{
    // Use IntelliSense to learn about possible attributes.
    // Hover to view descriptions of existing attributes.
    // For more information, visit: https://go.microsoft.com/fwlink/?linkid=830387
    "version": "0.2.0",
    "configurations": [
        {
            "name": "Attach to running process",
            "type": "lldb",
            "request": "attach",
            "pid": "${command:pickProcess}"
        },
        {
            "name": "Run application (Darwin x64)",
            "type": "lldb",
            "request": "launch",
            "program": "${workspaceFolder}/out/${input:outAppDarwin}",
            "args": [],
            "cwd": "${workspaceFolder}"
        },
        {
            "name": "Run application (Linux x64)",
            "type": "cppdbg",
            "request": "launch",
            "program": "${workspaceFolder}/out/${input:outAppLinux}",
            "args": [],
            "cwd": "${workspaceFolder}"
        },
        {
            "name": "Run test (Linux x64)",
            "type": "cppdbg",
            "request": "launch",
            "program": "${workspaceFolder}/out/${input:outTestLinux}",
            "args": [],
            "cwd": "${workspaceFolder}"
        },
        {
            "name": "QRCode Tests",
            "type": "cppdbg",
            "request": "launch",
            "program": "${workspaceFolder}/build/default/src/setup_payload/tests/TestQRCode",
            "args": [],
            "stopAtEntry": false,
            "cwd": "${workspaceFolder}",
            "environment": [],
            "externalConsole": false,
            "MIMode": "gdb",
            "preLaunchTask": "Build QRCode Payload Tests",
            "setupCommands": [
                {
                    "description": "Enable pretty-printing for gdb",
                    "text": "-enable-pretty-printing",
                    "ignoreFailures": true
                }
            ]
        },
        {
            "name": "CHIP crypto Tests",
            "type": "cppdbg",
            "request": "launch",
            "program": "${workspaceFolder}/build/default/src/crypto/tests/TestCrypto",
            "args": [],
            "stopAtEntry": false,
            "cwd": "${workspaceFolder}",
            "environment": [],
            "externalConsole": false,
            "MIMode": "gdb",
            "preLaunchTask": "Build & Run Crypto Tests",
            "setupCommands": [
                {
                    "description": "Enable pretty-printing for gdb",
                    "text": "-enable-pretty-printing",
                    "ignoreFailures": true
                }
            ]
        },
        {
            "name": "CHIP openSSL Tests",
            "type": "cppdbg",
            "request": "launch",
            "program": "${workspaceFolder}/build/default/src/crypto/tests/TestCryptoPAL",
            "args": [],
            "stopAtEntry": false,
            "cwd": "${workspaceFolder}",
            "environment": [],
            "externalConsole": false,
            "MIMode": "gdb",
            "preLaunchTask": "Build openSSL crypto Tests",
            "setupCommands": [
                {
                    "description": "Enable pretty-printing for gdb",
                    "text": "-enable-pretty-printing",
                    "ignoreFailures": true
                }
            ]
        },
        {
            "name": "LightingApp (Tizen) [remote]",
            "type": "cppdbg",
            "request": "launch",
            "cwd": "${workspaceFolder}/out/tizen-arm-light",
            "program": "${workspaceFolder}/out/tizen-arm-light/chip-lighting-app",
            "miDebuggerPath": "${env:TIZEN_SDK_ROOT}/tools/arm-linux-gnueabi-gcc-9.2/bin/arm-linux-gnueabi-gdb",
            "additionalSOLibSearchPath": "${env:TIZEN_ROOTFS}",
            "preLaunchTask": "Launch LightingApp with gdbserver attached (Tizen)",
            "miDebuggerServerAddress": "localhost:9999",
            "linux": {
                "MIMode": "gdb"
            },
            "setupCommands": [
                {
                    "description": "Enable pretty-printing for gdb",
                    "text": "-enable-pretty-printing",
                    "ignoreFailures": true
                },
                {
                    "text": "set solib-absolute-prefix ${env:TIZEN_ROOTFS}"
                },
                {
                    "text": "set sysroot ${env:TIZEN_SDK_SYSROOT}"
                },
                {
                    "text": "set debug-file-directory {env:TIZEN_SDK_SYSROOT}/usr/lib/debug"
                },
                {
                    "text": "set solib-search-path ${workspaceFolder}/out/tizen-arm-light"
                }
            ]
        },

        {
            "name": "Debug Mbed examples",
            "type": "cortex-debug",
            "request": "launch",
            "cwd": "${workspaceRoot}/examples/${input:mbedApp}/mbed",
            "executable": "./build-${input:mbedTarget}/${input:mbedDebugProfile}/chip-mbed-${input:mbedApp}-example.elf",
            "armToolchainPath": "${env:PW_ENVIRONMENT_ROOT}/cipd/packages/arm/bin/", // Pigweed environment bootstraping required
            "serverpath": "${env:OPENOCD_PATH}/bin/openocd",
            "servertype": "openocd",
            "searchDir": [
                "${workspaceRoot}/config/mbed/scripts",
                "${env:OPENOCD_PATH}/scripts"
            ],
            "configFiles": ["${input:mbedTarget}.tcl"],
            "overrideLaunchCommands": [
                "-enable-pretty-printing",
                "monitor program {./build-${input:mbedTarget}/${input:mbedDebugProfile}/chip-mbed-${input:mbedApp}-example.hex}",
                "monitor reset run",
                "monitor sleep 200",
                "monitor psoc6 reset_halt sysresetreq"
            ],
            "numberOfProcessors": 2,
            "targetProcessor": 1, // Set to 0 for the CM0+, set to 1 for the CM4
            "overrideRestartCommands": [
                "monitor reset init",
                "monitor reset run",
                "monitor sleep 200",
                "monitor psoc6 reset_halt sysresetreq"
            ],
            "runToMain": true, // if true, program will halt at main. Not used for a restart
            "showDevDebugOutput": false // When set to true, displays output of GDB.
        },

        {
            "name": "Debug Mbed examples [remote]",
            "type": "cortex-debug",
            "request": "launch",
            "cwd": "${workspaceRoot}/examples/${input:mbedApp}/mbed",
            "executable": "./build-${input:mbedTarget}/${input:mbedDebugProfile}/chip-mbed-${input:mbedApp}-example.elf",
            "armToolchainPath": "${env:PW_ENVIRONMENT_ROOT}/cipd/packages/arm/bin/", // Pigweed environment bootstraping required
            "servertype": "external",
            "gdbTarget": "host.docker.internal:3334", //port 3333 for the CM0+, 3334 for the CM4
            "overrideLaunchCommands": [
                "-enable-pretty-printing",
                "monitor reset halt",
                "load ./build-${input:mbedTarget}/${input:mbedDebugProfile}/chip-mbed-${input:mbedApp}-example.hex",
                "monitor reset run",
                "monitor sleep 200",
                "monitor psoc6 reset_halt sysresetreq"
            ],
            "overrideRestartCommands": [
                "monitor reset init",
                "monitor reset run",
                "monitor sleep 200",
                "monitor psoc6 reset_halt sysresetreq"
            ],
            "runToMain": true, // if true, program will halt at main. Not used for a restart
            "showDevDebugOutput": false // When set to true, displays output of GDB.
        },

        {
            "name": "Flash Mbed examples",
            "type": "cortex-debug",
            "request": "launch",
            "cwd": "${workspaceRoot}/examples/${input:mbedApp}/mbed",
            "executable": "./build-${input:mbedTarget}/${input:mbedFlashProfile}/chip-mbed-${input:mbedApp}-example.elf",
            "armToolchainPath": "${env:PW_ENVIRONMENT_ROOT}/cipd/packages/arm/bin/", // Pigweed environment bootstraping required
            "serverpath": "${env:OPENOCD_PATH}/bin/openocd",
            "servertype": "openocd",
            "searchDir": [
                "${workspaceRoot}/config/mbed/scripts",
                "${env:OPENOCD_PATH}/scripts"
            ],
            "configFiles": ["${input:mbedTarget}.tcl"],
            "overrideLaunchCommands": [
                "monitor reset halt",
                "monitor program {./build-${input:mbedTarget}/${input:mbedFlashProfile}/chip-mbed-${input:mbedApp}-example.hex}",
                "monitor reset run",
                "quit"
            ],
            "numberOfProcessors": 2,
            "targetProcessor": 1, // Set to 0 for the CM0+, set to 1 for the CM4
            "showDevDebugOutput": false // When set to true, displays output of GDB.
        },

        {
            "name": "Flash Mbed examples [remote]",
            "type": "cortex-debug",
            "request": "launch",
            "cwd": "${workspaceRoot}/examples/${input:mbedApp}/mbed",
            "executable": "./build-${input:mbedTarget}/${input:mbedFlashProfile}/chip-mbed-${input:mbedApp}-example.elf",
            "armToolchainPath": "${env:PW_ENVIRONMENT_ROOT}/cipd/packages/arm/bin/", // Pigweed environment bootstraping required
            "servertype": "external",
            "gdbTarget": "host.docker.internal:3334", //port 3333 for the CM0+, 3334 for the CM4
            "overrideLaunchCommands": [
                "monitor reset halt",
                "load ./build-${input:mbedTarget}/${input:mbedFlashProfile}/chip-mbed-${input:mbedApp}-example.hex",
                "monitor reset run",
                "quit"
            ],
            "showDevDebugOutput": false // When set to true, displays output of GDB.
        },

        {
            "name": "Debug Mbed unit tests",
            "type": "cortex-debug",
            "request": "launch",
            "cwd": "${workspaceRoot}/src/test_driver/mbed/unit_tests",
            "executable": "./build-${input:mbedTarget}/${input:mbedDebugProfile}/chip-mbed-unit-tests.elf",
            "armToolchainPath": "${env:PW_ENVIRONMENT_ROOT}/cipd/packages/arm/bin/", // Pigweed environment bootstraping required
            "servertype": "openocd",
            "serverpath": "${env:OPENOCD_PATH}/bin/openocd",
            "searchDir": [
                "${workspaceRoot}/config/mbed/scripts",
                "${env:OPENOCD_PATH}/scripts"
            ],
            "configFiles": ["${input:mbedTarget}.tcl"],
            "overrideLaunchCommands": [
                "-enable-pretty-printing",
                "monitor program {./build-${input:mbedTarget}/${input:mbedDebugProfile}/chip-mbed-unit-tests.hex}",
                "monitor reset run",
                "monitor sleep 200",
                "monitor psoc6 reset_halt sysresetreq"
            ],
            "numberOfProcessors": 2,
            "targetProcessor": 1, // Set to 0 for the CM0+, set to 1 for the CM4
            "overrideRestartCommands": [
                "monitor reset init",
                "monitor reset run",
                "monitor sleep 200",
                "monitor psoc6 reset_halt sysresetreq"
            ],
            "runToMain": true, // if true, program will halt at main. Not used for a restart
            "showDevDebugOutput": false // When set to true, displays output of GDB.
        },

        {
            "name": "Debug Mbed unit tests [remote]",
            "type": "cortex-debug",
            "request": "launch",
            "cwd": "${workspaceRoot}/src/test_driver/mbed/unit_tests",
            "executable": "./build-${input:mbedTarget}/${input:mbedDebugProfile}/chip-mbed-unit-tests.elf",
            "armToolchainPath": "${env:PW_ENVIRONMENT_ROOT}/cipd/packages/arm/bin/", // Pigweed environment bootstraping required
            "servertype": "external",
            "gdbTarget": "host.docker.internal:3334", //port 3333 for the CM0+, 3334 for the CM4
            "overrideLaunchCommands": [
                "-enable-pretty-printing",
                "monitor reset halt",
                "load ./build-${input:mbedTarget}/${input:mbedDebugProfile}/chip-mbed-unit-tests.hex",
                "monitor reset run",
                "monitor sleep 200",
                "monitor psoc6 reset_halt sysresetreq"
            ],
            "overrideRestartCommands": [
                "monitor reset init",
                "monitor reset run",
                "monitor sleep 200",
                "monitor psoc6 reset_halt sysresetreq"
            ],
            "runToMain": true, // if true, program will halt at main. Not used for a restart
            "showDevDebugOutput": false // When set to true, displays output of GDB.
        },

        {
            "name": "Flash Mbed unit tests",
            "type": "cortex-debug",
            "request": "launch",
            "cwd": "${workspaceRoot}/src/test_driver/mbed//unit_tests",
            "executable": "./build-${input:mbedTarget}/${input:mbedFlashProfile}/chip-mbed-unit-tests.elf",
            "armToolchainPath": "${env:PW_ENVIRONMENT_ROOT}/cipd/packages/arm/bin/", // Pigweed environment bootstraping required
            "servertype": "openocd",
            "serverpath": "${env:OPENOCD_PATH}/bin/openocd",
            "searchDir": [
                "${workspaceRoot}/config/mbed/scripts",
                "${env:OPENOCD_PATH/scripts}"
            ],
            "configFiles": ["${input:mbedTarget}.tcl"],
            "overrideLaunchCommands": [
                "monitor reset halt",
                "monitor program {./build-${input:mbedTarget}/${input:mbedFlashProfile}/chip-mbed-unit-tests.hex}",
                "monitor reset run",
                "quit"
            ],
            "numberOfProcessors": 2,
            "targetProcessor": 1, // Set to 0 for the CM0+, set to 1 for the CM4
            "showDevDebugOutput": false // When set to true, displays output of GDB.
        },

        {
            "name": "Flash Mbed unit tests [remote]",
            "type": "cortex-debug",
            "request": "launch",
            "cwd": "${workspaceRoot}/src/test_driver/mbed/unit_tests",
            "executable": "./build-${input:mbedTarget}/${input:mbedFlashProfile}/chip-mbed-unit-tests.elf",
            "armToolchainPath": "${env:PW_ENVIRONMENT_ROOT}/cipd/packages/arm/bin/", // Pigweed environment bootstraping required
            "servertype": "external",
            "gdbTarget": "host.docker.internal:3334", //port 3333 for the CM0+, 3334 for the CM4
            "overrideLaunchCommands": [
                "monitor reset halt",
                "load ./build-${input:mbedTarget}/${input:mbedFlashProfile}/chip-mbed-unit-tests.hex",
                "monitor reset run",
                "quit"
            ],
            "showDevDebugOutput": false // When set to true, displays output of GDB.
        },

        {
            "name": "Debug Mbed bootloader",
            "type": "cortex-debug",
            "request": "launch",
            "cwd": "${workspaceRoot}/examples/platform/mbed/bootloader",
            "executable": "./build-${input:mbedTarget}/${input:mbedDebugProfile}/chip-mbed-bootloader.elf",
            "armToolchainPath": "${env:PW_ENVIRONMENT_ROOT}/cipd/packages/arm/bin/", // Pigweed environment bootstraping required
            "servertype": "openocd",
            "serverpath": "${env:OPENOCD_PATH}/bin/openocd",
            "searchDir": [
                "${workspaceRoot}/config/mbed/scripts",
                "${env:OPENOCD_PATH}/scripts"
            ],
            "configFiles": ["${input:mbedTarget}.tcl"],
            "overrideLaunchCommands": [
                "-enable-pretty-printing",
                "monitor program {./build-${input:mbedTarget}/${input:mbedDebugProfile}/chip-mbed-bootloader.hex}",
                "monitor reset run",
                "monitor sleep 200",
                "monitor psoc6 reset_halt sysresetreq"
            ],
            "numberOfProcessors": 2,
            "targetProcessor": 1, // Set to 0 for the CM0+, set to 1 for the CM4
            "overrideRestartCommands": [
                "monitor reset init",
                "monitor reset run",
                "monitor sleep 200",
                "monitor psoc6 reset_halt sysresetreq"
            ],
            "runToMain": true, // if true, program will halt at main. Not used for a restart
            "showDevDebugOutput": false // When set to true, displays output of GDB.
        },

        {
            "name": "Debug Mbed bootloader [remote]",
            "type": "cortex-debug",
            "request": "launch",
            "cwd": "${workspaceRoot}/examples/platform/mbed/bootloader",
            "executable": "./build-${input:mbedTarget}/${input:mbedDebugProfile}/chip-mbed-bootloader.elf",
            "armToolchainPath": "${env:PW_ENVIRONMENT_ROOT}/cipd/packages/arm/bin/", // Pigweed environment bootstraping required
            "servertype": "external",
            "gdbTarget": "host.docker.internal:3334", //port 3333 for the CM0+, 3334 for the CM4
            "overrideLaunchCommands": [
                "-enable-pretty-printing",
                "monitor reset halt",
                "load ./build-${input:mbedTarget}/${input:mbedDebugProfile}/chip-mbed-bootloader.hex",
                "monitor reset run",
                "monitor sleep 200",
                "monitor psoc6 reset_halt sysresetreq"
            ],
            "overrideRestartCommands": [
                "monitor reset init",
                "monitor reset run",
                "monitor sleep 200",
                "monitor psoc6 reset_halt sysresetreq"
            ],
            "runToMain": true, // if true, program will halt at main. Not used for a restart
            "showDevDebugOutput": false // When set to true, displays output of GDB.
        },

        {
            "name": "CHIP All Clusters App (Linux)",
            "type": "lldb",
            "request": "launch",
            "program": "${workspaceFolder}/out/debug/standalone/chip-all-clusters-app",
            "cwd": "${workspaceFolder}"
        },

        {
            "name": "Fabric Admin (Linux)",
            "type": "lldb",
            "request": "launch",
            "program": "${workspaceFolder}/out/debug/standalone/fabric-admin",
            "args": ["--log-file-path", "/tmp/fabric_admin.log"],
            "cwd": "${workspaceFolder}"
        },

        {
            "name": "Fabric Bridge App (Linux)",
            "type": "lldb",
            "request": "launch",
            "program": "${workspaceFolder}/out/debug/standalone/fabric-bridge-app",
            "cwd": "${workspaceFolder}"
        },

        {
            "name": "Fabric Sync (Linux)",
            "type": "lldb",
            "request": "launch",
            "program": "${workspaceFolder}/out/debug/standalone/fabric-sync",
            "cwd": "${workspaceFolder}"
        },

        {
            "name": "OTA Requestor App (Linux)",
            "type": "lldb",
            "request": "launch",
            "program": "${workspaceFolder}/out/ota-requestor/chip-ota-requestor-app",
            "args": [
                "--discriminator",
                "18",
                "--secured-device-port",
                "5560",
                "--KVS",
                "/tmp/chip_kvs_requestor"
            ],
            "cwd": "${workspaceFolder}"
        },

        {
            "name": "OTA Provider App (Linux)",
            "type": "lldb",
            "request": "launch",
            "program": "${workspaceFolder}/out/ota-provider/chip-ota-provider-app",
            "args": [
                "--discriminator",
                "22",
                "--KVS",
                "/tmp/chip_kvs_provider",
                "--filepath",
                "/tmp/ota-image.bin"
            ],
            "cwd": "${workspaceFolder}"
        },

        {
            "name": "Debug Open IoT SDK example application",
            "type": "cortex-debug",
            "request": "launch",
            "cwd": "${workspaceRoot}/examples/${input:openiotsdkExample}/openiotsdk",
            "executable": "./build/chip-openiotsdk-${input:openiotsdkExample}-example.elf",
            "armToolchainPath": "${env:PW_ENVIRONMENT_ROOT}/cipd/packages/arm/bin/",
            "servertype": "external",
            "gdbTarget": "${input:openiotsdkRemoteHost}:31627", //GDBserver port on FVP
            "overrideLaunchCommands": [
                "-enable-pretty-printing",
                "add-symbol-file ./build/bl2.elf 0x10000000",
                "add-symbol-file ./build/tfm_s.elf 0x38000400",
                "add-symbol-file ./build/chip-openiotsdk-${input:openiotsdkExample}-example_ns.elf 0x28060400",
                "break main_ns.cpp:main"
            ],
            "runToEntryPoint": "main",
            "preLaunchTask": "Debug Open IoT SDK example",
            "showDevDebugOutput": "parsed"
        },
        {
            "name": "Debug Open IoT SDK unit-tests application",
            "type": "cortex-debug",
            "request": "launch",
            "cwd": "${workspaceRoot}/src/test_driver/openiotsdk/unit-tests",
            "executable": "./build/${input:openiotsdkUnitTest}.elf",
            "armToolchainPath": "${env:PW_ENVIRONMENT_ROOT}/cipd/packages/arm/bin/",
            "servertype": "external",
            "gdbTarget": ":31627", //GDBserver port on FVP
            "overrideLaunchCommands": [
                "-enable-pretty-printing",
                "add-symbol-file ./build/bl2.elf 0x10000000",
                "add-symbol-file ./build/tfm_s.elf 0x38000400",
                "add-symbol-file ./build/${input:openiotsdkUnitTest}_ns.elf 0x28060400",
                "break main_ns.cpp:main"
            ],
            "runToEntryPoint": "main",
            "preLaunchTask": "Debug Open IoT SDK unit-tests",
            "showDevDebugOutput": "parsed"
        }
    ],
    "inputs": [
        {
            "type": "command",
            "id": "outAppDarwin",
            "command": "shellCommand.execute",
            "args": {
                "command": "find ${workspaceFolder}/out/darwin-x64-* -maxdepth 2 -perm +111 -name 'chip-*' |sort |sed 's$${workspaceFolder}/out/$$'",
                "description": "Select the application to run"
            }
        },
        {
            "type": "command",
            "id": "outAppLinux",
            "command": "shellCommand.execute",
            "args": {
                "command": "find ${workspaceFolder}/out/linux-x64-* -maxdepth 2 -executable -name 'chip-*' |sort |sed 's$${workspaceFolder}/out/$$'",
                "description": "Select the application to run"
            }
        },
        {
            "type": "command",
            "id": "outTestLinux",
            "command": "shellCommand.execute",
            "args": {
                "command": "find ${workspaceFolder}/out/linux-x64-*/tests -type f -executable |sort |sed 's$${workspaceFolder}/out/$$'",
                "description": "Select the test to run"
            }
        },
        {
            "type": "pickString",
            "id": "mbedDebugProfile",
            "description": "What mbed profile do you want to debug?",
            "options": ["debug", "develop"],
            "default": "debug"
        },
        {
            "type": "pickString",
            "id": "mbedFlashProfile",
            "description": "What mbed profile do you want to flash?",
            "options": ["release", "debug", "develop"],
            "default": "release"
        },
        {
            "type": "pickString",
            "id": "mbedApp",
            "description": "What mbed application do you want to use?",
            "options": [
                "lock-app",
                "lighting-app",
                "pigweed-app",
                "all-clusters-app",
                "shell",
                "ota-requestor-app"
            ],
            "default": "lock-app"
        },
        {
            "type": "pickString",
            "id": "mbedTarget",
            "description": "What mbed target do you want to use?",
            "options": ["CY8CPROTO_062_4343W"],
            "default": "CY8CPROTO_062_4343W"
        },
        {
            "type": "command",
            "id": "openiotsdkExample",
            "command": "shellCommand.execute",
            "args": {
                "command": "cat examples/platform/openiotsdk/supported_examples.txt",
                "description": "What Open IoT SDK example application do you want to use?"
            }
        },
        {
            "type": "promptString",
            "id": "openiotsdkRemoteHost",
            "description": "Type the hostname/IP address of external GDB target that you want to connect to. Leave blank for internal GDB server",
            "default": ""
        },
        {
            "type": "command",
            "id": "openiotsdkUnitTest",
            "command": "shellCommand.execute",
            "args": {
                "command": "cat src/test_driver/openiotsdk/unit-tests/test_components.txt",
                "description": "What Open IoT SDK unit test application do you want to use?"
            }
        }
    ]
}