# Copyright (c) 2021 Project CHIP Authors
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# Auto-generated scripts for harness use only, please review before automation. The endpoints and cluster names are currently set to default

name: 65.2.2. [TC-PSCFG-2.2] Primary functionality with server as DUT

PICS:
    - PSCFG.S

config:
    nodeId: 0x12344321
    cluster: "Basic Information"
    endpoint: 0

tests:
    - label: "Preconditions:"
      verification: |
          This test case is verified after the device is provisioned. Pls provision device first, Pass appropriate nodeID in the below command
      disabled: true

    - label: "Step 1: Commission DUT to TH"
      verification: |

      disabled: true

    - label: "Step 2: TH reads the Sources attribute from the DUT"
      PICS: PSCFG.S.A0000
      verification: |
          ./chip-tool powersourceconfiguration read sources 1 0

           verify  that source attribute provides a list. The list has not more than 6 entries. Each entry in this list is a valid endpoint number.
          Each list entry is unique and there are no duplicates. on TH(chip-tool) log:
          Below is the example log which is observed in the RPI platform the value may be differ based on the dut implementation.

          [1686219805.562367][91291:91293] CHIP:DMG: }
          [1686219805.562469][91291:91293] CHIP:TOO: Endpoint: 0 Cluster: 0x0000_002E Attribute 0x0000_0000 DataVersion: 272662560
          [1686219805.562514][91291:91293] CHIP:TOO:   Sources: 3 entries
          [1686219805.562532][91291:91293] CHIP:TOO:     [1]: 2
          [1686219805.562539][91291:91293] CHIP:TOO:     [2]: 1
          [1686219805.562545][91291:91293] CHIP:TOO:     [3]: 0
          [1686219805.562596][91291:91293] CHIP:EM: <<< [E:30046i S:19475 M:182449019 (Ack:91024710)] (S) Msg TX to 1:0000000000000001 [6D93] --- Type 0000:10 (SecureChannel:StandaloneAck)
          [1686219805.562609][91291:91293] CHIP:IN: (S) Sending msg 182449019 on secure session with LSID: 19475
          [1686219805.562637][91291:91293] CHIP:EM: Flushed pending ack for MessageCounter:91024710 on exchange 30046i
      disabled: true

    - label:
          "Step 3a: TH reads the Order attribute from Power Source Cluster at
          Endpoint[eNr] of the DUT"
      verification: |
          ./chip-tool powersource read order 1 2

          verify  that order attribute succeeds with no error.The order value is the same or greater than the order value of the previous iteration on TH(chip-tool) log:
          Below is the example log which is observed in the RPI platform the value may be differ based on the dut implementation.

          [1686219827.164815][91294:91296] CHIP:DMG:         InteractionModelRevision = 1
          [1686219827.164821][91294:91296] CHIP:DMG: }
          [1686219827.164892][91294:91296] CHIP:TOO: Endpoint: 2 Cluster: 0x0000_002F Attribute 0x0000_0001 DataVersion: 2160895838
          [1686219827.164931][91294:91296] CHIP:TOO:   Order: 1
          [1686219827.164982][91294:91296] CHIP:EM: <<< [E:29044i S:64686 M:59474258 (Ack:139097391)] (S) Msg TX to 1:0000000000000001 [6D93] --- Type 0000:10 (SecureChannel:StandaloneAck)
          [1686219827.164994][91294:91296] CHIP:IN: (S) Sending msg 59474258 on secure session with LSID: 64686
          [1686219827.165022][91294:91296] CHIP:EM: Flushed pending ack for MessageCounter:139097391 on exchange 29044i


          ./chip-tool powersource read order 1 1

          verify  that order attribute succeeds with no error.The order value is the same or greater than the order value of the previous iteration on TH(chip-tool) log:
          Below is the example log which is observed in the RPI platform the value may be differ based on the dut implementation.

          [1686219840.688775][91298:91300] CHIP:DMG:         SuppressResponse = true,
          [1686219840.688780][91298:91300] CHIP:DMG:         InteractionModelRevision = 1
          [1686219840.688785][91298:91300] CHIP:DMG: }
          [1686219840.688851][91298:91300] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_002F Attribute 0x0000_0001 DataVersion: 4007458595
          [1686219840.688873][91298:91300] CHIP:TOO:   Order: 2
          [1686219840.688926][91298:91300] CHIP:EM: <<< [E:54321i S:51057 M:220237798 (Ack:216548812)] (S) Msg TX to 1:0000000000000001 [6D93] --- Type 0000:10 (SecureChannel:StandaloneAck)
          [1686219840.688937][91298:91300] CHIP:IN: (S) Sending msg 220237798 on secure session with LSID: 51057
          [1686219840.688962][91298:91300] CHIP:EM: Flushed pending ack for MessageCounter:216548812 on exchange 54321i
          [1686219840.689057][91298:91298] CHIP:CTL: Shutting down the commissioner


          ./chip-tool powersource read order 1 0

          verify  that order attribute succeeds with no error.The order value is the same or greater than the order value of the previous iteration on TH(chip-tool) log:
          Below is the example log which is observed in the RPI platform the value may be differ based on the dut implementation.

          [1686219853.940142][91302:91304] CHIP:DMG: }
          [1686219853.940215][91302:91304] CHIP:TOO: Endpoint: 0 Cluster: 0x0000_002F Attribute 0x0000_0001 DataVersion: 336265014
          [1686219853.940248][91302:91304] CHIP:TOO:   Order: 3
          [1686219853.940312][91302:91304] CHIP:EM: <<< [E:50949i S:33475 M:232313504 (Ack:30099776)] (S) Msg TX to 1:0000000000000001 [6D93] --- Type 0000:10 (SecureChannel:StandaloneAck)
          [1686219853.940324][91302:91304] CHIP:IN: (S) Sending msg 232313504 on secure session with LSID: 33475
      disabled: true