[NXP][docs] Put all NXP guides in nxp folder and update paths (#33092)
* [NXP][docs] Put all NXP guides in nxp folder and update paths
* Restyled by prettier-markdown
---------
Co-authored-by: Restyled.io <commits@restyled.io>
diff --git a/docs/guides/README.md b/docs/guides/README.md
index dbdda1b..e9a42a1 100644
--- a/docs/guides/README.md
+++ b/docs/guides/README.md
@@ -18,8 +18,7 @@
- [nRF Connect - Factory Data Configuration](./nrfconnect_factory_data_configuration.md)
- [nRF Connect - Platform Overview](./nrfconnect_platform_overview.md)
- [nRF Connect - Software Update](./nrfconnect_examples_software_update.md)
-- [NXP - Android Commissioning](./nxp_k32w_android_commissioning.md)
-- [NXP - Linux Examples](./nxp_imx8m_linux_examples.md)
+- [NXP - Getting Started Guide](./nxp/README.md)
- [Silicon Labs - Documentation](https://siliconlabs.github.io/matter/latest/index.html)
- [Silicon Labs - Getting Started](./silabs_getting_started.md)
- [Silicon Labs - Software Update](./silabs_efr32_software_update.md)
diff --git a/docs/guides/darwin.md b/docs/guides/darwin.md
index 0b31280..4a9a8da 100644
--- a/docs/guides/darwin.md
+++ b/docs/guides/darwin.md
@@ -259,7 +259,7 @@
- [mbedOS](/examples/all-clusters-app/mbed/README.md)
- [nRF Connect All Clusters](./nrfconnect_examples_configuration.md)
- [nRF Connect Pump](/examples/pump-app/nrfconnect/README.md)
-- [NXP Examples](./nxp_imx8m_linux_examples.md)
+- [NXP Examples](./nxp/nxp_imx8m_linux_examples.md)
- [NXP](/examples/all-clusters-app/nxp/mw320/README.md)
- [Infineon CYW30739 Lighting](/examples/lighting-app/infineon/cyw30739/README.md)
- [Infineon PSoC6](/examples/all-clusters-app/infineon/psoc6/README.md)
diff --git a/docs/guides/index.md b/docs/guides/index.md
index 2a5d3a6..7ec0ec6 100644
--- a/docs/guides/index.md
+++ b/docs/guides/index.md
@@ -10,6 +10,7 @@
*
esp32/README
+nxp/README
ti/ti_platform_overview
```
@@ -34,9 +35,7 @@
- [nRF Connect - Factory Data Configuration](./nrfconnect_factory_data_configuration.md)
- [nRF Connect - Platform Overview](./nrfconnect_platform_overview.md)
- [nRF Connect - Software Update](./nrfconnect_examples_software_update.md)
-- [NXP - Android Commissioning](./nxp_k32w_android_commissioning.md)
-- [NXP - Linux Examples](./nxp_imx8m_linux_examples.md)
-- [NXP - Manufacturing Data](./nxp_manufacturing_flow.md)
+- [NXP - Getting Started Guide](./nxp/README.md)
- [Silicon Labs - Documentation](https://siliconlabs.github.io/matter/latest/index.html)
- [Silicon Labs - Getting Started](./silabs_getting_started.md)
- [Silicon Labs - Software Update](./silabs_efr32_software_update.md)
diff --git a/docs/guides/nxp/README.md b/docs/guides/nxp/README.md
new file mode 100644
index 0000000..be225ac
--- /dev/null
+++ b/docs/guides/nxp/README.md
@@ -0,0 +1,14 @@
+```{toctree}
+:glob:
+:maxdepth: 1
+
+*
+```
+
+# NXP Getting Started Guide
+
+- [NXP - Android Commissioning](nxp_k32w_android_commissioning.md)
+- [NXP - Linux Examples](nxp_imx8m_linux_examples.md)
+- [NXP - Manufacturing Data](nxp_manufacturing_flow.md)
+- [NXP - RW61x OTA Software Update Guide](nxp_rw61x_ota_software_update.md)
+- [NXP - Zephyr OTA Software Update Guide](nxp_zephyr_ota_software_update.md)
diff --git a/docs/guides/nxp_imx8m_linux_examples.md b/docs/guides/nxp/nxp_imx8m_linux_examples.md
similarity index 95%
rename from docs/guides/nxp_imx8m_linux_examples.md
rename to docs/guides/nxp/nxp_imx8m_linux_examples.md
index 6b1ad2b..4ff8ded 100644
--- a/docs/guides/nxp_imx8m_linux_examples.md
+++ b/docs/guides/nxp/nxp_imx8m_linux_examples.md
@@ -4,11 +4,11 @@
Linux Yocto SDK and then run the output executable files on the **NXP i.MX 8M**
**Mini EVK** development board.
-- [CHIP Linux All-clusters Example](../../examples/all-clusters-app/linux/README.md)
-- [CHIP Linux Lighting Example](../../examples/lighting-app/linux/README.md)
+- [CHIP Linux All-clusters Example](../../../examples/all-clusters-app/linux/README.md)
+- [CHIP Linux Lighting Example](../../../examples/lighting-app/linux/README.md)
- [CHIP Linux Thermostat Example](https://github.com/project-chip/connectedhomeip/tree/master/examples/thermostat/linux)
-- [CHIP Linux CHIP-tool Example](../../examples/chip-tool/README.md)
-- [CHIP Linux OTA-provider Example](../../examples/ota-provider-app/linux/README.md)
+- [CHIP Linux CHIP-tool Example](../../../examples/chip-tool/README.md)
+- [CHIP Linux OTA-provider Example](../../../examples/ota-provider-app/linux/README.md)
This document has been tested on:
@@ -234,8 +234,8 @@
In order to test the CHIP protocol functions, another device on the same
network is needed to run the
- [ChipDeviceController](../../src/controller/python) tool to communicate with
- the **i.MX 8M Mini EVK**.
+ [ChipDeviceController](../../../src/controller/python) tool to communicate
+ with the **i.MX 8M Mini EVK**.
The ChipDeviceController can be a laptop / workstation. Bluetooth
functionality is mandatory on this device.
@@ -252,7 +252,7 @@
- Boot up Ubuntu on the Raspberry Pi
- Clone this connectedhomeip project
- Follow Python ChipDeviceController
- [README.md](../../src/controller/python/README.md) document. Refer to
+ [README.md](../../../src/controller/python/README.md) document. Refer to
the "Building and installing" part to build the tool.
- Running
@@ -283,7 +283,7 @@
/home/root/thermostat-app --ble-device 0 --wifi # The bluetooth device used is hci0 and support wifi network
```
- - Run [ChipDeviceController](../../src/controller/python) on the
+ - Run [ChipDeviceController](../../../src/controller/python) on the
controller device to communicate with **i.MX 8M Mini EVK** running the
example.
diff --git a/docs/guides/nxp_k32w_android_commissioning.md b/docs/guides/nxp/nxp_k32w_android_commissioning.md
similarity index 94%
rename from docs/guides/nxp_k32w_android_commissioning.md
rename to docs/guides/nxp/nxp_k32w_android_commissioning.md
index b39a2f2..6d872f5 100644
--- a/docs/guides/nxp_k32w_android_commissioning.md
+++ b/docs/guides/nxp/nxp_k32w_android_commissioning.md
@@ -1,8 +1,8 @@
# Commissioning NXP K32W using Android CHIPTool
This article describes how to use
-[CHIPTool](../../examples/android/CHIPTool/README.md) for Android smartphones to
-commission an NXP K32W061 DK6 running
+[CHIPTool](../../../examples/android/CHIPTool/README.md) for Android smartphones
+to commission an NXP K32W061 DK6 running
[NXP K32W Light Example Application](#building-and-programming-nxp-k32w-light-example-application)
onto a CHIP-enabled Thread network.
@@ -47,7 +47,7 @@
to allow communication between devices running the CHIPTool and Light
applications:
-
+
<hr>
@@ -348,7 +348,7 @@
## Building and programming NXP K32W Light Example Application
See
-[NXP K32W Light Example Application README](../../examples/lighting-app/nxp/k32w/k32w0/README.md)
+[NXP K32W Light Example Application README](../../../examples/lighting-app/nxp/k32w/k32w0/README.md)
to learn how to build and program the light example onto an K32W061 DK6.
<hr>
@@ -356,7 +356,7 @@
## Building and installing Android CHIPTool
To build the CHIPTool application for your smartphone, read
-[Android CHIPTool README](../../examples/android/CHIPTool/README.md).
+[Android CHIPTool README](../../../examples/android/CHIPTool/README.md).
After building, install the application by completing the following steps:
@@ -396,7 +396,7 @@
3. Navigate to the _Form_ tab then push the _Form_ button using the default
parameters:
- 
+ 
4. The message _Form operation is successful_ should be display after a few
seconds.
@@ -430,7 +430,7 @@
1. Make sure that JP4 and JP7 jumpers are in leftmost position and a mini-USB
cable is connected between the LPC connector and PC
- 
+ 
2. Use a terminal emulator (e.g.: Putty) to connect to the UART console of the
accessory device. Use a baudrate of 115200.
@@ -466,14 +466,14 @@
progress with scanning, connection, and pairing. At the end of this process,
the Thread network settings screen appears.
- 
+ 
6. In the Thread network settings screen, use the default settings and tap the
_SAVE NETWORK_ button to send a Thread provisioning message to the accessory
device. You will see the "Network provisioning completed" message when the
accessory device successfully joins the Thread network.
- 
+ 
<hr>
@@ -483,7 +483,7 @@
the provisioning is completed successfully and you are connected to the
device.
- 
+ 
2. Verify that the text box on the screen is not empty and contains the IPv6
address of the accessory device.
diff --git a/docs/guides/nxp_manufacturing_flow.md b/docs/guides/nxp/nxp_manufacturing_flow.md
similarity index 100%
rename from docs/guides/nxp_manufacturing_flow.md
rename to docs/guides/nxp/nxp_manufacturing_flow.md
diff --git a/docs/guides/nxp_rw61x_ota_software_update.md b/docs/guides/nxp/nxp_rw61x_ota_software_update.md
similarity index 96%
rename from docs/guides/nxp_rw61x_ota_software_update.md
rename to docs/guides/nxp/nxp_rw61x_ota_software_update.md
index cdabf5e..1543b2f 100644
--- a/docs/guides/nxp_rw61x_ota_software_update.md
+++ b/docs/guides/nxp/nxp_rw61x_ota_software_update.md
@@ -89,7 +89,7 @@
- Using MCUXPresso, import the `mcuboot_opensource` demo example from the SDK
previously downloaded. The example can be found under the `ota_examples`
folder.
- 
+ 
- Before building the demo example, it should be specified that the
application to be run by the bootloader is monolithic. As a result, only one
image will be upgraded by the bootloader. This can be done by defining
@@ -99,7 +99,7 @@
Right click on the Project -> Properties -> C/C++ Build -> Settings -> Tool Settings -> MCU C Compiler -> Preprocessor -> Add "MONOLITHIC_APP=1" in the Defined Symbols
```
-
+
- Build the demo example project.
@@ -149,7 +149,7 @@
signature, the upgrade type, the swap status...
The all-clusters application can be generated using the instructions from the
-[README.md 'Building'](../../examples/all-clusters-app/nxp/rt/rw61x/README.md#building)
+[README.md 'Building'](../../../examples/all-clusters-app/nxp/rt/rw61x/README.md#building)
section. The application is automatically linked to be executed from the primary
image partition, taking into consideration the offset imposed by mcuboot.
@@ -242,8 +242,8 @@
Setup example :
-- [Chip-tool](../../examples/chip-tool/README.md) application running on the
- RPi.
+- [Chip-tool](../../../examples/chip-tool/README.md) application running on
+ the RPi.
- OTA Provider application built on the same RPi (as explained below).
- RW61x board programmed with the example application (with the instructions
above).
diff --git a/docs/guides/nxp_zephyr_ota_software_update.md b/docs/guides/nxp/nxp_zephyr_ota_software_update.md
similarity index 98%
rename from docs/guides/nxp_zephyr_ota_software_update.md
rename to docs/guides/nxp/nxp_zephyr_ota_software_update.md
index a36ac32..314765a 100644
--- a/docs/guides/nxp_zephyr_ota_software_update.md
+++ b/docs/guides/nxp/nxp_zephyr_ota_software_update.md
@@ -178,8 +178,8 @@
Setup example :
-- [Chip-tool](../../examples/chip-tool/README.md) application running on the
- RPi.
+- [Chip-tool](../../../examples/chip-tool/README.md) application running on
+ the RPi.
- OTA Provider application built on the same RPi (as explained below).
- Board programmed with the example application (with the instructions above).
diff --git a/examples/air-purifier-app/linux/README.md b/examples/air-purifier-app/linux/README.md
index d2352bc..2d771bd 100644
--- a/examples/air-purifier-app/linux/README.md
+++ b/examples/air-purifier-app/linux/README.md
@@ -11,7 +11,8 @@
To cross-compile this example on x64 host and run on **NXP i.MX 8M Mini**
**EVK**, see the associated
-[README document](../../../docs/guides/nxp_imx8m_linux_examples.md) for details.
+[README document](../../../docs/guides/nxp/nxp_imx8m_linux_examples.md) for
+details.
<hr>
diff --git a/examples/air-quality-sensor-app/linux/README.md b/examples/air-quality-sensor-app/linux/README.md
index b1c2e92..ef90a4b 100644
--- a/examples/air-quality-sensor-app/linux/README.md
+++ b/examples/air-quality-sensor-app/linux/README.md
@@ -7,7 +7,8 @@
To cross-compile this example on x64 host and run on **NXP i.MX 8M Mini**
**EVK**, see the associated
-[README document](../../../docs/guides/nxp_imx8m_linux_examples.md) for details.
+[README document](../../../docs/guides/nxp/nxp_imx8m_linux_examples.md) for
+details.
<hr>
diff --git a/examples/all-clusters-app/nxp/linux-imx/imx8m/README.md b/examples/all-clusters-app/nxp/linux-imx/imx8m/README.md
index 9a90a11..e20ff10 100644
--- a/examples/all-clusters-app/nxp/linux-imx/imx8m/README.md
+++ b/examples/all-clusters-app/nxp/linux-imx/imx8m/README.md
@@ -1,4 +1,4 @@
To cross-compile this example on x64 host and run on **NXP i.MX 8M Mini**
**EVK**, see the associated
-[README document](../../../../../docs/guides/nxp_imx8m_linux_examples.md) for
-details.
+[README document](../../../../../docs/guides/nxp/nxp_imx8m_linux_examples.md)
+for details.
diff --git a/examples/all-clusters-app/nxp/rt/rw61x/README.md b/examples/all-clusters-app/nxp/rt/rw61x/README.md
index 8a68899..bdec2c5 100644
--- a/examples/all-clusters-app/nxp/rt/rw61x/README.md
+++ b/examples/all-clusters-app/nxp/rt/rw61x/README.md
@@ -139,16 +139,16 @@
- To build with the option to have Matter certificates/keys pre-loaded in a
specific flash area the argument `chip_with_factory_data=1` must be added to
the _gn gen_ command. (for more information see
- [Guide for writing manufacturing data on NXP devices](../../../../../docs/guides/nxp_manufacturing_flow.md).
+ [Guide for writing manufacturing data on NXP devices](../../../../../docs/guides/nxp/nxp_manufacturing_flow.md).
- To build the application with the OTA Requestor enabled, the arguments
`chip_enable_ota_requestor=true no_mcuboot=false` must be added to the _gn
gen_ command. (More information about the OTA Requestor feature in
- [OTA Requestor README](../../../../../docs/guides/nxp_rw61x_ota_software_update.md)
+ [OTA Requestor README](../../../../../docs/guides/nxp/nxp_rw61x_ota_software_update.md)
## Manufacturing data
See
-[Guide for writing manufacturing data on NXP devices](../../../../../docs/guides/nxp_manufacturing_flow.md)
+[Guide for writing manufacturing data on NXP devices](../../../../../docs/guides/nxp/nxp_manufacturing_flow.md)
Other comments:
@@ -374,4 +374,4 @@
Over-The-Air software updates are supported with the RW61x all-clusters example.
The process to follow in order to perform a software update is described in the
dedicated guide
-['Matter Over-The-Air Software Update with NXP RW61x example applications'](../../../../../docs/guides/nxp_rw61x_ota_software_update.md).
+['Matter Over-The-Air Software Update with NXP RW61x example applications'](../../../../../docs/guides/nxp/nxp_rw61x_ota_software_update.md).
diff --git a/examples/all-clusters-minimal-app/nxp/linux-imx/imx8m/README.md b/examples/all-clusters-minimal-app/nxp/linux-imx/imx8m/README.md
index 9a90a11..e20ff10 100644
--- a/examples/all-clusters-minimal-app/nxp/linux-imx/imx8m/README.md
+++ b/examples/all-clusters-minimal-app/nxp/linux-imx/imx8m/README.md
@@ -1,4 +1,4 @@
To cross-compile this example on x64 host and run on **NXP i.MX 8M Mini**
**EVK**, see the associated
-[README document](../../../../../docs/guides/nxp_imx8m_linux_examples.md) for
-details.
+[README document](../../../../../docs/guides/nxp/nxp_imx8m_linux_examples.md)
+for details.
diff --git a/examples/contact-sensor-app/nxp/k32w/k32w0/README.md b/examples/contact-sensor-app/nxp/k32w/k32w0/README.md
index b7ec329..5ad3192 100644
--- a/examples/contact-sensor-app/nxp/k32w/k32w0/README.md
+++ b/examples/contact-sensor-app/nxp/k32w/k32w0/README.md
@@ -348,7 +348,7 @@
## Manufacturing data
See
-[Guide for writing manufacturing data on NXP devices](../../../../../docs/guides/nxp_manufacturing_flow.md).
+[Guide for writing manufacturing data on NXP devices](../../../../../docs/guides/nxp/nxp_manufacturing_flow.md).
There are factory data generated binaries available in
examples/platform/nxp/k32w/k32w0/scripts/demo_generated_factory_data folder.
diff --git a/examples/contact-sensor-app/nxp/k32w/k32w1/README.md b/examples/contact-sensor-app/nxp/k32w/k32w1/README.md
index 5079e01..f3896a0 100644
--- a/examples/contact-sensor-app/nxp/k32w/k32w1/README.md
+++ b/examples/contact-sensor-app/nxp/k32w/k32w1/README.md
@@ -185,7 +185,7 @@
Use `chip_with_factory_data=1` in the gn build command to enable factory data.
For a full guide on manufacturing flow, please see
-[Guide for writing manufacturing data on NXP devices](../../../../../docs/guides/nxp_manufacturing_flow.md).
+[Guide for writing manufacturing data on NXP devices](../../../../../docs/guides/nxp/nxp_manufacturing_flow.md).
## Flashing
diff --git a/examples/dishwasher-app/linux/README.md b/examples/dishwasher-app/linux/README.md
index 3c8df64..2d3b461 100644
--- a/examples/dishwasher-app/linux/README.md
+++ b/examples/dishwasher-app/linux/README.md
@@ -7,7 +7,8 @@
To cross-compile this example on x64 host and run on **NXP i.MX 8M Mini**
**EVK**, see the associated
-[README document](../../../docs/guides/nxp_imx8m_linux_examples.md) for details.
+[README document](../../../docs/guides/nxp/nxp_imx8m_linux_examples.md) for
+details.
<hr>
diff --git a/examples/energy-management-app/linux/README.md b/examples/energy-management-app/linux/README.md
index 424ef46..f91d341 100644
--- a/examples/energy-management-app/linux/README.md
+++ b/examples/energy-management-app/linux/README.md
@@ -7,7 +7,8 @@
To cross-compile this example on x64 host and run on **NXP i.MX 8M Mini**
**EVK**, see the associated
-[README document](../../../docs/guides/nxp_imx8m_linux_examples.md) for details.
+[README document](../../../docs/guides/nxp/nxp_imx8m_linux_examples.md) for
+details.
<hr>
diff --git a/examples/lighting-app/linux/README.md b/examples/lighting-app/linux/README.md
index ff2c9b1..e41799a 100644
--- a/examples/lighting-app/linux/README.md
+++ b/examples/lighting-app/linux/README.md
@@ -7,7 +7,8 @@
To cross-compile this example on x64 host and run on **NXP i.MX 8M Mini**
**EVK**, see the associated
-[README document](../../../docs/guides/nxp_imx8m_linux_examples.md) for details.
+[README document](../../../docs/guides/nxp/nxp_imx8m_linux_examples.md) for
+details.
<hr>
diff --git a/examples/lighting-app/nxp/k32w/k32w0/README.md b/examples/lighting-app/nxp/k32w/k32w0/README.md
index af43002..106a614 100644
--- a/examples/lighting-app/nxp/k32w/k32w0/README.md
+++ b/examples/lighting-app/nxp/k32w/k32w0/README.md
@@ -323,7 +323,7 @@
## Manufacturing data
See
-[Guide for writing manufacturing data on NXP devices](../../../../../docs/guides/nxp_manufacturing_flow.md).
+[Guide for writing manufacturing data on NXP devices](../../../../../docs/guides/nxp/nxp_manufacturing_flow.md).
There are factory data generated binaries available in
examples/platform/nxp/k32w/k32w0/scripts/demo_generated_factory_data folder.
diff --git a/examples/lighting-app/nxp/k32w/k32w1/README.md b/examples/lighting-app/nxp/k32w/k32w1/README.md
index c44c73a..3bf2ab8 100644
--- a/examples/lighting-app/nxp/k32w/k32w1/README.md
+++ b/examples/lighting-app/nxp/k32w/k32w1/README.md
@@ -187,7 +187,7 @@
Use `chip_with_factory_data=1` in the gn build command to enable factory data.
For a full guide on manufacturing flow, please see
-[Guide for writing manufacturing data on NXP devices](../../../../../docs/guides/nxp_manufacturing_flow.md).
+[Guide for writing manufacturing data on NXP devices](../../../../../docs/guides/nxp/nxp_manufacturing_flow.md).
## Flashing
diff --git a/examples/lighting-app/nxp/linux-imx/imx8m/README.md b/examples/lighting-app/nxp/linux-imx/imx8m/README.md
index 9a90a11..e20ff10 100644
--- a/examples/lighting-app/nxp/linux-imx/imx8m/README.md
+++ b/examples/lighting-app/nxp/linux-imx/imx8m/README.md
@@ -1,4 +1,4 @@
To cross-compile this example on x64 host and run on **NXP i.MX 8M Mini**
**EVK**, see the associated
-[README document](../../../../../docs/guides/nxp_imx8m_linux_examples.md) for
-details.
+[README document](../../../../../docs/guides/nxp/nxp_imx8m_linux_examples.md)
+for details.
diff --git a/examples/refrigerator-app/linux/README.md b/examples/refrigerator-app/linux/README.md
index fc51f2f..a8adfe0 100644
--- a/examples/refrigerator-app/linux/README.md
+++ b/examples/refrigerator-app/linux/README.md
@@ -7,7 +7,8 @@
To cross-compile this example on x64 host and run on **NXP i.MX 8M Mini**
**EVK**, see the associated
-[README document](../../../docs/guides/nxp_imx8m_linux_examples.md) for details.
+[README document](../../../docs/guides/nxp/nxp_imx8m_linux_examples.md) for
+details.
<hr>
diff --git a/examples/thermostat/nxp/linux-imx/imx8m/README.md b/examples/thermostat/nxp/linux-imx/imx8m/README.md
index 9a90a11..e20ff10 100644
--- a/examples/thermostat/nxp/linux-imx/imx8m/README.md
+++ b/examples/thermostat/nxp/linux-imx/imx8m/README.md
@@ -1,4 +1,4 @@
To cross-compile this example on x64 host and run on **NXP i.MX 8M Mini**
**EVK**, see the associated
-[README document](../../../../../docs/guides/nxp_imx8m_linux_examples.md) for
-details.
+[README document](../../../../../docs/guides/nxp/nxp_imx8m_linux_examples.md)
+for details.
diff --git a/examples/thermostat/nxp/linux-se05x/README.md b/examples/thermostat/nxp/linux-se05x/README.md
index 9a90a11..e20ff10 100644
--- a/examples/thermostat/nxp/linux-se05x/README.md
+++ b/examples/thermostat/nxp/linux-se05x/README.md
@@ -1,4 +1,4 @@
To cross-compile this example on x64 host and run on **NXP i.MX 8M Mini**
**EVK**, see the associated
-[README document](../../../../../docs/guides/nxp_imx8m_linux_examples.md) for
-details.
+[README document](../../../../../docs/guides/nxp/nxp_imx8m_linux_examples.md)
+for details.
diff --git a/scripts/tools/nxp/factory_data_generator/README.md b/scripts/tools/nxp/factory_data_generator/README.md
index 38f65d4..0aacaeb 100644
--- a/scripts/tools/nxp/factory_data_generator/README.md
+++ b/scripts/tools/nxp/factory_data_generator/README.md
@@ -1,7 +1,7 @@
# NXP Factory Data Generator
For usage of the tool, please see
-[Guide for writing manufacturing data on NXP devices](../../../../docs/guides/nxp_manufacturing_flow.md).
+[Guide for writing manufacturing data on NXP devices](../../../../docs/guides/nxp/nxp_manufacturing_flow.md).
## Tool implementation
