# Copyright (c) 2021 Project CHIP Authors
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# Auto-generated scripts for harness use only, please review before automation. The endpoints and cluster names are currently set to default

name:
    4.1.2. [TC-CADMIN-1.2] Administrator Behavior using BCM [DUT - Commissioner]

PICS:
    - CADMIN.C
    - CADMIN.C.C01.Tx

config:
    nodeId: 0x12344321
    cluster: "Basic"
    endpoint: 0

tests:
    - label: "Note"
      verification: |
          For DUT as comissioner  test cases, Chip-tool command used below are an example to verify the functionality. For certification test, we expect DUT should have a capability or way to run the equivalent command.
      disabled: true

    - label: "Precondition"
      verification: |
          Reset Devices to factory defaults
      disabled: true

    - label: "TH_CR1 starts a commissioning process with TH_CE"
      PICS: CADMIN.C
      verification: |
          Provision the device using chip tool on first controller
      disabled: true

    - label:
          "TH_CR1 sends command to TH_CE to open a commissioning window with a
          commissioning timeout of PIXIT.CADMIN.CwDuration seconds using BCM
          (Basic Commissioning Method)"
      PICS: CADMIN.C.C01.Tx
      verification: |
          On first controller, usinadministratorcommissioningg chip tool open commissioning window.

          ./chip-tool administratorcommissioning open-basic-commissioning-window 500 1 0 --timedInteractionTimeoutMs 1000


          CHIP:DMG: InvokeResponseMessage =
          [1650278416.248379][11064:11069] CHIP:DMG: {
          [1650278416.248436][11064:11069] CHIP:DMG:         suppressResponse = false,
          [1650278416.248495][11064:11069] CHIP:DMG:         InvokeResponseIBs =
          [1650278416.248570][11064:11069] CHIP:DMG:         [
          [1650278416.248630][11064:11069] CHIP:DMG:                 InvokeResponseIB =
          [1650278416.248718][11064:11069] CHIP:DMG:                 {
          [1650278416.248783][11064:11069] CHIP:DMG:                         CommandStatusIB =
          [1650278416.248860][11064:11069] CHIP:DMG:                         {
          [1650278416.248931][11064:11069] CHIP:DMG:                                 CommandPathIB =
          [1650278416.249011][11064:11069] CHIP:DMG:                                 {
          [1650278416.249100][11064:11069] CHIP:DMG:                                         EndpointId = 0x0,
          [1650278416.249186][11064:11069] CHIP:DMG:                                         ClusterId = 0x3c,
          [1650278416.249268][11064:11069] CHIP:DMG:                                         CommandId = 0x1,
          [1650278416.249347][11064:11069] CHIP:DMG:                                 },
          [1650278416.249430][11064:11069] CHIP:DMG:
          [1650278416.249501][11064:11069] CHIP:DMG:                                 StatusIB =
          [1650278416.249581][11064:11069] CHIP:DMG:                                 {
          [1650278416.249664][11064:11069] CHIP:DMG:                                         status = 0x00 (SUCCESS),
          [1650278416.249738][11064:11069] CHIP:DMG:                                 },
          [1650278416.249823][11064:11069] CHIP:DMG:
          [1650278416.249889][11064:11069] CHIP:DMG:                         },
          [1650278416.249969][11064:11069] CHIP:DMG:
          [1650278416.250035][11064:11069] CHIP:DMG:                 },
          [1650278416.250113][11064:11069] CHIP:DMG:
          [1650278416.250169][11064:11069] CHIP:DMG:         ],
          [1650278416.250241][11064:11069] CHIP:DMG:
          [1650278416.250298][11064:11069] CHIP:DMG:         InteractionModelRevision = 1
          [1650278416.250355][11064:11069] CHIP:DMG: },
          [1650278416.250535][11064:11069] CHIP:DMG: Received Command Response Status for Endpoint=0 Cluster=0x0000_003C Command=0x0000_0001 Status=0x0
          [1650278416.250634][11064:11069] CHIP:DMG: ICR moving to [AwaitingDe]
      disabled: true

    - label: "TH_CR1 sends command to TH_CE to read the list of Fabrics"
      PICS: OPCREDS.C.A0001
      verification: |
          On first controller, using chip tool read fabricList

          ./chip-tool operationalcredentials read fabrics 1 0 --fabric-filtered 0


           CHIP:TOO: Endpoint: 0 Cluster: 0x0000_003E Attribute 0x0000_0001 DataVersion: 3621507058
          [1649245801.244173][10091:10096] CHIP:TOO:   Fabrics: 1 entries
          [1649245801.244305][10091:10096] CHIP:TOO:     [1]: {
          [1649245801.244348][10091:10096] CHIP:TOO:       RootPublicKey: 045541017FCEFD0D83963C9ED7F21380C6B789EB989B5D20DC318FAE92D60D0F685666505E9C4F86C49ADC71AB3A8B9B44FD43214CF9BE2B6D47DE01F28FE1544F
          [1649245801.244400][10091:10096] CHIP:TOO:       VendorId: 65521
          [1649245801.244431][10091:10096] CHIP:TOO:       FabricId: 1
          [1649245801.244461][10091:10096] CHIP:TOO:       NodeId: 1
          [1649245801.244491][10091:10096] CHIP:TOO:       Label:
          [1649245801.244521][10091:10096] CHIP:TOO:       FabricIndex: 1
          [1649245801.244552][10091:10096] CHIP:TOO:      }
          [1649245801.244671][10091:10096] CHIP:EM: Sending Standalone Ack for MessageCounter:8407998 on exchange 12989i
      disabled: true

    - label: "DUT_CR2 starts a commissioning process with TH_CE"
      PICS: CADMIN.C
      verification: |
          On second Controller connect to the accessory.

          Below is the example when using chip tool as controller
          ./chip-tool pairing onnetwork 2 20202021 --commissioner-name beta

          Verify you got below message
          Device commissioning completed with success
      disabled: true

    - label: "Verify TH_CE is now discoverable over DNS-SD with two SRV Records"
      verification: |
          On the raspi , Verify if the DUT is broadcasting using

          ubuntu@ubuntu:~/may10_cntrl2/connectedhomeip/examples/chip-tool/out/debug$ avahi-browse -rt _matter._tcp
          +   eth0 IPv6 E0AF53B23E580769-0000000000000002             _matter._tcp         local
          +   eth0 IPv6 7FF84D214A19B581-0000000000000001             _matter._tcp         local
          =   eth0 IPv6 E0AF53B23E580769-0000000000000002             _matter._tcp         local
             hostname = [E45F010F3BAF0000.local]
             address = [fe80::e65f:1ff:fe0f:3baf]
             port = [5540]
             txt = ["T=1" "CRA=300" "CRI=5000"]
          =   eth0 IPv6 7FF84D214A19B581-0000000000000001             _matter._tcp         local
             hostname = [E45F010F3BAF0000.local]
             address = [fe80::e65f:1ff:fe0f:3baf]
             port = [5540]
             txt = ["T=1" "CRA=300" "CRI=5000"]
      disabled: true

    - label:
          "DUT_CR2 sends command to TH_CE to write and read the Basic
          Information Clusters NodeLabel mandatory attribute"
      PICS: BINFO.C.A0005
      verification: |
          On the 2nd controller write attribute and read attribute to and from TH_CE

          Below is the example while using chip tool on second controller,
          ./chip-tool basic write  node-label te5new 2 0 --commissioner-name beta

          CHIP:DMG: WriteResponseMessage =
          [1649245940.788522][10110:10115] CHIP:DMG: {
          [1649245940.788577][10110:10115] CHIP:DMG:         AttributeStatusIBs =
          [1649245940.788653][10110:10115] CHIP:DMG:         [
          [1649245940.788713][10110:10115] CHIP:DMG:                 AttributeStatusIB =
          [1649245940.788787][10110:10115] CHIP:DMG:                 {
          [1649245940.788852][10110:10115] CHIP:DMG:                         AttributePathIB =
          [1649245940.788931][10110:10115] CHIP:DMG:                         {
          [1649245940.789009][10110:10115] CHIP:DMG:                                 Endpoint = 0x0,
          [1649245940.789143][10110:10115] CHIP:DMG:                                 Cluster = 0x28,
          [1649245940.789228][10110:10115] CHIP:DMG:                                 Attribute = 0x0000_0005,
          [1649245940.789313][10110:10115] CHIP:DMG:                         }
          [1649245940.789388][10110:10115] CHIP:DMG:
          [1649245940.789454][10110:10115] CHIP:DMG:                         StatusIB =
          [1649245940.789519][10110:10115] CHIP:DMG:                         {
          [1649245940.789588][10110:10115] CHIP:DMG:                                 status = 0x00 (SUCCESS),
          [1649245940.789654][10110:10115] CHIP:DMG:                         },
          [1649245940.789719][10110:10115] CHIP:DMG:
          [1649245940.789778][10110:10115] CHIP:DMG:                 },
          [1649245940.789841][10110:10115] CHIP:DMG:
          [1649245940.789885][10110:10115] CHIP:DMG:         ],
          [1649245940.789941][10110:10115] CHIP:DMG:
          [1649245940.789984][10110:10115] CHIP:DMG:         InteractionModelRevision = 1
          [1649245940.790033][10110:10115] CHIP:DMG: }
          [1649245940.790167][10110:10115] CHIP:DMG: WriteClient moving to [AwaitingDe]


          Verify read attribute returns the updated value written
          ./chip-tool basic read node-label 1 0 --commissioner-name beta
          CHIP:TOO: Endpoint: 0 Cluster: 0x0000_0028 Attribute 0x0000_0005 DataVersion: 3061847068
          [1649245950.006849][10116:10121] CHIP:TOO:   NodeLabel: te5new
          [1649245950.007024][10116:10121] CHIP:EM: Sending Standalone Ack for MessageCounter:12495101 on exchange 24816i
      disabled: true

    - label:
          "DUT_CR2 sends command to TH_CE to read the list of Fabrics on TH_CE"
      PICS: OPCREDS.C.A0001
      verification: |
          On second controller controller read fabricList

          Below is the example while using chip tool on second controller,
          ./chip-tool operationalcredentials read fabrics 2 0 --fabric-filtered 0 --commissioner-name beta

          CHIP:TOO: Endpoint: 0 Cluster: 0x0000_003E Attribute 0x0000_0001 DataVersion: 3229397217
          [1650277071.834099][40790:40795] CHIP:TOO:   Fabrics: 2 entries
          [1650277071.834120][40790:40795] CHIP:TOO:     [1]: {
          [1650277071.834126][40790:40795] CHIP:TOO:       RootPublicKey: 0426F120BC098B3BDBA37807F6C2F7F396F5CD89F81F4AF4C80C1089B9B856F1FCDC10AA8A0CF30F629FA9E13E131330C3C53D917C3048456D73E943DB63910823
          [1650277071.834134][40790:40795] CHIP:TOO:       VendorId: 65521
          [1650277071.834137][40790:40795] CHIP:TOO:       FabricId: 1
          [1650277071.834141][40790:40795] CHIP:TOO:       NodeId: 1
          [1650277071.834147][40790:40795] CHIP:TOO:       Label:
          [1650277071.834151][40790:40795] CHIP:TOO:       FabricIndex: 1
          [1650277071.834155][40790:40795] CHIP:TOO:      }
          [1650277071.834161][40790:40795] CHIP:TOO:     [2]: {
          [1650277071.834165][40790:40795] CHIP:TOO:       RootPublicKey: 045B7C9F80F17A0D5B2EA727562424A0AC978C2F4A7BBE659C9076978A6630771166AB1506D714279AFDF2A3B33A643025E0194A376A520B1F6773DB2E4993B5CF
          [1650277071.834169][40790:40795] CHIP:TOO:       VendorId: 65521
          [1650277071.834173][40790:40795] CHIP:TOO:       FabricId: 1
          [1650277071.834176][40790:40795] CHIP:TOO:       NodeId: 2
          [1650277071.834179][40790:40795] CHIP:TOO:       Label:
          [1650277071.834182][40790:40795] CHIP:TOO:       FabricIndex: 2
          [1650277071.834186][40790:40795] CHIP:TOO:      }
          [1650277071.834215][40790:40795] CHIP:EM: Sending Standalone Ack for MessageCounter:15057119 on exchange 50631i
      disabled: true

    - label:
          "TH_CR1 sends command to TH_CE to write and read the Basic Information
          Clusters NodeLabel mandatory attribute"
      PICS: BINFO.C.A0005
      verification: |
          On first controller, using chip-tool write attribute, Verify read attribute returns the updated value written.

          ./chip-tool basic write node-label te8 1 0

          CHIP:DMG: WriteResponseMessage =
          [1649245940.788522][10110:10115] CHIP:DMG: {
          [1649245940.788577][10110:10115] CHIP:DMG:         AttributeStatusIBs =
          [1649245940.788653][10110:10115] CHIP:DMG:         [
          [1649245940.788713][10110:10115] CHIP:DMG:                 AttributeStatusIB =
          [1649245940.788787][10110:10115] CHIP:DMG:                 {
          [1649245940.788852][10110:10115] CHIP:DMG:                         AttributePathIB =
          [1649245940.788931][10110:10115] CHIP:DMG:                         {
          [1649245940.789009][10110:10115] CHIP:DMG:                                 Endpoint = 0x0,
          [1649245940.789143][10110:10115] CHIP:DMG:                                 Cluster = 0x28,
          [1649245940.789228][10110:10115] CHIP:DMG:                                 Attribute = 0x0000_0005,
          [1649245940.789313][10110:10115] CHIP:DMG:                         }
          [1649245940.789388][10110:10115] CHIP:DMG:
          [1649245940.789454][10110:10115] CHIP:DMG:                         StatusIB =
          [1649245940.789519][10110:10115] CHIP:DMG:                         {
          [1649245940.789588][10110:10115] CHIP:DMG:                                 status = 0x00 (SUCCESS),
          [1649245940.789654][10110:10115] CHIP:DMG:                         },
          [1649245940.789719][10110:10115] CHIP:DMG:
          [1649245940.789778][10110:10115] CHIP:DMG:                 },
          [1649245940.789841][10110:10115] CHIP:DMG:
          [1649245940.789885][10110:10115] CHIP:DMG:         ],
          [1649245940.789941][10110:10115] CHIP:DMG:
          [1649245940.789984][10110:10115] CHIP:DMG:         InteractionModelRevision = 1
          [1649245940.790033][10110:10115] CHIP:DMG: }
          [1649245940.790167][10110:10115] CHIP:DMG: WriteClient moving to [AwaitingDe]

          Verify read attribute returns the updated value written
          ./chip-tool basic read node-label 1 0
          CHIP:TOO: Endpoint: 0 Cluster: 0x0000_0028 Attribute 0x0000_0005 DataVersion: 3061847068
          [1649245950.006849][10116:10121] CHIP:TOO:   NodeLabel: te8
          [1649245950.007024][10116:10121] CHIP:EM: Sending Standalone Ack for MessageCounter:12495101 on exchange 24816i
      disabled: true

    - label:
          "DUT_CR2 sends command to TH_CE to read, write and then read the Basic
          Information Clusters NodeLabel mandatory attribute"
      PICS: BINFO.C.A0005
      verification: |
          On second controller read, write attribute and then read attribute to and from TH_CE


          Below is the example while using chip tool on second controller,
          ./chip-tool basic write node-label te5new 2 0 --commissioner-name beta

          CHIP:DMG: WriteResponseMessage =
          [1649245940.788522][10110:10115] CHIP:DMG: {
          [1649245940.788577][10110:10115] CHIP:DMG:         AttributeStatusIBs =
          [1649245940.788653][10110:10115] CHIP:DMG:         [
          [1649245940.788713][10110:10115] CHIP:DMG:                 AttributeStatusIB =
          [1649245940.788787][10110:10115] CHIP:DMG:                 {
          [1649245940.788852][10110:10115] CHIP:DMG:                         AttributePathIB =
          [1649245940.788931][10110:10115] CHIP:DMG:                         {
          [1649245940.789009][10110:10115] CHIP:DMG:                                 Endpoint = 0x0,
          [1649245940.789143][10110:10115] CHIP:DMG:                                 Cluster = 0x28,
          [1649245940.789228][10110:10115] CHIP:DMG:                                 Attribute = 0x0000_0005,
          [1649245940.789313][10110:10115] CHIP:DMG:                         }
          [1649245940.789388][10110:10115] CHIP:DMG:
          [1649245940.789454][10110:10115] CHIP:DMG:                         StatusIB =
          [1649245940.789519][10110:10115] CHIP:DMG:                         {
          [1649245940.789588][10110:10115] CHIP:DMG:                                 status = 0x00 (SUCCESS),
          [1649245940.789654][10110:10115] CHIP:DMG:                         },
          [1649245940.789719][10110:10115] CHIP:DMG:
          [1649245940.789778][10110:10115] CHIP:DMG:                 },
          [1649245940.789841][10110:10115] CHIP:DMG:
          [1649245940.789885][10110:10115] CHIP:DMG:         ],
          [1649245940.789941][10110:10115] CHIP:DMG:
          [1649245940.789984][10110:10115] CHIP:DMG:         InteractionModelRevision = 1
          [1649245940.790033][10110:10115] CHIP:DMG: }
          [1649245940.790167][10110:10115] CHIP:DMG: WriteClient moving to [AwaitingDe]

          Verify read attribute returns the updated value written

          ./chip-tool basic read node-label 2 0 --commissioner-name beta
          CHIP:TOO: Endpoint: 0 Cluster: 0x0000_0028 Attribute 0x0000_0005 DataVersion: 3061847068
          [1649245950.006849][10116:10121] CHIP:TOO:   NodeLabel: te5new
          [1649245950.007024][10116:10121] CHIP:EM: Sending Standalone Ack for MessageCounter:12495101 on exchange 24816i
      disabled: true

    - label: "Turn off TH_CR1"
      verification: |
          No need to do anything as chip-tool process exits after each command
      disabled: true

    - label:
          "DUT_CR2 sends command to TH_CE to open a commissioning window with a
          commissioning timeout of PIXIT.CADMIN.CwDuration seconds using BCM
          (Basic Commissioning Method)"
      PICS: CADMIN.C.C01.Tx
      verification: |
          On second controller using chip-tool open commissioning widow using BCM.

          Below is the example while using chip tool on second controller,
          ./chip-tool administratorcommissioning open-basic-commissioning-window 500 2 0 --timedInteractionTimeoutMs 1000  --commissioner-name beta


          CHIP:DMG: InvokeResponseMessage =
          [1650278416.248379][11064:11069] CHIP:DMG: {
          [1650278416.248436][11064:11069] CHIP:DMG:         suppressResponse = false,
          [1650278416.248495][11064:11069] CHIP:DMG:         InvokeResponseIBs =
          [1650278416.248570][11064:11069] CHIP:DMG:         [
          [1650278416.248630][11064:11069] CHIP:DMG:                 InvokeResponseIB =
          [1650278416.248718][11064:11069] CHIP:DMG:                 {
          [1650278416.248783][11064:11069] CHIP:DMG:                         CommandStatusIB =
          [1650278416.248860][11064:11069] CHIP:DMG:                         {
          [1650278416.248931][11064:11069] CHIP:DMG:                                 CommandPathIB =
          [1650278416.249011][11064:11069] CHIP:DMG:                                 {
          [1650278416.249100][11064:11069] CHIP:DMG:                                         EndpointId = 0x0,
          [1650278416.249186][11064:11069] CHIP:DMG:                                         ClusterId = 0x3c,
          [1650278416.249268][11064:11069] CHIP:DMG:                                         CommandId = 0x1,
          [1650278416.249347][11064:11069] CHIP:DMG:                                 },
          [1650278416.249430][11064:11069] CHIP:DMG:
          [1650278416.249501][11064:11069] CHIP:DMG:                                 StatusIB =
          [1650278416.249581][11064:11069] CHIP:DMG:                                 {
          [1650278416.249664][11064:11069] CHIP:DMG:                                         status = 0x00 (SUCCESS),
          [1650278416.249738][11064:11069] CHIP:DMG:                                 },
          [1650278416.249823][11064:11069] CHIP:DMG:
          [1650278416.249889][11064:11069] CHIP:DMG:                         },
          [1650278416.249969][11064:11069] CHIP:DMG:
          [1650278416.250035][11064:11069] CHIP:DMG:                 },
          [1650278416.250113][11064:11069] CHIP:DMG:
          [1650278416.250169][11064:11069] CHIP:DMG:         ],
          [1650278416.250241][11064:11069] CHIP:DMG:
          [1650278416.250298][11064:11069] CHIP:DMG:         InteractionModelRevision = 1
          [1650278416.250355][11064:11069] CHIP:DMG: },
          [1650278416.250535][11064:11069] CHIP:DMG: Received Command Response Status for Endpoint=0 Cluster=0x0000_003C Command=0x0000_0001 Status=0x0
          [1650278416.250634][11064:11069] CHIP:DMG: ICR moving to [AwaitingDe]
      disabled: true

    - label:
          "DUT_CR2 sends command to TH_CE to revoke the commissioning window
          using the Revoke Commissioning command"
      PICS: CADMIN.C.C02.Tx
      verification: |
          On second controller using chip-tool run revoke command

          Below is the example while using chip tool on second controller,
          ./chip-tool administratorcommissioning revoke-commissioning 2 0 --timedInteractionTimeoutMs 1000 --commissioner-name beta


          CHIP:DMG: InvokeResponseMessage =
          [1650278416.248379][11064:11069] CHIP:DMG: {
          [1650278416.248436][11064:11069] CHIP:DMG:         suppressResponse = false,
          [1650278416.248495][11064:11069] CHIP:DMG:         InvokeResponseIBs =
          [1650278416.248570][11064:11069] CHIP:DMG:         [
          [1650278416.248630][11064:11069] CHIP:DMG:                 InvokeResponseIB =
          [1650278416.248718][11064:11069] CHIP:DMG:                 {
          [1650278416.248783][11064:11069] CHIP:DMG:                         CommandStatusIB =
          [1650278416.248860][11064:11069] CHIP:DMG:                         {
          [1650278416.248931][11064:11069] CHIP:DMG:                                 CommandPathIB =
          [1650278416.249011][11064:11069] CHIP:DMG:                                 {
          [1650278416.249100][11064:11069] CHIP:DMG:                                         EndpointId = 0x0,
          [1650278416.249186][11064:11069] CHIP:DMG:                                         ClusterId = 0x3c,
          [1650278416.249268][11064:11069] CHIP:DMG:                                         CommandId = 0x1,
          [1650278416.249347][11064:11069] CHIP:DMG:                                 },
          [1650278416.249430][11064:11069] CHIP:DMG:
          [1650278416.249501][11064:11069] CHIP:DMG:                                 StatusIB =
          [1650278416.249581][11064:11069] CHIP:DMG:                                 {
          [1650278416.249664][11064:11069] CHIP:DMG:                                         status = 0x00 (SUCCESS),
          [1650278416.249738][11064:11069] CHIP:DMG:                                 },
          [1650278416.249823][11064:11069] CHIP:DMG:
          [1650278416.249889][11064:11069] CHIP:DMG:                         },
          [1650278416.249969][11064:11069] CHIP:DMG:
          [1650278416.250035][11064:11069] CHIP:DMG:                 },
          [1650278416.250113][11064:11069] CHIP:DMG:
          [1650278416.250169][11064:11069] CHIP:DMG:         ],
          [1650278416.250241][11064:11069] CHIP:DMG:
          [1650278416.250298][11064:11069] CHIP:DMG:         InteractionModelRevision = 1
          [1650278416.250355][11064:11069] CHIP:DMG: },
          [1650278416.250535][11064:11069] CHIP:DMG: Received Command Response Status for Endpoint=0 Cluster=0x0000_003C Command=0x0000_0001 Status=0x0
          [1650278416.250634][11064:11069] CHIP:DMG: ICR moving to [AwaitingDe]
      disabled: true

    - label:
          "TH_CR3 attempts to execute a PASE to starts a commissioning process
          with TH_CE"
      PICS: CADMIN.C
      verification: |
          1. On third controller, using chip-tool connect to the accessory. Connect attempt should fail, i.e
          ./chip-tool pairing onnetwork 3 20202021 --commissioner-name gamma

          verify you got the following message in the TH log

          CHIP:SC: PASESession timed out while waiting for a response from the peer. Expected message type was 33
          CHIP:TOO: Secure Pairing Failed
          CHIP:TOO: Pairing Failure: ../../third_party/connectedhomeip/src/protocols/secure_channel/PASESession.cpp:324: CHIP Error 0x00000032: Timeout
      disabled: true

    - label:
          "DUT_CR2 sends command to TH_CE to write and read the Basic
          Information Clusters NodeLabel mandatory attribute"
      PICS: BINFO.C.A0005
      verification: |
          On second controller, write attribute and read attribute to and from TH_CE

          Below is the example while using chip tool on second controller,
          ./chip-tool basic write node-label te5new 2 0 --commissioner-name beta

          CHIP:DMG: WriteResponseMessage =
          [1649245940.788522][10110:10115] CHIP:DMG: {
          [1649245940.788577][10110:10115] CHIP:DMG:         AttributeStatusIBs =
          [1649245940.788653][10110:10115] CHIP:DMG:         [
          [1649245940.788713][10110:10115] CHIP:DMG:                 AttributeStatusIB =
          [1649245940.788787][10110:10115] CHIP:DMG:                 {
          [1649245940.788852][10110:10115] CHIP:DMG:                         AttributePathIB =
          [1649245940.788931][10110:10115] CHIP:DMG:                         {
          [1649245940.789009][10110:10115] CHIP:DMG:                                 Endpoint = 0x0,
          [1649245940.789143][10110:10115] CHIP:DMG:                                 Cluster = 0x28,
          [1649245940.789228][10110:10115] CHIP:DMG:                                 Attribute = 0x0000_0005,
          [1649245940.789313][10110:10115] CHIP:DMG:                         }
          [1649245940.789388][10110:10115] CHIP:DMG:
          [1649245940.789454][10110:10115] CHIP:DMG:                         StatusIB =
          [1649245940.789519][10110:10115] CHIP:DMG:                         {
          [1649245940.789588][10110:10115] CHIP:DMG:                                 status = 0x00 (SUCCESS),
          [1649245940.789654][10110:10115] CHIP:DMG:                         },
          [1649245940.789719][10110:10115] CHIP:DMG:
          [1649245940.789778][10110:10115] CHIP:DMG:                 },
          [1649245940.789841][10110:10115] CHIP:DMG:
          [1649245940.789885][10110:10115] CHIP:DMG:         ],
          [1649245940.789941][10110:10115] CHIP:DMG:
          [1649245940.789984][10110:10115] CHIP:DMG:         InteractionModelRevision = 1
          [1649245940.790033][10110:10115] CHIP:DMG: }
          [1649245940.790167][10110:10115] CHIP:DMG: WriteClient moving to [AwaitingDe]

          Verify read attribute returns the updated value written
          ./chip-tool basic read node-label 2 0 --commissioner-name beta
          CHIP:TOO: Endpoint: 0 Cluster: 0x0000_0028 Attribute 0x0000_0005 DataVersion: 3061847068
          [1649245950.006849][10116:10121] CHIP:TOO:   NodeLabel: te5new
          [1649245950.007024][10116:10121] CHIP:EM: Sending Standalone Ack for MessageCounter:12495101 on exchange 24816i
      disabled: true

    - label:
          "DUT_CR2 sends command to TH_CE to open a commissioning window using
          BCM"
      PICS: CADMIN.C.C01.Tx
      verification: |
          On second controller using chip-tool open commissioning widow using BCM.

          Below is the example while using chip tool on second controller,
          ./chip-tool administratorcommissioning open-basic-commissioning-window 180 2 0 --timedInteractionTimeoutMs 1000 --commissioner-name beta


          CHIP:DMG: InvokeResponseMessage =
          [1650278416.248379][11064:11069] CHIP:DMG: {
          [1650278416.248436][11064:11069] CHIP:DMG:         suppressResponse = false,
          [1650278416.248495][11064:11069] CHIP:DMG:         InvokeResponseIBs =
          [1650278416.248570][11064:11069] CHIP:DMG:         [
          [1650278416.248630][11064:11069] CHIP:DMG:                 InvokeResponseIB =
          [1650278416.248718][11064:11069] CHIP:DMG:                 {
          [1650278416.248783][11064:11069] CHIP:DMG:                         CommandStatusIB =
          [1650278416.248860][11064:11069] CHIP:DMG:                         {
          [1650278416.248931][11064:11069] CHIP:DMG:                                 CommandPathIB =
          [1650278416.249011][11064:11069] CHIP:DMG:                                 {
          [1650278416.249100][11064:11069] CHIP:DMG:                                         EndpointId = 0x0,
          [1650278416.249186][11064:11069] CHIP:DMG:                                         ClusterId = 0x3c,
          [1650278416.249268][11064:11069] CHIP:DMG:                                         CommandId = 0x1,
          [1650278416.249347][11064:11069] CHIP:DMG:                                 },
          [1650278416.249430][11064:11069] CHIP:DMG:
          [1650278416.249501][11064:11069] CHIP:DMG:                                 StatusIB =
          [1650278416.249581][11064:11069] CHIP:DMG:                                 {
          [1650278416.249664][11064:11069] CHIP:DMG:                                         status = 0x00 (SUCCESS),
          [1650278416.249738][11064:11069] CHIP:DMG:                                 },
          [1650278416.249823][11064:11069] CHIP:DMG:
          [1650278416.249889][11064:11069] CHIP:DMG:                         },
          [1650278416.249969][11064:11069] CHIP:DMG:
          [1650278416.250035][11064:11069] CHIP:DMG:                 },
          [1650278416.250113][11064:11069] CHIP:DMG:
          [1650278416.250169][11064:11069] CHIP:DMG:         ],
          [1650278416.250241][11064:11069] CHIP:DMG:
          [1650278416.250298][11064:11069] CHIP:DMG:         InteractionModelRevision = 1
          [1650278416.250355][11064:11069] CHIP:DMG: },
          [1650278416.250535][11064:11069] CHIP:DMG: Received Command Response Status for Endpoint=0 Cluster=0x0000_003C Command=0x0000_0001 Status=0x0
          [1650278416.250634][11064:11069] CHIP:DMG: ICR moving to [AwaitingDe]
      disabled: true

    - label:
          "Wait for commissioning window that was opened in step 13 to timeout"
      verification: |
          Wait for the timeout of commissioning window in the above step
      disabled: true

    - label:
          "DUT_CR2 sends command to TH_CE to open a commissioning window using
          BCM"
      PICS: CADMIN.C.C01.Tx
      verification: |
          On second controller using chip-tool open commissioning widow using BCM.

          Below is the example while using chip tool on second controller,
          ./chip-tool administratorcommissioning open-basic-commissioning-window 500 2 0 --timedInteractionTimeoutMs 1000 --commissioner-name beta


          CHIP:DMG: InvokeResponseMessage =
          [1650278416.248379][11064:11069] CHIP:DMG: {
          [1650278416.248436][11064:11069] CHIP:DMG:         suppressResponse = false,
          [1650278416.248495][11064:11069] CHIP:DMG:         InvokeResponseIBs =
          [1650278416.248570][11064:11069] CHIP:DMG:         [
          [1650278416.248630][11064:11069] CHIP:DMG:                 InvokeResponseIB =
          [1650278416.248718][11064:11069] CHIP:DMG:                 {
          [1650278416.248783][11064:11069] CHIP:DMG:                         CommandStatusIB =
          [1650278416.248860][11064:11069] CHIP:DMG:                         {
          [1650278416.248931][11064:11069] CHIP:DMG:                                 CommandPathIB =
          [1650278416.249011][11064:11069] CHIP:DMG:                                 {
          [1650278416.249100][11064:11069] CHIP:DMG:                                         EndpointId = 0x0,
          [1650278416.249186][11064:11069] CHIP:DMG:                                         ClusterId = 0x3c,
          [1650278416.249268][11064:11069] CHIP:DMG:                                         CommandId = 0x1,
          [1650278416.249347][11064:11069] CHIP:DMG:                                 },
          [1650278416.249430][11064:11069] CHIP:DMG:
          [1650278416.249501][11064:11069] CHIP:DMG:                                 StatusIB =
          [1650278416.249581][11064:11069] CHIP:DMG:                                 {
          [1650278416.249664][11064:11069] CHIP:DMG:                                         status = 0x00 (SUCCESS),
          [1650278416.249738][11064:11069] CHIP:DMG:                                 },
          [1650278416.249823][11064:11069] CHIP:DMG:
          [1650278416.249889][11064:11069] CHIP:DMG:                         },
          [1650278416.249969][11064:11069] CHIP:DMG:
          [1650278416.250035][11064:11069] CHIP:DMG:                 },
          [1650278416.250113][11064:11069] CHIP:DMG:
          [1650278416.250169][11064:11069] CHIP:DMG:         ],
          [1650278416.250241][11064:11069] CHIP:DMG:
          [1650278416.250298][11064:11069] CHIP:DMG:         InteractionModelRevision = 1
          [1650278416.250355][11064:11069] CHIP:DMG: },
          [1650278416.250535][11064:11069] CHIP:DMG: Received Command Response Status for Endpoint=0 Cluster=0x0000_003C Command=0x0000_0001 Status=0x0
          [1650278416.250634][11064:11069] CHIP:DMG: ICR moving to [AwaitingDe]
      disabled: true

    - label:
          "TH_CR1 starts a commissioning process with TH_CE before the timeout
          from step 15"
      PICS: CADMIN.C
      verification: |
          Using your 1st Controller connect to the accessory.

          Below is the example when using chip tool as controller
          ./chip-tool pairing onnetwork 1 20202021

          [1651786200275] [36301:315544] CHIP: [DMG] Received Command Response Data, Endpoint=0 Cluster=0x0000_003E Command=0x0000_0008
          [1651786200275] [36301:315544] CHIP: [CTL] Device returned status 9 on receiving the NOC
          [1651786200275] [36301:315544] CHIP: [CTL] Add NOC failed with error ../../src/controller/CHIPDeviceController.cpp:1187: CHIP Error 0x0000007E: Trying to add a NOC for a fabric that already exists
          [1651786200275] [36301:315544] CHIP: [CTL] Error on commissioning step "SendNOC": "../../src/controller/CHIPDeviceController.cpp:1187: CHIP Error 0x0000007E: Trying to add a NOC for a fabric that already exists"

          Verify that the commissioning process fails as TH_CE was already commissioned by TH_CR1 in step 1
      disabled: true