Intent =
          EndUserSupport, RequestedProtocol= BDX, TransferFileDesignator =
          TH_LOG_OK_NORMAL)"
      PICS: MCORE.BDX.Initiator
      verification: |
          "diagnosticlogs retrieve-logs-request 0 1 1 0 --TransferFileDesignator Length_1234567.txt

          On TH(chip-tool), Verify that the DUT sends SendInit message with TransferFileDesignator field set to Length_1234567891234567891
          [1707967645.770994][10882:10885] CHIP:ATM: SendInit
          [1707967645.770997][10882:10885] CHIP:ATM:   Proposed Transfer Control: 0x10
          [1707967645.771001][10882:10885] CHIP:ATM:   Range Control: 0x0
          [1707967645.771004][10882:10885] CHIP:ATM:   Proposed Max Block Size: 1024
          [1707967645.771009][10882:10885] CHIP:ATM:   Start Offset: 0x0000000000000000
          [1707967645.771011][10882:10885] CHIP:ATM:   Proposed Max Length: 0x0000000000000000
          [1707967645.771014][10882:10885] CHIP:ATM:   File Designator Length: 18
          [1707967645.771018][10882:10885] CHIP:ATM:   File Designator: Length_1234567.txt

          Note: end_user_support_log > 1024 bytes so that BDX inititation happens from DUT
          SendInitMsgfromDUT = true"
      disabled: true

    - label:
          "Step 7: if (SendInitMsgfromDUT = true) TH Sends
          StatusReport(GeneralCode: FAILURE, ProtocolId: BDX, ProtocolCode:
          TH_LOG_ERROR_TRANSFER_METHOD_NOT_SUPPORTED) to DUT"
      PICS: MCORE.BDX.Initiator
      verification: |
          Not Verifiable. This step requires additional API for error injection.(Not available in the Chip-tool)
      disabled: true

    - label:
          "Step 8: TH sends RetrieveLogsRequest Command RequestedProtocol as
          ResponsePayload : RetrieveLogsRequest(Intent =
          EndUserSupport,RequestedProtocol = ResponsePayload) Repeat this step
          by setting Intent field to . NetworkDiag . CrashLogs"
      PICS: MCORE.BDX.Initiator
      verification: |
          "diagnosticlogs retrieve-logs-request 0 0 1 0

          On TH(chip-tool), Verify that the DUT responds with Success(0) status code for the RetrieveLogsResponse command Verify that LogContent field contains at most 1024 bytes

          RetrieveLogsResponse: {
          [1707901602.742523][36080:36083] CHIP:TOO:     status: 0
          [1707901602.742542][36080:36083] CHIP:TOO:     logContent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

          Repeat this setp by setting Intent filed to NetworkDiag
          diagnosticlogs retrieve-logs-request 1 0 1 0

          On TH(chip-tool), verify that the DUT responds with NoLogs(2) status code to TH for the RetrieveLogsResponse command  and LogContent field is empty

          [1707967219.637228][10723:10726] CHIP:TOO:   RetrieveLogsResponse: {
          [1707967219.637242][10723:10726] CHIP:TOO:     status: 2
          [1707967219.637248][10723:10726] CHIP:TOO:     logContent:
          [1707967219.637253][10723:10726] CHIP:TOO:    }

          Repeat this setp by setting Intent filed to Crash_log
          diagnosticlogs retrieve-logs-request 2 0 1 0

          On TH(chip-tool), verify that the DUT responds with success(0) status code to TH for the RetrieveLogsResponse command and LogContent field of RetrieveLogsResponse contains at most 1024 bytes

          [1707982645.639415][11765:11767] CHIP:TOO:   RetrieveLogsResponse: {
          [1707982645.639457][11765:11767] CHIP:TOO:     status: 0
          [1707982645.639489][11765:11767] CHIP:TOO:     logContent: logContent: 353535350A
          }"
      disabled: true

    - label:
          "Step 9: TH sends RetrieveLogsRequest Command to DUT without
          TransferFileDesignator argument : RetrieveLogsRequest(Intent =
          EndUserSupport, RequestedProtocol= BDX)"
      PICS: MCORE.BDX.Initiator
      verification: |
          "diagnosticlogs retrieve-logs-request 0 1 1 0

          On TH(chip-tool), Verify that the DUT responds with INVALID_COMMAND for the RetrieveLogsRequest that was sent without TransferFileDesignator

          [1707924172.241489][42120:42123] CHIP:DMG:                 InvokeResponseIB =
          [1707924172.241494][42120:42123] CHIP:DMG:                 {
          [1707924172.241497][42120:42123] CHIP:DMG:                         CommandStatusIB =
          [1707924172.241500][42120:42123] CHIP:DMG:                         {
          [1707924172.241503][42120:42123] CHIP:DMG:                                 CommandPathIB =
          [1707924172.241507][42120:42123] CHIP:DMG:                                 {
          [1707924172.241511][42120:42123] CHIP:DMG:                                         EndpointId = 0x0,
          [1707924172.241514][42120:42123] CHIP:DMG:                                         ClusterId = 0x32,
          [1707924172.241519][42120:42123] CHIP:DMG:                                         CommandId = 0x0,
          [1707924172.241527][42120:42123] CHIP:DMG:                                 },
          [1707924172.241536][42120:42123] CHIP:DMG:
          [1707924172.241539][42120:42123] CHIP:DMG:                                 StatusIB =
          [1707924172.241543][42120:42123] CHIP:DMG:                                 {
          [1707924172.241546][42120:42123] CHIP:DMG:                                         status = 0x85 (INVALID_COMMAND),
          [1707924172.241549][42120:42123] CHIP:DMG:                                 },
          [1707924172.241553][42120:42123] CHIP:DMG:
          [1707924172.241555][42120:42123] CHIP:DMG:                         },
          [1707924172.241560][42120:42123] CHIP:DMG:
          [1707924172.241562][42120:42123] CHIP:DMG:                 },
          [1707924172.241567][42120:42123] CHIP:DMG:
          [1707924172.241573][42120:42123] CHIP:DMG:         ],
          [1707924172.241577][42120:42123] CHIP:DMG:
          [1707924172.241579][42120:42123] CHIP:DMG:         InteractionModelRevision = 11
          [1707924172.241582][42120:42123] CHIP:DMG: },"
      disabled: true

    - label:
          "Step 10: TH sends RetrieveLogsRequest Command to DUT that does not
          support BDX : RetrieveLogsRequest(Intent = EndUserSupport,
          RequestedProtocol= BDX, TransferFileDesignator = TH_LOG_OK_NORMAL)"
      PICS: "!MCORE.BDX.Initiator"
      verification: |
          "diagnosticlogs retrieve-logs-request 0 1 1 0 --TransferFileDesignator Length_1234567.txt

          On TH(chip-tool), Verify that the DUT responds with Exhausted(1)  status code for the RetrieveLogsResponse command with the  LogContent field containing at most 1024 bytes

          [1707979121.749537][7593:7596] CHIP:TOO:   RetrieveLogsResponse: {
          [1707979121.749565][7593:7596] CHIP:TOO:     status: 1
          [1707979121.749593][7593:7596] CHIP:TOO:     logContent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}"
      disabled: true

    - label:
          "Step 12: TH sends RetrieveLogsRequest Command to DUT with Invalid
          RequestedProtocol : RetrieveLogsRequest(Intent =
          EndUserSupport,RequestedProtocol= 2, TransferFileDesignator =
          TH_LOG_OK_NORMAL)"
      PICS: MCORE.BDX.Initiator
      verification: |
          "diagnosticlogs retrieve-logs-request 0 2 1 0 --TransferFileDesignator Length_1234567.txt

          On TH(chip-tool), Verify that the DUT responds with INVALID_COMMAND for the RetrieveLogsRequest that was sent Invalid RequestedProtocol(2)

          707901794.468418][36124:36127] CHIP:DMG: InvokeResponseMessage =
          [1707901794.468425][36124:36127] CHIP:DMG: {
          [1707901794.468433][36124:36127] CHIP:DMG:         suppressResponse = false,
          [1707901794.468440][36124:36127] CHIP:DMG:         InvokeResponseIBs =
          [1707901794.468452][36124:36127] CHIP:DMG:         [
          [1707901794.468459][36124:36127] CHIP:DMG:                 InvokeResponseIB =
          [1707901794.468471][36124:36127] CHIP:DMG:                 {
          [1707901794.468477][36124:36127] CHIP:DMG:                         CommandStatusIB =
          [1707901794.468485][36124:36127] CHIP:DMG:                         {
          [1707901794.468492][36124:36127] CHIP:DMG:                                 CommandPathIB =
          [1707901794.468501][36124:36127] CHIP:DMG:                                 {
          [1707901794.468510][36124:36127] CHIP:DMG:                                         EndpointId = 0x0,
          [1707901794.468518][36124:36127] CHIP:DMG:                                         ClusterId = 0x32,
          [1707901794.468526][36124:36127] CHIP:DMG:                                         CommandId = 0x0,
          [1707901794.468533][36124:36127] CHIP:DMG:                                 },
          [1707901794.468545][36124:36127] CHIP:DMG:
          [1707901794.468552][36124:36127] CHIP:DMG:                                 StatusIB =
          [1707901794.468560][36124:36127] CHIP:DMG:                                 {
          [1707901794.468569][36124:36127] CHIP:DMG:                                         status = 0x85 (INVALID_COMMAND),
          [1707901794.468576][36124:36127] CHIP:DMG:                                 },
          [1707901794.468584][36124:36127] CHIP:DMG:
          [1707901794.468591][36124:36127] CHIP:DMG:                         },
          [1707901794.468602][36124:36127] CHIP:DMG:
          [1707901794.468608][36124:36127] CHIP:DMG:                 },
          [1707901794.468619][36124:36127] CHIP:DMG:
          [1707901794.468624][36124:36127] CHIP:DMG:         ],
          [1707901794.468635][36124:36127] CHIP:DMG:"
      disabled: true

    - label:
          "Step 13: TH sends RetrieveLogsRequest Command with Invalid
          TransferFileDesignator length : RetrieveLogsRequest(Intent =
          EndUserSupport,RequestedProtocol= BDX, TransferFileDesignator =
          TH_LOG_ERROR_EMPTY)"
      verification: |
          "diagnosticlogs retrieve-logs-request 0 1 1 0 --TransferFileDesignator ''

          [1707904517.151453][36678:36681] CHIP:DMG: ICR moving to [ResponseRe]
          [1707904517.151489][36678:36681] CHIP:DMG: InvokeResponseMessage =
          [1707904517.151501][36678:36681] CHIP:DMG: {
          [1707904517.151511][36678:36681] CHIP:DMG:         suppressResponse = false,
          [1707904517.151522][36678:36681] CHIP:DMG:         InvokeResponseIBs =
          [1707904517.151541][36678:36681] CHIP:DMG:         [
          [1707904517.151548][36678:36681] CHIP:DMG:                 InvokeResponseIB =
          [1707904517.151565][36678:36681] CHIP:DMG:                 {
          [1707904517.151573][36678:36681] CHIP:DMG:                         CommandStatusIB =
          [1707904517.151582][36678:36681] CHIP:DMG:                         {
          [1707904517.151590][36678:36681] CHIP:DMG:                                 CommandPathIB =
          [1707904517.151599][36678:36681] CHIP:DMG:                                 {
          [1707904517.151613][36678:36681] CHIP:DMG:                                         EndpointId = 0x0,
          [1707904517.151627][36678:36681] CHIP:DMG:                                         ClusterId = 0x32,
          [1707904517.151640][36678:36681] CHIP:DMG:                                         CommandId = 0x0,
          [1707904517.151652][36678:36681] CHIP:DMG:                                 },
          [1707904517.151670][36678:36681] CHIP:DMG:
          [1707904517.151681][36678:36681] CHIP:DMG:                                 StatusIB =
          [1707904517.151696][36678:36681] CHIP:DMG:                                 {
          [1707904517.151708][36678:36681] CHIP:DMG:                                         status = 0x87 (CONSTRAINT_ERROR),
          [1707904517.151720][36678:36681] CHIP:DMG:                                 },
          [1707904517.151734][36678:36681] CHIP:DMG:
          [1707904517.151745][36678:36681] CHIP:DMG:                         },
          [1707904517.151763][36678:36681] CHIP:DMG:
          [1707904517.151772][36678:36681] CHIP:DMG:                 },
          [1707904517.151790][36678:36681] CHIP:DMG:
          [1707904517.151798][36678:36681] CHIP:DMG:         ],
          [1707904517.151816][36678:36681] CHIP:DMG:
          [1707904517.151824][36678:36681] CHIP:DMG:         InteractionModelRevision = 11
          [1707904517.151830][36678:36681] CHIP:DMG: },"
      disabled: true

    - label:
          "Step 14: TH sends RetrieveLogsRequest Command to DUT with Invalid
          TransferFileDesignator length : RetrieveLogsRequest(Intent =
          EndUserSupport,RequestedProtocol= BDX, TransferFileDesignator =
          TH_LOG_BAD_LENGTH)"
      verification: |
          "diagnosticlogs retrieve-logs-request 0 1 1 0 --TransferFileDesignator Length_1234567891234567891234567891212345.txt

          On TH(chip-tool), Verify that the DUT responds with CONSTRAINT_ERRORfor the RetrieveLogsRequest that was sent Invalid Invalid TransferFileDesignator length(> 32)

          [1707904517.151453][36678:36681] CHIP:DMG: ICR moving to [ResponseRe]
          [1707904517.151489][36678:36681] CHIP:DMG: InvokeResponseMessage =
          [1707904517.151501][36678:36681] CHIP:DMG: {
          [1707904517.151511][36678:36681] CHIP:DMG:         suppressResponse = false,
          [1707904517.151522][36678:36681] CHIP:DMG:         InvokeResponseIBs =
          [1707904517.151541][36678:36681] CHIP:DMG:         [
          [1707904517.151548][36678:36681] CHIP:DMG:                 InvokeResponseIB =
          [1707904517.151565][36678:36681] CHIP:DMG:                 {
          [1707904517.151573][36678:36681] CHIP:DMG:                         CommandStatusIB =
          [1707904517.151582][36678:36681] CHIP:DMG:                         {
          [1707904517.151590][36678:36681] CHIP:DMG:                                 CommandPathIB =
          [1707904517.151599][36678:36681] CHIP:DMG:                                 {
          [1707904517.151613][36678:36681] CHIP:DMG:                                         EndpointId = 0x0,
          [1707904517.151627][36678:36681] CHIP:DMG:                                         ClusterId = 0x32,
          [1707904517.151640][36678:36681] CHIP:DMG:                                         CommandId = 0x0,
          [1707904517.151652][36678:36681] CHIP:DMG:                                 },
          [1707904517.151670][36678:36681] CHIP:DMG:
          [1707904517.151681][36678:36681] CHIP:DMG:                                 StatusIB =
          [1707904517.151696][36678:36681] CHIP:DMG:                                 {
          [1707904517.151708][36678:36681] CHIP:DMG:                                         status = 0x87 (CONSTRAINT_ERROR),
          [1707904517.151720][36678:36681] CHIP:DMG:                                 },
          [1707904517.151734][36678:36681] CHIP:DMG:
          [1707904517.151745][36678:36681] CHIP:DMG:                         },
          [1707904517.151763][36678:36681] CHIP:DMG:
          [1707904517.151772][36678:36681] CHIP:DMG:                 },
          [1707904517.151790][36678:36681] CHIP:DMG:
          [1707904517.151798][36678:36681] CHIP:DMG:         ],
          [1707904517.151816][36678:36681] CHIP:DMG:
          [1707904517.151824][36678:36681] CHIP:DMG:         InteractionModelRevision = 11
          [1707904517.151830][36678:36681] CHIP:DMG: },"
      disabled: true