# Copyright (c) 2021 Project CHIP Authors
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# Auto-generated scripts for harness use only, please review before automation. The endpoints and cluster names are currently set to default

name:
    12.4.5. [TC-CNET-4.5] [Wi-Fi] FAILSAFE_REQUIRED message Validation
    [DUT-Server]

PICS:
    - CNET.S.F00

config:
    nodeId: 0x12344321
    cluster: "Basic Information"
    endpoint: 0

tests:
    - label: "Commission TH and DUT over BLE to setup the Wi-Fi"
      verification: |

      disabled: true

    - label:
          "The cluster Identifier 49 (0x0031) is present in the ServerList
          attribute"
      verification: |

      disabled: true

    - label: "The FeatureMap attribute value is 1"
      verification: |
          ./chip-tool networkcommissioning read feature-map 1 0

          Verify the "feature-map" on the TH(Chip-tool) Log:

          [1653474932.055513][29920:29925] CHIP:TOO: Endpoint: 0 Cluster: 0x0000_0031 Attribute 0x0000_FFFC DataVersion: 1600858167
          [1653474932.055578][29920:29925] CHIP:TOO:   FeatureMap: 1
          [1653474932.055675][29920:29925] CHIP:EM: Sending Standalone Ack for MessageCounter:1494059 on exchange 5482i"
      disabled: true

    - label:
          "TH sends the AddOrUpdateWiFiNetwork command to the DUT with the
          following fields: 1. SSID field set to PIXIT.CNET.WIFI_1S
          T_ACCESSPOINT_SSI D 2. Credentials field set to PIXIT.CNET.WIFI_1S
          T_ACCESSPOINT_CRE DENTIALS 3. Breadcrumb field set to 1"
      PICS: CNET.S.C02.Rsp
      verification: |
          ./chip-tool networkcommissioning add-or-update-wi-fi-network  hex:<your network id in hex> 1 0

          Below is an example:

          ./chip-tool networkcommissioning add-or-update-wi-fi-network hex:47524C50726976617465 grlprivatewifi092010 1 0

          Verify  "FAILSAFE_REQUIRED status code"  on the TH(Chip-tool) Log:

          [1657619600.364023][2056:2061] CHIP:DMG: Received Command Response Status for Endpoint=0 Cluster=0x0000_0031 Command=0x0000_0003 Status=0xca
          [1657619600.364102][2056:2061] CHIP:TOO: Error: IM Error 0x000005CA: General error: 0xca (FAILSAFE_REQUIRED)
          [1657619600.364186][2056:2061] CHIP:DMG: ICR moving to [AwaitingDe]
      disabled: true

    - label:
          "TH sends RemoveNetwork command to the DUT with NetworkID field set to
          PIXIT.CNET.WIFI_1ST_ACCE SSPOINT_SSID and Breadcrumb field set to 1"
      PICS: CNET.S.C02.Rsp
      verification: |
          ./chip-tool networkcommissioning remove hex:<your network id in hex> 1 0

          Below is an example:

          ./chip-tool networkcommissioning remove-network hex:47524C50726976617465 1 0

          Verify  "FAILSAFE_REQUIRED status code"  on the TH(Chip-tool) Log:

          [1657619600.364023][2056:2061] CHIP:DMG: Received Command Response Status for Endpoint=0 Cluster=0x0000_0031 Command=0x0000_0003 Status=0xca
          [1657619600.364102][2056:2061] CHIP:TOO: Error: IM Error 0x000005CA: General error: 0xca (FAILSAFE_REQUIRED)
          [1657619600.364186][2056:2061] CHIP:DMG: ICR moving to [AwaitingDe]
      disabled: true

    - label:
          "TH sends ConnectNetwork command to the DUT with NetworkID field set
          to PIXIT.CNET.WIFI_1ST_ACCE SSPOINT_SSID and Breadcrumb field set to 1"
      PICS: CNET.S.C06.Rsp
      verification: |
          ./chip-tool networkcommissioning connect hex:<your network id in hex> 1 0

          Below is an example:

          ./chip-tool networkcommissioning connect-network hex:47524C50726976617465 1 0

          Verify  "FAILSAFE_REQUIRED status code"  on the TH(Chip-tool) Log:

          [1657619600.364023][2056:2061] CHIP:DMG: Received Command Response Status for Endpoint=0 Cluster=0x0000_0031 Command=0x0000_0003 Status=0xca
          [1657619600.364102][2056:2061] CHIP:TOO: Error: IM Error 0x000005CA: General error: 0xca (FAILSAFE_REQUIRED)
          [1657619600.364186][2056:2061] CHIP:DMG: ICR moving to [AwaitingDe]
      disabled: true