/**
 ******************************************************************************
 * @file    stm32wb5mm_dk_conf_template.h
 * @author  MCD Application Team
 * @brief   configuration file.
 *          This file should be copied to the application folder and renamed
 *          to stm32wb5mm_dk_conf.h
 ******************************************************************************
 * @attention
 *
 * Copyright (c) 2019-2021 STMicroelectronics.
 * All rights reserved.
 *
 * This software is licensed under terms that can be found in the LICENSE file
 * in the root directory of this software component.
 * If no LICENSE file comes with this software, it is provided AS-IS.
 *
 ******************************************************************************
 */

/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32WB5MM_DK_CONF_H
#define STM32WB5MM_DK_CONF_H

#ifdef __cplusplus
extern "C" {
#endif

/* Includes ------------------------------------------------------------------*/
#include "stm32wbxx_hal.h"

/* Environmental Sensors usage */
#define USE_ENV_SENSOR_HTS221_0 0U
#define USE_ENV_SENSOR_LPS22HH_0 0U

/* Motion Sensors usage */
#define USE_MOTION_SENSOR_ISM330DLC_0 0U
#define USE_MOTION_SENSOR_IIS2MDC_0 0U

/* COM  port usage */
#define USE_BSP_COM_FEATURE 0U
#define USE_COM_LOG 0U

#define USE_LCD_CTRL_SSD1315 1U
#define ENV_TEMPERATURE 0U
#define USE_MOTION_SENSOR_ISM330DHCX_0 0U
#define ENV_PRESSURE 0U
#define ENV_HUMIDITY 0U

/* IRQ priorities */
#define BSP_BUTTON_USERx_IT_PRIORITY 0x05UL
#define PWM_LED_CLOCK_IT_PRIORITY 0x03UL

/* I2C3 Frequency in Hz  */
#define BUS_I2C3_FREQUENCY 100000UL /* Frequency of I2C3 = 100 KHz*/

/* Indicates whether or not TCXO is supported by the board
 * 0: TCXO not supported
 * 1: TCXO supported
 */
#define IS_TCXO_SUPPORTED 0U

/* Indicates whether or not DCDC is supported by the board
 * 0: DCDC not supported
 * 1: DCDC supported
 */
#define IS_DCDC_SUPPORTED 1U

#define STM32WB5MM_DK_I2C_Init BSP_I2C3_Init
#define STM32WB5MM_DK_I2C_DeInit BSP_I2C3_DeInit
#define STM32WB5MM_DK_I2C_ReadReg BSP_I2C3_ReadReg
#define STM32WB5MM_DK_I2C_WriteReg BSP_I2C3_WriteReg

#define STM32WB5MM_DK_GetTick BSP_GetTick

/*Number of millisecond of audio at each DMA interrupt*/
#define N_MS_PER_INTERRUPT (20U)

#define AUDIO_IN_CHANNELS 1
#define AUDIO_IN_SAMPLING_FREQUENCY 16000

#define AUDIO_CHANNELS_OUT 1
#define AUDIO_OUT_SAMPLING_FREQUENCY 16000

#define AUDIO_IN_BUFFER_SIZE DEFAULT_AUDIO_IN_BUFFER_SIZE

#if (AUDIO_IN_SAMPLING_FREQUENCY == 8000)
#define MAX_DECIMATION_FACTOR 160
#else
#define MAX_DECIMATION_FACTOR 128
#endif

#define MAX_MIC_FREQ 1280                 /*kHz - Maximum PDM clock */
#define MAX_AUDIO_IN_CHANNEL_NBR_PER_IF 1 /* Maximum number of microphones channels for peripheral interface */
#define MAX_AUDIO_IN_CHANNEL_NBR_TOTAL 1

#ifdef __cplusplus
}
#endif

#endif /* STM32WB5MM_DK_CONF_H */