# Copyright (c) 2021 Project CHIP Authors
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# Auto-generated scripts for harness use only, please review before automation. The endpoints and cluster names are currently set to default

name: 44.1.1. [TC-DGSW-1.1] Global Attributes [DUT_Sever]

PICS:
    - DGSW.S

config:
    nodeId: 0x12344321
    cluster: "Software Diagnostics"
    endpoint: 0

tests:
    - label: "Wait for the commissioned device to be retrieved"
      cluster: "DelayCommands"
      command: "WaitForCommissionee"
      arguments:
          values:
              - name: "nodeId"
                value: nodeId

    - label: "TH reads the ClusterRevision from DUT"
      PICS: DGSW.S.Afffd
      command: "readAttribute"
      attribute: "ClusterRevision"
      response:
          value: 1
          constraints:
              type: int16u

    - label: "TH reads the FeatureMap from DUT"
      PICS: " !DGSW.S.F00 && DGSW.S.Afffc"
      command: "readAttribute"
      attribute: "FeatureMap"
      response:
          value: 0
          constraints:
              type: bitmap32

    - label:
          "Given DGSW.S.F00(Watermarks) ensure featuremap has the correct bit
          set"
      PICS: DGSW.S.F00 && DGSW.S.Afffc
      command: "readAttribute"
      attribute: "FeatureMap"
      response:
          constraints:
              type: bitmap32
              hasMasksSet: [0x1]

    - label: "TH reads AttributeList from DUT"
      PICS: DGSW.S.Afffb
      command: "readAttribute"
      attribute: "AttributeList"
      response:
          constraints:
              type: list
              contains: [65528, 65529, 65530, 65531, 65532, 65533]

    - label: "TH reads optional attribute(ThreadMetrics) in AttributeList"
      PICS: DGSW.S.A0000 && DGSW.S.Afffb
      command: "readAttribute"
      attribute: "AttributeList"
      response:
          constraints:
              type: list
              contains: [0]

    - label: "TH reads optional attribute(CurrentHeapFree) in AttributeList"
      PICS: DGSW.S.A0001 && DGSW.S.Afffb
      command: "readAttribute"
      attribute: "AttributeList"
      response:
          constraints:
              type: list
              contains: [1]

    - label: "TH reads optional attribute(CurrentHeapUsed) in AttributeList"
      PICS: DGSW.S.A0002 && DGSW.S.Afffb
      command: "readAttribute"
      attribute: "AttributeList"
      response:
          constraints:
              type: list
              contains: [2]

    - label:
          "TH reads Feature dependent attribute(CurrentHeapHighWatermark) in
          AttributeList"
      PICS: ( DGSW.S.F00 || DGSW.S.A0003 ) && DGSW.S.Afffb
      command: "readAttribute"
      attribute: "AttributeList"
      response:
          constraints:
              type: list
              contains: [3]

    #List values range check support https://github.com/project-chip/connectedhomeip/issues/26570
    - label:
          "TH reads AttributeList attribute from DUT. 1.The list SHALL NOT
          contain any additional values in the standard or scoped range:
          (0x0000_0000 - 0x0000_4FFF) and (0x0000_F000 - 0x0000_FFFE) 2.The list
          MAY contain values in the Manufacturer Extensible Identifier (MEI)
          range: (0xXXXX_0000 - 0xXXXX_4FFF), where XXXX is the allowed MEI
          range (0x0001 - 0xFFF1), these values SHALL be ignored. 3.The list
          SHALL NOT contain any values in the Test Vendor or invalid range:
          (0x0000_5000 - 0x0000_EFFF and 0x0000_FFFF), (0xXXXX_5000 -
          0xXXXX_FFFF) and (0xFFF1_0000 - 0xFFFF_FFFF), where XXXX is the
          allowed MEI range (0x0001 - 0xFFF1)"
      verification: |
          ./chip-tool softwarediagnostics read attribute-list 1 0

          Verify a list of supported attributes in TH(chip-tool) Log
          Below is the example value which is observed in the RPI platform the value may be differ based on the dut implementation.

          [1676280804.650422][4258:4260] CHIP:TOO: Endpoint: 0 Cluster: 0x0000_0034 Attribute 0x0000_FFFB DataVersion: 2742393629
          [1676280804.650447][4258:4260] CHIP:TOO:   AttributeList: 10 entries
          [1676280804.650456][4258:4260] CHIP:TOO:     [1]: 0
          [1676280804.650464][4258:4260] CHIP:TOO:     [2]: 1
          [1676280804.650471][4258:4260] CHIP:TOO:     [3]: 2
          [1676280804.650478][4258:4260] CHIP:TOO:     [4]: 3
          [1676280804.650485][4258:4260] CHIP:TOO:     [5]: 65528
          [1676280804.650493][4258:4260] CHIP:TOO:     [6]: 65529
          [1676280804.650500][4258:4260] CHIP:TOO:     [7]: 65530
          [1676280804.650507][4258:4260] CHIP:TOO:     [8]: 65531
          [1676280804.650514][4258:4260] CHIP:TOO:     [9]: 65532
          [1676280804.650522][4258:4260] CHIP:TOO:     [10]: 65533
      cluster: "LogCommands"
      command: "UserPrompt"
      PICS: PICS_USER_PROMPT && DGSW.S.Afffb
      arguments:
          values:
              - name: "message"
                value: "Please enter 'y' for success"
              - name: "expectedValue"
                value: "y"

    - label: "TH reads EventList from DUT"
      PICS: DGSW.S.F00 && DGSW.S.Afffa
      command: "readAttribute"
      attribute: "EventList"
      response:
          constraints:
              type: list
              contains: [0]

    - label: "TH reads EventList from DUT"
      PICS: " !DGSW.S.F00 && DGSW.S.Afffa "
      command: "readAttribute"
      attribute: "EventList"
      response:
          value: []
          constraints:
              type: list

    - label:
          "TH reads EventList attribute from DUT. 1.The list MAY contain values
          in the Manufacturer Extensible Identifier (MEI) range: (0xXXXX_0000 -
          0xXXXX_00FF), where XXXX is the allowed MEI range (0x0001 - 0xFFF1),
          these values SHALL be ignored. 2.The list SHALL NOT contain any values
          in the Test Vendor or invalid range: (0x0000_0100 - 0x0000_FFFF),
          (0xXXXX_0100 - 0xXXXX_FFFF) and (0xFFF1_0000 - 0xFFFF_FFFF), where
          XXXX is the allowed MEI range (0x0001 - 0xFFF1)"
      verification: |
          ./chip-tool  softwarediagnostics read event-list 1 0


          [1676459464.108583][25294:25296] CHIP:TOO: Endpoint: 0 Cluster: 0x0000_0034 Attribute 0x0000_FFFA DataVersion: 650337896
          [1676459464.108607][25294:25296] CHIP:TOO:   EventList: 1 entries
          [1676459464.108612][25294:25296] CHIP:TOO:     [1]: 0
          [1676459464.108635][25294:25296] CHIP:EM: <<< [E:23624i S:46243 M:182610763 (Ack:167177651)] (S) Msg TX to 1:0000000000000001 [110F] --- Type 0000:10 (SecureChannel:StandaloneAck)
          [1676459464.108640][25294:25296] CHIP:IN: (S) Sending msg 182610763 on secure session with LSID: 46243
      cluster: "LogCommands"
      command: "UserPrompt"
      PICS: PICS_USER_PROMPT && DGSW.S.Afffa
      arguments:
          values:
              - name: "message"
                value: "Please enter 'y' for success"
              - name: "expectedValue"
                value: "y"

    - label: "TH reads AcceptedCommandList from DUT"
      PICS: DGSW.S.F00 && DGSW.S.Afff9
      command: "readAttribute"
      attribute: "AcceptedCommandList"
      response:
          constraints:
              type: list
              contains: [0]

    - label: "TH reads AcceptedCommandList from DUT"
      PICS: " !DGSW.S.F00 && DGSW.S.Afff9"
      command: "readAttribute"
      attribute: "AcceptedCommandList"
      response:
          value: []
          constraints:
              type: list

    - label:
          "TH reads AcceptedCommandList attribute from DUT. 1.The list SHALL NOT
          contain any additional values in the standard or scoped range:
          (0x0000_0000 - 0x0000_00FF). 2.The list MAY contain values in the
          Manufacturer Extensible Identifier (MEI) range: (0xXXXX_0000 -
          0xXXXX_00FF), where XXXX is the allowed MEI range (0x0001 - 0xFFF1),
          these values SHALL be ignored.3.The list SHALL NOT contain any values
          in the Test Vendor or invalid range: (0x0000_0100 - 0x0000_FFFF),
          (0xXXXX_0100 - 0xXXXX_FFFF) and (0xFFF1_0000 - 0xFFFF_FFFF), where
          XXXX is the allowed MEI range (0x0001 - 0xFFF1)"
      verification: |
          ./chip-tool softwarediagnostics read accepted-command-list 1 0

          Verify a list of Accepted Command that DUT implemented in TH(chip-tool) Log, This list SHALL have one entry and its value of 0 if WTRMRK feature is supported by DUT.

          [1651787861.534707][241117:241122] CHIP:TOO: Endpoint: 0 Cluster: 0x0000_0034 Attribute 0x0000_FFF9 DataVersion: 1343666373
          [1651787861.534769][241117:241122] CHIP:TOO:   AcceptedCommandList: 1 entries
          [1651787861.534793][241117:241122] CHIP:TOO:     [1]: 0
      cluster: "LogCommands"
      command: "UserPrompt"
      PICS: PICS_USER_PROMPT && DGSW.S.Afff9
      arguments:
          values:
              - name: "message"
                value: "Please enter 'y' for success"
              - name: "expectedValue"
                value: "y"

    - label:
          "TH reads GeneratedCommandList attribute from DUT. 1.The list MAY
          contain values in the Manufacturer Extensible Identifier (MEI) range:
          (0xXXXX_0000 - 0xXXXX_00FF), where XXXX is the allowed MEI range
          (0x0001 - 0xFFF1), these values SHALL be ignored. 2.The list SHALL NOT
          contain any values in the Test Vendor or invalid range: (0x0000_0100 -
          0x0000_FFFF), (0xXXXX_0100 - 0xXXXX_FFFF) and (0xFFF1_0000 -
          0xFFFF_FFFF), where XXXX is the allowed MEI range (0x0001 - 0xFFF1)"
      verification: |
          ./chip-tool softwarediagnostics read generated-command-list 1 0

          Verify a list of Generated Command, this list SHALL be empty in TH(chip-tool) Log

          [1651787918.020673][241128:241133] CHIP:TOO: Endpoint: 0 Cluster: 0x0000_0034 Attribute 0x0000_FFF8 DataVersion: 1343666373
          [1651787918.020734][241128:241133] CHIP:TOO:   GeneratedCommandList: 0 entries
      cluster: "LogCommands"
      command: "UserPrompt"
      PICS: PICS_USER_PROMPT && DGSW.S.Afff8
      arguments:
          values:
              - name: "message"
                value: "Please enter 'y' for success"
              - name: "expectedValue"
                value: "y"