Setup ESP-IDF and CHIP Environment

Setting up IDF and CHIP environment is one time setup.

Setup ESP-IDF (Espressif IoT Development Framework)

Building the example application requires the use of the ESP-IDF and the xtensa-esp32-elf toolchain for ESP32 modules or the riscv-esp32-elf toolchain for ESP32C3 modules.

The VSCode devcontainer has these components pre-installed, so you can skip this step.

Install Prerequisites

• Linux
• macOS

Get IDF v4.4.1

• Clone ESP-IDF v4.4.1 release

  $ git clone -b v4.4.1 --recursive https://github.com/espressif/esp-idf.git
  $ cd esp-idf
  $ ./install.sh
  

• To update an existing esp-idf toolchain to v4.4.1:

  $ cd path/to/esp-idf
  $ git fetch origin
  $ git checkout v4.4.1
  $ git reset --hard origin/v4.4.1
  $ git submodule update --recursive --init
  $ git clean -fdx
  $ ./install.sh
  

• For ESP32H2, please checkout commit id 10f3aba770, currently only lighting-app is supported on H2

  $ cd esp-idf
  $ git checkout 10f3aba770
  $ git submodule update --init
  $ ./install.sh
  

Setup CHIP environment

Install Prerequisites

• Linux
• macOS

Prepare for building

Before running any other build command, the scripts/activate.sh environment setup script should be sourced at the top level. This script takes care of downloading GN, ninja, and setting up a Python environment with libraries used to build and test.

source scripts/activate.sh

If this script says the environment is out of date, it can be updated by running:

source scripts/bootstrap.sh

---

Once IDF and CHIP environment is set up, head over to application building and commissioning guide.