# Copyright (c) 2021 Project CHIP Authors
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

name: 33.1.1. [TC-FLW-1.1] Global attributes with server as DUT

PICS:
    - FLW.S

config:
    nodeId: 0x12344321
    cluster: "Flow Measurement"
    endpoint: 1

tests:
    - label: "Wait for the commissioned device to be retrieved"
      cluster: "DelayCommands"
      command: "WaitForCommissionee"
      arguments:
          values:
              - name: "nodeId"
                value: nodeId

    - label: "Read the global attribute: ClusterRevision"
      PICS: FLW.S.Afffd
      command: "readAttribute"
      attribute: "ClusterRevision"
      response:
          value: 3
          constraints:
              type: int16u

    - label: "Read the global attribute: FeatureMap"
      PICS: FLW.S.Afffc
      command: "readAttribute"
      attribute: "FeatureMap"
      response:
          value: 0
          constraints:
              type: bitmap32

    - label: "Read the global attribute: AttributeList"
      PICS: FLW.S.Afffb
      command: "readAttribute"
      attribute: "AttributeList"
      response:
          constraints:
              type: list
              contains: [0, 1, 2, 65528, 65529, 65530, 65531, 65532, 65533]

    - label: "Read the optional attribute(Tolerance) in AttributeList"
      PICS: FLW.S.A0003 && FLW.S.Afffb
      command: "readAttribute"
      attribute: "AttributeList"
      response:
          constraints:
              type: list
              contains: [3]

    #List values range check support https://github.com/project-chip/connectedhomeip/issues/26570
    - label:
          "TH reads AttributeList attribute from DUT. 1.The list SHALL NOT
          contain any additional values in the standard or scoped range:
          (0x0000_0000 - 0x0000_4FFF) and (0x0000_F000 - 0x0000_FFFE) 2.The list
          MAY contain values in the Manufacturer Extensible Identifier (MEI)
          range: (0xXXXX_0000 - 0xXXXX_4FFF), where XXXX is the allowed MEI
          range (0x0001 - 0xFFF1), these values SHALL be ignored. 3.The list
          SHALL NOT contain any values in the Test Vendor or invalid range:
          (0x0000_5000 - 0x0000_EFFF and 0x0000_FFFF), (0xXXXX_5000 -
          0xXXXX_FFFF) and (0xFFF1_0000 - 0xFFFF_FFFF), where XXXX is the
          allowed MEI range (0x0001 - 0xFFF1)"
      verification: |
          ./chip-tool flowmeasurement read  attribute-list 1 1

          Verify " AttributeList " value consists the list of mandatory attributes (0, 1, 2), global attributes (65528, 65529, 65530, 65531, 65532, 65533) and if DUT supports it lists optional attribute (value 3 ) in RPI on the TH(Chip-tool) Log:

          [1676283744.634470][6703:6705] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0404 Attribute 0x0000_FFFB DataVersion: 1355474720
          [1676283744.634550][6703:6705] CHIP:TOO:   AttributeList: 10 entries
          [1676283744.634571][6703:6705] CHIP:TOO:     [1]: 0
          [1676283744.634585][6703:6705] CHIP:TOO:     [2]: 1
          [1676283744.634597][6703:6705] CHIP:TOO:     [3]: 2
          [1676283744.634611][6703:6705] CHIP:TOO:     [4]: 3
          [1676283744.634625][6703:6705] CHIP:TOO:     [5]: 65528
          [1676283744.634639][6703:6705] CHIP:TOO:     [6]: 65529
          [1676283744.634653][6703:6705] CHIP:TOO:     [7]: 65530
          [1676283744.634667][6703:6705] CHIP:TOO:     [8]: 65531
          [1676283744.634681][6703:6705] CHIP:TOO:     [9]: 65532
          [1676283744.634695][6703:6705] CHIP:TOO:     [10]: 65533
          [1676283744.634854][6703:6705] CHIP:EM: <<< [E:1353i M:55876299 (Ack:134302507)] (S) Msg TX to 1:00000000
      cluster: "LogCommands"
      command: "UserPrompt"
      PICS: PICS_USER_PROMPT && FLW.S.Afffb
      arguments:
          values:
              - name: "message"
                value: "Please enter 'y' for success"
              - name: "expectedValue"
                value: "y"

    - label:
          "TH reads EventList attribute from DUT. 1.The list MAY contain values
          in the Manufacturer Extensible Identifier (MEI) range: (0xXXXX_0000 -
          0xXXXX_00FF), where XXXX is the allowed MEI range (0x0001 - 0xFFF1),
          these values SHALL be ignored. 2.The list SHALL NOT contain any values
          in the Test Vendor or invalid range: (0x0000_0100 - 0x0000_FFFF),
          (0xXXXX_0100 - 0xXXXX_FFFF) and (0xFFF1_0000 - 0xFFFF_FFFF), where
          XXXX is the allowed MEI range (0x0001 - 0xFFF1)"
      verification: |
          ./chip-tool flowmeasurement read event-list 1 1

          Verify "EventList " consists the list of supported events, Also verify that the DUT response with an empty list (0 entries) if there is no events on the TH(Chip-tool) Log:

          [1676363157.137814][9032:9034] CHIP:DMG: }
          [1676363157.137855][9032:9034] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0404 Attribute 0x0000_FFFA DataVersion: 2916521407
          [1676363157.137868][9032:9034] CHIP:TOO:   EventList: 0 entries
      cluster: "LogCommands"
      command: "UserPrompt"
      PICS: PICS_USER_PROMPT && FLW.S.Afffa
      arguments:
          values:
              - name: "message"
                value: "Please enter 'y' for success"
              - name: "expectedValue"
                value: "y"

    - label:
          "TH reads AcceptedCommandList attribute from DUT. 1.The list SHALL NOT
          contain any additional values in the standard or scoped range:
          (0x0000_0000 - 0x0000_00FF). 2.The list MAY contain values in the
          Manufacturer Extensible Identifier (MEI) range: (0xXXXX_0000 -
          0xXXXX_00FF), where XXXX is the allowed MEI range (0x0001 - 0xFFF1),
          these values SHALL be ignored.3.The list SHALL NOT contain any values
          in the Test Vendor or invalid range: (0x0000_0100 - 0x0000_FFFF),
          (0xXXXX_0100 - 0xXXXX_FFFF) and (0xFFF1_0000 - 0xFFFF_FFFF), where
          XXXX is the allowed MEI range (0x0001 - 0xFFF1)"
      verification: |
          ./chip-tool flowmeasurement read accepted-command-list 1 1

          Verify "AcceptedCommandList " consists the list of supported commands, Also verify that the DUT response with an empty list (0 entries) if there is no accepted command on the TH(Chip-tool) Log:

          [1676360099.158978][8526:8528] CHIP:DMG: }
          [1676360099.159130][8526:8528] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0404 Attribute 0x0000_FFF9 DataVersion: 2916521407
          [1676360099.159185][8526:8528] CHIP:TOO:   AcceptedCommandList: 0 entries
      cluster: "LogCommands"
      command: "UserPrompt"
      PICS: PICS_USER_PROMPT && FLW.S.Afff9
      arguments:
          values:
              - name: "message"
                value: "Please enter 'y' for success"
              - name: "expectedValue"
                value: "y"

    - label:
          "TH reads GeneratedCommandList attribute from DUT. 1.The list MAY
          contain values in the Manufacturer Extensible Identifier (MEI) range:
          (0xXXXX_0000 - 0xXXXX_00FF), where XXXX is the allowed MEI range
          (0x0001 - 0xFFF1), these values SHALL be ignored. 2.The list SHALL NOT
          contain any values in the Test Vendor or invalid range: (0x0000_0100 -
          0x0000_FFFF), (0xXXXX_0100 - 0xXXXX_FFFF) and (0xFFF1_0000 -
          0xFFFF_FFFF), where XXXX is the allowed MEI range (0x0001 - 0xFFF1)"
      verification: |
          ./chip-tool flowmeasurement read generated-command-list 1 1

          Verify " GeneratedCommandList " consists the list of supported commands, Also verify that the DUT response with an empty list (0 entries) if there is no generated command on the TH(Chip-tool) Log:

          [1676360138.548225][8539:8541] CHIP:DMG: }
          [1676360138.548265][8539:8541] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0404 Attribute 0x0000_FFF8 DataVersion: 2916521407
          [1676360138.548281][8539:8541] CHIP:TOO:   GeneratedCommandList: 0 entries
      cluster: "LogCommands"
      command: "UserPrompt"
      PICS: PICS_USER_PROMPT && FLW.S.Afff8
      arguments:
          values:
              - name: "message"
                value: "Please enter 'y' for success"
              - name: "expectedValue"
                value: "y"