# Copyright (c) 2021 Project CHIP Authors
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# Auto-generated scripts for harness use only, please review before automation. The endpoints and cluster names are currently set to default

name: 74.3.2. [TC-SWTCH-3.2] Primary functionality with client as DUT

PICS:
    - SWTCH.C
    - MCORE.IDM.C.SubscribeEvent

config:
    nodeId: 0x12344321
    cluster: "Basic Information"
    endpoint: 0

tests:
    - label: "Note"
      verification: |
          For DUT as client test cases, Chip-tool command used below are an example to verify the functionality. For certification test, we expect DUT should have a capability or way to run the equivalent command.
      disabled: true

    - label: "Note"
      verification: |
          NOTE: https://github.com/project-chip/connectedhomeip/tree/master/examples/all-clusters-app/linux#readme
          Events to be executed as following
          1. Compile app using below command in connectedhomeip folder
          a. ./scripts/run_in_build_env.sh ./scripts/build/build_examples.py --target linux-arm64-all-clusters-no-ble-asan-clang build
          2. Build respective app (all-clusters-app)
          3. Commission DUT to TH
          4. Open 2nd terminal of DUT and provide the below command to obtain PID of DUT
          ps  -aef|grep all-clusters-app
          5. Follow the Verification step below to generate the event in 2nd terminal of DUT
      disabled: true

    - label:
          "Step 0a: FAIL the test - at least one of SWTCH.C.F00(LS) and
          SWTCH.C.F01(MS) has to be supported"
      PICS: "!SWTCH.C.F00 && !SWTCH.C.F01"
      verification: |
          no messages needed, TH checks consistency of PICS flags
      disabled: true

    - label:
          "Step 0b: FAIL the test - when supporting SWTCH.C.F02(MSR) also
          SWTCH.C.F01(MS) must be supported"
      PICS: SWTCH.C.F02 && !SWTCH.C.F01
      verification: |
          no messages needed, TH checks consistency of PICS flags
      disabled: true

    - label:
          "Step 0c: FAIL the test - when supporting SWTCH.C.F03(MSL) also
          SWTCH.C.F01(MS) must be supported"
      PICS: SWTCH.C.F03 && !SWTCH.C.F01
      verification: |
          no messages needed, TH checks consistency of PICS flags
      disabled: true

    - label:
          "Step 0d: FAIL the test - when supporting SWTCH.C.F03(MSL) also
          SWTCH.C.F02(MSR) must be supported"
      PICS: SWTCH.C.F03 && !SWTCH.C.F02
      verification: |
          no messages needed, TH checks consistency of PICS flags
      disabled: true

    - label:
          "Step 0e: FAIL the test - when supporting SWTCH.C.F04(MSM) also
          SWTCH.C.F01(MS) must be supported"
      PICS: SWTCH.C.F04 && !SWTCH.C.F01
      verification: |
          no messages needed, TH checks consistency of PICS flags
      disabled: true

    - label:
          "Step 0f: FAIL the test - when supporting SWTCH.C.F04(MSM) also
          SWTCH.C.F02(MSR) must be supported"
      PICS: SWTCH.C.F04 && !SWTCH.C.F02
      verification: |
          no messages needed, TH checks consistency of PICS flags
      disabled: true

    - label:
          "Step 0g: FAIL the test - at least one of SWTCH.C.M.SwitchStatePolling
          and SWTCH.C.M.SwitchStateEventing must be supported"
      PICS: "!SWTCH.C.M.SwitchStatePolling && !SWTCH.C.M.SwitchStateEventing"
      verification: |
          no messages needed, TH checks consistency of PICS flags
      disabled: true

    - label:
          "Step 1a: Commission DUT to TH. Use client mechanism to set it up so
          switch state can be observed (e.g. UI shows state of switch) and/or
          other device is controlled (e.g. light on same fabric gets controlled
          by the switch  TH has to simulate that light). While commissioning and
          configuring, TH records and reacts to the messages relating to the
          switch functionality detailed in the steps below. The order of the
          messages received may be different from the order of the sub-steps
          1b..1d below."
      PICS: SWTCH.C.F00
      verification: |

      disabled: true

    - label: "Step 1b: DUT reads global attribute FeatureMap."
      PICS: SWTCH.C.F00
      verification: |
          ./chip-tool switch read feature-map 1 1

          Verify  FeatureMap value is 1 On TH (all-clusters-app) log and below is the sample log provided for the raspi platform:

          ReportDataMessage =
          [1671450600.457719][8426:8426] CHIP:DMG: {
          [1671450600.457728][8426:8426] CHIP:DMG:         AttributeReportIBs =
          [1671450600.457747][8426:8426] CHIP:DMG:         [
          [1671450600.457756][8426:8426] CHIP:DMG:                 AttributeReportIB =
          [1671450600.457954][8426:8426] CHIP:DMG:                 {
          [1671450600.457976][8426:8426] CHIP:DMG:                         AttributeDataIB =
          [1671450600.457991][8426:8426] CHIP:DMG:                         {
          [1671450600.458015][8426:8426] CHIP:DMG:                                 DataVersion = 0xcfe432fa,
          [1671450600.458038][8426:8426] CHIP:DMG:                                 AttributePathIB =
          [1671450600.458057][8426:8426] CHIP:DMG:                                 {
          [1671450600.458075][8426:8426] CHIP:DMG:                                         Endpoint = 0x1,
          [1671450600.458088][8426:8426] CHIP:DMG:                                         Cluster = 0x3b,
          [1671450600.458108][8426:8426] CHIP:DMG:                                         Attribute = 0x0000_FFFC,
          [1671450600.458122][8426:8426] CHIP:DMG:                                 }
          [1671450600.458137][8426:8426] CHIP:DMG:
          [1671450600.458151][8426:8426] CHIP:DMG:                                 Data = 1,
          [1671450600.458161][8426:8426] CHIP:DMG:                         },
          [1671450600.458179][8426:8426] CHIP:DMG:
          [1671450600.458188][8426:8426] CHIP:DMG:                 },
          [1671450600.458207][8426:8426] CHIP:DMG:
          [1671450600.458216][8426:8426] CHIP:DMG:         ],
          [1671450600.458242][8426:8426] CHIP:DMG:
          [1671450600.458255][8426:8426] CHIP:DMG:         SuppressResponse = true,
          [1671450600.458273][8426:8426] CHIP:DMG:         InteractionModelRevision = 1
          [1671450600.458286][8426:8426] CHIP:DMG: }
      disabled: true

    - label: "Step 1c: DUT reads attribute NumberOfPositions."
      PICS: SWTCH.C.F00
      verification: |
          ./chip-tool switch read number-of-positions 1 1

          Verify  NumberOfPositions value is 2 On TH (all-clusters-app) log and below is the sample log provided for the raspi platform:

          ReportDataMessage =
          [1671450651.817816][8426:8426] CHIP:DMG: {
          [1671450651.817819][8426:8426] CHIP:DMG:         AttributeReportIBs =
          [1671450651.817825][8426:8426] CHIP:DMG:         [
          [1671450651.817828][8426:8426] CHIP:DMG:                 AttributeReportIB =
          [1671450651.817849][8426:8426] CHIP:DMG:                 {
          [1671450651.817853][8426:8426] CHIP:DMG:                         AttributeDataIB =
          [1671450651.817858][8426:8426] CHIP:DMG:                         {
          [1671450651.817862][8426:8426] CHIP:DMG:                                 DataVersion = 0xcfe432fa,
          [1671450651.817864][8426:8426] CHIP:DMG:                                 AttributePathIB =
          [1671450651.817868][8426:8426] CHIP:DMG:                                 {
          [1671450651.817872][8426:8426] CHIP:DMG:                                         Endpoint = 0x1,
          [1671450651.817876][8426:8426] CHIP:DMG:                                         Cluster = 0x3b,
          [1671450651.817879][8426:8426] CHIP:DMG:                                         Attribute = 0x0000_0000,
          [1671450651.817882][8426:8426] CHIP:DMG:                                 }
          [1671450651.817888][8426:8426] CHIP:DMG:
          [1671450651.817892][8426:8426] CHIP:DMG:                                 Data = 2,
          [1671450651.817895][8426:8426] CHIP:DMG:                         },
          [1671450651.817901][8426:8426] CHIP:DMG:
          [1671450651.817905][8426:8426] CHIP:DMG:                 },
          [1671450651.817910][8426:8426] CHIP:DMG:
          [1671450651.817913][8426:8426] CHIP:DMG:         ],
          [1671450651.817918][8426:8426] CHIP:DMG:
          [1671450651.817921][8426:8426] CHIP:DMG:         SuppressResponse = true,
          [1671450651.817925][8426:8426] CHIP:DMG:         InteractionModelRevision = 1
          [1671450651.817928][8426:8426] CHIP:DMG: }
      disabled: true

    - label:
          "Step 1d: DUT sets up eventing (SwitchLatched) so it will receive
          events when the switch is operated."
      PICS: SWTCH.C.F00 && SWTCH.C.M.SwitchStateEventing
      verification: |
          On Raspi platform to trigger the event give the below command by opening an another terminal in DUT (Below is the example command developed in all-clusters-app to generate the event, Vendor DUT should have capability to generate this event)

          echo '{"Name":"SwitchLatched","NewPosition":0}' > /tmp/chip_all_clusters_fifo_<PID>  (PID of DUT)

          Verify SwitchLatched event with NewPosition set to 0 on TH(all-cluster-app) log and below is the sample log provided for the raspi platform:

          [1659679728.732056][2530:2538] CHIP:-: Received payload: "{"Name":"SwitchLatched","NewPosition":0}"
          [1659679728.732389][2530:2530] CHIP:DMG: Endpoint 1, Cluster 0x0000_003B update version to ee5e7706
          [1659679728.732429][2530:2530] CHIP:-: The latching switch is moved to a new position:0
          [1659679728.732454][2530:2530] CHIP:ZCL: SwitchServer: OnSwitchLatch

          ./chip-tool switch read-event switch-latched  1 1

          Verify switch latched event has newposition set to 0 on DUT (chip-tool) logs and below is the sample log provided for the raspi platform:

          [1659679766.774013][2535:2540] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_003B Event 0x0000_0000
          [1659679766.774035][2535:2540] CHIP:TOO:          Event number: 3
          [1659679766.774055][2535:2540] CHIP:TOO:          Priority: Info
          [1659679766.774074][2535:2540] CHIP:TOO:          Timestamp: 2181028
          [1659679766.774157][2535:2540] CHIP:TOO:   SwitchLatched: {
          [1659679766.774197][2535:2540] CHIP:TOO:     NewPosition: 0
          [1659679766.774214][2535:2540] CHIP:TOO:    }
      disabled: true

    - label:
          "Step 2a: TH simulates operation of the switch by changing state
          (attribute CurrentPosition) from 0 to 1 and back every 10 seconds
          (over a 1 minute period) DUT reads attribute CurrentPosition regularly"
      PICS: SWTCH.C.F00 && SWTCH.C.M.SwitchStatePolling
      verification: |
          On Raspi platform to trigger the event give the below command by opening an another terminal in DUT (Below is the example command developed in all-clusters-app to generate the event, Vendor DUT should have capability to generate this event)

          echo '{"Name":"SwitchLatched","NewPosition":1}' > /tmp/chip_all_clusters_fifo_<PID>  (PID of DUT)

          Verify SwitchLatched event with NewPosition set to 1 on TH(all-cluster-app) log:

          [1659621148.831745][8590:8596] CHIP:-: Received payload: "{"Name":"SwitchLatched","NewPosition":1}"
          [1659621148.832236][8590:8590] CHIP:DMG: Endpoint 1, Cluster 0x0000_003B update version to 4be58f54
          [1659621148.832320][8590:8590] CHIP:-: The latching switch is moved to a new position:1
          [1659621148.832380][8590:8590] CHIP:ZCL: SwitchServer: OnSwitchLatch
          [1659621148.832494][8590:8590] CHIP:EVL: LogEvent event number: 0x0000000000000007 priority: 1, endpoint id:  0x1 cluster id: 0x0000_003B event id: 0x0 Sys timestamp: 0x00000000022D0CBB

          In parallel to this Check the CurrentPosition value.

          ./chip-tool switch read current-position 1 1

          Verify CurrentPosition value is 1 on TH (all-cluster-app) logs

          [1686292319.379553][30986:30986] CHIP:DMG: ReportDataMessage =
          [1686292319.379564][30986:30986] CHIP:DMG: {
          [1686292319.379572][30986:30986] CHIP:DMG:         AttributeReportIBs =
          [1686292319.379590][30986:30986] CHIP:DMG:         [
          [1686292319.379599][30986:30986] CHIP:DMG:                 AttributeReportIB =
          [1686292319.379616][30986:30986] CHIP:DMG:                 {
          [1686292319.379625][30986:30986] CHIP:DMG:                         AttributeDataIB =
          [1686292319.379637][30986:30986] CHIP:DMG:                         {
          [1686292319.379648][30986:30986] CHIP:DMG:                                 DataVersion = 0xbae40564,
          [1686292319.379659][30986:30986] CHIP:DMG:                                 AttributePathIB =
          [1686292319.379670][30986:30986] CHIP:DMG:                                 {
          [1686292319.379682][30986:30986] CHIP:DMG:                                         Endpoint = 0x1,
          [1686292319.379695][30986:30986] CHIP:DMG:                                         Cluster = 0x3b,
          [1686292319.379707][30986:30986] CHIP:DMG:                                         Attribute = 0x0000_0001,
          [1686292319.379717][30986:30986] CHIP:DMG:                                 }
          [1686292319.379731][30986:30986] CHIP:DMG:
          [1686292319.379744][30986:30986] CHIP:DMG:                                 Data = 1,
          [1686292319.379754][30986:30986] CHIP:DMG:                         },
          [1686292319.379769][30986:30986] CHIP:DMG:
          [1686292319.379778][30986:30986] CHIP:DMG:                 },
          [1686292319.379794][30986:30986] CHIP:DMG:
          [1686292319.379803][30986:30986] CHIP:DMG:         ],
          [1686292319.379819][30986:30986] CHIP:DMG:
          [1686292319.379829][30986:30986] CHIP:DMG:         SuppressResponse = true,
          [1686292319.379839][30986:30986] CHIP:DMG:         InteractionModelRevision = 1
          [1686292319.379847][30986:30986] CHIP:DMG: }


          TH simulates operation of the switch by changing state (attribute CurrentPosition) from 1 to 0 and  read  the CurrentPosition attribute

          After 10 seconds, repeat the command with /tmp/chip_all_clusters_fifo using with value 0 as position

          echo '{"Name":"SwitchLatched","NewPosition":0}' > /tmp/chip_all_clusters_fifo_<PID>  (PID of DUT)

          [1686292713.872327][30986:30989] CHIP:-: Received payload: "{"Name":"SwitchLatched","NewPosition":0}"
          [1686292713.872583][30986:30986] CHIP:DMG: Endpoint 1, Cluster 0x0000_003B update version to bae40566
          [1686292713.872617][30986:30986] CHIP:-: The latching switch is moved to a new position:0
          [1686292713.872629][30986:30986] CHIP:ZCL: SwitchServer: OnSwitchLatch

          ./chip-tool switch read current-position 1 1

          Verify CurrentPosition value is 0 on TH (all-cluster-app) logs

          [1686293150.796547][30986:30986] CHIP:DMG: ReportDataMessage =
          [1686293150.796549][30986:30986] CHIP:DMG: {
          [1686293150.796551][30986:30986] CHIP:DMG:         AttributeReportIBs =
          [1686293150.796555][30986:30986] CHIP:DMG:         [
          [1686293150.796557][30986:30986] CHIP:DMG:                 AttributeReportIB =
          [1686293150.796561][30986:30986] CHIP:DMG:                 {
          [1686293150.796564][30986:30986] CHIP:DMG:                         AttributeDataIB =
          [1686293150.796567][30986:30986] CHIP:DMG:                         {
          [1686293150.796570][30986:30986] CHIP:DMG:                                 DataVersion = 0xbae40566,
          [1686293150.796572][30986:30986] CHIP:DMG:                                 AttributePathIB =
          [1686293150.796575][30986:30986] CHIP:DMG:                                 {
          [1686293150.796578][30986:30986] CHIP:DMG:                                         Endpoint = 0x1,
          [1686293150.796581][30986:30986] CHIP:DMG:                                         Cluster = 0x3b,
          [1686293150.796584][30986:30986] CHIP:DMG:                                         Attribute = 0x0000_0001,
          [1686293150.796587][30986:30986] CHIP:DMG:                                 }
          [1686293150.796590][30986:30986] CHIP:DMG:
          [1686293150.796594][30986:30986] CHIP:DMG:                                 Data = 0,
          [1686293150.796597][30986:30986] CHIP:DMG:                         },
          [1686293150.796601][30986:30986] CHIP:DMG:
          [1686293150.796603][30986:30986] CHIP:DMG:                 },
          [1686293150.796607][30986:30986] CHIP:DMG:
          [1686293150.796609][30986:30986] CHIP:DMG:         ],
          [1686293150.796613][30986:30986] CHIP:DMG:
          [1686293150.796616][30986:30986] CHIP:DMG:         SuppressResponse = true,
          [1686293150.796618][30986:30986] CHIP:DMG:         InteractionModelRevision = 1
          [1686293150.796620][30986:30986] CHIP:DMG: }

          Repeat the above Steps over 1 minute period of time
      disabled: true

    - label:
          "Step 2b: TH simulates operation of the switch by changing state
          (attribute CurrentPosition) from 0 to 1 and back every 10 seconds
          (over a 1 minute period), and sending the event SwitchLatched (with
          field NewPosition reflecting the new state) on every change"
      PICS: SWTCH.C.F00 && SWTCH.C.M.SwitchStateEventing
      verification: |
          On Raspi platform to trigger the event give the below command by opening an another terminal in DUT (Below is the example command developed in all-clusters-app to generate the event, Vendor DUT should have capability to generate this event)

          echo '{"Name":"SwitchLatched","NewPosition":1}' > /tmp/chip_all_clusters_fifo_<PID>  (PID of DUT)

          Verify SwitchLatched event with NewPosition set to 1 on TH(all-cluster-app) log:

          [1659621148.831745][8590:8596] CHIP:-: Received payload: "{"Name":"SwitchLatched","NewPosition":1}"
          [1659621148.832236][8590:8590] CHIP:DMG: Endpoint 1, Cluster 0x0000_003B update version to 4be58f54
          [1659621148.832320][8590:8590] CHIP:-: The latching switch is moved to a new position:1
          [1659621148.832380][8590:8590] CHIP:ZCL: SwitchServer: OnSwitchLatch
          [1659621148.832494][8590:8590] CHIP:EVL: LogEvent event number: 0x0000000000000007 priority: 1, endpoint id:  0x1 cluster id: 0x0000_003B event id: 0x0 Sys timestamp: 0x00000000022D0CBB

          Send the SwitchLatched event on every change of position
          ./chip-tool switch read-event switch-latched  1 1

          Verify SwitchLatched Position is changing for 0 to 1 on DUT(chip-tool) Log:

          [1659680091.150093][2592:2597] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_003B Event 0x0000_0000
          [1659680091.150114][2592:2597] CHIP:TOO:          Event number: 6
          [1659680091.150135][2592:2597] CHIP:TOO:          Priority: Info
          [1659680091.150155][2592:2597] CHIP:TOO:          Timestamp: 2402459
          [1659680091.150180][2592:2597] CHIP:TOO:   SwitchLatched: {
          [1659680091.150202][2592:2597] CHIP:TOO:     NewPosition: 1
          [1659680091.150222][2592:2597] CHIP:TOO:    }
          [1659680091.150302][2592:2597] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_003B Event 0x0000_0000
          [1659680091.150324][2592:2597] CHIP:TOO:          Event number: 7
          [1659680091.150345][2592:2597] CHIP:TOO:          Priority: Info
          [1659680091.150365][2592:2597] CHIP:TOO:          Timestamp: 2431571
          [1659680091.150390][2592:2597] CHIP:TOO:   SwitchLatched: {
          [1659680091.150411][2592:2597] CHIP:TOO:     NewPosition: 0
          [1659680091.150432][2592:2597] CHIP:TOO:    }
          [1659680091.150509][2592:2597] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_003B Event 0x0000_0000
          [1659680091.150531][2592:2597] CHIP:TOO:          Event number: 8
          [1659680091.150551][2592:2597] CHIP:TOO:          Priority: Info
          [1659680091.150572][2592:2597] CHIP:TOO:          Timestamp: 2456884
          [1659680091.150597][2592:2597] CHIP:TOO:   SwitchLatched: {
          [1659680091.150630][2592:2597] CHIP:TOO:     NewPosition: 1 <= this value will change for every change in position of simulated switch

          After 10 seconds, Send the above commands with NewPosition set to 0
          Repeat above Steps back every 10 seconds (over a 1 minute period) by changing the New Position 1 to 0 and 0 to 1
      disabled: true

    - label:
          "Step 3a: Commission DUT to TH. Use client mechanism to set it up so
          switch state can be observed (e.g. UI shows state of switch) and/or
          other device is controlled (e.g. light on same fabric gets controlled
          by the switch  TH has to simulate that light). While commissioning and
          configuring, TH records and reacts to the messages relating to the
          switch functionality detailed in the steps below. The order of the
          messages received may be different from the order of the sub-steps
          3b..3d below."
      PICS: SWTCH.C.F01
      verification: |

      disabled: true

    - label: "Step 3b: DUT reads global attribute FeatureMap"
      PICS: SWTCH.C.F01
      verification: |
          Note : Please skip this step if LATCH SWITCH feature is implemented, because a device can support either a latching switch(LS) or MS, MSR, MSL, MSM.

          In Raspi platform LS feature is implemented, So below mentioned log is for reference only

          ./chip-tool switch read feature-map 1 1

          Verify  FeatureMap value is  30 On TH (all-clusters-app) log

          CHIP:DMG: ReportDataMessage =
          [1671450600.457719][8426:8426] CHIP:DMG: {
          [1671450600.457728][8426:8426] CHIP:DMG:         AttributeReportIBs =
          [1671450600.457747][8426:8426] CHIP:DMG:         [
          [1671450600.457756][8426:8426] CHIP:DMG:                 AttributeReportIB =
          [1671450600.457954][8426:8426] CHIP:DMG:                 {
          [1671450600.457976][8426:8426] CHIP:DMG:                         AttributeDataIB =
          [1671450600.457991][8426:8426] CHIP:DMG:                         {
          [1671450600.458015][8426:8426] CHIP:DMG:                                 DataVersion = 0xcfe432fa,
          [1671450600.458038][8426:8426] CHIP:DMG:                                 AttributePathIB =
          [1671450600.458057][8426:8426] CHIP:DMG:                                 {
          [1671450600.458075][8426:8426] CHIP:DMG:                                         Endpoint = 0x1,
          [1671450600.458088][8426:8426] CHIP:DMG:                                         Cluster = 0x3b,
          [1671450600.458108][8426:8426] CHIP:DMG:                                         Attribute = 0x0000_FFFC,
          [1671450600.458122][8426:8426] CHIP:DMG:                                 }
          [1671450600.458137][8426:8426] CHIP:DMG:
          [1671450600.458151][8426:8426] CHIP:DMG:                                 Data = 30,
          [1671450600.458161][8426:8426] CHIP:DMG:                         },
          [1671450600.458179][8426:8426] CHIP:DMG:
          [1671450600.458188][8426:8426] CHIP:DMG:                 },
          [1671450600.458207][8426:8426] CHIP:DMG:
          [1671450600.458216][8426:8426] CHIP:DMG:         ],
          [1671450600.458242][8426:8426] CHIP:DMG:
          [1671450600.458255][8426:8426] CHIP:DMG:         SuppressResponse = true,
          [1671450600.458273][8426:8426] CHIP:DMG:         InteractionModelRevision = 1
          [1671450600.458286][8426:8426] CHIP:DMG: }
      disabled: true

    - label: "Step 3c: DUT reads attribute NumberOfPositions"
      PICS: SWTCH.C.F01
      verification: |
          ./chip-tool switch read number-of-positions 1 1

          Verify  NumberOfPositions value is 2 in TH (all-clusters-app) log

          DMG: ReportDataMessage =
          [1671450651.817816][8426:8426] CHIP:DMG: {
          [1671450651.817819][8426:8426] CHIP:DMG:         AttributeReportIBs =
          [1671450651.817825][8426:8426] CHIP:DMG:         [
          [1671450651.817828][8426:8426] CHIP:DMG:                 AttributeReportIB =
          [1671450651.817849][8426:8426] CHIP:DMG:                 {
          [1671450651.817853][8426:8426] CHIP:DMG:                         AttributeDataIB =
          [1671450651.817858][8426:8426] CHIP:DMG:                         {
          [1671450651.817862][8426:8426] CHIP:DMG:                                 DataVersion = 0xcfe432fa,
          [1671450651.817864][8426:8426] CHIP:DMG:                                 AttributePathIB =
          [1671450651.817868][8426:8426] CHIP:DMG:                                 {
          [1671450651.817872][8426:8426] CHIP:DMG:                                         Endpoint = 0x1,
          [1671450651.817876][8426:8426] CHIP:DMG:                                         Cluster = 0x3b,
          [1671450651.817879][8426:8426] CHIP:DMG:                                         Attribute = 0x0000_0000,
          [1671450651.817882][8426:8426] CHIP:DMG:                                 }
          [1671450651.817888][8426:8426] CHIP:DMG:
          [1671450651.817892][8426:8426] CHIP:DMG:                                 Data = 2,
          [1671450651.817895][8426:8426] CHIP:DMG:                         },
          [1671450651.817901][8426:8426] CHIP:DMG:
          [1671450651.817905][8426:8426] CHIP:DMG:                 },
          [1671450651.817910][8426:8426] CHIP:DMG:
          [1671450651.817913][8426:8426] CHIP:DMG:         ],
          [1671450651.817918][8426:8426] CHIP:DMG:
          [1671450651.817921][8426:8426] CHIP:DMG:         SuppressResponse = true,
          [1671450651.817925][8426:8426] CHIP:DMG:         InteractionModelRevision = 1
          [1671450651.817928][8426:8426] CHIP:DMG: }
      disabled: true

    - label:
          "Step 3d: DUT sets up eventing (InitialPress and ShortRelease; if
          SWTCH.C.F03(MSL) also LongPress and LongRelease) so it will receive
          events when the switch is operated"
      PICS: SWTCH.C.F01 && SWTCH.C.M.SwitchStateEventing
      verification: |
          Note : Please skip this step if LATCH SWITCH feature is implemented, because a device can support either a latching switch or a momentary switch.

          On Raspi platform to trigger the event give the below command by opening an another terminal in DUT (Below is the example command developed in all-clusters-app to generate the event, Vendor DUT should have capability to generate this event)

          echo '{"Name":"InitialPress","NewPosition":0}' > /tmp/chip_all_clusters_fifo_<PID>  (PID of DUT)

          Verify InitialPress event with NewPosition set to 0 on TH(all-cluster-app) log:

          [1659624126.646996][8590:8596] CHIP:-: Received payload: "{"Name":"InitialPress","NewPosition":0}"
          [1659624126.647380][8590:8590] CHIP:DMG: Endpoint 1, Cluster 0x0000_003B update version to 4be58f55
          [1659624126.647438][8590:8590] CHIP:-: The new position when the momentary switch starts to be pressed:1
          [1659624126.647480][8590:8590] CHIP:ZCL: SwitchServer: OnInitialPress

          ./chip-tool switch read-event initial-press  1 1

          Verify InitialPress event with NewPosition set to 0 on DUT(chip-tool) log:

          [1659683181.743214][2829:2835] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_003B Event 0x0000_0001
          [1659683181.743251][2829:2835] CHIP:TOO:          Event number: 10
          [1659683181.743285][2829:2835] CHIP:TOO:          Priority: Info
          [1659683181.743319][2829:2835] CHIP:TOO:          Timestamp: 4066882
          [1659683181.743419][2829:2835] CHIP:TOO:   InitialPress: {
          [1659683181.743470][2829:2835] CHIP:TOO:     NewPosition: 0
          [1659683181.743506][2829:2835] CHIP:TOO:    }

          echo '{"Name":"ShortRelease","PreviousPosition":0}' > /tmp/chip_all_clusters_fifo_<PID>  (PID of DUT)

          Verify ShortRelease event with PreviousPosition set to 0 on TH(all-cluster-app) log:

          [1659683678.805455][2530:2538] CHIP:-: Received payload: "{"Name":"ShortRelease","PreviousPosition":0}"
          [1659683678.805739][2530:2530] CHIP:DMG: Endpoint 1, Cluster 0x0000_003B update version to ee5e7715
          [1659683678.805777][2530:2530] CHIP:-: The the previous value of the CurrentPosition when the momentary switch has been released:1
          [1659683678.805858][2530:2530] CHIP:ZCL: SwitchServer: OnShortRelease

          ./chip-tool switch read-event short-release  1 1

          Verify ShortRelease event with PreviousPosition set to 0 on DUT(chip-tool) log:

          [1659683195.217253][2838:2843] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_003B Event 0x0000_0003
          [1659683195.217275][2838:2843] CHIP:TOO:          Event number: 11
          [1659683195.217294][2838:2843] CHIP:TOO:          Priority: Info
          [1659683195.217313][2838:2843] CHIP:TOO:          Timestamp: 4137135
          [1659683195.217377][2838:2843] CHIP:TOO:   ShortRelease: {
          [1659683195.217411][2838:2843] CHIP:TOO:     PreviousPosition: 0
          [1659683195.217432][2838:2843] CHIP:TOO:    }

          if SWTCH.C.F03, also:

          echo '{"Name":"LongPress","NewPosition":1}' > /tmp/chip_all_clusters_fifo_<PID>  (PID of DUT)

          Verify LongPress event with NewPosition set to 1 on TH(all-cluster-app) log:

          [1686294416.290491][30986:30989] CHIP:-: Received payload: "{"Name":"LongPress","NewPosition":1}"
          [1686294416.290729][30986:30986] CHIP:DMG: Endpoint 1, Cluster 0x0000_003B update version to bae40568
          [1686294416.290761][30986:30986] CHIP:-: The new position when the momentary switch has been pressed for a long time:1
          [1686294416.290775][30986:30986] CHIP:ZCL: SwitchServer: OnLongPress

          ./chip-tool switch read-event long-press  1 1

          Verify LongPress event with NewPosition set to 1 on TH(chip-tool) log:

          [1659527630.476706][4774:4779] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_003B Event 0x0000_0000
          [1659527630.476742][4774:4779] CHIP:TOO:   Event number: 5
          [1659527630.476771][4774:4779] CHIP:TOO:   Priority: Info
          [1659527630.476799][4774:4779] CHIP:TOO:   Timestamp: 29687750
          [1659527630.476887][4774:4779] CHIP:TOO:   LongPress: {
          [1659527630.476934][4774:4779] CHIP:TOO:     NewPosition: 1
          [1659527630.476969][4774:4779] CHIP:TOO:    }

          echo '{"Name":"LongRelease","PreviousPosition":1}' > /tmp/chip_all_clusters_fifo_<PID>  (PID of DUT)

          Verify LongRelease event with PreviousPosition set to 1 on TH(all-cluster-app) log:

          [1686294209.671991][30986:30989] CHIP:-: Received payload: "{"Name":"LongRelease","PreviousPosition":1}"
          [1686294209.672192][30986:30986] CHIP:DMG: Endpoint 1, Cluster 0x0000_003B update version to bae40567
          [1686294209.672219][30986:30986] CHIP:-: The the previous value of the CurrentPosition when the momentary switch has been released after having been pressed for a long time:1
          [1686294209.672229][30986:30986] CHIP:ZCL: SwitchServer: OnLongRelease

          ./chip-tool switch read-event long-release  1 1

          Verify LongRelease event with PreviousPosition set to 1 on DUT(chip-tool) log:

          [1659527630.476706][4774:4779] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_003B Event 0x0000_0000
          [1659527630.476742][4774:4779] CHIP:TOO:   Event number: 6
          [1659527630.476771][4774:4779] CHIP:TOO:   Priority: Info
          [1659527630.476799][4774:4779] CHIP:TOO:   Timestamp: 296889750
          [1659527630.476887][4774:4779] CHIP:TOO:   LongRelease: {
          [1659527630.476934][4774:4779] CHIP:TOO:     PreviousPosition: 1
          [1659527630.476969][4774:4779] CHIP:TOO:    }
      disabled: true

    - label:
          "Step 4a: TH simulates operation of the switch by repeating these
          steps (over a 1 minute period) change state (attribute
          CurrentPosition) from 0 to 1 wait 0.2 seconds change state (attribute
          CurrentPosition) from 1 to 0 wait 10 seconds DUT reads attribute
          CurrentPosition regularly"
      PICS: SWTCH.C.F01 && SWTCH.C.M.SwitchStatePolling
      verification: |
          Note : Please skip this step if LATCH SWITCH feature is implemented, because a device can support either a latching switch or a momentary switch.

          On Raspi platform to trigger the event give the below command by opening an another terminal in DUT (Below is the example command developed in all-clusters-app to generate the event, Vendor DUT should have capability to generate this event)

          change state from 0 to 1

          echo '{"Name":"InitialPress","NewPosition":1}' > /tmp/chip_all_clusters_fifo_<PID>  (PID of DUT)

          Verify InitialPress event with NewPosition set to 1 on TH(all-cluster-app) log:

          [1659624126.646996][8590:8596] CHIP:-: Received payload: "{"Name":"InitialPress","NewPosition":1}"
          [1659624126.647380][8590:8590] CHIP:DMG: Endpoint 1, Cluster 0x0000_003B update version to 4be58f55
          [1659624126.647438][8590:8590] CHIP:-: The new position when the momentary switch starts to be pressed:1
          [1659624126.647480][8590:8590] CHIP:ZCL: SwitchServer: OnInitialPress

          wait 10 seconds, Read the CurrentPosition attribute

          ./chip-tool switch read current-position 1 1

          Verify CurrentPosition value is 1 On TH(all-cluster-app) log

          [1686294581.633942][30986:30986] CHIP:DMG: ReportDataMessage =
          [1686294581.633954][30986:30986] CHIP:DMG: {
          [1686294581.633961][30986:30986] CHIP:DMG:         AttributeReportIBs =
          [1686294581.633979][30986:30986] CHIP:DMG:         [
          [1686294581.633987][30986:30986] CHIP:DMG:                 AttributeReportIB =
          [1686294581.634004][30986:30986] CHIP:DMG:                 {
          [1686294581.634014][30986:30986] CHIP:DMG:                         AttributeDataIB =
          [1686294581.634025][30986:30986] CHIP:DMG:                         {
          [1686294581.634038][30986:30986] CHIP:DMG:                                 DataVersion = 0xbae40569,
          [1686294581.634048][30986:30986] CHIP:DMG:                                 AttributePathIB =
          [1686294581.634059][30986:30986] CHIP:DMG:                                 {
          [1686294581.634071][30986:30986] CHIP:DMG:                                         Endpoint = 0x1,
          [1686294581.634083][30986:30986] CHIP:DMG:                                         Cluster = 0x3b,
          [1686294581.634095][30986:30986] CHIP:DMG:                                         Attribute = 0x0000_0001,
          [1686294581.634119][30986:30986] CHIP:DMG:                                 }
          [1686294581.634124][30986:30986] CHIP:DMG:
          [1686294581.634127][30986:30986] CHIP:DMG:                                 Data = 1,
          [1686294581.634130][30986:30986] CHIP:DMG:                         },
          [1686294581.634134][30986:30986] CHIP:DMG:
          [1686294581.634136][30986:30986] CHIP:DMG:                 },
          [1686294581.634141][30986:30986] CHIP:DMG:
          [1686294581.634143][30986:30986] CHIP:DMG:         ],
          [1686294581.634147][30986:30986] CHIP:DMG:
          [1686294581.634150][30986:30986] CHIP:DMG:         SuppressResponse = true,
          [1686294581.634152][30986:30986] CHIP:DMG:         InteractionModelRevision = 1
          [1686294581.634154][30986:30986] CHIP:DMG: }

          After 0.2 seconds, send this command

          echo '{"Name":"ShortRelease","PreviousPosition":1}' > /tmp/chip_all_clusters_fifo_<PID>  (PID of DUT)

          Verify ShortRelease event with PreviousPosition set to 1 on TH(all-cluster-app) log:

          [1659683678.805455][2530:2538] CHIP:-: Received payload: "{"Name":"ShortRelease","PreviousPosition":1}"
          [1659683678.805739][2530:2530] CHIP:DMG: Endpoint 1, Cluster 0x0000_003B update version to ee5e7715
          [1659683678.805777][2530:2530] CHIP:-: The the previous value of the CurrentPosition when the momentary switch has been released:1
          [1659683678.805858][2530:2530] CHIP:ZCL: SwitchServer: OnShortRelease

          wait 10 seconds, Read the CurrentPosition attribute

          ./chip-tool switch read current-position 1 1

          Verify CurrentPosition value is 0 On TH(all-cluster-app) log

          [1686294592.640335][30986:30986] CHIP:DMG: ReportDataMessage =
          [1686294592.640348][30986:30986] CHIP:DMG: {
          [1686294592.640360][30986:30986] CHIP:DMG:         AttributeReportIBs =
          [1686294592.640386][30986:30986] CHIP:DMG:         [
          [1686294592.640397][30986:30986] CHIP:DMG:                 AttributeReportIB =
          [1686294592.640425][30986:30986] CHIP:DMG:                 {
          [1686294592.640440][30986:30986] CHIP:DMG:                         AttributeDataIB =
          [1686294592.640456][30986:30986] CHIP:DMG:                         {
          [1686294592.640474][30986:30986] CHIP:DMG:                                 DataVersion = 0xbae4056a,
          [1686294592.640490][30986:30986] CHIP:DMG:                                 AttributePathIB =
          [1686294592.640507][30986:30986] CHIP:DMG:                                 {
          [1686294592.640525][30986:30986] CHIP:DMG:                                         Endpoint = 0x1,
          [1686294592.640543][30986:30986] CHIP:DMG:                                         Cluster = 0x3b,
          [1686294592.640563][30986:30986] CHIP:DMG:                                         Attribute = 0x0000_0001,
          [1686294592.640580][30986:30986] CHIP:DMG:                                 }
          [1686294592.640602][30986:30986] CHIP:DMG:
          [1686294592.640619][30986:30986] CHIP:DMG:                                 Data = 0,
          [1686294592.640633][30986:30986] CHIP:DMG:                         },
          [1686294592.640658][30986:30986] CHIP:DMG:
          [1686294592.640668][30986:30986] CHIP:DMG:                 },
          [1686294592.640690][30986:30986] CHIP:DMG:
          [1686294592.640702][30986:30986] CHIP:DMG:         ],
          [1686294592.640726][30986:30986] CHIP:DMG:
          [1686294592.640739][30986:30986] CHIP:DMG:         SuppressResponse = true,
          [1686294592.640755][30986:30986] CHIP:DMG:         InteractionModelRevision = 1
          [1686294592.640768][30986:30986] CHIP:DMG: }


          Repeat above steps over 1 minute period of time
      disabled: true

    - label:
          "Step 4b: TH simulates operation of the switch by repeating these
          steps (over a 1 minute period) change state (attribute
          CurrentPosition) from 0 to 1, and send the event InitialPress (with
          field NewPosition=1) wait 0.2 seconds change state (attribute
          CurrentPosition) from 1 to 0, and send the event ShortRelease (with
          field PreviousPosition=1) wait 10 seconds"
      PICS: SWTCH.C.F01 && SWTCH.C.M.SwitchStateEventing
      verification: |
          Note : Please skip this step if LATCH SWITCH feature is implemented, because a device can support either a latching switch or a momentary switch.

          On Raspi platform to trigger the event give the below command by opening an another terminal in DUT (Below is the example command developed in all-clusters-app to generate the event, Vendor DUT should have capability to generate this event)

          echo '{"Name":"InitialPress","NewPosition":1}' > /tmp/chip_all_clusters_fifo_<PID>  (PID of DUT)

          Verify InitialPress event with NewPosition set to 1 on TH(all-cluster-app) log:

          [1659624126.646996][8590:8596] CHIP:-: Received payload: "{"Name":"InitialPress","NewPosition":1}"
          [1659624126.647380][8590:8590] CHIP:DMG: Endpoint 1, Cluster 0x0000_003B update version to 4be58f55
          [1659624126.647438][8590:8590] CHIP:-: The new position when the momentary switch starts to be pressed:1
          [1659624126.647480][8590:8590] CHIP:ZCL: SwitchServer: OnInitialPress

          ./chip-tool switch read-event initial-press  1 1

          Verify InitialPress event with NewPosition set to 1 on DUT(chip-tool) log:

          [1659527630.476706][4774:4779] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_003B Event 0x0000_0000
          [1659527630.476742][4774:4779] CHIP:TOO:   Event number: 4
          [1659527630.476771][4774:4779] CHIP:TOO:   Priority: Info
          [1659527630.476799][4774:4779] CHIP:TOO:   Timestamp: 29687894
          [1659527630.476887][4774:4779] CHIP:TOO:   InitialPress: {
          [1659527630.476934][4774:4779] CHIP:TOO:     NewPosition: 1
          [1659527630.476969][4774:4779] CHIP:TOO:    }

          After 0.2 seconds, send this command

          echo '{"Name":"ShortRelease","PreviousPosition":1}' > /tmp/chip_all_clusters_fifo_<PID>  (PID of DUT)

          Verify ShortRelease event with PreviousPosition set to 1 on TH(all-cluster-app) log:

          [1659684051.064329][2530:2538] CHIP:-: Received payload: "{"Name":"ShortRelease","PreviousPosition":1}"
          [1659684051.064820][2530:2530] CHIP:DMG: Endpoint 1, Cluster 0x0000_003B update version to ee5e7716
          [1659684051.064904][2530:2530] CHIP:-: The the previous value of the CurrentPosition when the momentary switch has been released:1
          [1659684051.064994][2530:2530] CHIP:ZCL: SwitchServer: OnShortRelease

          ./chip-tool switch read-event short-release  1 1

          Verify ShortRelease event with PreviousPosition set to 1 on DUT(chip-tool) log:

          [1659527630.476706][4774:4779] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_003B Event 0x0000_0000
          [1659527630.476742][4774:4779] CHIP:TOO:   Event number: 5
          [1659527630.476771][4774:4779] CHIP:TOO:   Priority: Info
          [1659527630.476799][4774:4779] CHIP:TOO:   Timestamp: 29688000
          [1659527630.476887][4774:4779] CHIP:TOO:   ShortRelease: {
          [1659527630.476934][4774:4779] CHIP:TOO:     PreviousPosition: 1
          [1659527630.476969][4774:4779] CHIP:TOO:    }
          Repeat above steps over a 1 minute period of time
      disabled: true

    - label:
          "Step 4c: TH simulates operation of the switch by repeating these
          steps (over a 1 minute period) change state (field CurrentPosition)
          from 0 to 1, and send the event InitialPress (with field
          NewPosition=1) wait 0.75 seconds send the event LongPress (field
          NewPosition=1) wait 2 seconds change state (field CurrentPosition)
          from 1 to 0, and send the event LongRelease (with field
          PreviousPosition=1) wait 8 seconds"
      PICS: SWTCH.C.F01 && SWTCH.C.F03 && SWTCH.C.M.SwitchStateEventing
      verification: |
          Note : Please skip this step if LATCH SWITCH feature is implemented, because a device can support either a latching switch or a momentary switch.

          On Raspi platform to trigger the event give the below command by opening an another terminal in DUT (Below is the example command developed in all-clusters-app to generate the event, Vendor DUT should have capability to generate this event)

          echo '{"Name":"InitialPress","NewPosition":1}' > /tmp/chip_all_clusters_fifo_<PID>  (PID of DUT)

          Verify InitialPress event with NewPosition set to 1 on TH(all-cluster-app) log:

          [1686295316.319181][30986:30989] CHIP:-: Received payload: "{"Name":"InitialPress","NewPosition":1}"
          [1686295316.319478][30986:30986] CHIP:DMG: Endpoint 1, Cluster 0x0000_003B update version to bae4056b
          [1686295316.319509][30986:30986] CHIP:-: The new position when the momentary switch starts to be pressed:1
          [1686295316.319518][30986:30986] CHIP:ZCL: SwitchServer: OnInitialPress

          ./chip-tool switch read-event initial-press   1 1

          Verify InitialPress event with NewPosition set to 1 on TH(chip-tool) log:

          [1659527630.476706][4774:4779] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_003B Event 0x0000_0000
          [1659527630.476742][4774:4779] CHIP:TOO:   Event number: 4
          [1659527630.476771][4774:4779] CHIP:TOO:   Priority: Info
          [1659527630.476799][4774:4779] CHIP:TOO:   Timestamp: 29687000
          [1659527630.476887][4774:4779] CHIP:TOO:   InitialPress: {
          [1659527630.476934][4774:4779] CHIP:TOO:     NewPosition: 1
          [1659527630.476969][4774:4779] CHIP:TOO:    }

          After 0.75 seconds, send this command

          echo '{"Name":"LongPress","NewPosition":1}' > /tmp/chip_all_clusters_fifo_<PID>  (PID of DUT)

          Verify LongPress event with NewPosition set to 1 on TH(all-cluster-app) log:

          [1686295316.319181][30986:30989] CHIP:-: Received payload: "{"Name":"InitialPress","NewPosition":1}"
          [1686295316.319478][30986:30986] CHIP:DMG: Endpoint 1, Cluster 0x0000_003B update version to bae4056b
          [1686295316.319509][30986:30986] CHIP:-: The new position when the momentary switch starts to be pressed:1
          [1686295316.319518][30986:30986] CHIP:ZCL: SwitchServer: OnInitialPress

          ./chip-tool switch read-event long-press 1 1

          Verify LongPress event with NewPosition set to 1 on TH(chip-tool) log:

          [1659527630.476706][4774:4779] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_003B Event 0x0000_0000
          [1659527630.476742][4774:4779] CHIP:TOO:   Event number: 5
          [1659527630.476771][4774:4779] CHIP:TOO:   Priority: Info
          [1659527630.476799][4774:4779] CHIP:TOO:   Timestamp: 29687750
          [1659527630.476887][4774:4779] CHIP:TOO:   LongPress: {
          [1659527630.476934][4774:4779] CHIP:TOO:     NewPosition: 1
          [1659527630.476969][4774:4779] CHIP:TOO:    }

          After 2 seconds, send this command

          echo '{"Name":"LongRelease","PreviousPosition":1}' > /tmp/chip_all_clusters_fifo_<PID>  (PID of DUT)

          Verify LonglRelease event with PreviousPosition set to 1 on TH(all-cluster-app) log:

          [1686295393.569670][30986:30989] CHIP:-: Received payload: "{"Name":"LongRelease","PreviousPosition":1}"
          [1686295393.569925][30986:30986] CHIP:DMG: Endpoint 1, Cluster 0x0000_003B update version to bae4056d
          [1686295393.569959][30986:30986] CHIP:-: The the previous value of the CurrentPosition when the momentary switch has been released after having been pressed for a long time:1
          [1686295393.569976][30986:30986] CHIP:ZCL: SwitchServer: OnLongRelease

          ./chip-tool  switch read-event long-release 1 1

          Verify LonglRelease event with PreviousPosition set to 1 on TH(chip-tool) log:

          [1659527630.476706][4774:4779] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_003B Event 0x0000_0000
          [1659527630.476742][4774:4779] CHIP:TOO:   Event number: 6
          [1659527630.476771][4774:4779] CHIP:TOO:   Priority: Info
          [1659527630.476799][4774:4779] CHIP:TOO:   Timestamp: 296889750
          [1659527630.476887][4774:4779] CHIP:TOO:   LongRelease: {
          [1659527630.476934][4774:4779] CHIP:TOO:     PreviousPosition: 1
          [1659527630.476969][4774:4779] CHIP:TOO:    }

          Repeat above steps Over a 1 minute period of time
      disabled: true