All Devices App for Telink

This example demonstrates a dynamic Matter device application for the Telink platform.

The device type is selected at runtime using shell commands and stored in persistent storage. On the next boot, the stored device type is restored automatically.

For the general application overview, supported devices, and common usage, see: All Devices App

Build

Initialize the environment:

source ./scripts/activate.sh -p all,telink

Build:

./scripts/build/build_examples.py --target telink-tlsr9518adk80d-all-devices build

Build output:

out/telink-tlsr9518adk80d-all-devices/

Application binary:

out/telink-tlsr9518adk80d-all-devices/zephyr/merged.bin

Flash:

west flash --erase

UART:

screen /dev/ttyUSB0 115200

First Boot

Set the device type from the device shell:

devtype set <device-type>

Example:

devtype set contact-sensor

The Matter server starts after the device type is selected.

Next boots

The selected device type is restored automatically from persistent storage.

Change device type

Factory reset the device:

matter device factoryreset

Reboot the device:

telink reboot

Then select a new device type:

devtype set <device-type>

Commissioning examples

Wi-Fi:

./chip-tool pairing ble-wifi 1234 <ssid> <password> 20202021 3840

Thread:

./chip-tool pairing ble-thread 1234 hex:${DATASET} 20202021 3840

More examples: All Devices App