An example was created to perform TC-MCORE-FS-1.3 test. This is a copy of original CHIP Linux Lighting Example. The difference is that this example does not use UniqueID for the device, and Revision of the device is kept to revision where it is allowed.
An example showing the use of CHIP on the Linux. The document will describe how to build and run CHIP Linux Lighting Example on Raspberry Pi. This doc is tested on Ubuntu for Raspberry Pi Server 20.04 LTS (aarch64) and Ubuntu for Raspberry Pi Desktop 20.10 (aarch64)
To cross-compile this example on x64 host and run on NXP i.MX 8M Mini EVK, see the associated README document for details.
Install tool chain
$ sudo apt-get install git gcc g++ python pkg-config libssl-dev libdbus-1-dev libglib2.0-dev ninja-build python3-venv python3-dev unzip
Build the example application:
$ cd ~/connectedhomeip/examples/lighting-app-data-mode-no-unique-id/linux $ git submodule update --init $ source third_party/connectedhomeip/scripts/activate.sh $ gn gen out/debug $ ninja -C out/debug
To delete generated executable, libraries and object files use:
$ cd ~/connectedhomeip/examples/lighting-app-data-mode-no-unique-id/linux $ rm -rf out/
Build the example with pigweed RPC
$ cd ~/connectedhomeip/examples/lighting-app-data-mode-no-unique-id/linux
$ git submodule update --init
$ source third_party/connectedhomeip/scripts/activate.sh
$ gn gen out/debug --args='import("//with_pw_rpc.gni")'
$ ninja -C out/debug
--wifi
Enables WiFi management feature. Required for WiFi commissioning.
--thread
Enables Thread management feature, requires ot-br-posix dbus daemon running. Required for Thread commissioning.
--ble-device <interface id>
Use specific bluetooth interface for BLE advertisement and connections.
interface id: the number after hci when listing BLE interfaces by hciconfig command, for example, --ble-device 1 means using hci1 interface. Default: 0.
If you want to test Echo protocol, please enable Echo handler
gn gen out/debug --args='chip_app_use_echo=true' ninja -C out/debug
Prerequisites
pi-bluetooth via APT.Building
Follow Building section of this document.
Running
[Optional] Plug USB Bluetooth dongle
Plug USB Bluetooth dongle and find its bluetooth device number. The number after hci is the bluetooth device number, 1 in this example.
$ hciconfig
hci1: Type: Primary Bus: USB
BD Address: 00:1A:7D:AA:BB:CC ACL MTU: 310:10 SCO MTU: 64:8
UP RUNNING PSCAN ISCAN
RX bytes:20942 acl:1023 sco:0 events:1140 errors:0
TX bytes:16559 acl:1011 sco:0 commands:121 errors:0
hci0: Type: Primary Bus: UART
BD Address: B8:27:EB:AA:BB:CC ACL MTU: 1021:8 SCO MTU: 64:1
UP RUNNING PSCAN ISCAN
RX bytes:8609495 acl:14 sco:0 events:217484 errors:0
TX bytes:92185 acl:20 sco:0 commands:5259 errors:0
Run Linux Lighting Example App
$ cd ~/connectedhomeip/examples/lighting-app/linux $ sudo out/debug/chip-lighting-app-data-mode-no-unique-id --ble-device [bluetooth device number] # In this example, the device we want to use is hci1 $ sudo out/debug/chip-lighting-app-data-mode-no-unique-id --ble-device 1
Test the device using ChipDeviceController on your laptop / workstation etc.
As part of building the example with RPCs enabled the chip_rpc python interactive console is installed into your venv. The python wheel files are also created in the output folder: out/debug/chip_rpc_console_wheels. To install the wheel files without rebuilding: pip3 install out/debug/chip_rpc_console_wheels/*.whl
To use the chip-rpc console after it has been installed run: chip-console -s localhost:33000 -o /<YourFolder>/pw_log.out
Then you can Get and Set the light using the RPCs: rpcs.chip.rpc.Lighting.Get()
rpcs.chip.rpc.Lighting.Set(on=True, level=128, color=protos.chip.rpc.LightingColor(hue=5, saturation=5))
Device tracing is available to analyze the device performance. To turn on tracing, build with RPC enabled. See Building with RPC enabled.
Obtain tracing json file.
$ ./{PIGWEED_REPO}/pw_trace_tokenized/py/pw_trace_tokenized/get_trace.py -s localhost:33000 \
-o {OUTPUT_FILE} -t {ELF_FILE} {PIGWEED_REPO}/pw_trace_tokenized/pw_trace_protos/trace_rpc.proto
You can send a command to lighting-app to trigger specific event via lighting-app event named pipe /tmp/chip_lighting_fifo-.
SoftwareFault eventsSoftwareFault when a software fault takes place on the Node.$ echo '{"Name":"SoftwareFault"}' > /tmp/chip_lighting_fifo-<PID>
HardwareFault eventsHardwareFaultChange to indicate a change in the set of hardware faults currently detected by the Node.$ echo '{"Name":"HardwareFaultChange"}' > /tmp/chip_lighting_fifo-<PID>
RadioFaultChange to indicate a change in the set of radio faults currently detected by the Node.$ echo '{"Name":"RadioFaultChange"}' > /tmp/chip_lighting_fifo-<PID>
NetworkFaultChange to indicate a change in the set of network faults currently detected by the Node.$ echo '{"Name":"NetworkFaultChange"}' > /tmp/chip_lighting_fifo-<PID>
BootReason to indicate the reason that caused the device to start-up, from the following set of BootReasons.PowerOnReboot The Node has booted as the result of physical interaction with the device resulting in a reboot.
BrownOutReset The Node has rebooted as the result of a brown-out of the Node’s power supply.
SoftwareWatchdogReset The Node has rebooted as the result of a software watchdog timer.
HardwareWatchdogReset The Node has rebooted as the result of a hardware watchdog timer.
SoftwareUpdateCompleted The Node has rebooted as the result of a completed software update.
SoftwareReset The Node has rebooted as the result of a software initiated reboot.
$ echo '{"Name":"<BootReason>"}' > /tmp/chip_lighting_fifo-<PID>
SwitchLatched, when the latching switch is moved to a new position.$ echo '{"Name":"SwitchLatched","NewPosition":3}' > /tmp/chip_lighting_fifo-<PID>
InitialPress, when the momentary switch starts to be pressed.$ echo '{"Name":"InitialPress","NewPosition":3}' > /tmp/chip_lighting_fifo-<PID>
LongPress, when the momentary switch has been pressed for a “long” time.$ echo '{"Name":"LongPress","NewPosition":3}' > /tmp/chip_lighting_fifo-<PID>
ShortRelease, when the momentary switch has been released.$ echo '{"Name":"ShortRelease","PreviousPosition":3}' > /tmp/chip_lighting_fifo-<PID>
LongRelease when the momentary switch has been released and after having been pressed for a long time.$ echo '{"Name":"LongRelease","PreviousPosition":3}' > /tmp/chip_lighting_fifo-<PID>
MultiPressOngoing to indicate how many times the momentary switch has been pressed in a multi-press sequence, during that sequence.$ echo '{"Name":"MultiPressOngoing","NewPosition":3,"CurrentNumberOfPressesCounted":4}' > /tmp/chip_lighting_fifo-<PID>
MultiPressComplete to indicate how many times the momentary switch has been pressed in a multi-press sequence, after it has been detected that the sequence has ended.$ echo '{"Name":"MultiPressComplete","PreviousPosition":3,"TotalNumberOfPressesCounted":2}' > /tmp/chip_lighting_fifo-<PID>