| /* |
| * |
| * Copyright (c) 2022 Project CHIP Authors |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| // THIS FILE IS GENERATED BY ZAP |
| |
| // Prevent multiple inclusion |
| #pragma once |
| |
| // Global cluster attribute ids |
| #define ZCL_GENERATED_COMMAND_LIST_ATTRIBUTE_ID (0xFFF8) |
| #define ZCL_ACCEPTED_COMMAND_LIST_ATTRIBUTE_ID (0xFFF9) |
| #define ZCL_ATTRIBUTE_LIST_SERVER_ATTRIBUTE_ID (0xFFFB) |
| #define ZCL_FEATURE_MAP_CLIENT_ATTRIBUTE_ID (0xFFFC) |
| #define ZCL_FEATURE_MAP_SERVER_ATTRIBUTE_ID (0xFFFC) |
| #define ZCL_CLUSTER_REVISION_CLIENT_ATTRIBUTE_ID (0xFFFD) |
| #define ZCL_CLUSTER_REVISION_SERVER_ATTRIBUTE_ID (0xFFFD) |
| |
| // Attribute ids for cluster: Identify |
| |
| // Client attributes |
| |
| // Server attributes |
| #define ZCL_IDENTIFY_TIME_ATTRIBUTE_ID (0x0000) |
| #define ZCL_IDENTIFY_TYPE_ATTRIBUTE_ID (0x0001) |
| |
| // Attribute ids for cluster: Groups |
| |
| // Client attributes |
| |
| // Server attributes |
| #define ZCL_GROUP_NAME_SUPPORT_ATTRIBUTE_ID (0x0000) |
| |
| // Attribute ids for cluster: Scenes |
| |
| // Client attributes |
| |
| // Server attributes |
| #define ZCL_SCENE_COUNT_ATTRIBUTE_ID (0x0000) |
| #define ZCL_CURRENT_SCENE_ATTRIBUTE_ID (0x0001) |
| #define ZCL_CURRENT_GROUP_ATTRIBUTE_ID (0x0002) |
| #define ZCL_SCENE_VALID_ATTRIBUTE_ID (0x0003) |
| #define ZCL_SCENE_NAME_SUPPORT_ATTRIBUTE_ID (0x0004) |
| #define ZCL_LAST_CONFIGURED_BY_ATTRIBUTE_ID (0x0005) |
| |
| // Attribute ids for cluster: On/Off |
| |
| // Client attributes |
| |
| // Server attributes |
| #define ZCL_ON_OFF_ATTRIBUTE_ID (0x0000) |
| #define ZCL_GLOBAL_SCENE_CONTROL_ATTRIBUTE_ID (0x4000) |
| #define ZCL_ON_TIME_ATTRIBUTE_ID (0x4001) |
| #define ZCL_OFF_WAIT_TIME_ATTRIBUTE_ID (0x4002) |
| #define ZCL_START_UP_ON_OFF_ATTRIBUTE_ID (0x4003) |
| |
| // Attribute ids for cluster: On/off Switch Configuration |
| |
| // Client attributes |
| |
| // Server attributes |
| #define ZCL_SWITCH_TYPE_ATTRIBUTE_ID (0x0000) |
| #define ZCL_SWITCH_ACTIONS_ATTRIBUTE_ID (0x0010) |
| |
| // Attribute ids for cluster: Level Control |
| |
| // Client attributes |
| |
| // Server attributes |
| #define ZCL_CURRENT_LEVEL_ATTRIBUTE_ID (0x0000) |
| #define ZCL_LEVEL_CONTROL_REMAINING_TIME_ATTRIBUTE_ID (0x0001) |
| #define ZCL_MINIMUM_LEVEL_ATTRIBUTE_ID (0x0002) |
| #define ZCL_MAXIMUM_LEVEL_ATTRIBUTE_ID (0x0003) |
| #define ZCL_CURRENT_FREQUENCY_ATTRIBUTE_ID (0x0004) |
| #define ZCL_MIN_FREQUENCY_ATTRIBUTE_ID (0x0005) |
| #define ZCL_MAX_FREQUENCY_ATTRIBUTE_ID (0x0006) |
| #define ZCL_OPTIONS_ATTRIBUTE_ID (0x000F) |
| #define ZCL_ON_OFF_TRANSITION_TIME_ATTRIBUTE_ID (0x0010) |
| #define ZCL_ON_LEVEL_ATTRIBUTE_ID (0x0011) |
| #define ZCL_ON_TRANSITION_TIME_ATTRIBUTE_ID (0x0012) |
| #define ZCL_OFF_TRANSITION_TIME_ATTRIBUTE_ID (0x0013) |
| #define ZCL_DEFAULT_MOVE_RATE_ATTRIBUTE_ID (0x0014) |
| #define ZCL_START_UP_CURRENT_LEVEL_ATTRIBUTE_ID (0x4000) |
| |
| // Attribute ids for cluster: Binary Input (Basic) |
| |
| // Client attributes |
| |
| // Server attributes |
| #define ZCL_ACTIVE_TEXT_ATTRIBUTE_ID (0x0004) |
| #define ZCL_DESCRIPTION_ATTRIBUTE_ID (0x001C) |
| #define ZCL_INACTIVE_TEXT_ATTRIBUTE_ID (0x002E) |
| #define ZCL_OUT_OF_SERVICE_ATTRIBUTE_ID (0x0051) |
| #define ZCL_POLARITY_ATTRIBUTE_ID (0x0054) |
| #define ZCL_PRESENT_VALUE_ATTRIBUTE_ID (0x0055) |
| #define ZCL_RELIABILITY_ATTRIBUTE_ID (0x0067) |
| #define ZCL_STATUS_FLAGS_ATTRIBUTE_ID (0x006F) |
| #define ZCL_APPLICATION_TYPE_ATTRIBUTE_ID (0x0100) |
| |
| // Attribute ids for cluster: Pulse Width Modulation |
| |
| // Client attributes |
| |
| // Server attributes |
| |
| // Attribute ids for cluster: Descriptor |
| |
| // Client attributes |
| |
| // Server attributes |
| #define ZCL_DEVICE_LIST_ATTRIBUTE_ID (0x0000) |
| #define ZCL_SERVER_LIST_ATTRIBUTE_ID (0x0001) |
| #define ZCL_CLIENT_LIST_ATTRIBUTE_ID (0x0002) |
| #define ZCL_PARTS_LIST_ATTRIBUTE_ID (0x0003) |
| |
| // Attribute ids for cluster: Binding |
| |
| // Client attributes |
| |
| // Server attributes |
| #define ZCL_BINDING_LIST_ATTRIBUTE_ID (0x0000) |
| |
| // Attribute ids for cluster: Access Control |
| |
| // Client attributes |
| |
| // Server attributes |
| #define ZCL_ACL_ATTRIBUTE_ID (0x0000) |
| #define ZCL_EXTENSION_ATTRIBUTE_ID (0x0001) |
| #define ZCL_SUBJECTS_PER_ACCESS_CONTROL_ENTRY_ATTRIBUTE_ID (0x0002) |
| #define ZCL_TARGETS_PER_ACCESS_CONTROL_ENTRY_ATTRIBUTE_ID (0x0003) |
| #define ZCL_ACCESS_CONTROL_ENTRIES_PER_FABRIC_ATTRIBUTE_ID (0x0004) |
| |
| // Attribute ids for cluster: Actions |
| |
| // Client attributes |
| |
| // Server attributes |
| #define ZCL_ACTION_LIST_ATTRIBUTE_ID (0x0000) |
| #define ZCL_ENDPOINT_LIST_ATTRIBUTE_ID (0x0001) |
| #define ZCL_SETUP_URL_ATTRIBUTE_ID (0x0002) |
| |
| // Attribute ids for cluster: Basic Information |
| |
| // Client attributes |
| |
| // Server attributes |
| #define ZCL_DATA_MODEL_REVISION_ATTRIBUTE_ID (0x0000) |
| #define ZCL_VENDOR_NAME_ATTRIBUTE_ID (0x0001) |
| #define ZCL_VENDOR_ID_ATTRIBUTE_ID (0x0002) |
| #define ZCL_PRODUCT_NAME_ATTRIBUTE_ID (0x0003) |
| #define ZCL_PRODUCT_ID_ATTRIBUTE_ID (0x0004) |
| #define ZCL_NODE_LABEL_ATTRIBUTE_ID (0x0005) |
| #define ZCL_LOCATION_ATTRIBUTE_ID (0x0006) |
| #define ZCL_HARDWARE_VERSION_ATTRIBUTE_ID (0x0007) |
| #define ZCL_HARDWARE_VERSION_STRING_ATTRIBUTE_ID (0x0008) |
| #define ZCL_SOFTWARE_VERSION_ATTRIBUTE_ID (0x0009) |
| #define ZCL_SOFTWARE_VERSION_STRING_ATTRIBUTE_ID (0x000A) |
| #define ZCL_MANUFACTURING_DATE_ATTRIBUTE_ID (0x000B) |
| #define ZCL_PART_NUMBER_ATTRIBUTE_ID (0x000C) |
| #define ZCL_PRODUCT_URL_ATTRIBUTE_ID (0x000D) |
| #define ZCL_PRODUCT_LABEL_ATTRIBUTE_ID (0x000E) |
| #define ZCL_SERIAL_NUMBER_ATTRIBUTE_ID (0x000F) |
| #define ZCL_LOCAL_CONFIG_DISABLED_ATTRIBUTE_ID (0x0010) |
| #define ZCL_REACHABLE_ATTRIBUTE_ID (0x0011) |
| #define ZCL_UNIQUE_ID_ATTRIBUTE_ID (0x0012) |
| #define ZCL_CAPABILITY_MINIMA_ATTRIBUTE_ID (0x0013) |
| |
| // Attribute ids for cluster: OTA Software Update Provider |
| |
| // Client attributes |
| |
| // Server attributes |
| |
| // Attribute ids for cluster: OTA Software Update Requestor |
| |
| // Client attributes |
| |
| // Server attributes |
| #define ZCL_DEFAULT_OTA_PROVIDERS_ATTRIBUTE_ID (0x0000) |
| #define ZCL_UPDATE_POSSIBLE_ATTRIBUTE_ID (0x0001) |
| #define ZCL_UPDATE_STATE_ATTRIBUTE_ID (0x0002) |
| #define ZCL_UPDATE_STATE_PROGRESS_ATTRIBUTE_ID (0x0003) |
| |
| // Attribute ids for cluster: Localization Configuration |
| |
| // Client attributes |
| |
| // Server attributes |
| #define ZCL_ACTIVE_LOCALE_ATTRIBUTE_ID (0x0000) |
| #define ZCL_SUPPORTED_LOCALES_ATTRIBUTE_ID (0x0001) |
| |
| // Attribute ids for cluster: Time Format Localization |
| |
| // Client attributes |
| |
| // Server attributes |
| #define ZCL_HOUR_FORMAT_ATTRIBUTE_ID (0x0000) |
| #define ZCL_ACTIVE_CALENDAR_TYPE_ATTRIBUTE_ID (0x0001) |
| #define ZCL_SUPPORTED_CALENDAR_TYPES_ATTRIBUTE_ID (0x0002) |
| |
| // Attribute ids for cluster: Unit Localization |
| |
| // Client attributes |
| |
| // Server attributes |
| #define ZCL_TEMPERATURE_UNIT_ATTRIBUTE_ID (0x0000) |
| |
| // Attribute ids for cluster: Power Source Configuration |
| |
| // Client attributes |
| |
| // Server attributes |
| #define ZCL_SOURCES_ATTRIBUTE_ID (0x0000) |
| |
| // Attribute ids for cluster: Power Source |
| |
| // Client attributes |
| |
| // Server attributes |
| #define ZCL_POWER_SOURCE_STATUS_ATTRIBUTE_ID (0x0000) |
| #define ZCL_POWER_SOURCE_ORDER_ATTRIBUTE_ID (0x0001) |
| #define ZCL_POWER_SOURCE_DESCRIPTION_ATTRIBUTE_ID (0x0002) |
| #define ZCL_POWER_SOURCE_WIRED_ASSESSED_INPUT_VOLTAGE_ATTRIBUTE_ID (0x0003) |
| #define ZCL_POWER_SOURCE_WIRED_ASSESSED_INPUT_FREQUENCY_ATTRIBUTE_ID (0x0004) |
| #define ZCL_POWER_SOURCE_WIRED_CURRENT_TYPE_ATTRIBUTE_ID (0x0005) |
| #define ZCL_POWER_SOURCE_WIRED_ASSESSED_CURRENT_ATTRIBUTE_ID (0x0006) |
| #define ZCL_POWER_SOURCE_WIRED_NOMINAL_VOLTAGE_ATTRIBUTE_ID (0x0007) |
| #define ZCL_POWER_SOURCE_WIRED_MAXIMUM_CURRENT_ATTRIBUTE_ID (0x0008) |
| #define ZCL_POWER_SOURCE_WIRED_PRESENT_ATTRIBUTE_ID (0x0009) |
| #define ZCL_POWER_SOURCE_ACTIVE_WIRED_FAULTS_ATTRIBUTE_ID (0x000A) |
| #define ZCL_POWER_SOURCE_BAT_VOLTAGE_ATTRIBUTE_ID (0x000B) |
| #define ZCL_POWER_SOURCE_BAT_PERCENT_REMAINING_ATTRIBUTE_ID (0x000C) |
| #define ZCL_POWER_SOURCE_BAT_TIME_REMAINING_ATTRIBUTE_ID (0x000D) |
| #define ZCL_POWER_SOURCE_BAT_CHARGE_LEVEL_ATTRIBUTE_ID (0x000E) |
| #define ZCL_POWER_SOURCE_BAT_REPLACEMENT_NEEDED_ATTRIBUTE_ID (0x000F) |
| #define ZCL_POWER_SOURCE_BAT_REPLACEABILITY_ATTRIBUTE_ID (0x0010) |
| #define ZCL_POWER_SOURCE_BAT_PRESENT_ATTRIBUTE_ID (0x0011) |
| #define ZCL_POWER_SOURCE_ACTIVE_BAT_FAULTS_ATTRIBUTE_ID (0x0012) |
| #define ZCL_POWER_SOURCE_BAT_REPLACEMENT_DESCRIPTION_ATTRIBUTE_ID (0x0013) |
| #define ZCL_POWER_SOURCE_BAT_COMMON_DESIGNATION_ATTRIBUTE_ID (0x0014) |
| #define ZCL_POWER_SOURCE_BAT_ANSI_DESIGNATION_ATTRIBUTE_ID (0x0015) |
| #define ZCL_POWER_SOURCE_BAT_IEC_DESIGNATION_ATTRIBUTE_ID (0x0016) |
| #define ZCL_POWER_SOURCE_BAT_APPROVED_CHEMISTRY_ATTRIBUTE_ID (0x0017) |
| #define ZCL_POWER_SOURCE_BAT_CAPACITY_ATTRIBUTE_ID (0x0018) |
| #define ZCL_POWER_SOURCE_BAT_QUANTITY_ATTRIBUTE_ID (0x0019) |
| #define ZCL_POWER_SOURCE_BAT_CHARGE_STATE_ATTRIBUTE_ID (0x001A) |
| #define ZCL_POWER_SOURCE_BAT_TIME_TO_FULL_CHARGE_ATTRIBUTE_ID (0x001B) |
| #define ZCL_POWER_SOURCE_BAT_FUNCTIONAL_WHILE_CHARGING_ATTRIBUTE_ID (0x001C) |
| #define ZCL_POWER_SOURCE_BAT_CHARGING_CURRENT_ATTRIBUTE_ID (0x001D) |
| #define ZCL_POWER_SOURCE_ACTIVE_BAT_CHARGE_FAULTS_ATTRIBUTE_ID (0x001E) |
| |
| // Attribute ids for cluster: General Commissioning |
| |
| // Client attributes |
| |
| // Server attributes |
| #define ZCL_BREADCRUMB_ATTRIBUTE_ID (0x0000) |
| #define ZCL_BASIC_COMMISSIONING_INFO_ATTRIBUTE_ID (0x0001) |
| #define ZCL_REGULATORY_CONFIG_ATTRIBUTE_ID (0x0002) |
| #define ZCL_LOCATION_CAPABILITY_ATTRIBUTE_ID (0x0003) |
| #define ZCL_SUPPORTS_CONCURRENT_CONNECTION_ATTRIBUTE_ID (0x0004) |
| |
| // Attribute ids for cluster: Network Commissioning |
| |
| // Client attributes |
| |
| // Server attributes |
| #define ZCL_MAX_NETWORKS_ATTRIBUTE_ID (0x0000) |
| #define ZCL_NETWORKS_ATTRIBUTE_ID (0x0001) |
| #define ZCL_SCAN_MAX_TIME_SECONDS_ATTRIBUTE_ID (0x0002) |
| #define ZCL_CONNECT_MAX_TIME_SECONDS_ATTRIBUTE_ID (0x0003) |
| #define ZCL_INTERFACE_ENABLED_ATTRIBUTE_ID (0x0004) |
| #define ZCL_LAST_NETWORKING_STATUS_ATTRIBUTE_ID (0x0005) |
| #define ZCL_LAST_NETWORK_ID_ATTRIBUTE_ID (0x0006) |
| #define ZCL_LAST_CONNECT_ERROR_VALUE_ATTRIBUTE_ID (0x0007) |
| |
| // Attribute ids for cluster: Diagnostic Logs |
| |
| // Client attributes |
| |
| // Server attributes |
| |
| // Attribute ids for cluster: General Diagnostics |
| |
| // Client attributes |
| |
| // Server attributes |
| #define ZCL_NETWORK_INTERFACES_ATTRIBUTE_ID (0x0000) |
| #define ZCL_REBOOT_COUNT_ATTRIBUTE_ID (0x0001) |
| #define ZCL_UP_TIME_ATTRIBUTE_ID (0x0002) |
| #define ZCL_TOTAL_OPERATIONAL_HOURS_ATTRIBUTE_ID (0x0003) |
| #define ZCL_BOOT_REASONS_ATTRIBUTE_ID (0x0004) |
| #define ZCL_ACTIVE_HARDWARE_FAULTS_ATTRIBUTE_ID (0x0005) |
| #define ZCL_ACTIVE_RADIO_FAULTS_ATTRIBUTE_ID (0x0006) |
| #define ZCL_ACTIVE_NETWORK_FAULTS_ATTRIBUTE_ID (0x0007) |
| #define ZCL_TEST_EVENT_TRIGGERS_ENABLED_ATTRIBUTE_ID (0x0008) |
| |
| // Attribute ids for cluster: Software Diagnostics |
| |
| // Client attributes |
| |
| // Server attributes |
| #define ZCL_THREAD_METRICS_ATTRIBUTE_ID (0x0000) |
| #define ZCL_CURRENT_HEAP_FREE_ATTRIBUTE_ID (0x0001) |
| #define ZCL_CURRENT_HEAP_USED_ATTRIBUTE_ID (0x0002) |
| #define ZCL_CURRENT_HEAP_HIGH_WATERMARK_ATTRIBUTE_ID (0x0003) |
| |
| // Attribute ids for cluster: Thread Network Diagnostics |
| |
| // Client attributes |
| |
| // Server attributes |
| #define ZCL_CHANNEL_ATTRIBUTE_ID (0x0000) |
| #define ZCL_ROUTING_ROLE_ATTRIBUTE_ID (0x0001) |
| #define ZCL_NETWORK_NAME_ATTRIBUTE_ID (0x0002) |
| #define ZCL_DIAG_PAN_ID_ATTRIBUTE_ID (0x0003) |
| #define ZCL_DIAG_EXTENDED_PAN_ID_ATTRIBUTE_ID (0x0004) |
| #define ZCL_MESH_LOCAL_PREFIX_ATTRIBUTE_ID (0x0005) |
| #define ZCL_DIAG_OVERRUN_COUNT_ATTRIBUTE_ID (0x0006) |
| #define ZCL_NEIGHBOR_TABLE_ATTRIBUTE_ID (0x0007) |
| #define ZCL_ROUTE_TABLE_ATTRIBUTE_ID (0x0008) |
| #define ZCL_PARTITION_ID_ATTRIBUTE_ID (0x0009) |
| #define ZCL_WEIGHTING_ATTRIBUTE_ID (0x000A) |
| #define ZCL_DATA_VERSION_ATTRIBUTE_ID (0x000B) |
| #define ZCL_STABLE_DATA_VERSION_ATTRIBUTE_ID (0x000C) |
| #define ZCL_LEADER_ROUTER_ID_ATTRIBUTE_ID (0x000D) |
| #define ZCL_DETACHED_ROLE_COUNT_ATTRIBUTE_ID (0x000E) |
| #define ZCL_CHILD_ROLE_COUNT_ATTRIBUTE_ID (0x000F) |
| #define ZCL_ROUTER_ROLE_COUNT_ATTRIBUTE_ID (0x0010) |
| #define ZCL_LEADER_ROLE_COUNT_ATTRIBUTE_ID (0x0011) |
| #define ZCL_ATTACH_ATTEMPT_COUNT_ATTRIBUTE_ID (0x0012) |
| #define ZCL_PARTITION_ID_CHANGE_COUNT_ATTRIBUTE_ID (0x0013) |
| #define ZCL_BETTER_PARTITION_ATTACH_ATTEMPT_COUNT_ATTRIBUTE_ID (0x0014) |
| #define ZCL_PARENT_CHANGE_COUNT_ATTRIBUTE_ID (0x0015) |
| #define ZCL_TX_TOTAL_COUNT_ATTRIBUTE_ID (0x0016) |
| #define ZCL_TX_UNICAST_COUNT_ATTRIBUTE_ID (0x0017) |
| #define ZCL_TX_BROADCAST_COUNT_ATTRIBUTE_ID (0x0018) |
| #define ZCL_TX_ACK_REQUESTED_COUNT_ATTRIBUTE_ID (0x0019) |
| #define ZCL_TX_ACKED_COUNT_ATTRIBUTE_ID (0x001A) |
| #define ZCL_TX_NO_ACK_REQUESTED_COUNT_ATTRIBUTE_ID (0x001B) |
| #define ZCL_TX_DATA_COUNT_ATTRIBUTE_ID (0x001C) |
| #define ZCL_TX_DATA_POLL_COUNT_ATTRIBUTE_ID (0x001D) |
| #define ZCL_TX_BEACON_COUNT_ATTRIBUTE_ID (0x001E) |
| #define ZCL_TX_BEACON_REQUEST_COUNT_ATTRIBUTE_ID (0x001F) |
| #define ZCL_TX_OTHER_COUNT_ATTRIBUTE_ID (0x0020) |
| #define ZCL_TX_RETRY_COUNT_ATTRIBUTE_ID (0x0021) |
| #define ZCL_TX_DIRECT_MAX_RETRY_EXPIRY_COUNT_ATTRIBUTE_ID (0x0022) |
| #define ZCL_TX_INDIRECT_MAX_RETRY_EXPIRY_COUNT_ATTRIBUTE_ID (0x0023) |
| #define ZCL_TX_ERR_CCA_COUNT_ATTRIBUTE_ID (0x0024) |
| #define ZCL_TX_ERR_ABORT_COUNT_ATTRIBUTE_ID (0x0025) |
| #define ZCL_TX_ERR_BUSY_CHANNEL_COUNT_ATTRIBUTE_ID (0x0026) |
| #define ZCL_RX_TOTAL_COUNT_ATTRIBUTE_ID (0x0027) |
| #define ZCL_RX_UNICAST_COUNT_ATTRIBUTE_ID (0x0028) |
| #define ZCL_RX_BROADCAST_COUNT_ATTRIBUTE_ID (0x0029) |
| #define ZCL_RX_DATA_COUNT_ATTRIBUTE_ID (0x002A) |
| #define ZCL_RX_DATA_POLL_COUNT_ATTRIBUTE_ID (0x002B) |
| #define ZCL_RX_BEACON_COUNT_ATTRIBUTE_ID (0x002C) |
| #define ZCL_RX_BEACON_REQUEST_COUNT_ATTRIBUTE_ID (0x002D) |
| #define ZCL_RX_OTHER_COUNT_ATTRIBUTE_ID (0x002E) |
| #define ZCL_RX_ADDRESS_FILTERED_COUNT_ATTRIBUTE_ID (0x002F) |
| #define ZCL_RX_DESTADDR_FILTERED_COUNT_ATTRIBUTE_ID (0x0030) |
| #define ZCL_RX_DUPLICATED_COUNT_ATTRIBUTE_ID (0x0031) |
| #define ZCL_RX_ERR_NO_FRAME_COUNT_ATTRIBUTE_ID (0x0032) |
| #define ZCL_RX_ERR_UNKNOWN_NEIGHBOR_COUNT_ATTRIBUTE_ID (0x0033) |
| #define ZCL_RX_ERR_INVALID_SRC_ADDR_COUNT_ATTRIBUTE_ID (0x0034) |
| #define ZCL_RX_ERR_SEC_COUNT_ATTRIBUTE_ID (0x0035) |
| #define ZCL_RX_ERR_FCS_COUNT_ATTRIBUTE_ID (0x0036) |
| #define ZCL_RX_ERR_OTHER_COUNT_ATTRIBUTE_ID (0x0037) |
| #define ZCL_ACTIVE_TIMESTAMP_ATTRIBUTE_ID (0x0038) |
| #define ZCL_PENDING_TIMESTAMP_ATTRIBUTE_ID (0x0039) |
| #define ZCL_DELAY_ATTRIBUTE_ID (0x003A) |
| #define ZCL_SECURITY_POLICY_ATTRIBUTE_ID (0x003B) |
| #define ZCL_DIAG_CHANNEL_MASK_ATTRIBUTE_ID (0x003C) |
| #define ZCL_OPERATIONAL_DATASET_COMPONENTS_ATTRIBUTE_ID (0x003D) |
| #define ZCL_ACTIVE_THREAD_NETWORK_FAULTS_ATTRIBUTE_ID (0x003E) |
| |
| // Attribute ids for cluster: WiFi Network Diagnostics |
| |
| // Client attributes |
| |
| // Server attributes |
| #define ZCL_BSSID_ATTRIBUTE_ID (0x0000) |
| #define ZCL_SECURITY_TYPE_ATTRIBUTE_ID (0x0001) |
| #define ZCL_WIFI_VERSION_ATTRIBUTE_ID (0x0002) |
| #define ZCL_CHANNEL_NUMBER_ATTRIBUTE_ID (0x0003) |
| #define ZCL_RSSI_ATTRIBUTE_ID (0x0004) |
| #define ZCL_BEACON_LOST_COUNT_ATTRIBUTE_ID (0x0005) |
| #define ZCL_BEACON_RX_COUNT_ATTRIBUTE_ID (0x0006) |
| #define ZCL_PACKET_MULTICAST_RX_COUNT_ATTRIBUTE_ID (0x0007) |
| #define ZCL_PACKET_MULTICAST_TX_COUNT_ATTRIBUTE_ID (0x0008) |
| #define ZCL_PACKET_UNICAST_RX_COUNT_ATTRIBUTE_ID (0x0009) |
| #define ZCL_PACKET_UNICAST_TX_COUNT_ATTRIBUTE_ID (0x000A) |
| #define ZCL_CURRENT_MAX_RATE_ATTRIBUTE_ID (0x000B) |
| #define ZCL_OVERRUN_COUNT_ATTRIBUTE_ID (0x000C) |
| |
| // Attribute ids for cluster: Ethernet Network Diagnostics |
| |
| // Client attributes |
| |
| // Server attributes |
| #define ZCL_PHY_RATE_ATTRIBUTE_ID (0x0000) |
| #define ZCL_FULL_DUPLEX_ATTRIBUTE_ID (0x0001) |
| #define ZCL_PACKET_RX_COUNT_ATTRIBUTE_ID (0x0002) |
| #define ZCL_PACKET_TX_COUNT_ATTRIBUTE_ID (0x0003) |
| #define ZCL_TX_ERR_COUNT_ATTRIBUTE_ID (0x0004) |
| #define ZCL_COLLISION_COUNT_ATTRIBUTE_ID (0x0005) |
| #define ZCL_ETHERNET_OVERRUN_COUNT_ATTRIBUTE_ID (0x0006) |
| #define ZCL_CARRIER_DETECT_ATTRIBUTE_ID (0x0007) |
| #define ZCL_TIME_SINCE_RESET_ATTRIBUTE_ID (0x0008) |
| |
| // Attribute ids for cluster: Time Synchronization |
| |
| // Client attributes |
| |
| // Server attributes |
| #define ZCL_UTC_TIME_ATTRIBUTE_ID (0x0000) |
| #define ZCL_GRANULARITY_ATTRIBUTE_ID (0x0001) |
| #define ZCL_TIME_SOURCE_ATTRIBUTE_ID (0x0002) |
| #define ZCL_TRUSTED_TIME_NODE_ID_ATTRIBUTE_ID (0x0003) |
| #define ZCL_DEFAULT_NTP_ATTRIBUTE_ID (0x0004) |
| #define ZCL_TIME_ZONE_ATTRIBUTE_ID (0x0005) |
| #define ZCL_DST_OFFSET_ATTRIBUTE_ID (0x0006) |
| #define ZCL_LOCAL_TIME_ATTRIBUTE_ID (0x0007) |
| #define ZCL_TIME_ZONE_DATABASE_ATTRIBUTE_ID (0x0008) |
| #define ZCL_NTP_SERVER_PORT_ATTRIBUTE_ID (0x0009) |
| |
| // Attribute ids for cluster: Bridged Device Basic Information |
| |
| // Client attributes |
| |
| // Server attributes |
| #define ZCL_VENDOR_NAME_ATTRIBUTE_ID (0x0001) |
| #define ZCL_VENDOR_ID_ATTRIBUTE_ID (0x0002) |
| #define ZCL_PRODUCT_NAME_ATTRIBUTE_ID (0x0003) |
| #define ZCL_NODE_LABEL_ATTRIBUTE_ID (0x0005) |
| #define ZCL_HARDWARE_VERSION_ATTRIBUTE_ID (0x0007) |
| #define ZCL_HARDWARE_VERSION_STRING_ATTRIBUTE_ID (0x0008) |
| #define ZCL_SOFTWARE_VERSION_ATTRIBUTE_ID (0x0009) |
| #define ZCL_SOFTWARE_VERSION_STRING_ATTRIBUTE_ID (0x000A) |
| #define ZCL_MANUFACTURING_DATE_ATTRIBUTE_ID (0x000B) |
| #define ZCL_PART_NUMBER_ATTRIBUTE_ID (0x000C) |
| #define ZCL_PRODUCT_URL_ATTRIBUTE_ID (0x000D) |
| #define ZCL_PRODUCT_LABEL_ATTRIBUTE_ID (0x000E) |
| #define ZCL_SERIAL_NUMBER_ATTRIBUTE_ID (0x000F) |
| #define ZCL_REACHABLE_ATTRIBUTE_ID (0x0011) |
| #define ZCL_UNIQUE_ID_ATTRIBUTE_ID (0x0012) |
| |
| // Attribute ids for cluster: Switch |
| |
| // Client attributes |
| |
| // Server attributes |
| #define ZCL_NUMBER_OF_POSITIONS_ATTRIBUTE_ID (0x0000) |
| #define ZCL_CURRENT_POSITION_ATTRIBUTE_ID (0x0001) |
| #define ZCL_MULTI_PRESS_MAX_ATTRIBUTE_ID (0x0002) |
| |
| // Attribute ids for cluster: Administrator Commissioning |
| |
| // Client attributes |
| |
| // Server attributes |
| #define ZCL_WINDOW_STATUS_ATTRIBUTE_ID (0x0000) |
| #define ZCL_ADMIN_FABRIC_INDEX_ATTRIBUTE_ID (0x0001) |
| #define ZCL_ADMIN_VENDOR_ID_ATTRIBUTE_ID (0x0002) |
| |
| // Attribute ids for cluster: Operational Credentials |
| |
| // Client attributes |
| |
| // Server attributes |
| #define ZCL_NOCS_ATTRIBUTE_ID (0x0000) |
| #define ZCL_FABRICS_ATTRIBUTE_ID (0x0001) |
| #define ZCL_SUPPORTED_FABRICS_ATTRIBUTE_ID (0x0002) |
| #define ZCL_COMMISSIONED_FABRICS_ATTRIBUTE_ID (0x0003) |
| #define ZCL_TRUSTED_ROOT_CERTIFICATES_ATTRIBUTE_ID (0x0004) |
| #define ZCL_CURRENT_FABRIC_INDEX_ATTRIBUTE_ID (0x0005) |
| |
| // Attribute ids for cluster: Group Key Management |
| |
| // Client attributes |
| |
| // Server attributes |
| #define ZCL_GROUP_KEY_MAP_ATTRIBUTE_ID (0x0000) |
| #define ZCL_GROUP_TABLE_ATTRIBUTE_ID (0x0001) |
| #define ZCL_MAX_GROUPS_PER_FABRIC_ATTRIBUTE_ID (0x0002) |
| #define ZCL_MAX_GROUP_KEYS_PER_FABRIC_ATTRIBUTE_ID (0x0003) |
| |
| // Attribute ids for cluster: Fixed Label |
| |
| // Client attributes |
| |
| // Server attributes |
| #define ZCL_LABEL_LIST_ATTRIBUTE_ID (0x0000) |
| |
| // Attribute ids for cluster: User Label |
| |
| // Client attributes |
| |
| // Server attributes |
| #define ZCL_LABEL_LIST_ATTRIBUTE_ID (0x0000) |
| |
| // Attribute ids for cluster: Proxy Configuration |
| |
| // Client attributes |
| |
| // Server attributes |
| |
| // Attribute ids for cluster: Proxy Discovery |
| |
| // Client attributes |
| |
| // Server attributes |
| |
| // Attribute ids for cluster: Proxy Valid |
| |
| // Client attributes |
| |
| // Server attributes |
| |
| // Attribute ids for cluster: Boolean State |
| |
| // Client attributes |
| |
| // Server attributes |
| #define ZCL_STATE_VALUE_ATTRIBUTE_ID (0x0000) |
| |
| // Attribute ids for cluster: Mode Select |
| |
| // Client attributes |
| |
| // Server attributes |
| #define ZCL_MODE_DESCRIPTION_ATTRIBUTE_ID (0x0000) |
| #define ZCL_STANDARD_NAMESPACE_ATTRIBUTE_ID (0x0001) |
| #define ZCL_SUPPORTED_MODES_ATTRIBUTE_ID (0x0002) |
| #define ZCL_CURRENT_MODE_ATTRIBUTE_ID (0x0003) |
| #define ZCL_START_UP_MODE_ATTRIBUTE_ID (0x0004) |
| #define ZCL_ON_MODE_ATTRIBUTE_ID (0x0005) |
| |
| // Attribute ids for cluster: Door Lock |
| |
| // Client attributes |
| |
| // Server attributes |
| #define ZCL_LOCK_STATE_ATTRIBUTE_ID (0x0000) |
| #define ZCL_LOCK_TYPE_ATTRIBUTE_ID (0x0001) |
| #define ZCL_ACTUATOR_ENABLED_ATTRIBUTE_ID (0x0002) |
| #define ZCL_DOOR_STATE_ATTRIBUTE_ID (0x0003) |
| #define ZCL_DOOR_OPEN_EVENTS_ATTRIBUTE_ID (0x0004) |
| #define ZCL_DOOR_CLOSED_EVENTS_ATTRIBUTE_ID (0x0005) |
| #define ZCL_OPEN_PERIOD_ATTRIBUTE_ID (0x0006) |
| #define ZCL_NUM_TOTAL_USERS_SUPPORTED_ATTRIBUTE_ID (0x0011) |
| #define ZCL_NUM_PIN_USERS_SUPPORTED_ATTRIBUTE_ID (0x0012) |
| #define ZCL_NUM_RFID_USERS_SUPPORTED_ATTRIBUTE_ID (0x0013) |
| #define ZCL_NUM_WEEKDAY_SCHEDULES_SUPPORTED_PER_USER_ATTRIBUTE_ID (0x0014) |
| #define ZCL_NUM_YEARDAY_SCHEDULES_SUPPORTED_PER_USER_ATTRIBUTE_ID (0x0015) |
| #define ZCL_NUM_HOLIDAY_SCHEDULES_SUPPORTED_ATTRIBUTE_ID (0x0016) |
| #define ZCL_MAX_PIN_LENGTH_ATTRIBUTE_ID (0x0017) |
| #define ZCL_MIN_PIN_LENGTH_ATTRIBUTE_ID (0x0018) |
| #define ZCL_MAX_RFID_CODE_LENGTH_ATTRIBUTE_ID (0x0019) |
| #define ZCL_MIN_RFID_CODE_LENGTH_ATTRIBUTE_ID (0x001A) |
| #define ZCL_CREDENTIAL_RULES_SUPPORT_ATTRIBUTE_ID (0x001B) |
| #define ZCL_NUM_CREDENTIALS_SUPPORTED_PER_USER_ATTRIBUTE_ID (0x001C) |
| #define ZCL_LANGUAGE_ATTRIBUTE_ID (0x0021) |
| #define ZCL_LED_SETTINGS_ATTRIBUTE_ID (0x0022) |
| #define ZCL_AUTO_RELOCK_TIME_ATTRIBUTE_ID (0x0023) |
| #define ZCL_SOUND_VOLUME_ATTRIBUTE_ID (0x0024) |
| #define ZCL_OPERATING_MODE_ATTRIBUTE_ID (0x0025) |
| #define ZCL_SUPPORTED_OPERATING_MODES_ATTRIBUTE_ID (0x0026) |
| #define ZCL_DEFAULT_CONFIGURATION_REGISTER_ATTRIBUTE_ID (0x0027) |
| #define ZCL_ENABLE_LOCAL_PROGRAMMING_ATTRIBUTE_ID (0x0028) |
| #define ZCL_ENABLE_ONE_TOUCH_LOCKING_ATTRIBUTE_ID (0x0029) |
| #define ZCL_ENABLE_INSIDE_STATUS_LED_ATTRIBUTE_ID (0x002A) |
| #define ZCL_ENABLE_PRIVACY_MODE_BUTTON_ATTRIBUTE_ID (0x002B) |
| #define ZCL_LOCAL_PROGRAMMING_FEATURES_ATTRIBUTE_ID (0x002C) |
| #define ZCL_WRONG_CODE_ENTRY_LIMIT_ATTRIBUTE_ID (0x0030) |
| #define ZCL_USER_CODE_TEMPORARY_DISABLE_TIME_ATTRIBUTE_ID (0x0031) |
| #define ZCL_SEND_PIN_OVER_THE_AIR_ATTRIBUTE_ID (0x0032) |
| #define ZCL_REQUIRE_PIN_FOR_REMOTE_OPERATION_ATTRIBUTE_ID (0x0033) |
| #define ZCL_EXPIRING_USER_TIMEOUT_ATTRIBUTE_ID (0x0035) |
| |
| // Attribute ids for cluster: Window Covering |
| |
| // Client attributes |
| |
| // Server attributes |
| #define ZCL_WC_TYPE_ATTRIBUTE_ID (0x0000) |
| #define ZCL_WC_PHYSICAL_CLOSED_LIMIT_LIFT_ATTRIBUTE_ID (0x0001) |
| #define ZCL_WC_PHYSICAL_CLOSED_LIMIT_TILT_ATTRIBUTE_ID (0x0002) |
| #define ZCL_WC_CURRENT_POSITION_LIFT_ATTRIBUTE_ID (0x0003) |
| #define ZCL_WC_CURRENT_POSITION_TILT_ATTRIBUTE_ID (0x0004) |
| #define ZCL_WC_NUMBER_OF_ACTUATIONS_LIFT_ATTRIBUTE_ID (0x0005) |
| #define ZCL_WC_NUMBER_OF_ACTUATIONS_TILT_ATTRIBUTE_ID (0x0006) |
| #define ZCL_WC_CONFIG_STATUS_ATTRIBUTE_ID (0x0007) |
| #define ZCL_WC_CURRENT_POSITION_LIFT_PERCENTAGE_ATTRIBUTE_ID (0x0008) |
| #define ZCL_WC_CURRENT_POSITION_TILT_PERCENTAGE_ATTRIBUTE_ID (0x0009) |
| #define ZCL_WC_OPERATIONAL_STATUS_ATTRIBUTE_ID (0x000A) |
| #define ZCL_WC_TARGET_POSITION_LIFT_PERCENT100_THS_ATTRIBUTE_ID (0x000B) |
| #define ZCL_WC_TARGET_POSITION_TILT_PERCENT100_THS_ATTRIBUTE_ID (0x000C) |
| #define ZCL_WC_END_PRODUCT_TYPE_ATTRIBUTE_ID (0x000D) |
| #define ZCL_WC_CURRENT_POSITION_LIFT_PERCENT100_THS_ATTRIBUTE_ID (0x000E) |
| #define ZCL_WC_CURRENT_POSITION_TILT_PERCENT100_THS_ATTRIBUTE_ID (0x000F) |
| #define ZCL_WC_INSTALLED_OPEN_LIMIT_LIFT_ATTRIBUTE_ID (0x0010) |
| #define ZCL_WC_INSTALLED_CLOSED_LIMIT_LIFT_ATTRIBUTE_ID (0x0011) |
| #define ZCL_WC_INSTALLED_OPEN_LIMIT_TILT_ATTRIBUTE_ID (0x0012) |
| #define ZCL_WC_INSTALLED_CLOSED_LIMIT_TILT_ATTRIBUTE_ID (0x0013) |
| #define ZCL_WC_MODE_ATTRIBUTE_ID (0x0017) |
| #define ZCL_WC_SAFETY_STATUS_ATTRIBUTE_ID (0x001A) |
| |
| // Attribute ids for cluster: Barrier Control |
| |
| // Client attributes |
| |
| // Server attributes |
| #define ZCL_BARRIER_MOVING_STATE_ATTRIBUTE_ID (0x0001) |
| #define ZCL_BARRIER_SAFETY_STATUS_ATTRIBUTE_ID (0x0002) |
| #define ZCL_BARRIER_CAPABILITIES_ATTRIBUTE_ID (0x0003) |
| #define ZCL_BARRIER_OPEN_EVENTS_ATTRIBUTE_ID (0x0004) |
| #define ZCL_BARRIER_CLOSE_EVENTS_ATTRIBUTE_ID (0x0005) |
| #define ZCL_BARRIER_COMMAND_OPEN_EVENTS_ATTRIBUTE_ID (0x0006) |
| #define ZCL_BARRIER_COMMAND_CLOSE_EVENTS_ATTRIBUTE_ID (0x0007) |
| #define ZCL_BARRIER_OPEN_PERIOD_ATTRIBUTE_ID (0x0008) |
| #define ZCL_BARRIER_CLOSE_PERIOD_ATTRIBUTE_ID (0x0009) |
| #define ZCL_BARRIER_POSITION_ATTRIBUTE_ID (0x000A) |
| |
| // Attribute ids for cluster: Pump Configuration and Control |
| |
| // Client attributes |
| |
| // Server attributes |
| #define ZCL_MAX_PRESSURE_ATTRIBUTE_ID (0x0000) |
| #define ZCL_MAX_SPEED_ATTRIBUTE_ID (0x0001) |
| #define ZCL_MAX_FLOW_ATTRIBUTE_ID (0x0002) |
| #define ZCL_MIN_CONST_PRESSURE_ATTRIBUTE_ID (0x0003) |
| #define ZCL_MAX_CONST_PRESSURE_ATTRIBUTE_ID (0x0004) |
| #define ZCL_MIN_COMP_PRESSURE_ATTRIBUTE_ID (0x0005) |
| #define ZCL_MAX_COMP_PRESSURE_ATTRIBUTE_ID (0x0006) |
| #define ZCL_MIN_CONST_SPEED_ATTRIBUTE_ID (0x0007) |
| #define ZCL_MAX_CONST_SPEED_ATTRIBUTE_ID (0x0008) |
| #define ZCL_MIN_CONST_FLOW_ATTRIBUTE_ID (0x0009) |
| #define ZCL_MAX_CONST_FLOW_ATTRIBUTE_ID (0x000A) |
| #define ZCL_MIN_CONST_TEMP_ATTRIBUTE_ID (0x000B) |
| #define ZCL_MAX_CONST_TEMP_ATTRIBUTE_ID (0x000C) |
| #define ZCL_PUMP_STATUS_ATTRIBUTE_ID (0x0010) |
| #define ZCL_EFFECTIVE_OPERATION_MODE_ATTRIBUTE_ID (0x0011) |
| #define ZCL_EFFECTIVE_CONTROL_MODE_ATTRIBUTE_ID (0x0012) |
| #define ZCL_CAPACITY_ATTRIBUTE_ID (0x0013) |
| #define ZCL_SPEED_ATTRIBUTE_ID (0x0014) |
| #define ZCL_LIFETIME_RUNNING_HOURS_ATTRIBUTE_ID (0x0015) |
| #define ZCL_PUMP_POWER_ATTRIBUTE_ID (0x0016) |
| #define ZCL_LIFETIME_ENERGY_CONSUMED_ATTRIBUTE_ID (0x0017) |
| #define ZCL_OPERATION_MODE_ATTRIBUTE_ID (0x0020) |
| #define ZCL_CONTROL_MODE_ATTRIBUTE_ID (0x0021) |
| |
| // Attribute ids for cluster: Thermostat |
| |
| // Client attributes |
| |
| // Server attributes |
| #define ZCL_LOCAL_TEMPERATURE_ATTRIBUTE_ID (0x0000) |
| #define ZCL_OUTDOOR_TEMPERATURE_ATTRIBUTE_ID (0x0001) |
| #define ZCL_THERMOSTAT_OCCUPANCY_ATTRIBUTE_ID (0x0002) |
| #define ZCL_ABS_MIN_HEAT_SETPOINT_LIMIT_ATTRIBUTE_ID (0x0003) |
| #define ZCL_ABS_MAX_HEAT_SETPOINT_LIMIT_ATTRIBUTE_ID (0x0004) |
| #define ZCL_ABS_MIN_COOL_SETPOINT_LIMIT_ATTRIBUTE_ID (0x0005) |
| #define ZCL_ABS_MAX_COOL_SETPOINT_LIMIT_ATTRIBUTE_ID (0x0006) |
| #define ZCL_PI_COOLING_DEMAND_ATTRIBUTE_ID (0x0007) |
| #define ZCL_PI_HEATING_DEMAND_ATTRIBUTE_ID (0x0008) |
| #define ZCL_HVAC_SYSTEM_TYPE_CONFIGURATION_ATTRIBUTE_ID (0x0009) |
| #define ZCL_LOCAL_TEMPERATURE_CALIBRATION_ATTRIBUTE_ID (0x0010) |
| #define ZCL_OCCUPIED_COOLING_SETPOINT_ATTRIBUTE_ID (0x0011) |
| #define ZCL_OCCUPIED_HEATING_SETPOINT_ATTRIBUTE_ID (0x0012) |
| #define ZCL_UNOCCUPIED_COOLING_SETPOINT_ATTRIBUTE_ID (0x0013) |
| #define ZCL_UNOCCUPIED_HEATING_SETPOINT_ATTRIBUTE_ID (0x0014) |
| #define ZCL_MIN_HEAT_SETPOINT_LIMIT_ATTRIBUTE_ID (0x0015) |
| #define ZCL_MAX_HEAT_SETPOINT_LIMIT_ATTRIBUTE_ID (0x0016) |
| #define ZCL_MIN_COOL_SETPOINT_LIMIT_ATTRIBUTE_ID (0x0017) |
| #define ZCL_MAX_COOL_SETPOINT_LIMIT_ATTRIBUTE_ID (0x0018) |
| #define ZCL_MIN_SETPOINT_DEAD_BAND_ATTRIBUTE_ID (0x0019) |
| #define ZCL_REMOTE_SENSING_ATTRIBUTE_ID (0x001A) |
| #define ZCL_CONTROL_SEQUENCE_OF_OPERATION_ATTRIBUTE_ID (0x001B) |
| #define ZCL_SYSTEM_MODE_ATTRIBUTE_ID (0x001C) |
| #define ZCL_THERMOSTAT_RUNNING_MODE_ATTRIBUTE_ID (0x001E) |
| #define ZCL_START_OF_WEEK_ATTRIBUTE_ID (0x0020) |
| #define ZCL_NUMBER_OF_WEEKLY_TRANSITIONS_ATTRIBUTE_ID (0x0021) |
| #define ZCL_NUMBER_OF_DAILY_TRANSITIONS_ATTRIBUTE_ID (0x0022) |
| #define ZCL_TEMPERATURE_SETPOINT_HOLD_ATTRIBUTE_ID (0x0023) |
| #define ZCL_TEMPERATURE_SETPOINT_HOLD_DURATION_ATTRIBUTE_ID (0x0024) |
| #define ZCL_THERMOSTAT_PROGRAMMING_OPERATION_MODE_ATTRIBUTE_ID (0x0025) |
| #define ZCL_THERMOSTAT_RUNNING_STATE_ATTRIBUTE_ID (0x0029) |
| #define ZCL_SETPOINT_CHANGE_SOURCE_ATTRIBUTE_ID (0x0030) |
| #define ZCL_SETPOINT_CHANGE_AMOUNT_ATTRIBUTE_ID (0x0031) |
| #define ZCL_SETPOINT_CHANGE_SOURCE_TIMESTAMP_ATTRIBUTE_ID (0x0032) |
| #define ZCL_OCCUPIED_SETBACK_ATTRIBUTE_ID (0x0034) |
| #define ZCL_OCCUPIED_SETBACK_MIN_ATTRIBUTE_ID (0x0035) |
| #define ZCL_OCCUPIED_SETBACK_MAX_ATTRIBUTE_ID (0x0036) |
| #define ZCL_UNOCCUPIED_SETBACK_ATTRIBUTE_ID (0x0037) |
| #define ZCL_UNOCCUPIED_SETBACK_MIN_ATTRIBUTE_ID (0x0038) |
| #define ZCL_UNOCCUPIED_SETBACK_MAX_ATTRIBUTE_ID (0x0039) |
| #define ZCL_EMERGENCY_HEAT_DELTA_ATTRIBUTE_ID (0x003A) |
| #define ZCL_AC_TYPE_ATTRIBUTE_ID (0x0040) |
| #define ZCL_AC_CAPACITY_ATTRIBUTE_ID (0x0041) |
| #define ZCL_AC_REFRIGERANT_TYPE_ATTRIBUTE_ID (0x0042) |
| #define ZCL_AC_COMPRESSOR_TYPE_ATTRIBUTE_ID (0x0043) |
| #define ZCL_AC_ERROR_CODE_ATTRIBUTE_ID (0x0044) |
| #define ZCL_AC_LOUVER_POSITION_ATTRIBUTE_ID (0x0045) |
| #define ZCL_AC_COIL_TEMPERATURE_ATTRIBUTE_ID (0x0046) |
| #define ZCL_AC_CAPACITY_FORMAT_ATTRIBUTE_ID (0x0047) |
| |
| // Attribute ids for cluster: Fan Control |
| |
| // Client attributes |
| |
| // Server attributes |
| #define ZCL_FAN_MODE_ATTRIBUTE_ID (0x0000) |
| #define ZCL_FAN_MODE_SEQUENCE_ATTRIBUTE_ID (0x0001) |
| #define ZCL_PERCENT_SETTING_ATTRIBUTE_ID (0x0002) |
| #define ZCL_PERCENT_CURRENT_ATTRIBUTE_ID (0x0003) |
| #define ZCL_SPEED_MAX_ATTRIBUTE_ID (0x0004) |
| #define ZCL_SPEED_SETTING_ATTRIBUTE_ID (0x0005) |
| #define ZCL_SPEED_CURRENT_ATTRIBUTE_ID (0x0006) |
| #define ZCL_ROCK_SUPPORT_ATTRIBUTE_ID (0x0007) |
| #define ZCL_ROCK_SETTING_ATTRIBUTE_ID (0x0008) |
| #define ZCL_WIND_SUPPORT_ATTRIBUTE_ID (0x0009) |
| #define ZCL_WIND_SETTING_ATTRIBUTE_ID (0x000A) |
| |
| // Attribute ids for cluster: Thermostat User Interface Configuration |
| |
| // Client attributes |
| |
| // Server attributes |
| #define ZCL_TEMPERATURE_DISPLAY_MODE_ATTRIBUTE_ID (0x0000) |
| #define ZCL_KEYPAD_LOCKOUT_ATTRIBUTE_ID (0x0001) |
| #define ZCL_SCHEDULE_PROGRAMMING_VISIBILITY_ATTRIBUTE_ID (0x0002) |
| |
| // Attribute ids for cluster: Color Control |
| |
| // Client attributes |
| |
| // Server attributes |
| #define ZCL_COLOR_CONTROL_CURRENT_HUE_ATTRIBUTE_ID (0x0000) |
| #define ZCL_COLOR_CONTROL_CURRENT_SATURATION_ATTRIBUTE_ID (0x0001) |
| #define ZCL_COLOR_CONTROL_REMAINING_TIME_ATTRIBUTE_ID (0x0002) |
| #define ZCL_COLOR_CONTROL_CURRENT_X_ATTRIBUTE_ID (0x0003) |
| #define ZCL_COLOR_CONTROL_CURRENT_Y_ATTRIBUTE_ID (0x0004) |
| #define ZCL_COLOR_CONTROL_DRIFT_COMPENSATION_ATTRIBUTE_ID (0x0005) |
| #define ZCL_COLOR_CONTROL_COMPENSATION_TEXT_ATTRIBUTE_ID (0x0006) |
| #define ZCL_COLOR_CONTROL_COLOR_TEMPERATURE_ATTRIBUTE_ID (0x0007) |
| #define ZCL_COLOR_CONTROL_COLOR_MODE_ATTRIBUTE_ID (0x0008) |
| #define ZCL_COLOR_CONTROL_OPTIONS_ATTRIBUTE_ID (0x000F) |
| #define ZCL_COLOR_CONTROL_NUMBER_OF_PRIMARIES_ATTRIBUTE_ID (0x0010) |
| #define ZCL_COLOR_CONTROL_PRIMARY_1_X_ATTRIBUTE_ID (0x0011) |
| #define ZCL_COLOR_CONTROL_PRIMARY_1_Y_ATTRIBUTE_ID (0x0012) |
| #define ZCL_COLOR_CONTROL_PRIMARY_1_INTENSITY_ATTRIBUTE_ID (0x0013) |
| #define ZCL_COLOR_CONTROL_PRIMARY_2_X_ATTRIBUTE_ID (0x0015) |
| #define ZCL_COLOR_CONTROL_PRIMARY_2_Y_ATTRIBUTE_ID (0x0016) |
| #define ZCL_COLOR_CONTROL_PRIMARY_2_INTENSITY_ATTRIBUTE_ID (0x0017) |
| #define ZCL_COLOR_CONTROL_PRIMARY_3_X_ATTRIBUTE_ID (0x0019) |
| #define ZCL_COLOR_CONTROL_PRIMARY_3_Y_ATTRIBUTE_ID (0x001A) |
| #define ZCL_COLOR_CONTROL_PRIMARY_3_INTENSITY_ATTRIBUTE_ID (0x001B) |
| #define ZCL_COLOR_CONTROL_PRIMARY_4_X_ATTRIBUTE_ID (0x0020) |
| #define ZCL_COLOR_CONTROL_PRIMARY_4_Y_ATTRIBUTE_ID (0x0021) |
| #define ZCL_COLOR_CONTROL_PRIMARY_4_INTENSITY_ATTRIBUTE_ID (0x0022) |
| #define ZCL_COLOR_CONTROL_PRIMARY_5_X_ATTRIBUTE_ID (0x0024) |
| #define ZCL_COLOR_CONTROL_PRIMARY_5_Y_ATTRIBUTE_ID (0x0025) |
| #define ZCL_COLOR_CONTROL_PRIMARY_5_INTENSITY_ATTRIBUTE_ID (0x0026) |
| #define ZCL_COLOR_CONTROL_PRIMARY_6_X_ATTRIBUTE_ID (0x0028) |
| #define ZCL_COLOR_CONTROL_PRIMARY_6_Y_ATTRIBUTE_ID (0x0029) |
| #define ZCL_COLOR_CONTROL_PRIMARY_6_INTENSITY_ATTRIBUTE_ID (0x002A) |
| #define ZCL_COLOR_CONTROL_WHITE_POINT_X_ATTRIBUTE_ID (0x0030) |
| #define ZCL_COLOR_CONTROL_WHITE_POINT_Y_ATTRIBUTE_ID (0x0031) |
| #define ZCL_COLOR_CONTROL_COLOR_POINT_R_X_ATTRIBUTE_ID (0x0032) |
| #define ZCL_COLOR_CONTROL_COLOR_POINT_R_Y_ATTRIBUTE_ID (0x0033) |
| #define ZCL_COLOR_CONTROL_COLOR_POINT_R_INTENSITY_ATTRIBUTE_ID (0x0034) |
| #define ZCL_COLOR_CONTROL_COLOR_POINT_G_X_ATTRIBUTE_ID (0x0036) |
| #define ZCL_COLOR_CONTROL_COLOR_POINT_G_Y_ATTRIBUTE_ID (0x0037) |
| #define ZCL_COLOR_CONTROL_COLOR_POINT_G_INTENSITY_ATTRIBUTE_ID (0x0038) |
| #define ZCL_COLOR_CONTROL_COLOR_POINT_B_X_ATTRIBUTE_ID (0x003A) |
| #define ZCL_COLOR_CONTROL_COLOR_POINT_B_Y_ATTRIBUTE_ID (0x003B) |
| #define ZCL_COLOR_CONTROL_COLOR_POINT_B_INTENSITY_ATTRIBUTE_ID (0x003C) |
| #define ZCL_COLOR_CONTROL_ENHANCED_CURRENT_HUE_ATTRIBUTE_ID (0x4000) |
| #define ZCL_COLOR_CONTROL_ENHANCED_COLOR_MODE_ATTRIBUTE_ID (0x4001) |
| #define ZCL_COLOR_CONTROL_COLOR_LOOP_ACTIVE_ATTRIBUTE_ID (0x4002) |
| #define ZCL_COLOR_CONTROL_COLOR_LOOP_DIRECTION_ATTRIBUTE_ID (0x4003) |
| #define ZCL_COLOR_CONTROL_COLOR_LOOP_TIME_ATTRIBUTE_ID (0x4004) |
| #define ZCL_COLOR_CONTROL_COLOR_LOOP_START_ENHANCED_HUE_ATTRIBUTE_ID (0x4005) |
| #define ZCL_COLOR_CONTROL_COLOR_LOOP_STORED_ENHANCED_HUE_ATTRIBUTE_ID (0x4006) |
| #define ZCL_COLOR_CONTROL_COLOR_CAPABILITIES_ATTRIBUTE_ID (0x400A) |
| #define ZCL_COLOR_CONTROL_COLOR_TEMP_PHYSICAL_MIN_ATTRIBUTE_ID (0x400B) |
| #define ZCL_COLOR_CONTROL_COLOR_TEMP_PHYSICAL_MAX_ATTRIBUTE_ID (0x400C) |
| #define ZCL_COLOR_CONTROL_TEMPERATURE_LEVEL_MIN_MIREDS_ATTRIBUTE_ID (0x400D) |
| #define ZCL_START_UP_COLOR_TEMPERATURE_MIREDS_ATTRIBUTE_ID (0x4010) |
| |
| // Attribute ids for cluster: Ballast Configuration |
| |
| // Client attributes |
| |
| // Server attributes |
| #define ZCL_PHYSICAL_MIN_LEVEL_ATTRIBUTE_ID (0x0000) |
| #define ZCL_PHYSICAL_MAX_LEVEL_ATTRIBUTE_ID (0x0001) |
| #define ZCL_BALLAST_STATUS_ATTRIBUTE_ID (0x0002) |
| #define ZCL_MIN_LEVEL_ATTRIBUTE_ID (0x0010) |
| #define ZCL_MAX_LEVEL_ATTRIBUTE_ID (0x0011) |
| #define ZCL_INTRINSIC_BALLAST_FACTOR_ATTRIBUTE_ID (0x0014) |
| #define ZCL_BALLAST_FACTOR_ADJUSTMENT_ATTRIBUTE_ID (0x0015) |
| #define ZCL_LAMP_QUANTITY_ATTRIBUTE_ID (0x0020) |
| #define ZCL_LAMP_TYPE_ATTRIBUTE_ID (0x0030) |
| #define ZCL_LAMP_MANUFACTURER_ATTRIBUTE_ID (0x0031) |
| #define ZCL_LAMP_RATED_HOURS_ATTRIBUTE_ID (0x0032) |
| #define ZCL_LAMP_BURN_HOURS_ATTRIBUTE_ID (0x0033) |
| #define ZCL_LAMP_ALARM_MODE_ATTRIBUTE_ID (0x0034) |
| #define ZCL_LAMP_BURN_HOURS_TRIP_POINT_ATTRIBUTE_ID (0x0035) |
| |
| // Attribute ids for cluster: Illuminance Measurement |
| |
| // Client attributes |
| |
| // Server attributes |
| #define ZCL_ILLUM_MEASURED_VALUE_ATTRIBUTE_ID (0x0000) |
| #define ZCL_ILLUM_MIN_MEASURED_VALUE_ATTRIBUTE_ID (0x0001) |
| #define ZCL_ILLUM_MAX_MEASURED_VALUE_ATTRIBUTE_ID (0x0002) |
| #define ZCL_ILLUM_TOLERANCE_ATTRIBUTE_ID (0x0003) |
| #define ZCL_ILLUM_LIGHT_SENSOR_TYPE_ATTRIBUTE_ID (0x0004) |
| |
| // Attribute ids for cluster: Temperature Measurement |
| |
| // Client attributes |
| |
| // Server attributes |
| #define ZCL_TEMP_MEASURED_VALUE_ATTRIBUTE_ID (0x0000) |
| #define ZCL_TEMP_MIN_MEASURED_VALUE_ATTRIBUTE_ID (0x0001) |
| #define ZCL_TEMP_MAX_MEASURED_VALUE_ATTRIBUTE_ID (0x0002) |
| #define ZCL_TEMP_TOLERANCE_ATTRIBUTE_ID (0x0003) |
| |
| // Attribute ids for cluster: Pressure Measurement |
| |
| // Client attributes |
| |
| // Server attributes |
| #define ZCL_PRESSURE_MEASURED_VALUE_ATTRIBUTE_ID (0x0000) |
| #define ZCL_PRESSURE_MIN_MEASURED_VALUE_ATTRIBUTE_ID (0x0001) |
| #define ZCL_PRESSURE_MAX_MEASURED_VALUE_ATTRIBUTE_ID (0x0002) |
| #define ZCL_PRESSURE_TOLERANCE_ATTRIBUTE_ID (0x0003) |
| #define ZCL_PRESSURE_SCALED_VALUE_ATTRIBUTE_ID (0x0010) |
| #define ZCL_PRESSURE_MIN_SCALED_VALUE_ATTRIBUTE_ID (0x0011) |
| #define ZCL_PRESSURE_MAX_SCALED_VALUE_ATTRIBUTE_ID (0x0012) |
| #define ZCL_PRESSURE_SCALED_TOLERANCE_ATTRIBUTE_ID (0x0013) |
| #define ZCL_PRESSURE_SCALE_ATTRIBUTE_ID (0x0014) |
| |
| // Attribute ids for cluster: Flow Measurement |
| |
| // Client attributes |
| |
| // Server attributes |
| #define ZCL_FLOW_MEASURED_VALUE_ATTRIBUTE_ID (0x0000) |
| #define ZCL_FLOW_MIN_MEASURED_VALUE_ATTRIBUTE_ID (0x0001) |
| #define ZCL_FLOW_MAX_MEASURED_VALUE_ATTRIBUTE_ID (0x0002) |
| #define ZCL_FLOW_TOLERANCE_ATTRIBUTE_ID (0x0003) |
| |
| // Attribute ids for cluster: Relative Humidity Measurement |
| |
| // Client attributes |
| |
| // Server attributes |
| #define ZCL_RELATIVE_HUMIDITY_MEASURED_VALUE_ATTRIBUTE_ID (0x0000) |
| #define ZCL_RELATIVE_HUMIDITY_MIN_MEASURED_VALUE_ATTRIBUTE_ID (0x0001) |
| #define ZCL_RELATIVE_HUMIDITY_MAX_MEASURED_VALUE_ATTRIBUTE_ID (0x0002) |
| #define ZCL_RELATIVE_HUMIDITY_TOLERANCE_ATTRIBUTE_ID (0x0003) |
| |
| // Attribute ids for cluster: Occupancy Sensing |
| |
| // Client attributes |
| |
| // Server attributes |
| #define ZCL_OCCUPANCY_ATTRIBUTE_ID (0x0000) |
| #define ZCL_OCCUPANCY_SENSOR_TYPE_ATTRIBUTE_ID (0x0001) |
| #define ZCL_OCCUPANCY_SENSOR_TYPE_BITMAP_ATTRIBUTE_ID (0x0002) |
| #define ZCL_PIR_OCCUPIED_TO_UNOCCUPIED_DELAY_ATTRIBUTE_ID (0x0010) |
| #define ZCL_PIR_UNOCCUPIED_TO_OCCUPIED_DELAY_ATTRIBUTE_ID (0x0011) |
| #define ZCL_PIR_UNOCCUPIED_TO_OCCUPIED_THRESHOLD_ATTRIBUTE_ID (0x0012) |
| #define ZCL_ULTRASONIC_OCCUPIED_TO_UNOCCUPIED_DELAY_ATTRIBUTE_ID (0x0020) |
| #define ZCL_ULTRASONIC_UNOCCUPIED_TO_OCCUPIED_DELAY_ATTRIBUTE_ID (0x0021) |
| #define ZCL_ULTRASONIC_UNOCCUPIED_TO_OCCUPIED_THRESHOLD_ATTRIBUTE_ID (0x0022) |
| #define ZCL_PHYSICAL_CONTACT_OCCUPIED_TO_UNOCCUPIED_DELAY_ATTRIBUTE_ID (0x0030) |
| #define ZCL_PHYSICAL_CONTACT_UNOCCUPIED_TO_OCCUPIED_DELAY_ATTRIBUTE_ID (0x0031) |
| #define ZCL_PHYSICAL_CONTACT_UNOCCUPIED_TO_OCCUPIED_THRESHOLD_ATTRIBUTE_ID (0x0032) |
| |
| // Attribute ids for cluster: Wake on LAN |
| |
| // Client attributes |
| |
| // Server attributes |
| #define ZCL_WAKE_ON_LAN_MAC_ADDRESS_ATTRIBUTE_ID (0x0000) |
| |
| // Attribute ids for cluster: Channel |
| |
| // Client attributes |
| |
| // Server attributes |
| #define ZCL_CHANNEL_LIST_ATTRIBUTE_ID (0x0000) |
| #define ZCL_CHANNEL_LINEUP_ATTRIBUTE_ID (0x0001) |
| #define ZCL_CHANNEL_CURRENT_CHANNEL_ATTRIBUTE_ID (0x0002) |
| |
| // Attribute ids for cluster: Target Navigator |
| |
| // Client attributes |
| |
| // Server attributes |
| #define ZCL_TARGET_NAVIGATOR_LIST_ATTRIBUTE_ID (0x0000) |
| #define ZCL_TARGET_NAVIGATOR_CURRENT_TARGET_ATTRIBUTE_ID (0x0001) |
| |
| // Attribute ids for cluster: Media Playback |
| |
| // Client attributes |
| |
| // Server attributes |
| #define ZCL_MEDIA_PLAYBACK_STATE_ATTRIBUTE_ID (0x0000) |
| #define ZCL_MEDIA_PLAYBACK_START_TIME_ATTRIBUTE_ID (0x0001) |
| #define ZCL_MEDIA_PLAYBACK_DURATION_ATTRIBUTE_ID (0x0002) |
| #define ZCL_MEDIA_PLAYBACK_PLAYBACK_POSITION_ATTRIBUTE_ID (0x0003) |
| #define ZCL_MEDIA_PLAYBACK_PLAYBACK_SPEED_ATTRIBUTE_ID (0x0004) |
| #define ZCL_MEDIA_PLAYBACK_PLAYBACK_SEEK_RANGE_END_ATTRIBUTE_ID (0x0005) |
| #define ZCL_MEDIA_PLAYBACK_PLAYBACK_SEEK_RANGE_START_ATTRIBUTE_ID (0x0006) |
| |
| // Attribute ids for cluster: Media Input |
| |
| // Client attributes |
| |
| // Server attributes |
| #define ZCL_MEDIA_INPUT_LIST_ATTRIBUTE_ID (0x0000) |
| #define ZCL_MEDIA_INPUT_CURRENT_INPUT_ATTRIBUTE_ID (0x0001) |
| |
| // Attribute ids for cluster: Low Power |
| |
| // Client attributes |
| |
| // Server attributes |
| |
| // Attribute ids for cluster: Keypad Input |
| |
| // Client attributes |
| |
| // Server attributes |
| |
| // Attribute ids for cluster: Content Launcher |
| |
| // Client attributes |
| |
| // Server attributes |
| #define ZCL_CONTENT_LAUNCHER_ACCEPT_HEADER_ATTRIBUTE_ID (0x0000) |
| #define ZCL_CONTENT_LAUNCHER_SUPPORTED_STREAMING_PROTOCOLS_ATTRIBUTE_ID (0x0001) |
| |
| // Attribute ids for cluster: Audio Output |
| |
| // Client attributes |
| |
| // Server attributes |
| #define ZCL_AUDIO_OUTPUT_LIST_ATTRIBUTE_ID (0x0000) |
| #define ZCL_AUDIO_OUTPUT_CURRENT_OUTPUT_ATTRIBUTE_ID (0x0001) |
| |
| // Attribute ids for cluster: Application Launcher |
| |
| // Client attributes |
| |
| // Server attributes |
| #define ZCL_APPLICATION_LAUNCHER_LIST_ATTRIBUTE_ID (0x0000) |
| #define ZCL_APPLICATION_LAUNCHER_CURRENT_APP_ATTRIBUTE_ID (0x0001) |
| |
| // Attribute ids for cluster: Application Basic |
| |
| // Client attributes |
| |
| // Server attributes |
| #define ZCL_APPLICATION_VENDOR_NAME_ATTRIBUTE_ID (0x0000) |
| #define ZCL_APPLICATION_VENDOR_ID_ATTRIBUTE_ID (0x0001) |
| #define ZCL_APPLICATION_NAME_ATTRIBUTE_ID (0x0002) |
| #define ZCL_APPLICATION_PRODUCT_ID_ATTRIBUTE_ID (0x0003) |
| #define ZCL_APPLICATION_APP_ATTRIBUTE_ID (0x0004) |
| #define ZCL_APPLICATION_STATUS_ATTRIBUTE_ID (0x0005) |
| #define ZCL_APPLICATION_VERSION_ATTRIBUTE_ID (0x0006) |
| #define ZCL_APPLICATION_ALLOWED_VENDOR_LIST_ATTRIBUTE_ID (0x0007) |
| |
| // Attribute ids for cluster: Account Login |
| |
| // Client attributes |
| |
| // Server attributes |
| |
| // Attribute ids for cluster: Electrical Measurement |
| |
| // Client attributes |
| |
| // Server attributes |
| #define ZCL_MEASUREMENT_TYPE_ATTRIBUTE_ID (0x0000) |
| #define ZCL_DC_VOLTAGE_ATTRIBUTE_ID (0x0100) |
| #define ZCL_DC_VOLTAGE_MIN_ATTRIBUTE_ID (0x0101) |
| #define ZCL_DC_VOLTAGE_MAX_ATTRIBUTE_ID (0x0102) |
| #define ZCL_DC_CURRENT_ATTRIBUTE_ID (0x0103) |
| #define ZCL_DC_CURRENT_MIN_ATTRIBUTE_ID (0x0104) |
| #define ZCL_DC_CURRENT_MAX_ATTRIBUTE_ID (0x0105) |
| #define ZCL_DC_POWER_ATTRIBUTE_ID (0x0106) |
| #define ZCL_DC_POWER_MIN_ATTRIBUTE_ID (0x0107) |
| #define ZCL_DC_POWER_MAX_ATTRIBUTE_ID (0x0108) |
| #define ZCL_DC_VOLTAGE_MULTIPLIER_ATTRIBUTE_ID (0x0200) |
| #define ZCL_DC_VOLTAGE_DIVISOR_ATTRIBUTE_ID (0x0201) |
| #define ZCL_DC_CURRENT_MULTIPLIER_ATTRIBUTE_ID (0x0202) |
| #define ZCL_DC_CURRENT_DIVISOR_ATTRIBUTE_ID (0x0203) |
| #define ZCL_DC_POWER_MULTIPLIER_ATTRIBUTE_ID (0x0204) |
| #define ZCL_DC_POWER_DIVISOR_ATTRIBUTE_ID (0x0205) |
| #define ZCL_AC_FREQUENCY_ATTRIBUTE_ID (0x0300) |
| #define ZCL_AC_FREQUENCY_MIN_ATTRIBUTE_ID (0x0301) |
| #define ZCL_AC_FREQUENCY_MAX_ATTRIBUTE_ID (0x0302) |
| #define ZCL_NEUTRAL_CURRENT_ATTRIBUTE_ID (0x0303) |
| #define ZCL_TOTAL_ACTIVE_POWER_ATTRIBUTE_ID (0x0304) |
| #define ZCL_TOTAL_REACTIVE_POWER_ATTRIBUTE_ID (0x0305) |
| #define ZCL_TOTAL_APPARENT_POWER_ATTRIBUTE_ID (0x0306) |
| #define ZCL_MEASURED_1_ST_HARMONIC_CURRENT_ATTRIBUTE_ID (0x0307) |
| #define ZCL_MEASURED_3_RD_HARMONIC_CURRENT_ATTRIBUTE_ID (0x0308) |
| #define ZCL_MEASURED_5_TH_HARMONIC_CURRENT_ATTRIBUTE_ID (0x0309) |
| #define ZCL_MEASURED_7_TH_HARMONIC_CURRENT_ATTRIBUTE_ID (0x030A) |
| #define ZCL_MEASURED_9_TH_HARMONIC_CURRENT_ATTRIBUTE_ID (0x030B) |
| #define ZCL_MEASURED_11_TH_HARMONIC_CURRENT_ATTRIBUTE_ID (0x030C) |
| #define ZCL_MEASURED_PHASE_1_ST_HARMONIC_CURRENT_ATTRIBUTE_ID (0x030D) |
| #define ZCL_MEASURED_PHASE_3_RD_HARMONIC_CURRENT_ATTRIBUTE_ID (0x030E) |
| #define ZCL_MEASURED_PHASE_5_TH_HARMONIC_CURRENT_ATTRIBUTE_ID (0x030F) |
| #define ZCL_MEASURED_PHASE_7_TH_HARMONIC_CURRENT_ATTRIBUTE_ID (0x0310) |
| #define ZCL_MEASURED_PHASE_9_TH_HARMONIC_CURRENT_ATTRIBUTE_ID (0x0311) |
| #define ZCL_MEASURED_PHASE_11_TH_HARMONIC_CURRENT_ATTRIBUTE_ID (0x0312) |
| #define ZCL_AC_FREQUENCY_MULTIPLIER_ATTRIBUTE_ID (0x0400) |
| #define ZCL_AC_FREQUENCY_DIVISOR_ATTRIBUTE_ID (0x0401) |
| #define ZCL_POWER_MULTIPLIER_ATTRIBUTE_ID (0x0402) |
| #define ZCL_POWER_DIVISOR_ATTRIBUTE_ID (0x0403) |
| #define ZCL_HARMONIC_CURRENT_MULTIPLIER_ATTRIBUTE_ID (0x0404) |
| #define ZCL_PHASE_HARMONIC_CURRENT_MULTIPLIER_ATTRIBUTE_ID (0x0405) |
| #define ZCL_INSTANTANEOUS_VOLTAGE_ATTRIBUTE_ID (0x0500) |
| #define ZCL_INSTANTANEOUS_LINE_CURRENT_ATTRIBUTE_ID (0x0501) |
| #define ZCL_INSTANTANEOUS_ACTIVE_CURRENT_ATTRIBUTE_ID (0x0502) |
| #define ZCL_INSTANTANEOUS_REACTIVE_CURRENT_ATTRIBUTE_ID (0x0503) |
| #define ZCL_INSTANTANEOUS_POWER_ATTRIBUTE_ID (0x0504) |
| #define ZCL_RMS_VOLTAGE_ATTRIBUTE_ID (0x0505) |
| #define ZCL_RMS_VOLTAGE_MIN_ATTRIBUTE_ID (0x0506) |
| #define ZCL_RMS_VOLTAGE_MAX_ATTRIBUTE_ID (0x0507) |
| #define ZCL_RMS_CURRENT_ATTRIBUTE_ID (0x0508) |
| #define ZCL_RMS_CURRENT_MIN_ATTRIBUTE_ID (0x0509) |
| #define ZCL_RMS_CURRENT_MAX_ATTRIBUTE_ID (0x050A) |
| #define ZCL_ACTIVE_POWER_ATTRIBUTE_ID (0x050B) |
| #define ZCL_ACTIVE_POWER_MIN_ATTRIBUTE_ID (0x050C) |
| #define ZCL_ACTIVE_POWER_MAX_ATTRIBUTE_ID (0x050D) |
| #define ZCL_REACTIVE_POWER_ATTRIBUTE_ID (0x050E) |
| #define ZCL_APPARENT_POWER_ATTRIBUTE_ID (0x050F) |
| #define ZCL_AC_POWER_FACTOR_ATTRIBUTE_ID (0x0510) |
| #define ZCL_AVERAGE_RMS_VOLTAGE_MEASUREMENT_PERIOD_ATTRIBUTE_ID (0x0511) |
| #define ZCL_AVERAGE_RMS_UNDER_VOLTAGE_COUNTER_ATTRIBUTE_ID (0x0513) |
| #define ZCL_RMS_EXTREME_OVER_VOLTAGE_PERIOD_ATTRIBUTE_ID (0x0514) |
| #define ZCL_RMS_EXTREME_UNDER_VOLTAGE_PERIOD_ATTRIBUTE_ID (0x0515) |
| #define ZCL_RMS_VOLTAGE_SAG_PERIOD_ATTRIBUTE_ID (0x0516) |
| #define ZCL_RMS_VOLTAGE_SWELL_PERIOD_ATTRIBUTE_ID (0x0517) |
| #define ZCL_AC_VOLTAGE_MULTIPLIER_ATTRIBUTE_ID (0x0600) |
| #define ZCL_AC_VOLTAGE_DIVISOR_ATTRIBUTE_ID (0x0601) |
| #define ZCL_AC_CURRENT_MULTIPLIER_ATTRIBUTE_ID (0x0602) |
| #define ZCL_AC_CURRENT_DIVISOR_ATTRIBUTE_ID (0x0603) |
| #define ZCL_AC_POWER_MULTIPLIER_ATTRIBUTE_ID (0x0604) |
| #define ZCL_AC_POWER_DIVISOR_ATTRIBUTE_ID (0x0605) |
| #define ZCL_DC_OVERLOAD_ALARMS_MASK_ATTRIBUTE_ID (0x0700) |
| #define ZCL_DC_VOLTAGE_OVERLOAD_ATTRIBUTE_ID (0x0701) |
| #define ZCL_DC_CURRENT_OVERLOAD_ATTRIBUTE_ID (0x0702) |
| #define ZCL_AC_OVERLOAD_ALARMS_MASK_ATTRIBUTE_ID (0x0800) |
| #define ZCL_AC_VOLTAGE_OVERLOAD_ATTRIBUTE_ID (0x0801) |
| #define ZCL_AC_CURRENT_OVERLOAD_ATTRIBUTE_ID (0x0802) |
| #define ZCL_AC_POWER_OVERLOAD_ATTRIBUTE_ID (0x0803) |
| #define ZCL_AC_REACTIVE_POWER_OVERLOAD_ATTRIBUTE_ID (0x0804) |
| #define ZCL_AVERAGE_RMS_OVER_VOLTAGE_ATTRIBUTE_ID (0x0805) |
| #define ZCL_AVERAGE_RMS_UNDER_VOLTAGE_ATTRIBUTE_ID (0x0806) |
| #define ZCL_RMS_EXTREME_OVER_VOLTAGE_ATTRIBUTE_ID (0x0807) |
| #define ZCL_RMS_EXTREME_UNDER_VOLTAGE_ATTRIBUTE_ID (0x0808) |
| #define ZCL_RMS_VOLTAGE_SAG_ATTRIBUTE_ID (0x0809) |
| #define ZCL_RMS_VOLTAGE_SWELL_ATTRIBUTE_ID (0x080A) |
| #define ZCL_LINE_CURRENT_PHASE_B_ATTRIBUTE_ID (0x0901) |
| #define ZCL_ACTIVE_CURRENT_PHASE_B_ATTRIBUTE_ID (0x0902) |
| #define ZCL_REACTIVE_CURRENT_PHASE_B_ATTRIBUTE_ID (0x0903) |
| #define ZCL_RMS_VOLTAGE_PHASE_B_ATTRIBUTE_ID (0x0905) |
| #define ZCL_RMS_VOLTAGE_MIN_PHASE_B_ATTRIBUTE_ID (0x0906) |
| #define ZCL_RMS_VOLTAGE_MAX_PHASE_B_ATTRIBUTE_ID (0x0907) |
| #define ZCL_RMS_CURRENT_PHASE_B_ATTRIBUTE_ID (0x0908) |
| #define ZCL_RMS_CURRENT_MIN_PHASE_B_ATTRIBUTE_ID (0x0909) |
| #define ZCL_RMS_CURRENT_MAX_PHASE_B_ATTRIBUTE_ID (0x090A) |
| #define ZCL_ACTIVE_POWER_PHASE_B_ATTRIBUTE_ID (0x090B) |
| #define ZCL_ACTIVE_POWER_MIN_PHASE_B_ATTRIBUTE_ID (0x090C) |
| #define ZCL_ACTIVE_POWER_MAX_PHASE_B_ATTRIBUTE_ID (0x090D) |
| #define ZCL_REACTIVE_POWER_PHASE_B_ATTRIBUTE_ID (0x090E) |
| #define ZCL_APPARENT_POWER_PHASE_B_ATTRIBUTE_ID (0x090F) |
| #define ZCL_POWER_FACTOR_PHASE_B_ATTRIBUTE_ID (0x0910) |
| #define ZCL_AVERAGE_RMS_VOLTAGE_MEASUREMENT_PERIOD_PHASE_B_ATTRIBUTE_ID (0x0911) |
| #define ZCL_AVERAGE_RMS_OVER_VOLTAGE_COUNTER_PHASE_B_ATTRIBUTE_ID (0x0912) |
| #define ZCL_AVERAGE_RMS_UNDER_VOLTAGE_COUNTER_PHASE_B_ATTRIBUTE_ID (0x0913) |
| #define ZCL_RMS_EXTREME_OVER_VOLTAGE_PERIOD_PHASE_B_ATTRIBUTE_ID (0x0914) |
| #define ZCL_RMS_EXTREME_UNDER_VOLTAGE_PERIOD_PHASE_B_ATTRIBUTE_ID (0x0915) |
| #define ZCL_RMS_VOLTAGE_SAG_PERIOD_PHASE_B_ATTRIBUTE_ID (0x0916) |
| #define ZCL_RMS_VOLTAGE_SWELL_PERIOD_PHASE_B_ATTRIBUTE_ID (0x0917) |
| #define ZCL_LINE_CURRENT_PHASE_C_ATTRIBUTE_ID (0x0A01) |
| #define ZCL_ACTIVE_CURRENT_PHASE_C_ATTRIBUTE_ID (0x0A02) |
| #define ZCL_REACTIVE_CURRENT_PHASE_C_ATTRIBUTE_ID (0x0A03) |
| #define ZCL_RMS_VOLTAGE_PHASE_C_ATTRIBUTE_ID (0x0A05) |
| #define ZCL_RMS_VOLTAGE_MIN_PHASE_C_ATTRIBUTE_ID (0x0A06) |
| #define ZCL_RMS_VOLTAGE_MAX_PHASE_C_ATTRIBUTE_ID (0x0A07) |
| #define ZCL_RMS_CURRENT_PHASE_C_ATTRIBUTE_ID (0x0A08) |
| #define ZCL_RMS_CURRENT_MIN_PHASE_C_ATTRIBUTE_ID (0x0A09) |
| #define ZCL_RMS_CURRENT_MAX_PHASE_C_ATTRIBUTE_ID (0x0A0A) |
| #define ZCL_ACTIVE_POWER_PHASE_C_ATTRIBUTE_ID (0x0A0B) |
| #define ZCL_ACTIVE_POWER_MIN_PHASE_C_ATTRIBUTE_ID (0x0A0C) |
| #define ZCL_ACTIVE_POWER_MAX_PHASE_C_ATTRIBUTE_ID (0x0A0D) |
| #define ZCL_REACTIVE_POWER_PHASE_C_ATTRIBUTE_ID (0x0A0E) |
| #define ZCL_APPARENT_POWER_PHASE_C_ATTRIBUTE_ID (0x0A0F) |
| #define ZCL_POWER_FACTOR_PHASE_C_ATTRIBUTE_ID (0x0A10) |
| #define ZCL_AVERAGE_RMS_VOLTAGE_MEASUREMENT_PERIOD_PHASE_C_ATTRIBUTE_ID (0x0A11) |
| #define ZCL_AVERAGE_RMS_OVER_VOLTAGE_COUNTER_PHASE_C_ATTRIBUTE_ID (0x0A12) |
| #define ZCL_AVERAGE_RMS_UNDER_VOLTAGE_COUNTER_PHASE_C_ATTRIBUTE_ID (0x0A13) |
| #define ZCL_RMS_EXTREME_OVER_VOLTAGE_PERIOD_PHASE_C_ATTRIBUTE_ID (0x0A14) |
| #define ZCL_RMS_EXTREME_UNDER_VOLTAGE_PERIOD_PHASE_C_ATTRIBUTE_ID (0x0A15) |
| #define ZCL_RMS_VOLTAGE_SAG_PERIOD_PHASE_C_ATTRIBUTE_ID (0x0A16) |
| #define ZCL_RMS_VOLTAGE_SWELL_PERIOD_PHASE_C_ATTRIBUTE_ID (0x0A17) |
| |
| // Attribute ids for cluster: Client Monitoring |
| |
| // Client attributes |
| |
| // Server attributes |
| #define ZCL_IDLE_MODE_INTERVAL_ATTRIBUTE_ID (0x0000) |
| #define ZCL_ACTIVE_MODE_INTERVAL_ATTRIBUTE_ID (0x0001) |
| #define ZCL_ACTIVE_MODE_THRESHOLD_ATTRIBUTE_ID (0x0002) |
| #define ZCL_EXPECTED_CLIENTS_ATTRIBUTE_ID (0x0003) |
| |
| // Attribute ids for cluster: Unit Testing |
| |
| // Client attributes |
| |
| // Server attributes |
| #define ZCL_BOOLEAN_ATTRIBUTE_ID (0x0000) |
| #define ZCL_BITMAP8_ATTRIBUTE_ID (0x0001) |
| #define ZCL_BITMAP16_ATTRIBUTE_ID (0x0002) |
| #define ZCL_BITMAP32_ATTRIBUTE_ID (0x0003) |
| #define ZCL_BITMAP64_ATTRIBUTE_ID (0x0004) |
| #define ZCL_INT8_U_ATTRIBUTE_ID (0x0005) |
| #define ZCL_INT16_U_ATTRIBUTE_ID (0x0006) |
| #define ZCL_INT24_U_ATTRIBUTE_ID (0x0007) |
| #define ZCL_INT32_U_ATTRIBUTE_ID (0x0008) |
| #define ZCL_INT40_U_ATTRIBUTE_ID (0x0009) |
| #define ZCL_INT48_U_ATTRIBUTE_ID (0x000A) |
| #define ZCL_INT56_U_ATTRIBUTE_ID (0x000B) |
| #define ZCL_INT64_U_ATTRIBUTE_ID (0x000C) |
| #define ZCL_INT8_S_ATTRIBUTE_ID (0x000D) |
| #define ZCL_INT16_S_ATTRIBUTE_ID (0x000E) |
| #define ZCL_INT24_S_ATTRIBUTE_ID (0x000F) |
| #define ZCL_INT32_S_ATTRIBUTE_ID (0x0010) |
| #define ZCL_INT40_S_ATTRIBUTE_ID (0x0011) |
| #define ZCL_INT48_S_ATTRIBUTE_ID (0x0012) |
| #define ZCL_INT56_S_ATTRIBUTE_ID (0x0013) |
| #define ZCL_INT64_S_ATTRIBUTE_ID (0x0014) |
| #define ZCL_ENUM8_ATTRIBUTE_ID (0x0015) |
| #define ZCL_ENUM16_ATTRIBUTE_ID (0x0016) |
| #define ZCL_FLOAT_SINGLE_ATTRIBUTE_ID (0x0017) |
| #define ZCL_FLOAT_DOUBLE_ATTRIBUTE_ID (0x0018) |
| #define ZCL_OCTET_STRING_ATTRIBUTE_ID (0x0019) |
| #define ZCL_LIST_ATTRIBUTE_ID (0x001A) |
| #define ZCL_LIST_OCTET_STRING_ATTRIBUTE_ID (0x001B) |
| #define ZCL_LIST_STRUCT_OCTET_STRING_ATTRIBUTE_ID (0x001C) |
| #define ZCL_LONG_OCTET_STRING_ATTRIBUTE_ID (0x001D) |
| #define ZCL_CHAR_STRING_ATTRIBUTE_ID (0x001E) |
| #define ZCL_LONG_CHAR_STRING_ATTRIBUTE_ID (0x001F) |
| #define ZCL_EPOCH_US_ATTRIBUTE_ID (0x0020) |
| #define ZCL_EPOCH_S_ATTRIBUTE_ID (0x0021) |
| #define ZCL_TEST_VENDOR_ID_ATTRIBUTE_ID (0x0022) |
| #define ZCL_LIST_OF_STRUCTS_WITH_OPTIONALS_ATTRIBUTE_ID (0x0023) |
| #define ZCL_SIMPLE_ENUM_ATTRIBUTE_ID (0x0024) |
| #define ZCL_STRUCT_ATTRIBUTE_ID (0x0025) |
| #define ZCL_RANGE_RESTRICTED_INT8_U_ATTRIBUTE_ID (0x0026) |
| #define ZCL_RANGE_RESTRICTED_INT8S_ATTRIBUTE_ID (0x0027) |
| #define ZCL_RANGE_RESTRICTED_INT16_U_ATTRIBUTE_ID (0x0028) |
| #define ZCL_RANGE_RESTRICTED_INT16S_ATTRIBUTE_ID (0x0029) |
| #define ZCL_LIST_LONG_OCTET_STRING_ATTRIBUTE_ID (0x002A) |
| #define ZCL_LIST_FABRIC_SCOPED_ATTRIBUTE_ID (0x002B) |
| #define ZCL_TIMED_WRITE_BOOLEAN_ATTRIBUTE_ID (0x0030) |
| #define ZCL_GENERAL_ERROR_BOOLEAN_ATTRIBUTE_ID (0x0031) |
| #define ZCL_CLUSTER_ERROR_BOOLEAN_ATTRIBUTE_ID (0x0032) |
| #define ZCL_UNSUPPORTED_ATTRIBUTE_ID (0x00FF) |
| #define ZCL_NULLABLE_BOOLEAN_ATTRIBUTE_ID (0x4000) |
| #define ZCL_NULLABLE_BITMAP8_ATTRIBUTE_ID (0x4001) |
| #define ZCL_NULLABLE_BITMAP16_ATTRIBUTE_ID (0x4002) |
| #define ZCL_NULLABLE_BITMAP32_ATTRIBUTE_ID (0x4003) |
| #define ZCL_NULLABLE_BITMAP64_ATTRIBUTE_ID (0x4004) |
| #define ZCL_NULLABLE_INT8_U_ATTRIBUTE_ID (0x4005) |
| #define ZCL_NULLABLE_INT16_U_ATTRIBUTE_ID (0x4006) |
| #define ZCL_NULLABLE_INT24_U_ATTRIBUTE_ID (0x4007) |
| #define ZCL_NULLABLE_INT32_U_ATTRIBUTE_ID (0x4008) |
| #define ZCL_NULLABLE_INT40_U_ATTRIBUTE_ID (0x4009) |
| #define ZCL_NULLABLE_INT48_U_ATTRIBUTE_ID (0x400A) |
| #define ZCL_NULLABLE_INT56_U_ATTRIBUTE_ID (0x400B) |
| #define ZCL_NULLABLE_INT64_U_ATTRIBUTE_ID (0x400C) |
| #define ZCL_NULLABLE_INT8_S_ATTRIBUTE_ID (0x400D) |
| #define ZCL_NULLABLE_INT16_S_ATTRIBUTE_ID (0x400E) |
| #define ZCL_NULLABLE_INT24_S_ATTRIBUTE_ID (0x400F) |
| #define ZCL_NULLABLE_INT32_S_ATTRIBUTE_ID (0x4010) |
| #define ZCL_NULLABLE_INT40_S_ATTRIBUTE_ID (0x4011) |
| #define ZCL_NULLABLE_INT48_S_ATTRIBUTE_ID (0x4012) |
| #define ZCL_NULLABLE_INT56_S_ATTRIBUTE_ID (0x4013) |
| #define ZCL_NULLABLE_INT64_S_ATTRIBUTE_ID (0x4014) |
| #define ZCL_NULLABLE_ENUM8_ATTRIBUTE_ID (0x4015) |
| #define ZCL_NULLABLE_ENUM16_ATTRIBUTE_ID (0x4016) |
| #define ZCL_NULLABLE_FLOAT_SINGLE_ATTRIBUTE_ID (0x4017) |
| #define ZCL_NULLABLE_FLOAT_DOUBLE_ATTRIBUTE_ID (0x4018) |
| #define ZCL_NULLABLE_OCTET_STRING_ATTRIBUTE_ID (0x4019) |
| #define ZCL_NULLABLE_CHAR_STRING_ATTRIBUTE_ID (0x401E) |
| #define ZCL_NULLABLE_SIMPLE_ENUM_ATTRIBUTE_ID (0x4024) |
| #define ZCL_NULLABLE_STRUCT_ATTRIBUTE_ID (0x4025) |
| #define ZCL_NULLABLE_RANGE_RESTRICTED_INT8_U_ATTRIBUTE_ID (0x4026) |
| #define ZCL_NULLABLE_RANGE_RESTRICTED_INT8S_ATTRIBUTE_ID (0x4027) |
| #define ZCL_NULLABLE_RANGE_RESTRICTED_INT16_U_ATTRIBUTE_ID (0x4028) |
| #define ZCL_NULLABLE_RANGE_RESTRICTED_INT16_S_ATTRIBUTE_ID (0x4029) |
| #define ZCL_WRITE_ONLY_INT8_U_ATTRIBUTE_ID (0x402A) |
| |
| // Attribute ids for cluster: Fault Injection |
| |
| // Client attributes |
| |
| // Server attributes |
