# Copyright (c) 2021 Project CHIP Authors
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# Auto-generated scripts for harness use only, please review before automation. The endpoints and cluster names are currently set to default

name:
    3.2.2. [TC-SU-2.2] Handling different QueryImageResponse scenarios on
    Requestor

PICS:
    - MCORE.OTA.Requestor

config:
    nodeId: 0x12344321
    cluster: "Basic Information"
    endpoint: 0

tests:
    - label:
          "DUT sends a QueryImage command to the TH/OTA-P. TH/OTA-P sends a
          QueryImageResponse back to DUT. QueryStatus is set to
          'UpdateAvailable' Set ImageURI to the location where the image is
          located."
      verification: |
          Run the OTA Provider App using the command:

          ./chip-ota-provider-app --discriminator ${PROVIDER_LONG_DISCRIMINATOR} --secured-device-port ${PROVIDER_UDP_PORT} --KVS ${KVS_STORE_LOCATION} --filepath ${SW_IMAGE_FILE} -q updateAvailable

          ./chip-tool otasoftwareupdaterequestor announce-otaprovider 0xDEADBEEF 0 0 0 0x1234567890 0

          where 0x1234567890 is OTA Requestor node ID and 0xDEADBEEF is OTA Provider node ID

          Verify that the transfer of the software image happens all the way until the last Block is acknowledged on the OTA Provider logs:

          [1645748688025] [99779:20370762] CHIP: [BDX] OutputEvent type: AckEOFReceived
          [1645748688025] [99779:20370762] CHIP: [BDX] Transfer completed, got AckEOF
      disabled: true

    - label:
          "DUT sends a QueryImage command to the TH/OTA-P. TH/OTA-P sends a
          QueryImageResponse back to DUT. QueryStatus is set to 'Busy',
          DelayedActionTime is set to 60 seconds."
      verification: |
          Run the OTA Provider App using the command:

          ./chip-ota-provider-app --discriminator ${PROVIDER_LONG_DISCRIMINATOR} --secured-device-port ${PROVIDER_UDP_PORT} --KVS ${KVS_STORE_LOCATION} --filepath ${SW_IMAGE_FILE} -q busy -t 60

          ./chip-tool otasoftwareupdaterequestor announce-otaprovider 0xDEADBEEF 0 0 0 0x1234567890 0

          where 0x1234567890 is OTA Requestor node ID and 0xDEADBEEF is OTA Provider node ID

          Verify that the DUT does not send a QueryImage command before the minimum interval defined by spec which is 2 minutes (120 seconds) from the last QueryImage command.
      disabled: true

    - label:
          "DUT sends a QueryImage command to the TH/OTA-P. TH/OTA-P sends a
          QueryImageResponse back to DUT. QueryStatus is set to 'NotAvailable'."
      verification: |
          Run the OTA Provider App using the command:


          ./chip-ota-provider-app --discriminator ${PROVIDER_LONG_DISCRIMINATOR} --secured-device-port ${PROVIDER_UDP_PORT} --KVS ${KVS_STORE_LOCATION} --filepath ${SW_IMAGE_FILE} -q updateNotAvailable -t 60

          ./chip-tool otasoftwareupdaterequestor announce-otaprovider 0xDEADBEEF 0 0 0 0x1234567890 0

          where 0x1234567890 is OTA Requestor node ID and 0xDEADBEEF is OTA Provider node ID

          Verify that the DUT does not send a QueryImage command before the minimum interval defined by spec which is 2 minutes (120 seconds) from the last QueryImage command.
      disabled: true

    - label:
          "DUT sends a QueryImage command to the TH/OTA-P. TH/OTA-P sends a
          QueryImageResponse back to DUT. QueryStatus is set to Busy, Set
          DelayedActionTime to 3 minutes. On the subsequent QueryImage command,
          TH/OTA-P sends a QueryImageResponse back to DUT. QueryStatus is set to
          'UpdateAvailable'."
      verification: |
          Run the OTA Provider App using the command:

          ./chip-ota-provider-app --discriminator ${PROVIDER_LONG_DISCRIMINATOR} --secured-device-port ${PROVIDER_UDP_PORT} --KVS ${KVS_STORE_LOCATION} --filepath ${SW_IMAGE_FILE} -q busy -t 180

          ./chip-tool otasoftwareupdaterequestor announce-otaprovider 0xDEADBEEF 0 0 0 0x1234567890 0

          where 0x1234567890 is OTA Requestor node ID and 0xDEADBEEF is OTA Provider node ID

          Verify that the DUT waits for the time mentioned in the DelayedActionTime (3 minutes) before issuing another QueryImage command to the TH/OTA-P.
          Verify there is a transfer of the software image after the second QueryImageResponse with UpdateAvailable status from the TH/OTA-P to the DUT.
      disabled: true

    - label:
          "DUT sends a QueryImage command to the TH/OTA-P. TH/OTA-P sends a
          QueryImageResponse back to DUT. QueryStatus is set to
          'UpdateAvailable', ImageURI should have the https url from where the
          image can be downloaded."
      PICS: MCORE.OTA.HTTPS
      verification: |
          Out of scope for V1.0
      disabled: true

    - label:
          "DUT sends a QueryImage command to the TH/OTA-P. TH/OTA-P sends a
          QueryImageResponse back to DUT. QueryStatus is set to
          'UpdateAvailable', Software Version should be set to the same or an
          older (numerically lower) version."
      verification: |
          Run the OTA Provider App using the command:

          ./chip-ota-provider-app --discriminator ${PROVIDER_LONG_DISCRIMINATOR} --secured-device-port ${PROVIDER_UDP_PORT} --KVS ${KVS_STORE_LOCATION} --filepath ${SW_IMAGE_FILE}

          Software Version of the SW_IMAGE_FILE used in above command should be the same or an older (numerically lower) version than the DUT.

          ./chip-tool otasoftwareupdaterequestor announce-otaprovider 0xDEADBEEF 0 0 0 0x1234567890 0

          where 0x1234567890 is OTA Requestor node ID and 0xDEADBEEF is OTA Provider node ID

          Verify that the DUT does not start transferring the software image.
      disabled: true

    - label:
          "DUT sends a QueryImage command to the TH/OTA-P. TH/OTA-P sends a
          QueryImageResponse back to DUT. QueryStatus is set to
          'UpdateAvailable', ImageURI field contains an invalid BDX ImageURI."
      verification: |
          Run the OTA Provider App using the command:

          ./chip-ota-provider-app --discriminator ${PROVIDER_LONG_DISCRIMINATOR} --secured-device-port ${PROVIDER_UDP_PORT} --KVS ${KVS_STORE_LOCATION} --filepath ${SW_IMAGE_FILE} -i bdx://0000000000000001

          ./chip-tool otasoftwareupdaterequestor announce-otaprovider 0xDEADBEEF 0 0 0 0x1234567890 0

          where 0x1234567890 is OTA Requestor node ID and 0xDEADBEEF is OTA Provider node ID

          Verify that the DUT does not start transferring the software image.
      disabled: true