/*
 *    Copyright (c) 2020 Project CHIP Authors
 *    Copyright (c) 2019 Google LLC.
 *    All rights reserved.
 *
 *    Licensed under the Apache License, Version 2.0 (the "License");
 *    you may not use this file except in compliance with the License.
 *    You may obtain a copy of the License at
 *
 *        http://www.apache.org/licenses/LICENSE-2.0
 *
 *    Unless required by applicable law or agreed to in writing, software
 *    distributed under the License is distributed on an "AS IS" BASIS,
 *    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 *    See the License for the specific language governing permissions and
 *    limitations under the License.
 */

/**
 *    @file
 *          Example project configuration file for CHIP.
 *
 *          This is a place to put application or project-specific overrides
 *          to the default configuration values for general CHIP features.
 *
 */

#ifndef CHIP_PROJECT_CONFIG_H
#define CHIP_PROJECT_CONFIG_H

// Security and Authentication always enabled
#define CHIP_CONFIG_SECURITY_TEST_MODE 0

#if BUILD_RELEASE // release build
// Note: Default Pairing/PIN/Serial Numbers being used. These should not be enabled for production builds
#endif // BUILD_RELEASE

// Use a default pairing code if one hasn't been provisioned in flash.
#define CHIP_DEVICE_CONFIG_USE_TEST_SETUP_PIN_CODE 20202021
#define CHIP_DEVICE_CONFIG_USE_TEST_SETUP_DISCRIMINATOR 0xF00

// Use a default pairing code if one hasn't been provisioned in flash.
#define CHIP_DEVICE_CONFIG_USE_TEST_PAIRING_CODE "CHIPUS"

/**
 * CHIP_DEVICE_CONFIG_DEVICE_HARDWARE_VERSION
 *
 * The hardware version number assigned to device or product by the device vendor.  This
 * number is scoped to the device product id, and typically corresponds to a revision of the
 * physical device, a change to its packaging, and/or a change to its marketing presentation.
 * This value is generally *not* incremented for device software versions.
 */
#define CHIP_DEVICE_CONFIG_DEVICE_HARDWARE_VERSION 1

/**
 * Values set by args.gni:
 * CHIP_DEVICE_CONFIG_DEVICE_VENDOR_ID
 * CHIP_DEVICE_CONFIG_DEVICE_PRODUCT_ID
 * CHIP_DEVICE_CONFIG_DEVICE_SOFTWARE_VERSION_STRING
 * CHIP_DEVICE_CONFIG_DEVICE_SOFTWARE_VERSION
 */

/**
 * CHIP_DEVICE_CONFIG_ENABLE_CHIPOBLE
 *
 * Enable support for CHIP-over-BLE (CHIPOBLE).
 */
#define CHIP_DEVICE_CONFIG_ENABLE_CHIPOBLE 1

/**
 * CHIP_DEVICE_CONFIG_EVENT_LOGGING_DEBUG_BUFFER_SIZE
 *
 * A size, in bytes, of the individual debug event logging buffer.
 */
#define CHIP_DEVICE_CONFIG_EVENT_LOGGING_DEBUG_BUFFER_SIZE (512)

#define MATTER_CC13X2_26X2_PLATFORM_LOG_ENABLED 1

/**
 * CHIP_DEVICE_CONFIG_ENABLE_THREAD_SRP_CLIENT
 *
 * Enable the OpenThread SRP client to allow for CHIP device discovery.
 */
#define CHIP_DEVICE_CONFIG_ENABLE_THREAD_SRP_CLIENT 1

/**
 * CHIP_CONFIG_EVENT_LOGGING_DEFAULT_IMPORTANCE
 *
 * For a development build, set the default importance of events to be logged as Debug.
 * Since debug is the lowest importance level, this means all standard, critical, info and
 * debug importance level vi events get logged.
 */
#if BUILD_RELEASE
#define CHIP_CONFIG_EVENT_LOGGING_DEFAULT_IMPORTANCE chip::Profiles::DataManagement::Production
#else
#define CHIP_CONFIG_EVENT_LOGGING_DEFAULT_IMPORTANCE chip::Profiles::DataManagement::Debug
#endif // BUILD_RELEASE

#define CHIP_DEVICE_CONFIG_ENABLE_EXTENDED_DISCOVERY 1

/**
 * @def CHIP_IM_MAX_NUM_COMMAND_HANDLER
 *
 * @brief Defines the maximum number of CommandHandler, limits the number of active commands transactions on server.
 *
 * TODO: (#17080) 1 should be OK since almost all commands are synchronous, should be some larger number after we resolved the issue
 * of the large memory footprint of ReadHandler.
 */
#define CHIP_IM_MAX_NUM_COMMAND_HANDLER 1

/**
 * @def CHIP_IM_MAX_NUM_WRITE_HANDLER
 *
 * @brief Defines the maximum number of WriteHandler, limits the number of active write transactions on server.
 *
 * TODO: (#17080) 1 should be OK since most write requests can be synchronous (not chunked), should be some larger number after we
 * resolved the issue of the large memory footprint of ReadHandler.
 */
#define CHIP_IM_MAX_NUM_WRITE_HANDLER 1

#endif // CHIP_PROJECT_CONFIG_H