An example showing the use of Matter on the Silicon Labs EFR32 MG24 boards.
NOTE: Silicon Laboratories now maintains a public matter GitHub repo with frequent releases thoroughly tested and validated. Developers looking to develop matter products with silabs hardware are encouraged to use our latest release with added tools and documentation. Silabs Matter Github
The Silabs dishwasher example provides a baseline demonstration of a dishwasher control device, built using Matter and the Silicon Labs gecko SDK. It can be controlled by a Chip controller over an Openthread or Wifi network..
The Silabs device can be commissioned over Bluetooth Low Energy where the device and the Chip controller will exchange security information with the Rendez-vous procedure. If using Thread, Thread Network credentials are then provided to the Silabs device which will then join the Thread network.
If the LCD is enabled, the LCD on the Silabs WSTK shows a QR Code containing the needed commissioning information for the BLE connection and starting the Rendez-vous procedure.
The dishwasher example is intended to serve both as a means to explore the workings of Matter as well as a template for creating real products based on the Silicon Labs platform.
Download the Simplicity Commander command line tool, and ensure that commander is your shell search path. (For Mac OS X, commander is located inside Commander.app/Contents/MacOS/.)
Download and install a suitable ARM gcc tool chain: GNU Arm Embedded Toolchain 9-2019-q4-major
Install some additional tools (likely already present for CHIP developers):
Linux: sudo apt-get install git ninja-build
Mac OS X: brew install ninja
Supported hardware:
For the latest supported hardware please refer to the Hardware Requirements in the Silicon Labs Matter Github Repo
MG21 boards: Currently not supported due to RAM limitation.
MG24 boards :
Build the example application:
cd ~/connectedhomeip ./scripts/examples/gn_silabs_example.sh ./silabs_examples/dishwasher-app/silabs/ ./out/dishwasher-app BRD4187C
To delete generated executable, libraries and object files use:
$ cd ~/connectedhomeip $ rm -rf ./out/
OR use GN/Ninja directly
$ cd ~/connectedhomeip/silabs_examples/dishwasher-app/silabs $ git submodule update --init $ source third_party/connectedhomeip/scripts/activate.sh $ export SILABS_BOARD=BRD4187C $ gn gen out/dishwasher-app $ ninja -C out/dishwasher-app
To delete generated executable, libraries and object files use:
$ cd ~/connectedhomeip/silabs_examples/dishwasher-app/silabs $ rm -rf out/
For more build options, help is provided when running the build script without arguments
./scripts/examples/gn_silabs_example.sh
On the command line:
$ python3 out/dishwasher-app/matter-silabs-dishwasher-example.flash.py
Or with the Ozone debugger, just load the .out file.
All Silabs boards require a bootloader, see Silicon Labs documentation for more info. Pre-built bootloader binaries are available in the Assets section of the Releases page on Silabs Matter Github .
The example application is built to use the SEGGER Real Time Transfer (RTT) facility for log output. RTT is a feature built-in to the J-Link Interface MCU on the WSTK development board. It allows bi-directional communication with an embedded application without the need for a dedicated UART.
Using the RTT facility requires downloading and installing the SEGGER J-Link Software and Documentation Pack (web site).
Alternatively, SEGGER Ozone J-Link debugger can be used to view RTT logs too after flashing the .out file.
Download the J-Link installer by navigating to the appropriate URL and agreeing to the license agreement.
Install the J-Link software
$ cd ~/Downloads $ sudo dpkg -i JLink_Linux_V*_x86_64.deb
In Linux, grant the logged in user the ability to talk to the development hardware via the linux tty device (/dev/ttyACMx) by adding them to the dialout group.
$ sudo usermod -a -G dialout ${USER}
Once the above is complete, log output can be viewed using the JLinkExe tool in combination with JLinkRTTClient as follows:
Run the JLinkExe tool with arguments to autoconnect to the WSTK board:
For MG24 use:
$ JLinkExe -device EFR32MG24AXXXF1024 -if SWD -speed 4000 -autoconnect 1
In a second terminal, run the JLinkRTTClient to view logs:
$ JLinkRTTClient
It is assumed here that you already have an OpenThread border router configured and running. If not see the following guide Openthread_border_router for more information on how to setup a border router on a raspberryPi.
Take note that the RCP code is available directly through Simplicity Studio 5 under File->New->Project Wizard->Examples->Thread : ot-rcp
User interface : LCD The LCD on Silabs WSTK shows a QR Code. This QR Code is be scanned by the CHIP Tool app For the Rendez-vous procedure over BLE
* On devices that do not have or support the LCD Display like the BRD4166A Thunderboard Sense 2, a URL can be found in the RTT logs. <info > [SVR] Copy/paste the below URL in a browser to see the QR Code: <info > [SVR] https://project-chip.github.io/connectedhomeip/qrcode.html?data=CH%3AI34NM%20-00%200C9SS0
LED 0 shows the overall state of the device and its connectivity. The following states are possible:
- _Short Flash On (50 ms on/950 ms off)_ ; The device is in the
unprovisioned (unpaired) state and is waiting for a commissioning
application to connect.
- _Rapid Even Flashing_ ; (100 ms on/100 ms off)_ — The device is in the
unprovisioned state and a commissioning application is connected through
Bluetooth LE.
- _Short Flash Off_ ; (950ms on/50ms off)_ — The device is fully
provisioned, but does not yet have full Thread network or service
connectivity.
- _Solid On_ ; The device is fully provisioned and has full Thread
network and service connectivity.
LED 1 Shows the dishwasher working state following states are possible:
- _Solid On_ ; dishwasher is running - _Slow_Blink_ ; dishwasher is paused - _Off_ ; dishwasher is stopped - _Fast_Blink_ ; dishwasher has encountered an error
Push Button 0
- _Press and Release_ : Start, or restart, BLE advertisement in fast mode. It will advertise in this mode
for 30 seconds. The device will then switch to a slower interval advertisement.
After 15 minutes, the advertisement stops.
Additionally, it will cycle through the QR code, application status screen and device status screen, respectively.
- _Pressed and hold for 6 s_ : Initiates the factory reset of the device.
Releasing the button within the 6-second window cancels the factory reset
procedure. **LEDs** blink in unison when the factory reset procedure is
initiated.
Push Button 1 Cycle the dishwasher operational states Running/Paused/Stopped
You can provision and control the Matter device using the python controller, chip-tool standalone, Android, or iOS app.
Silabs provides chip-tool as a wrapper function and more user-friendly method of using chip-tool within the pre-built Raspberry Pi image. For more info on using chip-tool, see Chiptool.
Here is an example using chip-tool:
$ chip-tool pairing ble-thread 1 hex:0e080000000000010000000300001335060004001fffe002084fe76e9a8b5edaf50708fde46f999f0698e20510d47f5027a414ffeebaefa92285cc84fa030f4f70656e5468726561642d653439630102e49c0410b92f8c7fbb4f9f3e08492ee3915fbd2f0c0402a0fff8 20202021 3840 --ble-adapter 0 $ chip-tool operationalstate start 1 1