/*
 *
 *    Copyright (c) 2023 Project CHIP Authors
 *    All rights reserved.
 *
 *    Licensed under the Apache License, Version 2.0 (the "License");
 *    you may not use this file except in compliance with the License.
 *    You may obtain a copy of the License at
 *
 *        http://www.apache.org/licenses/LICENSE-2.0
 *
 *    Unless required by applicable law or agreed to in writing, software
 *    distributed under the License is distributed on an "AS IS" BASIS,
 *    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 *    See the License for the specific language governing permissions and
 *    limitations under the License.
 */

//*****************************************************************************
// Includes
//*****************************************************************************
#pragma once

//*****************************************************************************
//                 WIFI IF INTRODUCTION
//*****************************************************************************
/* This module enables an easy integration of Wi-Fi to a SimpleLink Networking
 * framework.
 * It was designed for applications that use the Wi-Fi Station role only.
 * The simple API and settings enables the user to initiate the Wi-Fi and
 * configure the provisioning method that will be used upon first connection
 * attempt.
 * Upon successful init (WIFI_IF_init()), the system enables the NWP for any
 * SL commands.
 * The NWP will be in a low power state (AUTO-CONNECT will be disabled) waiting
 * for connection request (SlNetConn_Start()).
 * User should not call sl_Start/sl_Stop when using this module. Please use
 * WIFI_IF_restart() (for reseting the NWP) or WIFI_IF_deinit() instead.
 */

//*****************************************************************************
//                WIFI IF USER SETTINGS
//*****************************************************************************

/*
 * Defines the minimum severity level allowed.
 * Use E_DEBUG to enable Wifi internal messages
 * Options: E_TRACE, E_DEBUG, E_INFO, E_WARNING, E_ERROR, E_FATAL
 */
#define WIFI_IF_DEBUG_LEVEL E_INFO

/*
 * Defines Provisioning (initial) Parameters:
 * Mode can be:  WifiProvMode_OFF, WifiProvMode_ON, WifiProvMode_ONE_SHOT
 * Command can be one of the following:
 * SL_WLAN_PROVISIONING_CMD_START_MODE_AP,
 * SL_WLAN_PROVISIONING_CMD_START_MODE_SC,
 * SL_WLAN_PROVISIONING_CMD_START_MODE_APSC,
 * SL_WLAN_PROVISIONING_CMD_START_MODE_APSC_EXTERNAL_CONFIGURATION,
 * SL_WLAN_PROVISIONING_CMD_START_MODE_EXTERNAL_CONFIGURATION
 */
#define PROVISIONING_MODE WifiProvMode_ONE_SHOT
#define PROVISIONING_CMD SL_WLAN_PROVISIONING_CMD_START_MODE_APSC

/*
 * Defines Provisioning AP /SC Parameters:
 */
#define PROVISIONING_TIMEOUT 0                 // 0 - use default
#define PROVISIONING_AP_PASSWORD "1234567890"  // NULL - use default (OPEN)
#define PROVISIONING_SC_KEY "1234567890123456" // NULL - use defaults

/* Force provisioning by deleting existing profiles.
 * To be used for testing during development only.
 * Note: When FORCE_PROVSIONING is enabled - the following static profile
 * configurations are ignored
 */
#define FORCE_PROVISIONING (0)

/* Static Profile setting - Method 1: Hard coded
 * Define AP_SSID and optionally AP_PASSWORD - to connect to local network
 * Hard-Coded Definition: update AP_SSID and AP_PASSWORD (NULL means OPEN, else is WPA2)
 */
#define AP_SSID NULL     // "network-name"
#define AP_PASSWORD NULL // "network-password"

/* Static Profile setting  - Method 2: Configuration file
 * File format should be:
 *    "<network-name>' '<network-password>"
 * i.e. ssid and password with one space character between them
 * Do not use newline, extra space symbols or quotation mark
 */
#define AP_CFG_FILENAME "network.cfg" // config file name
#define AP_CFG_TOKEN 12345678         // config file read access token
#define AP_CFG_MAX_SIZE 100           // config file Maximum file length

/* Define (if needed) the external handle for TI Driver's LED for wi-fi status:
 * off: disconnected, blinking: provisionig, on: connected
 * Comment the definition in case the auto control is not required */
#define WIFI_LED_HANDLE gLedBlueHandle