diff --git a/examples/energy-management-app/silabs/.gn b/examples/energy-management-app/silabs/.gn
new file mode 100644
index 0000000..b05216f
--- /dev/null
+++ b/examples/energy-management-app/silabs/.gn
@@ -0,0 +1,29 @@
+# Copyright (c) 2020 Project CHIP Authors
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+import("//build_overrides/build.gni")
+
+# The location of the build configuration file.
+buildconfig = "${build_root}/config/BUILDCONFIG.gn"
+
+# CHIP uses angle bracket includes.
+check_system_includes = true
+
+default_args = {
+  target_cpu = "arm"
+  target_os = "freertos"
+  chip_openthread_ftd = true
+
+  import("//openthread.gni")
+}
diff --git a/examples/energy-management-app/silabs/BUILD.gn b/examples/energy-management-app/silabs/BUILD.gn
new file mode 100644
index 0000000..b51ed59
--- /dev/null
+++ b/examples/energy-management-app/silabs/BUILD.gn
@@ -0,0 +1,251 @@
+# Copyright (c) 2020 Project CHIP Authors
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+import("//build_overrides/build.gni")
+import("//build_overrides/chip.gni")
+import("//build_overrides/efr32_sdk.gni")
+import("//build_overrides/pigweed.gni")
+
+import("${build_root}/config/defaults.gni")
+import("${efr32_sdk_build_root}/silabs_executable.gni")
+
+import("${chip_root}/examples/common/pigweed/pigweed_rpcs.gni")
+import("${chip_root}/src/platform/device.gni")
+import("${chip_root}/third_party/silabs/silabs_board.gni")
+
+if (chip_enable_pw_rpc) {
+  import("//build_overrides/pigweed.gni")
+  import("$dir_pw_build/target_types.gni")
+}
+
+assert(current_os == "freertos")
+
+silabs_project_dir = "${chip_root}/examples/energy-management-app/silabs"
+examples_common_plat_dir = "${chip_root}/examples/platform/silabs"
+
+if (wifi_soc) {
+  import("${chip_root}/third_party/silabs/SiWx917_sdk.gni")
+  examples_plat_dir = "${chip_root}/examples/platform/silabs/SiWx917"
+} else {
+  import("${efr32_sdk_build_root}/efr32_sdk.gni")
+  examples_plat_dir = "${chip_root}/examples/platform/silabs/efr32"
+}
+
+import("${examples_common_plat_dir}/args.gni")
+
+declare_args() {
+  # Dump memory usage at link time.
+  chip_print_memory_usage = false
+}
+
+if (slc_generate) {
+  # Generate Project Specific config (Board, hardware used etc..)
+  print(exec_script("${chip_root}/third_party/silabs/slc_gen/run_slc.py",
+                    [
+                      rebase_path(chip_root),
+                      "${silabs_board}",
+                      "${disable_lcd}",
+                      "${use_wstk_buttons}",
+                      "${use_wstk_leds}",
+                      "${use_external_flash}",
+                      "${silabs_mcu}",
+                      rebase_path(slc_gen_path),
+                    ],
+                    "list lines"))
+}
+
+if (wifi_soc) {
+  siwx917_sdk("sdk") {
+    sources = [
+      "${examples_common_plat_dir}/FreeRTOSConfig.h",
+      "${silabs_project_dir}/include/CHIPProjectConfig.h",
+    ]
+
+    include_dirs = [
+      "${chip_root}/src/platform/silabs/SiWx917",
+      "${silabs_project_dir}/include",
+      "${examples_plat_dir}",
+      "${chip_root}/src/lib",
+      "${examples_common_plat_dir}",
+    ]
+
+    defines = []
+    if (chip_enable_pw_rpc) {
+      defines += [
+        "HAL_VCOM_ENABLE=1",
+        "PW_RPC_ENABLED",
+      ]
+    }
+  }
+} else {
+  efr32_sdk("sdk") {
+    sources = [
+      "${examples_common_plat_dir}/FreeRTOSConfig.h",
+      "${silabs_project_dir}/include/CHIPProjectConfig.h",
+    ]
+
+    include_dirs = [
+      "${chip_root}/src/platform/silabs/efr32",
+      "${silabs_project_dir}/include",
+      "${examples_plat_dir}",
+      "${chip_root}/src/lib",
+      "${examples_common_plat_dir}",
+      "../energy-management-common/include",
+    ]
+
+    if (use_wf200) {
+      # TODO efr32_sdk should not need a header from this location
+      include_dirs += [ "${examples_plat_dir}/wf200" ]
+    }
+
+    if (chip_enable_ble_rs911x) {
+      # TODO efr32_sdk should not need a header from this location
+      include_dirs += [
+        "${examples_plat_dir}/rs911x",
+        "${examples_plat_dir}/rs911x/hal",
+      ]
+    }
+
+    defines = []
+    if (chip_enable_pw_rpc) {
+      defines += [
+        "HAL_VCOM_ENABLE=1",
+        "PW_RPC_ENABLED",
+      ]
+    }
+  }
+}
+silabs_executable("energy-management-app") {
+  output_name = "matter-silabs-energy-management-example.out"
+  include_dirs = [ "include" ]
+  defines = []
+
+  if (silabs_board == "BRD2704A") {
+    defines += [ "SL_STATUS_LED=0" ]
+  }
+
+  sources = [
+    "${chip_root}/examples/energy-management-app/energy-management-common/src/ChargingTargetsMemMgr.cpp",
+    "${chip_root}/examples/energy-management-app/energy-management-common/src/DEMTestEventTriggers.cpp",
+    "${chip_root}/examples/energy-management-app/energy-management-common/src/DeviceEnergyManagementDelegateImpl.cpp",
+    "${chip_root}/examples/energy-management-app/energy-management-common/src/DeviceEnergyManagementManager.cpp",
+    "${chip_root}/examples/energy-management-app/energy-management-common/src/EVSEManufacturerImpl.cpp",
+    "${chip_root}/examples/energy-management-app/energy-management-common/src/ElectricalPowerMeasurementDelegate.cpp",
+    "${chip_root}/examples/energy-management-app/energy-management-common/src/EnergyEvseDelegateImpl.cpp",
+    "${chip_root}/examples/energy-management-app/energy-management-common/src/EnergyEvseEventTriggers.cpp",
+    "${chip_root}/examples/energy-management-app/energy-management-common/src/EnergyEvseMain.cpp",
+    "${chip_root}/examples/energy-management-app/energy-management-common/src/EnergyEvseManager.cpp",
+    "${chip_root}/examples/energy-management-app/energy-management-common/src/EnergyEvseTargetsStore.cpp",
+    "${chip_root}/examples/energy-management-app/energy-management-common/src/EnergyReportingEventTriggers.cpp",
+    "${chip_root}/examples/energy-management-app/energy-management-common/src/EnergyTimeUtils.cpp",
+    "${chip_root}/examples/energy-management-app/energy-management-common/src/FakeReadings.cpp",
+    "${chip_root}/examples/energy-management-app/energy-management-common/src/PowerTopologyDelegate.cpp",
+    "${chip_root}/examples/energy-management-app/energy-management-common/src/device-energy-management-mode.cpp",
+    "${chip_root}/examples/energy-management-app/energy-management-common/src/energy-evse-mode.cpp",
+    "${examples_common_plat_dir}/main.cpp",
+    "src/AppTask.cpp",
+  ]
+
+  deps = [
+    ":sdk",
+    app_data_model,
+  ]
+
+  if (wifi_soc) {
+    deps += [ "${examples_plat_dir}:siwx917-common" ]
+  } else {
+    deps += [ "${examples_plat_dir}:efr32-common" ]
+  }
+
+  if (chip_enable_pw_rpc) {
+    defines += [
+      "PW_RPC_ENABLED",
+      "PW_RPC_ATTRIBUTE_SERVICE=1",
+      "PW_RPC_BUTTON_SERVICE=1",
+      "PW_RPC_DESCRIPTOR_SERVICE=1",
+      "PW_RPC_DEVICE_SERVICE=1",
+      "PW_RPC_LIGHTING_SERVICE=1",
+      "PW_RPC_OTCLI_SERVICE=1",
+      "PW_RPC_THREAD_SERVICE=1",
+      "PW_RPC_TRACING_SERVICE=1",
+    ]
+
+    sources += [
+      "${chip_root}/examples/common/pigweed/RpcService.cpp",
+      "${chip_root}/examples/common/pigweed/efr32/PigweedLoggerMutex.cpp",
+      "${examples_common_plat_dir}/PigweedLogger.cpp",
+      "${examples_common_plat_dir}/Rpc.cpp",
+    ]
+
+    deps += [
+      "$dir_pw_hdlc:rpc_channel_output",
+      "$dir_pw_stream:sys_io_stream",
+      "$dir_pw_trace",
+      "$dir_pw_trace_tokenized",
+      "$dir_pw_trace_tokenized:trace_rpc_service",
+      "${chip_root}/config/efr32/lib/pw_rpc:pw_rpc",
+      "${chip_root}/examples/common/pigweed:attributes_service.nanopb_rpc",
+      "${chip_root}/examples/common/pigweed:button_service.nanopb_rpc",
+      "${chip_root}/examples/common/pigweed:descriptor_service.nanopb_rpc",
+      "${chip_root}/examples/common/pigweed:device_service.nanopb_rpc",
+      "${chip_root}/examples/common/pigweed:lighting_service.nanopb_rpc",
+      "${chip_root}/examples/common/pigweed:ot_cli_service.nanopb_rpc",
+      "${chip_root}/examples/common/pigweed:thread_service.nanopb_rpc",
+    ]
+
+    if (wifi_soc) {
+      deps += [ "${examples_plat_dir}/pw_sys_io:pw_sys_io_siwx917" ]
+    } else {
+      deps += [ "${examples_common_plat_dir}/pw_sys_io:pw_sys_io_silabs" ]
+    }
+
+    deps += pw_build_LINK_DEPS
+
+    include_dirs += [
+      "${chip_root}/examples/common",
+      "${chip_root}/examples/common/pigweed/efr32",
+    ]
+  }
+
+  ldscript = "${examples_common_plat_dir}/ldscripts/${silabs_family}.ld"
+
+  inputs = [ ldscript ]
+
+  ldflags = [ "-T" + rebase_path(ldscript, root_build_dir) ]
+
+  if (chip_print_memory_usage) {
+    ldflags += [
+      "-Wl,--print-memory-usage",
+      "-fstack-usage",
+    ]
+  }
+
+  # WiFi Settings
+  if (chip_enable_wifi) {
+    ldflags += [
+      "-Wl,--defsym",
+      "-Wl,SILABS_WIFI=1",
+    ]
+  }
+
+  output_dir = root_out_dir
+}
+
+group("silabs") {
+  deps = [ ":energy-management-app" ]
+}
+
+group("default") {
+  deps = [ ":silabs" ]
+}
diff --git a/examples/energy-management-app/silabs/README.md b/examples/energy-management-app/silabs/README.md
new file mode 100644
index 0000000..06fc6f5
--- /dev/null
+++ b/examples/energy-management-app/silabs/README.md
@@ -0,0 +1,364 @@
+# Matter EFR32 Energy Management Example
+
+An example showing the use of CHIP on the Silicon Labs EFR32 MG12 and MG24.
+
+<hr>
+
+-   [Matter EFR32 Energy Management Example](#matter-efr32-energy-management-example)
+    -   [Introduction](#introduction)
+    -   [Building](#building)
+    -   [Flashing the Application](#flashing-the-application)
+    -   [Viewing Logging Output](#viewing-logging-output)
+    -   [Running the Complete Example](#running-the-complete-example)
+        -   [Notes](#notes)
+    -   [Running RPC console](#running-rpc-console)
+    -   [Device Tracing](#device-tracing)
+    -   [Memory settings](#memory-settings)
+    -   [OTA Software Update](#ota-software-update)
+    -   [Group Communication (Multicast)](#group-communication-multicast)
+    -   [Building options](#building-options)
+        -   [Disabling logging](#disabling-logging)
+        -   [Debug build / release build](#debug-build--release-build)
+        -   [Disabling LCD](#disabling-lcd)
+        -   [KVS maximum entry count](#kvs-maximum-entry-count)
+
+<hr>
+
+> **NOTE:** Silicon Laboratories now maintains a public matter GitHub repo with
+> frequent releases thoroughly tested and validated. Developers looking to
+> develop matter products with silabs hardware are encouraged to use our latest
+> release with added tools and documentation.
+> [Silabs Matter Github](https://github.com/SiliconLabs/matter/releases)
+
+## Introduction
+
+The EFR32 Energy Management example provides a baseline demonstration of a EVSE
+device, built using Matter and the Silicon Labs gecko SDK. It can be controlled
+by a Chip controller over an Openthread or Wifi network..
+
+The EFR32 device can be commissioned over Bluetooth Low Energy where the device
+and the Chip controller will exchange security information with the Rendez-vous
+procedure. If using Thread, Thread Network credentials are then provided to the
+EFR32 device which will then join the Thread network.
+
+If the LCD is enabled, the LCD on the Silabs WSTK shows a QR Code containing the
+needed commissioning information for the BLE connection and starting the
+Rendez-vous procedure.
+
+The EVSE example is intended to serve both as a means to explore the workings of
+Matter as well as a template for creating real products based on the Silicon
+Labs platform.
+
+## Building
+
+-   Download the
+    [Simplicity Commander](https://www.silabs.com/mcu/programming-options)
+    command line tool, and ensure that `commander` is your shell search path.
+    (For Mac OS X, `commander` is located inside
+    `Commander.app/Contents/MacOS/`.)
+
+-   Download and install a suitable ARM gcc tool chain:
+    [GNU Arm Embedded Toolchain 9-2019-q4-major](https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/gnu-rm/downloads)
+
+-   Install some additional tools (likely already present for CHIP developers):
+
+    -   Linux: `sudo apt-get install git ninja-build`
+
+    -   Mac OS X: `brew install ninja`
+
+-   Supported hardware:
+
+    -   > For the latest supported hardware please refer to the
+        > [Hardware Requirements](https://github.com/SiliconLabs/matter/blob/latest/docs/silabs/general/HARDWARE_REQUIREMENTS.md)
+        > in the Silicon Labs Matter Github Repo
+
+    MG24 boards :
+
+    -   BRD2601B / SLWSTK6000B / Wireless Starter Kit / 2.4GHz@10dBm
+    -   BRD2703A / SLWSTK6000B / Wireless Starter Kit / 2.4GHz@10dBm
+    -   BRD4186A / SLWSTK6006A / Wireless Starter Kit / 2.4GHz@10dBm
+    -   BRD4186C / SLWSTK6006A / Wireless Starter Kit / 2.4GHz@10dBm
+    -   BRD4187A / SLWSTK6006A / Wireless Starter Kit / 2.4GHz@20dBm
+    -   BRD4187C / SLWSTK6006A / Wireless Starter Kit / 2.4GHz@20dBm
+    -   BRD2703A / MG24 Explorer Kit
+    -   BRD2704A / SparkFun Thing Plus MGM240P board
+
+*   Build the example application:
+
+          cd ~/connectedhomeip
+          ./scripts/examples/gn_silabs_example.sh ./examples/energy-management-app/silabs/ ./out/energy-management-app BRD4187C
+
+-   To delete generated executable, libraries and object files use:
+
+          $ cd ~/connectedhomeip
+          $ rm -rf ./out/
+
+    OR use GN/Ninja directly
+
+          $ cd ~/connectedhomeip/examples/energy-management-app/silabs
+          $ git submodule update --init
+          $ source third_party/connectedhomeip/scripts/activate.sh
+          $ export SILABS_BOARD=BRD4187C
+          $ gn gen out/debug
+          $ ninja -C out/debug
+
+-   To delete generated executable, libraries and object files use:
+
+          $ cd ~/connectedhomeip/examples/energy-management-app/silabs
+          $ rm -rf out/
+
+*   Build the example as Intermittently Connected Device (ICD)
+
+          $ ./scripts/examples/gn_silabs_example.sh ./examples/energy-management-app/silabs/ ./out/energy-management-app_ICD BRD4187C --icd
+
+    or use gn as previously mentioned but adding the following arguments:
+
+          $ gn gen out/debug '--args=SILABS_BOARD="BRD4187C" enable_sleepy_device=true chip_openthread_ftd=false'
+
+*   Build the example with pigweed RPC
+
+          $ ./scripts/examples/gn_silabs_example.sh examples/energy-management-app/silabs/ out/energy_management_app_rpc BRD4187C 'import("//with_pw_rpc.gni")'
+
+    or use GN/Ninja Directly
+
+          $ cd ~/connectedhomeip/examples/energy-management-app/silabs
+          $ git submodule update --init
+          $ source third_party/connectedhomeip/scripts/activate.sh
+          $ export SILABS_BOARD=BRD4187C
+          $ gn gen out/debug --args='import("//with_pw_rpc.gni")'
+          $ ninja -C out/debug
+
+    [Running Pigweed RPC console](#running-rpc-console)
+
+For more build options, help is provided when running the build script without
+arguments
+
+         ./scripts/examples/gn_silabs_example.sh
+
+## Flashing the Application
+
+-   On the command line:
+
+          $ cd ~/connectedhomeip/examples/energy-management-app/silabs
+          $ python3 out/debug/matter-silabs-energy-management-example.flash.py
+
+-   Or with the Ozone debugger, just load the .out file.
+
+All EFR32 boards require a bootloader, see Silicon Labs documentation for more
+info. Pre-built bootloader binaries are available in the Assets section of the
+Releases page on
+[Silabs Matter Github](https://github.com/SiliconLabs/matter/releases) .
+
+## Viewing Logging Output
+
+The example application is built to use the SEGGER Real Time Transfer (RTT)
+facility for log output. RTT is a feature built-in to the J-Link Interface MCU
+on the WSTK development board. It allows bi-directional communication with an
+embedded application without the need for a dedicated UART.
+
+Using the RTT facility requires downloading and installing the _SEGGER J-Link
+Software and Documentation Pack_
+([web site](https://www.segger.com/downloads/jlink#J-LinkSoftwareAndDocumentationPack)).
+
+Alternatively, SEGGER Ozone J-Link debugger can be used to view RTT logs too
+after flashing the .out file.
+
+-   Download the J-Link installer by navigating to the appropriate URL and
+    agreeing to the license agreement.
+
+-   [JLink_Linux_x86_64.deb](https://www.segger.com/downloads/jlink/JLink_Linux_x86_64.deb)
+-   [JLink_MacOSX.pkg](https://www.segger.com/downloads/jlink/JLink_MacOSX.pkg)
+
+*   Install the J-Link software
+
+          $ cd ~/Downloads
+          $ sudo dpkg -i JLink_Linux_V*_x86_64.deb
+
+*   In Linux, grant the logged in user the ability to talk to the development
+    hardware via the linux tty device (/dev/ttyACMx) by adding them to the
+    dialout group.
+
+          $ sudo usermod -a -G dialout ${USER}
+
+Once the above is complete, log output can be viewed using the JLinkExe tool in
+combination with JLinkRTTClient as follows:
+
+-   Run the JLinkExe tool with arguments to autoconnect to the WSTK board:
+
+    For MG12 use:
+
+          $ JLinkExe -device EFR32MG12PXXXF1024 -if JTAG -speed 4000 -autoconnect 1
+
+    For MG21 use:
+
+          $ JLinkExe -device EFR32MG21AXXXF1024 -if SWD -speed 4000 -autoconnect 1
+
+-   In a second terminal, run the JLinkRTTClient to view logs:
+
+          $ JLinkRTTClient
+
+## Running the Complete Example
+
+-   It is assumed here that you already have an OpenThread border router
+    configured and running. If not see the following guide
+    [Openthread_border_router](https://github.com/project-chip/connectedhomeip/blob/master/docs/guides/openthread_border_router_pi.md)
+    for more information on how to setup a border router on a raspberryPi.
+
+    Take note that the RCP code is available directly through
+    [Simplicity Studio 5](https://www.silabs.com/products/development-tools/software/simplicity-studio/simplicity-studio-5)
+    under File->New->Project Wizard->Examples->Thread : ot-rcp
+
+-   User interface : **LCD** The LCD on Silabs WSTK shows a QR Code. This QR
+    Code is be scanned by the CHIP Tool app For the Rendez-vous procedure over
+    BLE
+
+        * On devices that do not have or support the LCD Display like the BRD4166A Thunderboard Sense 2,
+          a URL can be found in the RTT logs.
+
+          <info  > [SVR] Copy/paste the below URL in a browser to see the QR Code:
+          <info  > [SVR] https://project-chip.github.io/connectedhomeip/qrcode.html?data=CH%3AI34NM%20-00%200C9SS0
+
+    **LED 0** shows the overall state of the device and its connectivity. The
+    following states are possible:
+
+        -   _Short Flash On (50 ms on/950 ms off)_ ; The device is in the
+            unprovisioned (unpaired) state and is waiting for a commissioning
+            application to connect.
+
+        -   _Rapid Even Flashing_ ; (100 ms on/100 ms off)_ &mdash; The device is in the
+            unprovisioned state and a commissioning application is connected through
+            Bluetooth LE.
+
+        -   _Short Flash Off_ ; (950ms on/50ms off)_ &mdash; The device is fully
+            provisioned, but does not yet have full Thread network or service
+            connectivity.
+
+        -   _Solid On_ ; The device is fully provisioned and has full Thread
+            network and service connectivity.
+
+    **Push Button 0**
+
+        -   _Press and Release_ : Start, or restart, BLE advertisement in fast mode. It will advertise in this mode
+            for 30 seconds. The device will then switch to a slower interval advertisement.
+            After 15 minutes, the advertisement stops.
+
+        -   _Pressed and hold for 6 s_ : Initiates the factory reset of the device.
+            Releasing the button within the 6-second window cancels the factory reset
+            procedure. **LEDs** blink in unison when the factory reset procedure is
+            initiated.
+
+*   You can provision and control the Chip device using the python controller,
+    Chip tool standalone, Android or iOS app
+
+*   You can provision and control the Chip device using the python controller,
+    Chip tool standalone, Android or iOS app
+
+    [CHIPTool](https://github.com/project-chip/connectedhomeip/blob/master/examples/chip-tool/README.md)
+
+    Here is an example with the chip-tool:
+
+          $ chip-tool pairing ble-thread 1 hex:<operationalDataset> 20202021 3840
+
+### Notes
+
+-   Depending on your network settings your router might not provide native ipv6
+    addresses to your devices (Border router / PC). If this is the case, you
+    need to add a static ipv6 addresses on both device and then an ipv6 route to
+    the border router on your PC
+
+    -   On Border Router: `sudo ip addr add dev <Network interface> 2002::2/64`
+
+    -   On PC(Linux): `sudo ip addr add dev <Network interface> 2002::1/64`
+
+    -   Add Ipv6 route on PC(Linux)
+        `sudo ip route add <Thread global ipv6 prefix>/64 via 2002::2`
+
+## Running RPC console
+
+-   As part of building the example with RPCs enabled the chip_rpc python
+    interactive console is installed into your venv. The python wheel files are
+    also created in the output folder: out/debug/chip_rpc_console_wheels. To
+    install the wheel files without rebuilding:
+    `pip3 install out/debug/chip_rpc_console_wheels/*.whl`
+
+-   To use the chip-rpc console after it has been installed run:
+    `chip-console --device /dev/tty.<SERIALDEVICE> -b 115200 -o /<YourFolder>/pw_log.out`
+
+-   Then you can simulate a button press or release using the following command
+    where : idx = 0 or 1 for Button PB0 or PB1 action = 0 for PRESSED, 1 for
+    RELEASE Test toggling the LED with
+    `rpcs.chip.rpc.Button.Event(idx=1, pushed=True)`
+
+## Device Tracing
+
+Device tracing is available to analyze the device performance. To turn on
+tracing, build with RPC enabled. See Build the example with pigweed RPC.
+
+Obtain tracing json file.
+
+    $ ./{PIGWEED_REPO}/pw_trace_tokenized/py/pw_trace_tokenized/get_trace.py -d {PORT} -o {OUTPUT_FILE} \
+    -t {ELF_FILE} {PIGWEED_REPO}/pw_trace_tokenized/pw_trace_protos/trace_rpc.proto
+
+## Memory settings
+
+While most of the RAM usage in CHIP is static, allowing easier debugging and
+optimization with symbols analysis, we still need some HEAP for the crypto and
+OpenThread. Size of the HEAP can be modified by changing the value of the
+`configTOTAL_HEAP_SIZE` define inside of the FreeRTOSConfig.h file of this
+example. Please take note that a HEAP size smaller than 13k can and will cause a
+Mbedtls failure during the BLE rendez-vous or CASE session
+
+To track memory usage you can set `enable_heap_monitoring = true` either in the
+BUILD.gn file or pass it as a build argument to gn. This will print on the RTT
+console the RAM usage of each individual task and the number of Memory
+allocation and Free. While this is not extensive monitoring you're welcome to
+modify `examples/platform/silabs/MemMonitoring.cpp` to add your own memory
+tracking code inside the `trackAlloc` and `trackFree` function
+
+## OTA Software Update
+
+For the description of Software Update process with EFR32 example applications
+see
+[EFR32 OTA Software Update](../../../docs/guides/silabs_efr32_software_update.md)
+
+## Group Communication (Multicast)
+
+With this Energy Management example you can also use group communication to send
+Energy Management commands to multiples devices at once. Please refer to the
+[chip-tool documentation](../../chip-tool/README.md) _Configuring the server
+side for Group Commands_ and _Using the Client to Send Group (Multicast) Matter
+Commands_
+
+## Building options
+
+All of Silabs's examples within the Matter repo have all the features enabled by
+default, as to provide the best end user experience. However some of those
+features can easily be toggled on or off. Here is a short list of options to be
+passed to the build scripts.
+
+### Disabling logging
+
+`chip_progress_logging, chip_detail_logging, chip_automation_logging`
+
+    $ ./scripts/examples/gn_silabs_example.sh ./examples/energy-management-app/silabs ./out/energy-management-app BRD4164A "chip_detail_logging=false chip_automation_logging=false chip_progress_logging=false"
+
+### Debug build / release build
+
+`is_debug`
+
+    $ ./scripts/examples/gn_silabs_example.sh ./examples/energy-management-app/silabs ./out/energy-management-app BRD4164A "is_debug=false"
+
+### Disabling LCD
+
+`show_qr_code`
+
+    $ ./scripts/examples/gn_silabs_example.sh ./examples/energy-management-app/silabs ./out/energy-management-app BRD4164A "show_qr_code=false"
+
+### KVS maximum entry count
+
+`kvs_max_entries`
+
+    Set the maximum Kvs entries that can be stored in NVM (Default 75)
+    Thresholds: 30 <= kvs_max_entries <= 255
+
+    $ ./scripts/examples/gn_silabs_example.sh ./examples/energy-management-app/silabs ./out/energy-management-app BRD4164A kvs_max_entries=50
diff --git a/examples/energy-management-app/silabs/build_for_wifi_args.gni b/examples/energy-management-app/silabs/build_for_wifi_args.gni
new file mode 100644
index 0000000..bfded90
--- /dev/null
+++ b/examples/energy-management-app/silabs/build_for_wifi_args.gni
@@ -0,0 +1,24 @@
+# Copyright (c) 2020 Project CHIP Authors
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+import("//build_overrides/chip.gni")
+import("${chip_root}/config/standalone/args.gni")
+
+silabs_sdk_target = get_label_info(":sdk", "label_no_toolchain")
+chip_enable_openthread = false
+import("${chip_root}/src/platform/silabs/wifi_args.gni")
+
+chip_enable_ota_requestor = false
+disable_lcd = true
+app_data_model =
+    "${chip_root}/examples/energy-management-app/energy-management-common"
diff --git a/examples/energy-management-app/silabs/build_for_wifi_gnfile.gn b/examples/energy-management-app/silabs/build_for_wifi_gnfile.gn
new file mode 100644
index 0000000..d391814
--- /dev/null
+++ b/examples/energy-management-app/silabs/build_for_wifi_gnfile.gn
@@ -0,0 +1,28 @@
+# Copyright (c) 2020 Project CHIP Authors
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+import("//build_overrides/build.gni")
+
+# The location of the build configuration file.
+buildconfig = "${build_root}/config/BUILDCONFIG.gn"
+
+# CHIP uses angle bracket includes.
+check_system_includes = true
+
+default_args = {
+  target_cpu = "arm"
+  target_os = "freertos"
+  chip_enable_wifi = true
+  import("//build_for_wifi_args.gni")
+}
diff --git a/examples/energy-management-app/silabs/build_overrides b/examples/energy-management-app/silabs/build_overrides
new file mode 120000
index 0000000..e578e73
--- /dev/null
+++ b/examples/energy-management-app/silabs/build_overrides
@@ -0,0 +1 @@
+../../build_overrides
\ No newline at end of file
diff --git a/examples/energy-management-app/silabs/include/AppConfig.h b/examples/energy-management-app/silabs/include/AppConfig.h
new file mode 100644
index 0000000..bbd4d20
--- /dev/null
+++ b/examples/energy-management-app/silabs/include/AppConfig.h
@@ -0,0 +1,28 @@
+/*
+ *
+ *    Copyright (c) 2020 Project CHIP Authors
+ *    Copyright (c) 2019 Google LLC.
+ *    All rights reserved.
+ *
+ *    Licensed under the Apache License, Version 2.0 (the "License");
+ *    you may not use this file except in compliance with the License.
+ *    You may obtain a copy of the License at
+ *
+ *        http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *    Unless required by applicable law or agreed to in writing, software
+ *    distributed under the License is distributed on an "AS IS" BASIS,
+ *    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *    See the License for the specific language governing permissions and
+ *    limitations under the License.
+ */
+
+#pragma once
+
+#include "silabs_utils.h"
+
+// ---- EVSE Example App Config ----
+
+#define APP_TASK_NAME "EVSE"
+
+#define BLE_DEV_NAME "SiLabs-EVSE"
diff --git a/examples/energy-management-app/silabs/include/AppEvent.h b/examples/energy-management-app/silabs/include/AppEvent.h
new file mode 100644
index 0000000..7f28962
--- /dev/null
+++ b/examples/energy-management-app/silabs/include/AppEvent.h
@@ -0,0 +1,54 @@
+/*
+ *
+ *    Copyright (c) 2020 Project CHIP Authors
+ *    Copyright (c) 2018 Nest Labs, Inc.
+ *    All rights reserved.
+ *
+ *    Licensed under the Apache License, Version 2.0 (the "License");
+ *    you may not use this file except in compliance with the License.
+ *    You may obtain a copy of the License at
+ *
+ *        http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *    Unless required by applicable law or agreed to in writing, software
+ *    distributed under the License is distributed on an "AS IS" BASIS,
+ *    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *    See the License for the specific language governing permissions and
+ *    limitations under the License.
+ */
+
+#pragma once
+
+struct AppEvent;
+typedef void (*EventHandler)(AppEvent *);
+
+struct AppEvent
+{
+    enum AppEventTypes
+    {
+        kEventType_Button = 0,
+        kEventType_Timer,
+        kEventType_Install,
+    };
+
+    uint16_t Type;
+
+    union
+    {
+        struct
+        {
+            uint8_t Action;
+        } ButtonEvent;
+        struct
+        {
+            void * Context;
+        } TimerEvent;
+        struct
+        {
+            uint8_t Action;
+            int32_t Actor;
+        } EvseEvent;
+    };
+
+    EventHandler Handler;
+};
diff --git a/examples/energy-management-app/silabs/include/AppTask.h b/examples/energy-management-app/silabs/include/AppTask.h
new file mode 100644
index 0000000..9911461
--- /dev/null
+++ b/examples/energy-management-app/silabs/include/AppTask.h
@@ -0,0 +1,110 @@
+/*
+ *
+ *    Copyright (c) 2020 Project CHIP Authors
+ *    Copyright (c) 2019 Google LLC.
+ *    All rights reserved.
+ *
+ *    Licensed under the Apache License, Version 2.0 (the "License");
+ *    you may not use this file except in compliance with the License.
+ *    You may obtain a copy of the License at
+ *
+ *        http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *    Unless required by applicable law or agreed to in writing, software
+ *    distributed under the License is distributed on an "AS IS" BASIS,
+ *    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *    See the License for the specific language governing permissions and
+ *    limitations under the License.
+ */
+
+#pragma once
+
+/**********************************************************
+ * Includes
+ *********************************************************/
+
+#include <stdbool.h>
+#include <stdint.h>
+
+#include "AppEvent.h"
+#include "BaseApplication.h"
+#include "EnergyEvseManager.h"
+#include "FreeRTOS.h"
+#include "timers.h" // provides FreeRTOS timer support
+#include <ble/BLEEndPoint.h>
+#include <lib/core/CHIPError.h>
+#include <platform/CHIPDeviceLayer.h>
+
+/**********************************************************
+ * Defines
+ *********************************************************/
+
+// Application-defined error codes in the CHIP_ERROR space.
+#define APP_ERROR_EVENT_QUEUE_FAILED CHIP_APPLICATION_ERROR(0x01)
+#define APP_ERROR_CREATE_TASK_FAILED CHIP_APPLICATION_ERROR(0x02)
+#define APP_ERROR_UNHANDLED_EVENT CHIP_APPLICATION_ERROR(0x03)
+#define APP_ERROR_CREATE_TIMER_FAILED CHIP_APPLICATION_ERROR(0x04)
+#define APP_ERROR_START_TIMER_FAILED CHIP_APPLICATION_ERROR(0x05)
+#define APP_ERROR_STOP_TIMER_FAILED CHIP_APPLICATION_ERROR(0x06)
+
+/**********************************************************
+ * AppTask Declaration
+ *********************************************************/
+
+class AppTask : public BaseApplication
+{
+
+public:
+    AppTask() = default;
+
+    static AppTask & GetAppTask() { return sAppTask; }
+
+    /**
+     * @brief AppTask task main loop function
+     *
+     * @param pvParameter FreeRTOS task parameter
+     */
+    static void AppTaskMain(void * pvParameter);
+
+    CHIP_ERROR StartAppTask();
+
+    /**
+     * @brief Event handler when a button is pressed
+     * Function posts an event for button processing
+     *
+     * @param buttonHandle APP_FUNCTION_BUTTON
+     * @param btnAction button action - SL_SIMPLE_BUTTON_PRESSED,
+     *                  SL_SIMPLE_BUTTON_RELEASED or SL_SIMPLE_BUTTON_DISABLED
+     */
+    static void ButtonEventHandler(uint8_t button, uint8_t btnAction);
+
+private:
+    static AppTask sAppTask;
+    static void EvseActionEventHandler(AppEvent * aEvent);
+
+    static void UpdateClusterState(intptr_t context);
+
+    /**
+     * @brief AppTask initialisation function
+     *
+     * @return CHIP_ERROR
+     */
+    CHIP_ERROR Init();
+
+    /**
+     * @brief PB0 Button event processing function
+     *        Press and hold will trigger a factory reset timer start
+     *        Press and release will restart BLEAdvertising if not commisionned
+     *
+     * @param aEvent button event being processed
+     */
+    static void ButtonHandler(AppEvent * aEvent);
+
+    /**
+     * @brief PB1 Button event processing function
+     *        Function triggers a switch action sent to the CHIP task
+     *
+     * @param aEvent button event being processed
+     */
+    static void SwitchActionEventHandler(AppEvent * aEvent);
+};
diff --git a/examples/energy-management-app/silabs/include/CHIPProjectConfig.h b/examples/energy-management-app/silabs/include/CHIPProjectConfig.h
new file mode 100644
index 0000000..62943f4
--- /dev/null
+++ b/examples/energy-management-app/silabs/include/CHIPProjectConfig.h
@@ -0,0 +1,102 @@
+/*
+ *
+ *    Copyright (c) 2020 Project CHIP Authors
+ *    Copyright (c) 2019 Google LLC.
+ *    All rights reserved.
+ *
+ *    Licensed under the Apache License, Version 2.0 (the "License");
+ *    you may not use this file except in compliance with the License.
+ *    You may obtain a copy of the License at
+ *
+ *        http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *    Unless required by applicable law or agreed to in writing, software
+ *    distributed under the License is distributed on an "AS IS" BASIS,
+ *    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *    See the License for the specific language governing permissions and
+ *    limitations under the License.
+ */
+
+/**
+ *    @file
+ *          Example project configuration file for CHIP.
+ *
+ *          This is a place to put application or project-specific overrides
+ *          to the default configuration values for general CHIP features.
+ *
+ */
+
+#pragma once
+
+// Use a default pairing code if one hasn't been provisioned in flash.
+#ifndef CHIP_DEVICE_CONFIG_USE_TEST_SETUP_PIN_CODE
+#define CHIP_DEVICE_CONFIG_USE_TEST_SETUP_PIN_CODE 20202021
+#endif
+
+#ifndef CHIP_DEVICE_CONFIG_USE_TEST_SETUP_DISCRIMINATOR
+#define CHIP_DEVICE_CONFIG_USE_TEST_SETUP_DISCRIMINATOR 0xF00
+#endif
+
+// For convenience, Chip Security Test Mode can be enabled and the
+// requirement for authentication in various protocols can be disabled.
+//
+//    WARNING: These options make it possible to circumvent basic Chip security functionality,
+//    including message encryption. Because of this they MUST NEVER BE ENABLED IN PRODUCTION BUILDS.
+//
+#define CHIP_CONFIG_SECURITY_TEST_MODE 0
+
+/**
+ * CHIP_DEVICE_CONFIG_DEVICE_VENDOR_ID
+ *
+ * 0xFFF1: Test vendor
+ */
+#define CHIP_DEVICE_CONFIG_DEVICE_VENDOR_ID 0xFFF1
+
+/**
+ * CHIP_DEVICE_CONFIG_DEVICE_PRODUCT_ID
+ *
+ * 0x8005: example EVSE app
+ */
+#define CHIP_DEVICE_CONFIG_DEVICE_PRODUCT_ID 0x8005
+
+/**
+ * CHIP_DEVICE_CONFIG_ENABLE_CHIPOBLE
+ *
+ * Enable support for Chip-over-BLE (CHIPoBLE).
+ */
+#define CHIP_DEVICE_CONFIG_ENABLE_CHIPOBLE 1
+
+/**
+ * CHIP_DEVICE_CONFIG_TEST_SERIAL_NUMBER
+ *
+ * Enables the use of a hard-coded default serial number if none
+ * is found in Chip NV storage.
+ */
+#define CHIP_DEVICE_CONFIG_TEST_SERIAL_NUMBER "TEST_SN"
+
+/**
+ * CHIP_DEVICE_CONFIG_EVENT_LOGGING_UTC_TIMESTAMPS
+ *
+ * Enable recording UTC timestamps.
+ */
+#define CHIP_DEVICE_CONFIG_EVENT_LOGGING_UTC_TIMESTAMPS 1
+
+/**
+ * CHIP_DEVICE_CONFIG_EVENT_LOGGING_DEBUG_BUFFER_SIZE
+ *
+ * A size, in bytes, of the individual debug event logging buffer.
+ */
+#define CHIP_DEVICE_CONFIG_EVENT_LOGGING_DEBUG_BUFFER_SIZE (512)
+
+/**
+ *  @def CHIP_CONFIG_MRP_LOCAL_ACTIVE_RETRY_INTERVAL
+ *
+ *  @brief
+ *    Active retransmit interval, or time to wait before retransmission after
+ *    subsequent failures in milliseconds.
+ *
+ *  This is the default value, that might be adjusted by end device depending on its
+ *  needs (e.g. sleeping period) using Service Discovery TXT record CRA key.
+ *
+ */
+#define CHIP_CONFIG_MRP_LOCAL_ACTIVE_RETRY_INTERVAL (2000_ms32)
diff --git a/examples/energy-management-app/silabs/openthread.gn b/examples/energy-management-app/silabs/openthread.gn
new file mode 100644
index 0000000..b05216f
--- /dev/null
+++ b/examples/energy-management-app/silabs/openthread.gn
@@ -0,0 +1,29 @@
+# Copyright (c) 2020 Project CHIP Authors
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+import("//build_overrides/build.gni")
+
+# The location of the build configuration file.
+buildconfig = "${build_root}/config/BUILDCONFIG.gn"
+
+# CHIP uses angle bracket includes.
+check_system_includes = true
+
+default_args = {
+  target_cpu = "arm"
+  target_os = "freertos"
+  chip_openthread_ftd = true
+
+  import("//openthread.gni")
+}
diff --git a/examples/energy-management-app/silabs/openthread.gni b/examples/energy-management-app/silabs/openthread.gni
new file mode 100644
index 0000000..2813a5a
--- /dev/null
+++ b/examples/energy-management-app/silabs/openthread.gni
@@ -0,0 +1,28 @@
+# Copyright (c) 2020 Project CHIP Authors
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+import("//build_overrides/chip.gni")
+import("${chip_root}/config/standalone/args.gni")
+import("${chip_root}/src/platform/silabs/efr32/args.gni")
+
+silabs_sdk_target = get_label_info(":sdk", "label_no_toolchain")
+
+app_data_model =
+    "${chip_root}/examples/energy-management-app/energy-management-common"
+chip_enable_ota_requestor = false
+chip_enable_openthread = true
+disable_lcd = true
+
+openthread_external_platform =
+    "${chip_root}/third_party/openthread/platforms/efr32:libopenthread-efr32"
diff --git a/examples/energy-management-app/silabs/src/AppTask.cpp b/examples/energy-management-app/silabs/src/AppTask.cpp
new file mode 100644
index 0000000..4ed73ef
--- /dev/null
+++ b/examples/energy-management-app/silabs/src/AppTask.cpp
@@ -0,0 +1,212 @@
+/*
+ *
+ *    Copyright (c) 2020 Project CHIP Authors
+ *    Copyright (c) 2019 Google LLC.
+ *    All rights reserved.
+ *
+ *    Licensed under the Apache License, Version 2.0 (the "License");
+ *    you may not use this file except in compliance with the License.
+ *    You may obtain a copy of the License at
+ *
+ *        http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *    Unless required by applicable law or agreed to in writing, software
+ *    distributed under the License is distributed on an "AS IS" BASIS,
+ *    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *    See the License for the specific language governing permissions and
+ *    limitations under the License.
+ */
+
+#include "AppTask.h"
+#include "AppConfig.h"
+#include "AppEvent.h"
+#include "LEDWidget.h"
+#include <EnergyEvseMain.h>
+#include <app-common/zap-generated/cluster-enums.h>
+#include <app-common/zap-generated/cluster-objects.h>
+#include <app-common/zap-generated/ids/Attributes.h>
+#include <app-common/zap-generated/ids/Clusters.h>
+#include <app/ConcreteAttributePath.h>
+#include <app/clusters/network-commissioning/network-commissioning.h>
+#include <app/server/OnboardingCodesUtil.h>
+#include <app/server/Server.h>
+#include <app/util/attribute-storage.h>
+#include <assert.h>
+#include <lib/support/BitMask.h>
+
+#include <platform/silabs/platformAbstraction/SilabsPlatform.h>
+
+#include <setup_payload/QRCodeSetupPayloadGenerator.h>
+#include <setup_payload/SetupPayload.h>
+
+#include <lib/support/CodeUtils.h>
+
+#include <platform/CHIPDeviceLayer.h>
+
+#if (defined(SL_CATALOG_SIMPLE_LED_LED1_PRESENT) || defined(SIWX_917))
+#define EVSE_LED 1
+#else
+#define EVSE_LED 0
+#endif
+
+#define APP_FUNCTION_BUTTON 0
+#define APP_EVSE_SWITCH 1
+
+namespace {
+LEDWidget sEvseLED;
+}
+
+using namespace chip;
+using namespace chip::app;
+using namespace chip::app::Clusters;
+using namespace chip::app::Clusters::DeviceEnergyManagement;
+using namespace chip::app::Clusters::DeviceEnergyManagement::Attributes;
+using namespace ::chip::DeviceLayer;
+using namespace ::chip::DeviceLayer::Silabs;
+using namespace ::chip::DeviceLayer::Internal;
+using namespace chip::TLV;
+
+namespace chip {
+namespace app {
+namespace Clusters {
+namespace DeviceEnergyManagement {
+
+// Keep track of the parsed featureMap option
+static chip::BitMask<Feature> sFeatureMap(Feature::kPowerAdjustment, Feature::kPowerForecastReporting,
+                                          Feature::kStateForecastReporting, Feature::kStartTimeAdjustment, Feature::kPausable,
+                                          Feature::kForecastAdjustment, Feature::kConstraintBasedAdjustment);
+
+chip::BitMask<Feature> GetFeatureMapFromCmdLine()
+{
+    return sFeatureMap;
+}
+
+} // namespace DeviceEnergyManagement
+} // namespace Clusters
+} // namespace app
+} // namespace chip
+
+AppTask AppTask::sAppTask;
+
+void ApplicationInit()
+{
+    chip::DeviceLayer::PlatformMgr().LockChipStack();
+    EvseApplicationInit();
+    sEvseLED.Init(EVSE_LED);
+    chip::DeviceLayer::PlatformMgr().UnlockChipStack();
+}
+void ApplicationShutdown()
+{
+    chip::DeviceLayer::PlatformMgr().LockChipStack();
+    EvseApplicationShutdown();
+    chip::DeviceLayer::PlatformMgr().UnlockChipStack();
+}
+
+CHIP_ERROR AppTask::Init()
+{
+    CHIP_ERROR err = CHIP_NO_ERROR;
+    chip::DeviceLayer::Silabs::GetPlatform().SetButtonsCb(AppTask::ButtonEventHandler);
+
+#ifdef DISPLAY_ENABLED
+    GetLCD().Init((uint8_t *) "energy-management-App");
+#endif
+
+    err = BaseApplication::Init();
+    if (err != CHIP_NO_ERROR)
+    {
+        SILABS_LOG("BaseApplication::Init() failed");
+        appError(err);
+    }
+
+    ApplicationInit();
+
+// Update the LCD with the Stored value. Show QR Code if not provisioned
+#ifdef DISPLAY_ENABLED
+    GetLCD().WriteDemoUI(LightMgr().IsLightOn());
+#ifdef QR_CODE_ENABLED
+#ifdef SL_WIFI
+    if (!chip::DeviceLayer::ConnectivityMgr().IsWiFiStationProvisioned())
+#else
+    if (!chip::DeviceLayer::ConnectivityMgr().IsThreadProvisioned())
+#endif /* !SL_WIFI */
+    {
+        GetLCD().ShowQRCode(true);
+    }
+#endif // QR_CODE_ENABLED
+#endif
+
+    return err;
+}
+
+CHIP_ERROR AppTask::StartAppTask()
+{
+    return BaseApplication::StartAppTask(AppTaskMain);
+}
+
+void AppTask::AppTaskMain(void * pvParameter)
+{
+    AppEvent event;
+    osMessageQueueId_t sAppEventQueue = *(static_cast<osMessageQueueId_t *>(pvParameter));
+
+    CHIP_ERROR err = sAppTask.Init();
+    if (err != CHIP_NO_ERROR)
+    {
+        SILABS_LOG("AppTask.Init() failed");
+        appError(err);
+    }
+
+    SILABS_LOG("App Task started");
+
+    while (true)
+    {
+        osStatus_t eventReceived = osMessageQueueGet(sAppEventQueue, &event, NULL, osWaitForever);
+        while (eventReceived == osOK)
+        {
+            sAppTask.DispatchEvent(&event);
+            eventReceived = osMessageQueueGet(sAppEventQueue, &event, NULL, 0);
+        }
+    }
+}
+
+void AppTask::EvseActionEventHandler(AppEvent * aEvent)
+{
+    bool initiated = false;
+    int32_t actor;
+    CHIP_ERROR err = CHIP_NO_ERROR;
+
+    if (aEvent->Type == AppEvent::kEventType_Button)
+    {
+        actor = AppEvent::kEventType_Button;
+        SILABS_LOG("button event %d ", actor);
+    }
+    else
+    {
+        err = APP_ERROR_UNHANDLED_EVENT;
+    }
+
+    if (err == CHIP_NO_ERROR)
+    {
+        if (!initiated)
+        {
+            SILABS_LOG("Action is already in progress or active.");
+        }
+    }
+}
+
+void AppTask::ButtonEventHandler(uint8_t button, uint8_t btnAction)
+{
+    AppEvent button_event           = {};
+    button_event.Type               = AppEvent::kEventType_Button;
+    button_event.ButtonEvent.Action = btnAction;
+
+    if (button == APP_EVSE_SWITCH && btnAction == static_cast<uint8_t>(SilabsPlatform::ButtonAction::ButtonPressed))
+    {
+        button_event.Handler = EvseActionEventHandler;
+        AppTask::GetAppTask().PostEvent(&button_event);
+    }
+    else if (button == APP_FUNCTION_BUTTON)
+    {
+        button_event.Handler = BaseApplication::ButtonHandler;
+        AppTask::GetAppTask().PostEvent(&button_event);
+    }
+}
diff --git a/examples/energy-management-app/silabs/third_party/connectedhomeip b/examples/energy-management-app/silabs/third_party/connectedhomeip
new file mode 120000
index 0000000..c866b86
--- /dev/null
+++ b/examples/energy-management-app/silabs/third_party/connectedhomeip
@@ -0,0 +1 @@
+../../../..
\ No newline at end of file
diff --git a/examples/energy-management-app/silabs/with_pw_rpc.gni b/examples/energy-management-app/silabs/with_pw_rpc.gni
new file mode 100644
index 0000000..ac5d995
--- /dev/null
+++ b/examples/energy-management-app/silabs/with_pw_rpc.gni
@@ -0,0 +1,30 @@
+# Copyright (c) 2021 Project CHIP Authors
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# add this gni as import in your build args to use pigweed in the example
+# 'import("//with_pw_rpc.gni")'
+
+import("//build_overrides/chip.gni")
+import("${chip_root}/config/efr32/lib/pw_rpc/pw_rpc.gni")
+import("${chip_root}/examples/platform/silabs/args.gni")
+
+silabs_sdk_target = get_label_info(":sdk", "label_no_toolchain")
+
+app_data_model =
+    "${chip_root}/examples/energy-management-app/energy-management-common"
+chip_enable_pw_rpc = true
+chip_enable_openthread = true
+
+# Light app on EFR enables tracing server
+pw_trace_BACKEND = "$dir_pw_trace_tokenized"