| /* |
| * |
| * Copyright (c) 2020-2021 Project CHIP Authors |
| * Copyright (c) 2018 Google LLC. |
| * Copyright (c) 2013-2018 Nest Labs, Inc. |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| /** |
| * This file implements Inet::UDPEndPoint using LwIP. |
| */ |
| |
| #include <inet/UDPEndPointImplLwIP.h> |
| |
| #if CHIP_HAVE_CONFIG_H |
| #include <lwip/lwip_buildconfig.h> // nogncheck |
| #endif // CHIP_HAVE_CONFIG_H |
| |
| #if INET_CONFIG_ENABLE_IPV4 |
| #include <lwip/igmp.h> |
| #endif // INET_CONFIG_ENABLE_IPV4 |
| |
| #include <lwip/init.h> |
| #include <lwip/ip.h> |
| #include <lwip/mld6.h> |
| #include <lwip/netif.h> |
| #include <lwip/raw.h> |
| #include <lwip/udp.h> |
| |
| static_assert(LWIP_VERSION_MAJOR > 1, "CHIP requires LwIP 2.0 or later"); |
| |
| #if !defined(RAW_FLAGS_MULTICAST_LOOP) || !defined(UDP_FLAGS_MULTICAST_LOOP) || !defined(raw_clear_flags) || \ |
| !defined(raw_set_flags) || !defined(udp_clear_flags) || !defined(udp_set_flags) |
| #define HAVE_LWIP_MULTICAST_LOOP 0 |
| #else |
| #define HAVE_LWIP_MULTICAST_LOOP 1 |
| #endif // !defined(RAW_FLAGS_MULTICAST_LOOP) || !defined(UDP_FLAGS_MULTICAST_LOOP) || !defined(raw_clear_flags) || |
| // !defined(raw_set_flags) || !defined(udp_clear_flags) || !defined(udp_set_flags) |
| |
| // unusual define check for LWIP_IPV6_ND is because espressif fork |
| // of LWIP does not define the _ND constant. |
| #if LWIP_IPV6_MLD && (!defined(LWIP_IPV6_ND) || LWIP_IPV6_ND) && LWIP_IPV6 |
| #define HAVE_IPV6_MULTICAST |
| #else |
| // Within Project CHIP multicast support is highly desirable: used for mDNS |
| // as well as group communication. |
| #undef HAVE_IPV6_MULTICAST |
| #endif |
| |
| namespace chip { |
| namespace Inet { |
| |
| EndpointQueueFilter * UDPEndPointImplLwIP::sQueueFilter = nullptr; |
| |
| CHIP_ERROR UDPEndPointImplLwIP::BindImpl(IPAddressType addressType, const IPAddress & address, uint16_t port, |
| InterfaceId interfaceId) |
| { |
| // Make sure we have the appropriate type of PCB. |
| CHIP_ERROR res = GetPCB(addressType); |
| |
| // Bind the PCB to the specified address/port. |
| ip_addr_t ipAddr; |
| if (res == CHIP_NO_ERROR) |
| { |
| res = address.ToLwIPAddr(addressType, ipAddr); |
| } |
| |
| if (res == CHIP_NO_ERROR) |
| { |
| res = chip::System::MapErrorLwIP(RunOnTCPIPRet([this, &ipAddr, port]() { return udp_bind(mUDP, &ipAddr, port); })); |
| } |
| |
| if (res == CHIP_NO_ERROR) |
| { |
| res = LwIPBindInterface(mUDP, interfaceId); |
| } |
| |
| return res; |
| } |
| |
| CHIP_ERROR UDPEndPointImplLwIP::BindInterfaceImpl(IPAddressType addrType, InterfaceId intfId) |
| { |
| // NOTE: this only supports LwIP interfaces whose number is no bigger than 9. |
| |
| // Make sure we have the appropriate type of PCB. |
| CHIP_ERROR err = GetPCB(addrType); |
| |
| if (err == CHIP_NO_ERROR) |
| { |
| err = LwIPBindInterface(mUDP, intfId); |
| } |
| return err; |
| } |
| |
| CHIP_ERROR UDPEndPointImplLwIP::LwIPBindInterface(struct udp_pcb * aUDP, InterfaceId intfId) |
| { |
| struct netif * netifp = nullptr; |
| if (intfId.IsPresent()) |
| { |
| netifp = UDPEndPointImplLwIP::FindNetifFromInterfaceId(intfId); |
| if (netifp == nullptr) |
| { |
| return INET_ERROR_UNKNOWN_INTERFACE; |
| } |
| } |
| |
| RunOnTCPIP([aUDP, netifp]() { udp_bind_netif(aUDP, netifp); }); |
| return CHIP_NO_ERROR; |
| } |
| |
| InterfaceId UDPEndPointImplLwIP::GetBoundInterface() const |
| { |
| #if HAVE_LWIP_UDP_BIND_NETIF |
| struct netif * netif; |
| RunOnTCPIP([this, &netif]() { netif = netif_get_by_index(mUDP->netif_idx); }); |
| return InterfaceId(netif); |
| #else |
| return InterfaceId(mUDP->intf_filter); |
| #endif |
| } |
| |
| uint16_t UDPEndPointImplLwIP::GetBoundPort() const |
| { |
| return mUDP->local_port; |
| } |
| |
| CHIP_ERROR UDPEndPointImplLwIP::ListenImpl() |
| { |
| RunOnTCPIP([this]() { udp_recv(mUDP, LwIPReceiveUDPMessage, this); }); |
| return CHIP_NO_ERROR; |
| } |
| |
| CHIP_ERROR UDPEndPointImplLwIP::SendMsgImpl(const IPPacketInfo * pktInfo, System::PacketBufferHandle && msg) |
| { |
| assertChipStackLockedByCurrentThread(); |
| |
| const IPAddress & destAddr = pktInfo->DestAddress; |
| |
| if (!msg.HasSoleOwnership()) |
| { |
| // when retaining a buffer, the caller expects the msg to be unmodified. |
| // LwIP stack will normally prepend the packet headers as the packet traverses |
| // the UDP/IP/netif layers, which normally modifies the packet. We need to clone |
| // msg into a fresh object in this case, and queues that for transmission, leaving |
| // the original msg available after return. |
| msg = msg.CloneData(); |
| VerifyOrReturnError(!msg.IsNull(), CHIP_ERROR_NO_MEMORY); |
| } |
| |
| CHIP_ERROR res = CHIP_NO_ERROR; |
| err_t lwipErr = ERR_VAL; |
| |
| // Make sure we have the appropriate type of PCB based on the destination address. |
| res = GetPCB(destAddr.Type()); |
| if (res != CHIP_NO_ERROR) |
| { |
| return res; |
| } |
| |
| // Send the message to the specified address/port. |
| // If an outbound interface has been specified, call a specific version of the UDP sendto() |
| // function that accepts the target interface. |
| // If a source address has been specified, temporarily override the local_ip of the PCB. |
| // This results in LwIP using the given address being as the source address for the generated |
| // packet, as if the PCB had been bound to that address. |
| const IPAddress & srcAddr = pktInfo->SrcAddress; |
| const uint16_t & destPort = pktInfo->DestPort; |
| const InterfaceId & intfId = pktInfo->Interface; |
| |
| ip_addr_t lwipSrcAddr = srcAddr.ToLwIPAddr(); |
| ip_addr_t lwipDestAddr = destAddr.ToLwIPAddr(); |
| |
| ip_addr_t boundAddr; |
| ip_addr_copy(boundAddr, mUDP->local_ip); |
| |
| if (!ip_addr_isany(&lwipSrcAddr)) |
| { |
| ip_addr_copy(mUDP->local_ip, lwipSrcAddr); |
| } |
| |
| lwipErr = RunOnTCPIPRet([this, &intfId, &msg, &lwipDestAddr, destPort]() { |
| if (intfId.IsPresent()) |
| { |
| return udp_sendto_if(mUDP, System::LwIPPacketBufferView::UnsafeGetLwIPpbuf(msg), &lwipDestAddr, destPort, |
| intfId.GetPlatformInterface()); |
| } |
| else |
| { |
| return udp_sendto(mUDP, System::LwIPPacketBufferView::UnsafeGetLwIPpbuf(msg), &lwipDestAddr, destPort); |
| } |
| }); |
| |
| ip_addr_copy(mUDP->local_ip, boundAddr); |
| |
| if (lwipErr != ERR_OK) |
| { |
| res = chip::System::MapErrorLwIP(lwipErr); |
| } |
| |
| return res; |
| } |
| |
| void UDPEndPointImplLwIP::CloseImpl() |
| { |
| assertChipStackLockedByCurrentThread(); |
| |
| // Since UDP PCB is released synchronously here, but UDP endpoint itself might have to wait |
| // for destruction asynchronously, there could be more allocated UDP endpoints than UDP PCBs. |
| if (mUDP == nullptr) |
| { |
| return; |
| } |
| RunOnTCPIP([this]() { udp_remove(mUDP); }); |
| mUDP = nullptr; |
| mLwIPEndPointType = LwIPEndPointType::Unknown; |
| |
| // If there is a UDPEndPointImplLwIP::LwIPReceiveUDPMessage |
| // event pending in the event queue (SystemLayer::ScheduleLambda), we |
| // schedule a release call to the end of the queue, to ensure that the |
| // queued pointer to UDPEndPointImplLwIP is not dangling. |
| if (mDelayReleaseCount != 0) |
| { |
| Retain(); |
| CHIP_ERROR err = GetSystemLayer().ScheduleLambda([this] { Release(); }); |
| if (err != CHIP_NO_ERROR) |
| { |
| ChipLogError(Inet, "Unable to schedule lambda: %" CHIP_ERROR_FORMAT, err.Format()); |
| // There is nothing we can do here, accept the chance of racing |
| Release(); |
| } |
| } |
| } |
| |
| void UDPEndPointImplLwIP::Free() |
| { |
| Close(); |
| Release(); |
| } |
| |
| void UDPEndPointImplLwIP::HandleDataReceived(System::PacketBufferHandle && msg, IPPacketInfo * pktInfo) |
| { |
| // Process packet filter if needed. May cause packet to get dropped before processing. |
| bool dropPacket = false; |
| if ((pktInfo != nullptr) && (sQueueFilter != nullptr)) |
| { |
| auto outcome = sQueueFilter->FilterAfterDequeue(this, *pktInfo, msg); |
| dropPacket = (outcome == EndpointQueueFilter::FilterOutcome::kDropPacket); |
| } |
| |
| // Process actual packet if allowed |
| if ((mState == State::kListening) && (OnMessageReceived != nullptr) && !dropPacket) |
| { |
| if (pktInfo != nullptr) |
| { |
| const IPPacketInfo pktInfoCopy = *pktInfo; // copy the address info so that the app can free the |
| // PacketBuffer without affecting access to address info. |
| OnMessageReceived(this, std::move(msg), &pktInfoCopy); |
| } |
| else |
| { |
| if (OnReceiveError != nullptr) |
| { |
| OnReceiveError(this, CHIP_ERROR_INBOUND_MESSAGE_TOO_BIG, nullptr); |
| } |
| } |
| } |
| Platform::Delete(pktInfo); |
| } |
| |
| CHIP_ERROR UDPEndPointImplLwIP::GetPCB(IPAddressType addrType) |
| { |
| assertChipStackLockedByCurrentThread(); |
| |
| // If a PCB hasn't been allocated yet... |
| if (mUDP == nullptr) |
| { |
| // Allocate a PCB of the appropriate type. |
| if (addrType == IPAddressType::kIPv6) |
| { |
| RunOnTCPIP([this]() { mUDP = udp_new_ip_type(IPADDR_TYPE_V6); }); |
| } |
| #if INET_CONFIG_ENABLE_IPV4 |
| else if (addrType == IPAddressType::kIPv4) |
| { |
| RunOnTCPIP([this]() { mUDP = udp_new_ip_type(IPADDR_TYPE_V4); }); |
| } |
| #endif // INET_CONFIG_ENABLE_IPV4 |
| else |
| { |
| return INET_ERROR_WRONG_ADDRESS_TYPE; |
| } |
| |
| // Fail if the system has run out of PCBs. |
| if (mUDP == nullptr) |
| { |
| ChipLogError(Inet, "Unable to allocate UDP PCB"); |
| return CHIP_ERROR_NO_MEMORY; |
| } |
| |
| // Allow multiple bindings to the same port. |
| ip_set_option(mUDP, SOF_REUSEADDR); |
| } |
| |
| // Otherwise, verify that the existing PCB is the correct type... |
| else |
| { |
| IPAddressType pcbAddrType; |
| |
| // Get the address type of the existing PCB. |
| switch (static_cast<lwip_ip_addr_type>(IP_GET_TYPE(&mUDP->local_ip))) |
| { |
| case IPADDR_TYPE_V6: |
| pcbAddrType = IPAddressType::kIPv6; |
| break; |
| #if INET_CONFIG_ENABLE_IPV4 |
| case IPADDR_TYPE_V4: |
| pcbAddrType = IPAddressType::kIPv4; |
| break; |
| #endif // INET_CONFIG_ENABLE_IPV4 |
| default: |
| return INET_ERROR_WRONG_ADDRESS_TYPE; |
| } |
| |
| // Fail if the existing PCB is not the correct type. |
| VerifyOrReturnError(addrType == pcbAddrType, INET_ERROR_WRONG_ADDRESS_TYPE); |
| } |
| |
| return CHIP_NO_ERROR; |
| } |
| |
| void UDPEndPointImplLwIP::LwIPReceiveUDPMessage(void * arg, struct udp_pcb * pcb, struct pbuf * p, const ip_addr_t * addr, |
| u16_t port) |
| { |
| UDPEndPointImplLwIP * ep = static_cast<UDPEndPointImplLwIP *>(arg); |
| if (ep->mState == State::kClosed) |
| { |
| return; |
| } |
| |
| auto pktInfo = Platform::MakeUnique<IPPacketInfo>(); |
| if (pktInfo.get() == nullptr) |
| { |
| ChipLogError(Inet, "Cannot allocate packet info"); |
| return; |
| } |
| |
| System::PacketBufferHandle buf = System::PacketBufferHandle::Adopt(p); |
| if (buf->HasChainedBuffer()) |
| { |
| buf->CompactHead(); |
| } |
| if (buf->HasChainedBuffer()) |
| { |
| // Have to allocate a new big-enough buffer and copy. |
| uint16_t messageSize = buf->TotalLength(); |
| System::PacketBufferHandle copy = System::PacketBufferHandle::New(messageSize, 0); |
| if (copy.IsNull() || buf->Read(copy->Start(), messageSize) != CHIP_NO_ERROR) |
| { |
| ChipLogError(Inet, "No memory to flatten incoming packet buffer chain of size %u", buf->TotalLength()); |
| return; |
| } |
| buf = std::move(copy); |
| } |
| |
| pktInfo->SrcAddress = IPAddress(*addr); |
| pktInfo->DestAddress = IPAddress(*ip_current_dest_addr()); |
| pktInfo->Interface = InterfaceId(ip_current_netif()); |
| pktInfo->SrcPort = port; |
| pktInfo->DestPort = pcb->local_port; |
| |
| auto filterOutcome = EndpointQueueFilter::FilterOutcome::kAllowPacket; |
| if (sQueueFilter != nullptr) |
| { |
| filterOutcome = sQueueFilter->FilterBeforeEnqueue(ep, *(pktInfo.get()), buf); |
| } |
| |
| if (filterOutcome != EndpointQueueFilter::FilterOutcome::kAllowPacket) |
| { |
| // Logging, if any, should be at the choice of the filter impl at time of filtering. |
| return; |
| } |
| |
| // Increase mDelayReleaseCount to delay release of this UDP EndPoint while the HandleDataReceived call is |
| // pending on it. |
| ep->mDelayReleaseCount++; |
| |
| CHIP_ERROR err = ep->GetSystemLayer().ScheduleLambda( |
| [ep, p = System::LwIPPacketBufferView::UnsafeGetLwIPpbuf(buf), pktInfo = pktInfo.get()] { |
| ep->mDelayReleaseCount--; |
| |
| auto handle = System::PacketBufferHandle::Adopt(p); |
| ep->HandleDataReceived(std::move(handle), pktInfo); |
| }); |
| |
| if (err == CHIP_NO_ERROR) |
| { |
| // If ScheduleLambda() succeeded, it has ownership of the buffer, so we need to release it (without freeing it). |
| static_cast<void>(std::move(buf).UnsafeRelease()); |
| // Similarly, ScheduleLambda now has ownership of pktInfo. |
| pktInfo.release(); |
| } |
| else |
| { |
| // On failure to enqueue the processing, we have to tell the filter that |
| // the packet is basically dequeued, if it tries to keep track of the lifecycle. |
| if (sQueueFilter != nullptr) |
| { |
| (void) sQueueFilter->FilterAfterDequeue(ep, *(pktInfo.get()), buf); |
| ChipLogError(Inet, "Dequeue ERROR err = %" CHIP_ERROR_FORMAT, err.Format()); |
| } |
| |
| ep->mDelayReleaseCount--; |
| } |
| } |
| |
| CHIP_ERROR UDPEndPointImplLwIP::SetMulticastLoopback(IPVersion aIPVersion, bool aLoopback) |
| { |
| #if HAVE_LWIP_MULTICAST_LOOP |
| if (mLwIPEndPointType == LwIPEndPointType::UDP) |
| { |
| if (aLoopback) |
| { |
| udp_set_flags(mUDP, UDP_FLAGS_MULTICAST_LOOP); |
| } |
| else |
| { |
| udp_clear_flags(mUDP, UDP_FLAGS_MULTICAST_LOOP); |
| } |
| return CHIP_NO_ERROR; |
| } |
| #endif // HAVE_LWIP_MULTICAST_LOOP |
| return CHIP_ERROR_UNSUPPORTED_CHIP_FEATURE; |
| } |
| |
| #if INET_CONFIG_ENABLE_IPV4 |
| CHIP_ERROR UDPEndPointImplLwIP::IPv4JoinLeaveMulticastGroupImpl(InterfaceId aInterfaceId, const IPAddress & aAddress, bool join) |
| { |
| #if LWIP_IPV4 && LWIP_IGMP |
| const ip4_addr_t lIPv4Address = aAddress.ToIPv4(); |
| struct netif * lNetif = nullptr; |
| if (aInterfaceId.IsPresent()) |
| { |
| lNetif = FindNetifFromInterfaceId(aInterfaceId); |
| VerifyOrReturnError(lNetif != nullptr, INET_ERROR_UNKNOWN_INTERFACE); |
| } |
| |
| err_t lStatus = RunOnTCPIPRet([lNetif, &lIPv4Address, join]() { |
| if (lNetif != nullptr) |
| { |
| return join ? igmp_joingroup_netif(lNetif, &lIPv4Address) // |
| : igmp_leavegroup_netif(lNetif, &lIPv4Address); |
| } |
| else |
| { |
| return join ? igmp_joingroup(IP4_ADDR_ANY4, &lIPv4Address) // |
| : igmp_leavegroup(IP4_ADDR_ANY4, &lIPv4Address); |
| } |
| }); |
| |
| if (lStatus == ERR_MEM) |
| { |
| return CHIP_ERROR_NO_MEMORY; |
| } |
| return chip::System::MapErrorLwIP(lStatus); |
| #else // LWIP_IPV4 && LWIP_IGMP |
| return CHIP_ERROR_UNSUPPORTED_CHIP_FEATURE; |
| #endif // LWIP_IPV4 && LWIP_IGMP |
| } |
| #endif // INET_CONFIG_ENABLE_IPV4 |
| |
| CHIP_ERROR UDPEndPointImplLwIP::IPv6JoinLeaveMulticastGroupImpl(InterfaceId aInterfaceId, const IPAddress & aAddress, bool join) |
| { |
| #ifdef HAVE_IPV6_MULTICAST |
| const ip6_addr_t lIPv6Address = aAddress.ToIPv6(); |
| struct netif * lNetif = nullptr; |
| if (aInterfaceId.IsPresent()) |
| { |
| lNetif = FindNetifFromInterfaceId(aInterfaceId); |
| VerifyOrReturnError(lNetif != nullptr, INET_ERROR_UNKNOWN_INTERFACE); |
| } |
| |
| err_t lStatus = RunOnTCPIPRet([lNetif, &lIPv6Address, join]() { |
| if (lNetif != nullptr) |
| { |
| return join ? mld6_joingroup_netif(lNetif, &lIPv6Address) // |
| : mld6_leavegroup_netif(lNetif, &lIPv6Address); |
| } |
| else |
| { |
| return join ? mld6_joingroup(IP6_ADDR_ANY6, &lIPv6Address) // |
| : mld6_leavegroup(IP6_ADDR_ANY6, &lIPv6Address); |
| } |
| }); |
| |
| if (lStatus == ERR_MEM) |
| { |
| return CHIP_ERROR_NO_MEMORY; |
| } |
| |
| return chip::System::MapErrorLwIP(lStatus); |
| #else // HAVE_IPV6_MULTICAST |
| return CHIP_ERROR_UNSUPPORTED_CHIP_FEATURE; |
| #endif // HAVE_IPV6_MULTICAST |
| } |
| |
| struct netif * UDPEndPointImplLwIP::FindNetifFromInterfaceId(InterfaceId aInterfaceId) |
| { |
| struct netif * lRetval = nullptr; |
| |
| RunOnTCPIP([aInterfaceId, &lRetval]() { |
| #if defined(NETIF_FOREACH) |
| NETIF_FOREACH(lRetval) |
| { |
| if (lRetval == aInterfaceId.GetPlatformInterface()) |
| { |
| break; |
| } |
| } |
| #else // defined(NETIF_FOREACH) |
| for (lRetval = netif_list; lRetval != nullptr && lRetval != aInterfaceId.GetPlatformInterface(); lRetval = lRetval->next) |
| ; |
| #endif // defined(NETIF_FOREACH) |
| }); |
| |
| return (lRetval); |
| } |
| |
| } // namespace Inet |
| } // namespace chip |