/*
 *
 *    Copyright (c) 2022 Project CHIP Authors
 *
 *    Licensed under the Apache License, Version 2.0 (the "License");
 *    you may not use this file except in compliance with the License.
 *    You may obtain a copy of the License at
 *
 *        http://www.apache.org/licenses/LICENSE-2.0
 *
 *    Unless required by applicable law or agreed to in writing, software
 *    distributed under the License is distributed on an "AS IS" BASIS,
 *    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 *    See the License for the specific language governing permissions and
 *    limitations under the License.
 */

// THIS FILE IS GENERATED BY ZAP

#pragma once

#include <stdint.h>

#include <app-common/zap-generated/enums.h>

namespace chip {
namespace app {
namespace Clusters {

namespace Identify {

// Need to convert consumers to using the new enum classes, so we
// don't just have casts all over.
#ifdef CHIP_USE_ENUM_CLASS_FOR_IM_ENUM
// Enum for IdentifyEffectIdentifier
enum class IdentifyEffectIdentifier : uint8_t
{
    kBlink         = 0x00,
    kBreathe       = 0x01,
    kOkay          = 0x02,
    kChannelChange = 0x0B,
    kFinishEffect  = 0xFE,
    kStopEffect    = 0xFF,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 3,
};
#else  // CHIP_USE_ENUM_CLASS_FOR_IM_ENUM
using IdentifyEffectIdentifier = EmberAfIdentifyEffectIdentifier;
static IdentifyEffectIdentifier __attribute__((unused)) kIdentifyEffectIdentifierkUnknownEnumValue =
    static_cast<IdentifyEffectIdentifier>(3);
#endif // CHIP_USE_ENUM_CLASS_FOR_IM_ENUM

// Need to convert consumers to using the new enum classes, so we
// don't just have casts all over.
#ifdef CHIP_USE_ENUM_CLASS_FOR_IM_ENUM
// Enum for IdentifyEffectVariant
enum class IdentifyEffectVariant : uint8_t
{
    kDefault = 0x00,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 1,
};
#else  // CHIP_USE_ENUM_CLASS_FOR_IM_ENUM
using IdentifyEffectVariant = EmberAfIdentifyEffectVariant;
static IdentifyEffectVariant __attribute__((unused)) kIdentifyEffectVariantkUnknownEnumValue =
    static_cast<IdentifyEffectVariant>(1);
#endif // CHIP_USE_ENUM_CLASS_FOR_IM_ENUM

// Need to convert consumers to using the new enum classes, so we
// don't just have casts all over.
#ifdef CHIP_USE_ENUM_CLASS_FOR_IM_ENUM
// Enum for IdentifyIdentifyType
enum class IdentifyIdentifyType : uint8_t
{
    kNone         = 0x00,
    kVisibleLight = 0x01,
    kVisibleLED   = 0x02,
    kAudibleBeep  = 0x03,
    kDisplay      = 0x04,
    kActuator     = 0x05,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 6,
};
#else  // CHIP_USE_ENUM_CLASS_FOR_IM_ENUM
using IdentifyIdentifyType                                                                 = EmberAfIdentifyIdentifyType;
static IdentifyIdentifyType __attribute__((unused)) kIdentifyIdentifyTypekUnknownEnumValue = static_cast<IdentifyIdentifyType>(6);
#endif // CHIP_USE_ENUM_CLASS_FOR_IM_ENUM
} // namespace Identify

namespace Groups {

// Bitmap for GroupClusterFeature
enum class GroupClusterFeature : uint32_t
{
    kGroupNames = 0x1,
};
} // namespace Groups

namespace Scenes {

// Bitmap for SceneFeatures
enum class SceneFeatures : uint32_t
{
    kSceneNames = 0x1,
};

// Bitmap for ScenesCopyMode
enum class ScenesCopyMode : uint8_t
{
    kCopyAllScenes = 0x1,
};
} // namespace Scenes

namespace OnOff {

// Need to convert consumers to using the new enum classes, so we
// don't just have casts all over.
#ifdef CHIP_USE_ENUM_CLASS_FOR_IM_ENUM
// Enum for OnOffDelayedAllOffEffectVariant
enum class OnOffDelayedAllOffEffectVariant : uint8_t
{
    kFadeToOffIn0p8Seconds                                = 0x00,
    kNoFade                                               = 0x01,
    k50PercentDimDownIn0p8SecondsThenFadeToOffIn12Seconds = 0x02,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 3,
};
#else  // CHIP_USE_ENUM_CLASS_FOR_IM_ENUM
using OnOffDelayedAllOffEffectVariant                                                      = EmberAfOnOffDelayedAllOffEffectVariant;
static OnOffDelayedAllOffEffectVariant __attribute__((unused)) kOnOffDelayedAllOffEffectVariantkUnknownEnumValue =
    static_cast<OnOffDelayedAllOffEffectVariant>(3);
#endif // CHIP_USE_ENUM_CLASS_FOR_IM_ENUM

// Need to convert consumers to using the new enum classes, so we
// don't just have casts all over.
#ifdef CHIP_USE_ENUM_CLASS_FOR_IM_ENUM
// Enum for OnOffDyingLightEffectVariant
enum class OnOffDyingLightEffectVariant : uint8_t
{
    k20PercenterDimUpIn0p5SecondsThenFadeToOffIn1Second = 0x00,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 1,
};
#else  // CHIP_USE_ENUM_CLASS_FOR_IM_ENUM
using OnOffDyingLightEffectVariant = EmberAfOnOffDyingLightEffectVariant;
static OnOffDyingLightEffectVariant __attribute__((unused)) kOnOffDyingLightEffectVariantkUnknownEnumValue =
    static_cast<OnOffDyingLightEffectVariant>(1);
#endif // CHIP_USE_ENUM_CLASS_FOR_IM_ENUM

// Need to convert consumers to using the new enum classes, so we
// don't just have casts all over.
#ifdef CHIP_USE_ENUM_CLASS_FOR_IM_ENUM
// Enum for OnOffEffectIdentifier
enum class OnOffEffectIdentifier : uint8_t
{
    kDelayedAllOff = 0x00,
    kDyingLight    = 0x01,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 2,
};
#else  // CHIP_USE_ENUM_CLASS_FOR_IM_ENUM
using OnOffEffectIdentifier = EmberAfOnOffEffectIdentifier;
static OnOffEffectIdentifier __attribute__((unused)) kOnOffEffectIdentifierkUnknownEnumValue =
    static_cast<OnOffEffectIdentifier>(2);
#endif // CHIP_USE_ENUM_CLASS_FOR_IM_ENUM

// Enum for OnOffStartUpOnOff
enum class OnOffStartUpOnOff : uint8_t
{
    kOff                 = 0x00,
    kOn                  = 0x01,
    kTogglePreviousOnOff = 0x02,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 3,
};

// Bitmap for OnOffControl
enum class OnOffControl : uint8_t
{
    kAcceptOnlyWhenOn = 0x1,
};

// Bitmap for OnOffFeature
enum class OnOffFeature : uint32_t
{
    kLighting = 0x1,
};
} // namespace OnOff

namespace OnOffSwitchConfiguration {} // namespace OnOffSwitchConfiguration

namespace LevelControl {

// Need to convert consumers to using the new enum classes, so we
// don't just have casts all over.
#ifdef CHIP_USE_ENUM_CLASS_FOR_IM_ENUM
// Enum for MoveMode
enum class MoveMode : uint8_t
{
    kUp   = 0x00,
    kDown = 0x01,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 2,
};
#else  // CHIP_USE_ENUM_CLASS_FOR_IM_ENUM
using MoveMode                                                                         = EmberAfMoveMode;
static MoveMode __attribute__((unused)) kMoveModekUnknownEnumValue                     = static_cast<MoveMode>(2);
#endif // CHIP_USE_ENUM_CLASS_FOR_IM_ENUM

// Need to convert consumers to using the new enum classes, so we
// don't just have casts all over.
#ifdef CHIP_USE_ENUM_CLASS_FOR_IM_ENUM
// Enum for StepMode
enum class StepMode : uint8_t
{
    kUp   = 0x00,
    kDown = 0x01,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 2,
};
#else  // CHIP_USE_ENUM_CLASS_FOR_IM_ENUM
using StepMode                                                                         = EmberAfStepMode;
static StepMode __attribute__((unused)) kStepModekUnknownEnumValue                     = static_cast<StepMode>(2);
#endif // CHIP_USE_ENUM_CLASS_FOR_IM_ENUM

// Bitmap for LevelControlFeature
enum class LevelControlFeature : uint32_t
{
    kOnOff     = 0x1,
    kLighting  = 0x2,
    kFrequency = 0x4,
};

// Bitmap for LevelControlOptions
enum class LevelControlOptions : uint8_t
{
    kExecuteIfOff           = 0x1,
    kCoupleColorTempToLevel = 0x2,
};
} // namespace LevelControl

namespace BinaryInputBasic {} // namespace BinaryInputBasic

namespace PulseWidthModulation {} // namespace PulseWidthModulation

namespace Descriptor {} // namespace Descriptor

namespace Binding {} // namespace Binding

namespace AccessControl {

// Enum for AccessControlEntryAuthModeEnum
enum class AccessControlEntryAuthModeEnum : uint8_t
{
    kPase  = 0x01,
    kCase  = 0x02,
    kGroup = 0x03,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 0,
};

// Enum for AccessControlEntryPrivilegeEnum
enum class AccessControlEntryPrivilegeEnum : uint8_t
{
    kView       = 0x01,
    kProxyView  = 0x02,
    kOperate    = 0x03,
    kManage     = 0x04,
    kAdminister = 0x05,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 0,
};

// Enum for ChangeTypeEnum
enum class ChangeTypeEnum : uint8_t
{
    kChanged = 0x00,
    kAdded   = 0x01,
    kRemoved = 0x02,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 3,
};
} // namespace AccessControl

namespace Actions {

// Enum for ActionErrorEnum
enum class ActionErrorEnum : uint8_t
{
    kUnknown     = 0x00,
    kInterrupted = 0x01,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 2,
};

// Enum for ActionStateEnum
enum class ActionStateEnum : uint8_t
{
    kInactive = 0x00,
    kActive   = 0x01,
    kPaused   = 0x02,
    kDisabled = 0x03,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 4,
};

// Enum for ActionTypeEnum
enum class ActionTypeEnum : uint8_t
{
    kOther        = 0x00,
    kScene        = 0x01,
    kSequence     = 0x02,
    kAutomation   = 0x03,
    kException    = 0x04,
    kNotification = 0x05,
    kAlarm        = 0x06,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 7,
};

// Enum for EndpointListTypeEnum
enum class EndpointListTypeEnum : uint8_t
{
    kOther = 0x00,
    kRoom  = 0x01,
    kZone  = 0x02,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 3,
};

// Bitmap for CommandBits
enum class CommandBits : uint16_t
{
    kInstantAction               = 0x1,
    kInstantActionWithTransition = 0x2,
    kStartAction                 = 0x4,
    kStartActionWithDuration     = 0x8,
    kStopAction                  = 0x10,
    kPauseAction                 = 0x20,
    kPauseActionWithDuration     = 0x40,
    kResumeAction                = 0x80,
    kEnableAction                = 0x100,
    kEnableActionWithDuration    = 0x200,
    kDisableAction               = 0x400,
    kDisableActionWithDuration   = 0x800,
};
} // namespace Actions

namespace BasicInformation {} // namespace BasicInformation

namespace OtaSoftwareUpdateProvider {

// Enum for OTAApplyUpdateAction
enum class OTAApplyUpdateAction : uint8_t
{
    kProceed         = 0x00,
    kAwaitNextAction = 0x01,
    kDiscontinue     = 0x02,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 3,
};

// Enum for OTADownloadProtocol
enum class OTADownloadProtocol : uint8_t
{
    kBDXSynchronous  = 0x00,
    kBDXAsynchronous = 0x01,
    kHttps           = 0x02,
    kVendorSpecific  = 0x03,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 4,
};

// Enum for OTAQueryStatus
enum class OTAQueryStatus : uint8_t
{
    kUpdateAvailable              = 0x00,
    kBusy                         = 0x01,
    kNotAvailable                 = 0x02,
    kDownloadProtocolNotSupported = 0x03,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 4,
};
} // namespace OtaSoftwareUpdateProvider

namespace OtaSoftwareUpdateRequestor {

// Enum for OTAAnnouncementReason
enum class OTAAnnouncementReason : uint8_t
{
    kSimpleAnnouncement    = 0x00,
    kUpdateAvailable       = 0x01,
    kUrgentUpdateAvailable = 0x02,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 3,
};

// Enum for OTAChangeReasonEnum
enum class OTAChangeReasonEnum : uint8_t
{
    kUnknown         = 0x00,
    kSuccess         = 0x01,
    kFailure         = 0x02,
    kTimeOut         = 0x03,
    kDelayByProvider = 0x04,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 5,
};

// Enum for OTAUpdateStateEnum
enum class OTAUpdateStateEnum : uint8_t
{
    kUnknown              = 0x00,
    kIdle                 = 0x01,
    kQuerying             = 0x02,
    kDelayedOnQuery       = 0x03,
    kDownloading          = 0x04,
    kApplying             = 0x05,
    kDelayedOnApply       = 0x06,
    kRollingBack          = 0x07,
    kDelayedOnUserConsent = 0x08,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 9,
};
} // namespace OtaSoftwareUpdateRequestor

namespace LocalizationConfiguration {} // namespace LocalizationConfiguration

namespace TimeFormatLocalization {

// Enum for CalendarType
enum class CalendarType : uint8_t
{
    kBuddhist  = 0x00,
    kChinese   = 0x01,
    kCoptic    = 0x02,
    kEthiopian = 0x03,
    kGregorian = 0x04,
    kHebrew    = 0x05,
    kIndian    = 0x06,
    kIslamic   = 0x07,
    kJapanese  = 0x08,
    kKorean    = 0x09,
    kPersian   = 0x0A,
    kTaiwanese = 0x0B,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 12,
};

// Enum for HourFormat
enum class HourFormat : uint8_t
{
    k12hr = 0x00,
    k24hr = 0x01,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 2,
};
} // namespace TimeFormatLocalization

namespace UnitLocalization {

// Enum for TempUnit
enum class TempUnit : uint8_t
{
    kFahrenheit = 0x00,
    kCelsius    = 0x01,
    kKelvin     = 0x02,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 3,
};

// Bitmap for UnitLocalizationFeature
enum class UnitLocalizationFeature : uint32_t
{
    kTemperatureUnit = 0x1,
};
} // namespace UnitLocalization

namespace PowerSourceConfiguration {} // namespace PowerSourceConfiguration

namespace PowerSource {

// Enum for BatChargeFault
enum class BatChargeFault : uint8_t
{
    kUnspecfied          = 0x00,
    kAmbientTooHot       = 0x01,
    kAmbientTooCold      = 0x02,
    kBatteryTooHot       = 0x03,
    kBatteryTooCold      = 0x04,
    kBatteryAbsent       = 0x05,
    kBatteryOverVoltage  = 0x06,
    kBatteryUnderVoltage = 0x07,
    kChargerOverVoltage  = 0x08,
    kChargerUnderVoltage = 0x09,
    kSafetyTimeout       = 0x0A,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 11,
};

// Enum for BatChargeLevel
enum class BatChargeLevel : uint8_t
{
    kOk       = 0x00,
    kWarning  = 0x01,
    kCritical = 0x02,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 3,
};

// Enum for BatChargeState
enum class BatChargeState : uint8_t
{
    kUnknown        = 0x00,
    kIsCharging     = 0x01,
    kIsAtFullCharge = 0x02,
    kIsNotCharging  = 0x03,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 4,
};

// Enum for BatFault
enum class BatFault : uint8_t
{
    kUnspecfied = 0x00,
    kOverTemp   = 0x01,
    kUnderTemp  = 0x02,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 3,
};

// Enum for BatReplaceability
enum class BatReplaceability : uint8_t
{
    kUnspecified        = 0x00,
    kNotReplaceable     = 0x01,
    kUserReplaceable    = 0x02,
    kFactoryReplaceable = 0x03,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 4,
};

// Enum for PowerSourceStatus
enum class PowerSourceStatus : uint8_t
{
    kUnspecfied  = 0x00,
    kActive      = 0x01,
    kStandby     = 0x02,
    kUnavailable = 0x03,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 4,
};

// Enum for WiredCurrentType
enum class WiredCurrentType : uint8_t
{
    kAc = 0x00,
    kDc = 0x01,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 2,
};

// Enum for WiredFault
enum class WiredFault : uint8_t
{
    kUnspecfied   = 0x00,
    kOverVoltage  = 0x01,
    kUnderVoltage = 0x02,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 3,
};

// Bitmap for PowerSourceFeature
enum class PowerSourceFeature : uint32_t
{
    kWired        = 0x1,
    kBattery      = 0x2,
    kRechargeable = 0x4,
    kReplaceable  = 0x8,
};
} // namespace PowerSource

namespace GeneralCommissioning {

// Enum for CommissioningError
enum class CommissioningError : uint8_t
{
    kOk                    = 0x00,
    kValueOutsideRange     = 0x01,
    kInvalidAuthentication = 0x02,
    kNoFailSafe            = 0x03,
    kBusyWithOtherAdmin    = 0x04,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 5,
};

// Enum for RegulatoryLocationType
enum class RegulatoryLocationType : uint8_t
{
    kIndoor        = 0x00,
    kOutdoor       = 0x01,
    kIndoorOutdoor = 0x02,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 3,
};
} // namespace GeneralCommissioning

namespace NetworkCommissioning {

// Enum for NetworkCommissioningStatus
enum class NetworkCommissioningStatus : uint8_t
{
    kSuccess                = 0x00,
    kOutOfRange             = 0x01,
    kBoundsExceeded         = 0x02,
    kNetworkIDNotFound      = 0x03,
    kDuplicateNetworkID     = 0x04,
    kNetworkNotFound        = 0x05,
    kRegulatoryError        = 0x06,
    kAuthFailure            = 0x07,
    kUnsupportedSecurity    = 0x08,
    kOtherConnectionFailure = 0x09,
    kIPV6Failed             = 0x0A,
    kIPBindFailed           = 0x0B,
    kUnknownError           = 0x0C,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 13,
};

// Enum for WiFiBand
enum class WiFiBand : uint8_t
{
    k2g4  = 0x00,
    k3g65 = 0x01,
    k5g   = 0x02,
    k6g   = 0x03,
    k60g  = 0x04,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 5,
};

// Bitmap for NetworkCommissioningFeature
enum class NetworkCommissioningFeature : uint32_t
{
    kWiFiNetworkInterface     = 0x1,
    kThreadNetworkInterface   = 0x2,
    kEthernetNetworkInterface = 0x4,
};

// Bitmap for WiFiSecurity
enum class WiFiSecurity : uint8_t
{
    kUnencrypted  = 0x1,
    kWep          = 0x2,
    kWpaPersonal  = 0x4,
    kWpa2Personal = 0x8,
    kWpa3Personal = 0x10,
};
} // namespace NetworkCommissioning

namespace DiagnosticLogs {

// Enum for LogsIntent
enum class LogsIntent : uint8_t
{
    kEndUserSupport = 0x00,
    kNetworkDiag    = 0x01,
    kCrashLogs      = 0x02,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 3,
};

// Enum for LogsStatus
enum class LogsStatus : uint8_t
{
    kSuccess   = 0x00,
    kExhausted = 0x01,
    kNoLogs    = 0x02,
    kBusy      = 0x03,
    kDenied    = 0x04,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 5,
};

// Enum for LogsTransferProtocol
enum class LogsTransferProtocol : uint8_t
{
    kResponsePayload = 0x00,
    kBdx             = 0x01,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 2,
};
} // namespace DiagnosticLogs

namespace GeneralDiagnostics {

// Enum for BootReasonEnum
enum class BootReasonEnum : uint8_t
{
    kUnspecified             = 0x00,
    kPowerOnReboot           = 0x01,
    kBrownOutReset           = 0x02,
    kSoftwareWatchdogReset   = 0x03,
    kHardwareWatchdogReset   = 0x04,
    kSoftwareUpdateCompleted = 0x05,
    kSoftwareReset           = 0x06,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 7,
};

// Need to convert consumers to using the new enum classes, so we
// don't just have casts all over.
#ifdef CHIP_USE_ENUM_CLASS_FOR_IM_ENUM
// Enum for HardwareFaultEnum
enum class HardwareFaultEnum : uint8_t
{
    kUnspecified            = 0x00,
    kRadio                  = 0x01,
    kSensor                 = 0x02,
    kResettableOverTemp     = 0x03,
    kNonResettableOverTemp  = 0x04,
    kPowerSource            = 0x05,
    kVisualDisplayFault     = 0x06,
    kAudioOutputFault       = 0x07,
    kUserInterfaceFault     = 0x08,
    kNonVolatileMemoryError = 0x09,
    kTamperDetected         = 0x0A,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 11,
};
#else  // CHIP_USE_ENUM_CLASS_FOR_IM_ENUM
using HardwareFaultEnum                                                                = EmberAfHardwareFaultEnum;
static HardwareFaultEnum __attribute__((unused)) kHardwareFaultEnumkUnknownEnumValue   = static_cast<HardwareFaultEnum>(11);
#endif // CHIP_USE_ENUM_CLASS_FOR_IM_ENUM

// Need to convert consumers to using the new enum classes, so we
// don't just have casts all over.
#ifdef CHIP_USE_ENUM_CLASS_FOR_IM_ENUM
// Enum for InterfaceTypeEnum
enum class InterfaceTypeEnum : uint8_t
{
    kUnspecified = 0x00,
    kWiFi        = 0x01,
    kEthernet    = 0x02,
    kCellular    = 0x03,
    kThread      = 0x04,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 5,
};
#else  // CHIP_USE_ENUM_CLASS_FOR_IM_ENUM
using InterfaceTypeEnum                                                                = EmberAfInterfaceTypeEnum;
static InterfaceTypeEnum __attribute__((unused)) kInterfaceTypeEnumkUnknownEnumValue   = static_cast<InterfaceTypeEnum>(5);
#endif // CHIP_USE_ENUM_CLASS_FOR_IM_ENUM

// Need to convert consumers to using the new enum classes, so we
// don't just have casts all over.
#ifdef CHIP_USE_ENUM_CLASS_FOR_IM_ENUM
// Enum for NetworkFaultEnum
enum class NetworkFaultEnum : uint8_t
{
    kUnspecified      = 0x00,
    kHardwareFailure  = 0x01,
    kNetworkJammed    = 0x02,
    kConnectionFailed = 0x03,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 4,
};
#else  // CHIP_USE_ENUM_CLASS_FOR_IM_ENUM
using NetworkFaultEnum                                                                 = EmberAfNetworkFaultEnum;
static NetworkFaultEnum __attribute__((unused)) kNetworkFaultEnumkUnknownEnumValue     = static_cast<NetworkFaultEnum>(4);
#endif // CHIP_USE_ENUM_CLASS_FOR_IM_ENUM

// Need to convert consumers to using the new enum classes, so we
// don't just have casts all over.
#ifdef CHIP_USE_ENUM_CLASS_FOR_IM_ENUM
// Enum for RadioFaultEnum
enum class RadioFaultEnum : uint8_t
{
    kUnspecified   = 0x00,
    kWiFiFault     = 0x01,
    kCellularFault = 0x02,
    kThreadFault   = 0x03,
    kNFCFault      = 0x04,
    kBLEFault      = 0x05,
    kEthernetFault = 0x06,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 7,
};
#else  // CHIP_USE_ENUM_CLASS_FOR_IM_ENUM
using RadioFaultEnum                                                                   = EmberAfRadioFaultEnum;
static RadioFaultEnum __attribute__((unused)) kRadioFaultEnumkUnknownEnumValue         = static_cast<RadioFaultEnum>(7);
#endif // CHIP_USE_ENUM_CLASS_FOR_IM_ENUM
} // namespace GeneralDiagnostics

namespace SoftwareDiagnostics {

// Bitmap for SoftwareDiagnosticsFeature
enum class SoftwareDiagnosticsFeature : uint32_t
{
    kWaterMarks = 0x1,
};
} // namespace SoftwareDiagnostics

namespace ThreadNetworkDiagnostics {

// Enum for ConnectionStatusEnum
enum class ConnectionStatusEnum : uint8_t
{
    kConnected    = 0x00,
    kNotConnected = 0x01,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 2,
};

// Enum for NetworkFault
enum class NetworkFault : uint8_t
{
    kUnspecified     = 0x00,
    kLinkDown        = 0x01,
    kHardwareFailure = 0x02,
    kNetworkJammed   = 0x03,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 4,
};

// Need to convert consumers to using the new enum classes, so we
// don't just have casts all over.
#ifdef CHIP_USE_ENUM_CLASS_FOR_IM_ENUM
// Enum for RoutingRole
enum class RoutingRole : uint8_t
{
    kUnspecified     = 0x00,
    kUnassigned      = 0x01,
    kSleepyEndDevice = 0x02,
    kEndDevice       = 0x03,
    kReed            = 0x04,
    kRouter          = 0x05,
    kLeader          = 0x06,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 7,
};
#else  // CHIP_USE_ENUM_CLASS_FOR_IM_ENUM
using RoutingRole                                                                      = EmberAfRoutingRole;
static RoutingRole __attribute__((unused)) kRoutingRolekUnknownEnumValue               = static_cast<RoutingRole>(7);
#endif // CHIP_USE_ENUM_CLASS_FOR_IM_ENUM

// Bitmap for ThreadNetworkDiagnosticsFeature
enum class ThreadNetworkDiagnosticsFeature : uint32_t
{
    kPacketCounts = 0x1,
    kErrorCounts  = 0x2,
    kMLECounts    = 0x4,
    kMACCounts    = 0x8,
};
} // namespace ThreadNetworkDiagnostics

namespace WiFiNetworkDiagnostics {

// Enum for AssociationFailureCause
enum class AssociationFailureCause : uint8_t
{
    kUnknown              = 0x00,
    kAssociationFailed    = 0x01,
    kAuthenticationFailed = 0x02,
    kSsidNotFound         = 0x03,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 4,
};

// Need to convert consumers to using the new enum classes, so we
// don't just have casts all over.
#ifdef CHIP_USE_ENUM_CLASS_FOR_IM_ENUM
// Enum for SecurityType
enum class SecurityType : uint8_t
{
    kUnspecified = 0x00,
    kNone        = 0x01,
    kWep         = 0x02,
    kWpa         = 0x03,
    kWpa2        = 0x04,
    kWpa3        = 0x05,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 6,
};
#else  // CHIP_USE_ENUM_CLASS_FOR_IM_ENUM
using SecurityType                                                                     = EmberAfSecurityType;
static SecurityType __attribute__((unused)) kSecurityTypekUnknownEnumValue             = static_cast<SecurityType>(6);
#endif // CHIP_USE_ENUM_CLASS_FOR_IM_ENUM

// Enum for WiFiConnectionStatus
enum class WiFiConnectionStatus : uint8_t
{
    kConnected    = 0x00,
    kNotConnected = 0x01,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 2,
};

// Need to convert consumers to using the new enum classes, so we
// don't just have casts all over.
#ifdef CHIP_USE_ENUM_CLASS_FOR_IM_ENUM
// Enum for WiFiVersionType
enum class WiFiVersionType : uint8_t
{
    kA  = 0x00,
    kB  = 0x01,
    kG  = 0x02,
    kN  = 0x03,
    kAc = 0x04,
    kAx = 0x05,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 6,
};
#else  // CHIP_USE_ENUM_CLASS_FOR_IM_ENUM
using WiFiVersionType                                                                  = EmberAfWiFiVersionType;
static WiFiVersionType __attribute__((unused)) kWiFiVersionTypekUnknownEnumValue       = static_cast<WiFiVersionType>(6);
#endif // CHIP_USE_ENUM_CLASS_FOR_IM_ENUM
} // namespace WiFiNetworkDiagnostics

namespace EthernetNetworkDiagnostics {

// Need to convert consumers to using the new enum classes, so we
// don't just have casts all over.
#ifdef CHIP_USE_ENUM_CLASS_FOR_IM_ENUM
// Enum for PHYRateEnum
enum class PHYRateEnum : uint8_t
{
    kRate10M  = 0x00,
    kRate100M = 0x01,
    kRate1G   = 0x02,
    kRate25g  = 0x03,
    kRate5G   = 0x04,
    kRate10G  = 0x05,
    kRate40G  = 0x06,
    kRate100G = 0x07,
    kRate200G = 0x08,
    kRate400G = 0x09,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 10,
};
#else  // CHIP_USE_ENUM_CLASS_FOR_IM_ENUM
using PHYRateEnum                                                                      = EmberAfPHYRateEnum;
static PHYRateEnum __attribute__((unused)) kPHYRateEnumkUnknownEnumValue               = static_cast<PHYRateEnum>(10);
#endif // CHIP_USE_ENUM_CLASS_FOR_IM_ENUM
} // namespace EthernetNetworkDiagnostics

namespace TimeSynchronization {

// Enum for GranularityEnum
enum class GranularityEnum : uint8_t
{
    kNoTimeGranularity       = 0x00,
    kMinutesGranularity      = 0x01,
    kSecondsGranularity      = 0x02,
    kMillisecondsGranularity = 0x03,
    kMicrosecondsGranularity = 0x04,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 5,
};

// Enum for TimeSourceEnum
enum class TimeSourceEnum : uint8_t
{
    kNone             = 0x00,
    kUnknown          = 0x01,
    kAdmin            = 0x02,
    kNodeTimeCluster  = 0x03,
    kNonFabricSntp    = 0x04,
    kNonFabricNtp     = 0x05,
    kFabricSntp       = 0x06,
    kFabricNtp        = 0x07,
    kMixedNtp         = 0x08,
    kNonFabricSntpNts = 0x09,
    kNonFabricNtpNts  = 0x0A,
    kFabricSntpNts    = 0x0B,
    kFabricNtpNts     = 0x0C,
    kMixedNtpNts      = 0x0D,
    kCloudSource      = 0x0E,
    kPtp              = 0x0F,
    kGnss             = 0x10,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 17,
};
} // namespace TimeSynchronization

namespace BridgedDeviceBasicInformation {} // namespace BridgedDeviceBasicInformation

namespace Switch {

// Bitmap for SwitchFeature
enum class SwitchFeature : uint32_t
{
    kLatchingSwitch            = 0x1,
    kMomentarySwitch           = 0x2,
    kMomentarySwitchRelease    = 0x4,
    kMomentarySwitchLongPress  = 0x8,
    kMomentarySwitchMultiPress = 0x10,
};
} // namespace Switch

namespace AdministratorCommissioning {

// Enum for CommissioningWindowStatusEnum
enum class CommissioningWindowStatusEnum : uint8_t
{
    kWindowNotOpen      = 0x00,
    kEnhancedWindowOpen = 0x01,
    kBasicWindowOpen    = 0x02,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 3,
};

// Need to convert consumers to using the new enum classes, so we
// don't just have casts all over.
#ifdef CHIP_USE_ENUM_CLASS_FOR_IM_ENUM
// Enum for StatusCode
enum class StatusCode : uint8_t
{
    kBusy               = 0x02,
    kPAKEParameterError = 0x03,
    kWindowNotOpen      = 0x04,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 0,
};
#else  // CHIP_USE_ENUM_CLASS_FOR_IM_ENUM
using StatusCode                                                                       = EmberAfStatusCode;
static StatusCode __attribute__((unused)) kStatusCodekUnknownEnumValue                 = static_cast<StatusCode>(0);
#endif // CHIP_USE_ENUM_CLASS_FOR_IM_ENUM
} // namespace AdministratorCommissioning

namespace OperationalCredentials {

// Enum for CertificateChainTypeEnum
enum class CertificateChainTypeEnum : uint8_t
{
    kDACCertificate = 0x01,
    kPAICertificate = 0x02,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 0,
};

// Enum for NodeOperationalCertStatusEnum
enum class NodeOperationalCertStatusEnum : uint8_t
{
    kOk                  = 0x00,
    kInvalidPublicKey    = 0x01,
    kInvalidNodeOpId     = 0x02,
    kInvalidNOC          = 0x03,
    kMissingCsr          = 0x04,
    kTableFull           = 0x05,
    kInvalidAdminSubject = 0x06,
    kFabricConflict      = 0x09,
    kLabelConflict       = 0x0A,
    kInvalidFabricIndex  = 0x0B,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 7,
};
} // namespace OperationalCredentials

namespace GroupKeyManagement {

// Enum for GroupKeySecurityPolicy
enum class GroupKeySecurityPolicy : uint8_t
{
    kTrustFirst   = 0x00,
    kCacheAndSync = 0x01,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 2,
};
} // namespace GroupKeyManagement

namespace FixedLabel {} // namespace FixedLabel

namespace UserLabel {} // namespace UserLabel

namespace ProxyConfiguration {} // namespace ProxyConfiguration

namespace ProxyDiscovery {} // namespace ProxyDiscovery

namespace ProxyValid {} // namespace ProxyValid

namespace BooleanState {} // namespace BooleanState

namespace ModeSelect {

// Bitmap for ModeSelectFeature
enum class ModeSelectFeature : uint32_t
{
    kDeponoff = 0x1,
};
} // namespace ModeSelect

namespace DoorLock {

// Enum for AlarmCodeEnum
enum class AlarmCodeEnum : uint8_t
{
    kLockJammed              = 0x00,
    kLockFactoryReset        = 0x01,
    kLockRadioPowerCycled    = 0x03,
    kWrongCodeEntryLimit     = 0x04,
    kFrontEsceutcheonRemoved = 0x05,
    kDoorForcedOpen          = 0x06,
    kDoorAjar                = 0x07,
    kForcedUser              = 0x08,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 2,
};

// Enum for CredentialRuleEnum
enum class CredentialRuleEnum : uint8_t
{
    kSingle = 0x00,
    kDual   = 0x01,
    kTri    = 0x02,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 3,
};

// Enum for CredentialTypeEnum
enum class CredentialTypeEnum : uint8_t
{
    kProgrammingPIN = 0x00,
    kPin            = 0x01,
    kRfid           = 0x02,
    kFingerprint    = 0x03,
    kFingerVein     = 0x04,
    kFace           = 0x05,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 6,
};

// Enum for DataOperationTypeEnum
enum class DataOperationTypeEnum : uint8_t
{
    kAdd    = 0x00,
    kClear  = 0x01,
    kModify = 0x02,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 3,
};

// Enum for DlLockState
enum class DlLockState : uint8_t
{
    kNotFullyLocked = 0x00,
    kLocked         = 0x01,
    kUnlocked       = 0x02,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 3,
};

// Enum for DlLockType
enum class DlLockType : uint8_t
{
    kDeadBolt           = 0x00,
    kMagnetic           = 0x01,
    kOther              = 0x02,
    kMortise            = 0x03,
    kRim                = 0x04,
    kLatchBolt          = 0x05,
    kCylindricalLock    = 0x06,
    kTubularLock        = 0x07,
    kInterconnectedLock = 0x08,
    kDeadLatch          = 0x09,
    kDoorFurniture      = 0x0A,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 11,
};

// Enum for DlStatus
enum class DlStatus : uint8_t
{
    kSuccess           = 0x00,
    kFailure           = 0x01,
    kDuplicate         = 0x02,
    kOccupied          = 0x03,
    kInvalidField      = 0x85,
    kResourceExhausted = 0x89,
    kNotFound          = 0x8B,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 4,
};

// Enum for DoorLockOperationEventCode
enum class DoorLockOperationEventCode : uint8_t
{
    kUnknownOrMfgSpecific  = 0x00,
    kLock                  = 0x01,
    kUnlock                = 0x02,
    kLockInvalidPinOrId    = 0x03,
    kLockInvalidSchedule   = 0x04,
    kUnlockInvalidPinOrId  = 0x05,
    kUnlockInvalidSchedule = 0x06,
    kOneTouchLock          = 0x07,
    kKeyLock               = 0x08,
    kKeyUnlock             = 0x09,
    kAutoLock              = 0x0A,
    kScheduleLock          = 0x0B,
    kScheduleUnlock        = 0x0C,
    kManualLock            = 0x0D,
    kManualUnlock          = 0x0E,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 15,
};

// Enum for DoorLockProgrammingEventCode
enum class DoorLockProgrammingEventCode : uint8_t
{
    kUnknownOrMfgSpecific = 0x00,
    kMasterCodeChanged    = 0x01,
    kPinAdded             = 0x02,
    kPinDeleted           = 0x03,
    kPinChanged           = 0x04,
    kIdAdded              = 0x05,
    kIdDeleted            = 0x06,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 7,
};

// Enum for DoorLockSetPinOrIdStatus
enum class DoorLockSetPinOrIdStatus : uint8_t
{
    kSuccess            = 0x00,
    kGeneralFailure     = 0x01,
    kMemoryFull         = 0x02,
    kDuplicateCodeError = 0x03,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 4,
};

// Enum for DoorLockUserStatus
enum class DoorLockUserStatus : uint8_t
{
    kAvailable        = 0x00,
    kOccupiedEnabled  = 0x01,
    kOccupiedDisabled = 0x03,
    kNotSupported     = 0xFF,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 2,
};

// Enum for DoorLockUserType
enum class DoorLockUserType : uint8_t
{
    kUnrestricted        = 0x00,
    kYearDayScheduleUser = 0x01,
    kWeekDayScheduleUser = 0x02,
    kMasterUser          = 0x03,
    kNonAccessUser       = 0x04,
    kNotSupported        = 0xFF,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 5,
};

// Enum for DoorStateEnum
enum class DoorStateEnum : uint8_t
{
    kDoorOpen             = 0x00,
    kDoorClosed           = 0x01,
    kDoorJammed           = 0x02,
    kDoorForcedOpen       = 0x03,
    kDoorUnspecifiedError = 0x04,
    kDoorAjar             = 0x05,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 6,
};

// Enum for LockDataTypeEnum
enum class LockDataTypeEnum : uint8_t
{
    kUnspecified     = 0x00,
    kProgrammingCode = 0x01,
    kUserIndex       = 0x02,
    kWeekDaySchedule = 0x03,
    kYearDaySchedule = 0x04,
    kHolidaySchedule = 0x05,
    kPin             = 0x06,
    kRfid            = 0x07,
    kFingerprint     = 0x08,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 9,
};

// Enum for LockOperationTypeEnum
enum class LockOperationTypeEnum : uint8_t
{
    kLock               = 0x00,
    kUnlock             = 0x01,
    kNonAccessUserEvent = 0x02,
    kForcedUserEvent    = 0x03,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 4,
};

// Enum for OperatingModeEnum
enum class OperatingModeEnum : uint8_t
{
    kNormal             = 0x00,
    kVacation           = 0x01,
    kPrivacy            = 0x02,
    kNoRemoteLockUnlock = 0x03,
    kPassage            = 0x04,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 5,
};

// Enum for OperationErrorEnum
enum class OperationErrorEnum : uint8_t
{
    kUnspecified         = 0x00,
    kInvalidCredential   = 0x01,
    kDisabledUserDenied  = 0x02,
    kRestricted          = 0x03,
    kInsufficientBattery = 0x04,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 5,
};

// Enum for OperationSourceEnum
enum class OperationSourceEnum : uint8_t
{
    kUnspecified       = 0x00,
    kManual            = 0x01,
    kProprietaryRemote = 0x02,
    kKeypad            = 0x03,
    kAuto              = 0x04,
    kButton            = 0x05,
    kSchedule          = 0x06,
    kRemote            = 0x07,
    kRfid              = 0x08,
    kBiometric         = 0x09,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 10,
};

// Enum for UserStatusEnum
enum class UserStatusEnum : uint8_t
{
    kAvailable        = 0x00,
    kOccupiedEnabled  = 0x01,
    kOccupiedDisabled = 0x03,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 2,
};

// Enum for UserTypeEnum
enum class UserTypeEnum : uint8_t
{
    kUnrestrictedUser       = 0x00,
    kYearDayScheduleUser    = 0x01,
    kWeekDayScheduleUser    = 0x02,
    kProgrammingUser        = 0x03,
    kNonAccessUser          = 0x04,
    kForcedUser             = 0x05,
    kDisposableUser         = 0x06,
    kExpiringUser           = 0x07,
    kScheduleRestrictedUser = 0x08,
    kRemoteOnlyUser         = 0x09,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 10,
};

// Bitmap for DaysMaskMap
enum class DaysMaskMap : uint8_t
{
    kSunday    = 0x1,
    kMonday    = 0x2,
    kTuesday   = 0x4,
    kWednesday = 0x8,
    kThursday  = 0x10,
    kFriday    = 0x20,
    kSaturday  = 0x40,
};

// Bitmap for DlCredentialRuleMask
enum class DlCredentialRuleMask : uint8_t
{
    kSingle = 0x1,
    kDual   = 0x2,
    kTri    = 0x4,
};

// Bitmap for DlCredentialRulesSupport
enum class DlCredentialRulesSupport : uint8_t
{
    kSingle = 0x1,
    kDual   = 0x2,
    kTri    = 0x4,
};

// Bitmap for DlDefaultConfigurationRegister
enum class DlDefaultConfigurationRegister : uint16_t
{
    kEnableLocalProgrammingEnabled         = 0x1,
    kKeypadInterfaceDefaultAccessEnabled   = 0x2,
    kRemoteInterfaceDefaultAccessIsEnabled = 0x4,
    kSoundEnabled                          = 0x20,
    kAutoRelockTimeSet                     = 0x40,
    kLEDSettingsSet                        = 0x80,
};

// Bitmap for DlKeypadOperationEventMask
enum class DlKeypadOperationEventMask : uint16_t
{
    kUnknown               = 0x1,
    kLock                  = 0x2,
    kUnlock                = 0x4,
    kLockInvalidPIN        = 0x8,
    kLockInvalidSchedule   = 0x10,
    kUnlockInvalidCode     = 0x20,
    kUnlockInvalidSchedule = 0x40,
    kNonAccessUserOpEvent  = 0x80,
};

// Bitmap for DlKeypadProgrammingEventMask
enum class DlKeypadProgrammingEventMask : uint16_t
{
    kUnknown               = 0x1,
    kProgrammingPINChanged = 0x2,
    kPINAdded              = 0x4,
    kPINCleared            = 0x8,
    kPINChanged            = 0x10,
};

// Bitmap for DlLocalProgrammingFeatures
enum class DlLocalProgrammingFeatures : uint8_t
{
    kAddUsersCredentialsSchedulesLocally    = 0x1,
    kModifyUsersCredentialsSchedulesLocally = 0x2,
    kClearUsersCredentialsSchedulesLocally  = 0x4,
    kAdjustLockSettingsLocally              = 0x8,
};

// Bitmap for DlManualOperationEventMask
enum class DlManualOperationEventMask : uint16_t
{
    kUnknown         = 0x1,
    kThumbturnLock   = 0x2,
    kThumbturnUnlock = 0x4,
    kOneTouchLock    = 0x8,
    kKeyLock         = 0x10,
    kKeyUnlock       = 0x20,
    kAutoLock        = 0x40,
    kScheduleLock    = 0x80,
    kScheduleUnlock  = 0x100,
    kManualLock      = 0x200,
    kManualUnlock    = 0x400,
};

// Bitmap for DlRFIDOperationEventMask
enum class DlRFIDOperationEventMask : uint16_t
{
    kUnknown               = 0x1,
    kLock                  = 0x2,
    kUnlock                = 0x4,
    kLockInvalidRFID       = 0x8,
    kLockInvalidSchedule   = 0x10,
    kUnlockInvalidRFID     = 0x20,
    kUnlockInvalidSchedule = 0x40,
};

// Bitmap for DlRFIDProgrammingEventMask
enum class DlRFIDProgrammingEventMask : uint16_t
{
    kUnknown         = 0x1,
    kRFIDCodeAdded   = 0x20,
    kRFIDCodeCleared = 0x40,
};

// Bitmap for DlRemoteOperationEventMask
enum class DlRemoteOperationEventMask : uint16_t
{
    kUnknown               = 0x1,
    kLock                  = 0x2,
    kUnlock                = 0x4,
    kLockInvalidCode       = 0x8,
    kLockInvalidSchedule   = 0x10,
    kUnlockInvalidCode     = 0x20,
    kUnlockInvalidSchedule = 0x40,
};

// Bitmap for DlRemoteProgrammingEventMask
enum class DlRemoteProgrammingEventMask : uint16_t
{
    kUnknown               = 0x1,
    kProgrammingPINChanged = 0x2,
    kPINAdded              = 0x4,
    kPINCleared            = 0x8,
    kPINChanged            = 0x10,
    kRFIDCodeAdded         = 0x20,
    kRFIDCodeCleared       = 0x40,
};

// Bitmap for DlSupportedOperatingModes
enum class DlSupportedOperatingModes : uint16_t
{
    kNormal             = 0x1,
    kVacation           = 0x2,
    kPrivacy            = 0x4,
    kNoRemoteLockUnlock = 0x8,
    kPassage            = 0x10,
};

// Bitmap for DoorLockDayOfWeek
enum class DoorLockDayOfWeek : uint8_t
{
    kSunday    = 0x1,
    kMonday    = 0x2,
    kTuesday   = 0x4,
    kWednesday = 0x8,
    kThursday  = 0x10,
    kFriday    = 0x20,
    kSaturday  = 0x40,
};

// Bitmap for DoorLockFeature
enum class DoorLockFeature : uint32_t
{
    kPinCredential               = 0x1,
    kRfidCredential              = 0x2,
    kFingerCredentials           = 0x4,
    kLogging                     = 0x8,
    kWeekDayAccessSchedules      = 0x10,
    kDoorPositionSensor          = 0x20,
    kFaceCredentials             = 0x40,
    kCredentialsOverTheAirAccess = 0x80,
    kUser                        = 0x100,
    kNotification                = 0x200,
    kYearDayAccessSchedules      = 0x400,
    kHolidaySchedules            = 0x800,
};
} // namespace DoorLock

namespace WindowCovering {

// Enum for EndProductType
enum class EndProductType : uint8_t
{
    kRollerShade               = 0x00,
    kRomanShade                = 0x01,
    kBalloonShade              = 0x02,
    kWovenWood                 = 0x03,
    kPleatedShade              = 0x04,
    kCellularShade             = 0x05,
    kLayeredShade              = 0x06,
    kLayeredShade2D            = 0x07,
    kSheerShade                = 0x08,
    kTiltOnlyInteriorBlind     = 0x09,
    kInteriorBlind             = 0x0A,
    kVerticalBlindStripCurtain = 0x0B,
    kInteriorVenetianBlind     = 0x0C,
    kExteriorVenetianBlind     = 0x0D,
    kLateralLeftCurtain        = 0x0E,
    kLateralRightCurtain       = 0x0F,
    kCentralCurtain            = 0x10,
    kRollerShutter             = 0x11,
    kExteriorVerticalScreen    = 0x12,
    kAwningTerracePatio        = 0x13,
    kAwningVerticalScreen      = 0x14,
    kTiltOnlyPergola           = 0x15,
    kSwingingShutter           = 0x16,
    kSlidingShutter            = 0x17,
    kUnknown                   = 0xFF,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 24,
};

// Enum for Type
enum class Type : uint8_t
{
    kRollerShade               = 0x00,
    kRollerShade2Motor         = 0x01,
    kRollerShadeExterior       = 0x02,
    kRollerShadeExterior2Motor = 0x03,
    kDrapery                   = 0x04,
    kAwning                    = 0x05,
    kShutter                   = 0x06,
    kTiltBlindTiltOnly         = 0x07,
    kTiltBlindLiftAndTilt      = 0x08,
    kProjectorScreen           = 0x09,
    kUnknown                   = 0xFF,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 10,
};

// Bitmap for ConfigStatus
enum class ConfigStatus : uint8_t
{
    kOperational           = 0x1,
    kOnlineReserved        = 0x2,
    kLiftMovementReversed  = 0x4,
    kLiftPositionAware     = 0x8,
    kTiltPositionAware     = 0x10,
    kLiftEncoderControlled = 0x20,
    kTiltEncoderControlled = 0x40,
};

// Bitmap for Feature
enum class Feature : uint32_t
{
    kLift              = 0x1,
    kTilt              = 0x2,
    kPositionAwareLift = 0x4,
    kAbsolutePosition  = 0x8,
    kPositionAwareTilt = 0x10,
};

// Bitmap for Mode
enum class Mode : uint8_t
{
    kMotorDirectionReversed = 0x1,
    kCalibrationMode        = 0x2,
    kMaintenanceMode        = 0x4,
    kLedFeedback            = 0x8,
};

// Bitmap for OperationalStatus
enum class OperationalStatus : uint8_t
{
    kGlobal = 0x3,
    kLift   = 0xC,
    kTilt   = 0x30,
};

// Bitmap for SafetyStatus
enum class SafetyStatus : uint16_t
{
    kRemoteLockout       = 0x1,
    kTamperDetection     = 0x2,
    kFailedCommunication = 0x4,
    kPositionFailure     = 0x8,
    kThermalProtection   = 0x10,
    kObstacleDetected    = 0x20,
    kPower               = 0x40,
    kStopInput           = 0x80,
    kMotorJammed         = 0x100,
    kHardwareFailure     = 0x200,
    kManualOperation     = 0x400,
    kProtection          = 0x800,
};
} // namespace WindowCovering

namespace BarrierControl {} // namespace BarrierControl

namespace PumpConfigurationAndControl {

// Enum for PumpControlMode
enum class PumpControlMode : uint8_t
{
    kConstantSpeed        = 0x00,
    kConstantPressure     = 0x01,
    kProportionalPressure = 0x02,
    kConstantFlow         = 0x03,
    kConstantTemperature  = 0x05,
    kAutomatic            = 0x07,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 4,
};

// Enum for PumpOperationMode
enum class PumpOperationMode : uint8_t
{
    kNormal  = 0x00,
    kMinimum = 0x01,
    kMaximum = 0x02,
    kLocal   = 0x03,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 4,
};

// Bitmap for PumpFeature
enum class PumpFeature : uint32_t
{
    kConstantPressure    = 0x1,
    kCompensatedPressure = 0x2,
    kConstantFlow        = 0x4,
    kConstantSpeed       = 0x8,
    kConstantTemperature = 0x10,
    kAutomatic           = 0x20,
    kLocal               = 0x40,
};

// Bitmap for PumpStatus
enum class PumpStatus : uint16_t
{
    kDeviceFault       = 0x1,
    kSupplyfault       = 0x2,
    kSpeedLow          = 0x4,
    kSpeedHigh         = 0x8,
    kLocalOverride     = 0x10,
    kRunning           = 0x20,
    kRemotePressure    = 0x40,
    kRemoteFlow        = 0x80,
    kRemoteTemperature = 0x100,
};
} // namespace PumpConfigurationAndControl

namespace Thermostat {

// Enum for SetpointAdjustMode
enum class SetpointAdjustMode : uint8_t
{
    kHeat = 0x00,
    kCool = 0x01,
    kBoth = 0x02,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 3,
};

// Enum for ThermostatControlSequence
enum class ThermostatControlSequence : uint8_t
{
    kCoolingOnly                 = 0x00,
    kCoolingWithReheat           = 0x01,
    kHeatingOnly                 = 0x02,
    kHeatingWithReheat           = 0x03,
    kCoolingAndHeating           = 0x04,
    kCoolingAndHeatingWithReheat = 0x05,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 6,
};

// Enum for ThermostatRunningMode
enum class ThermostatRunningMode : uint8_t
{
    kOff  = 0x00,
    kCool = 0x03,
    kHeat = 0x04,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 1,
};

// Enum for ThermostatSystemMode
enum class ThermostatSystemMode : uint8_t
{
    kOff           = 0x00,
    kAuto          = 0x01,
    kCool          = 0x03,
    kHeat          = 0x04,
    kEmergencyHeat = 0x05,
    kPrecooling    = 0x06,
    kFanOnly       = 0x07,
    kDry           = 0x08,
    kSleep         = 0x09,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 2,
};

// Bitmap for DayOfWeek
enum class DayOfWeek : uint8_t
{
    kSunday    = 0x1,
    kMonday    = 0x2,
    kTuesday   = 0x4,
    kWednesday = 0x8,
    kThursday  = 0x10,
    kFriday    = 0x20,
    kSaturday  = 0x40,
    kAway      = 0x80,
};

// Bitmap for ModeForSequence
enum class ModeForSequence : uint8_t
{
    kHeatSetpointPresent = 0x1,
    kCoolSetpointPresent = 0x2,
};

// Bitmap for ThermostatFeature
enum class ThermostatFeature : uint32_t
{
    kHeating               = 0x1,
    kCooling               = 0x2,
    kOccupancy             = 0x4,
    kScheduleConfiguration = 0x8,
    kSetback               = 0x10,
    kAutoMode              = 0x20,
};
} // namespace Thermostat

namespace FanControl {

// Enum for FanModeSequenceType
enum class FanModeSequenceType : uint8_t
{
    kOffLowMedHigh     = 0x00,
    kOffLowHigh        = 0x01,
    kOffLowMedHighAuto = 0x02,
    kOffLowHighAuto    = 0x03,
    kOffOnAuto         = 0x04,
    kOffOn             = 0x05,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 6,
};

// Enum for FanModeType
enum class FanModeType : uint8_t
{
    kOff    = 0x00,
    kLow    = 0x01,
    kMedium = 0x02,
    kHigh   = 0x03,
    kOn     = 0x04,
    kAuto   = 0x05,
    kSmart  = 0x06,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 7,
};

// Bitmap for FanControlFeature
enum class FanControlFeature : uint32_t
{
    kMultiSpeed = 0x1,
    kAuto       = 0x2,
    kRocking    = 0x4,
    kWind       = 0x8,
};

// Bitmap for RockSupportMask
enum class RockSupportMask : uint8_t
{
    kRockLeftRight = 0x1,
    kRockUpDown    = 0x2,
    kRockRound     = 0x4,
};

// Bitmap for WindSettingMask
enum class WindSettingMask : uint8_t
{
    kSleepWind   = 0x1,
    kNaturalWind = 0x2,
};

// Bitmap for WindSupportMask
enum class WindSupportMask : uint8_t
{
    kSleepWind   = 0x1,
    kNaturalWind = 0x2,
};
} // namespace FanControl

namespace ThermostatUserInterfaceConfiguration {} // namespace ThermostatUserInterfaceConfiguration

namespace ColorControl {

// Need to convert consumers to using the new enum classes, so we
// don't just have casts all over.
#ifdef CHIP_USE_ENUM_CLASS_FOR_IM_ENUM
// Enum for ColorLoopAction
enum class ColorLoopAction : uint8_t
{
    kDeactivate                            = 0x00,
    kActivateFromColorLoopStartEnhancedHue = 0x01,
    kActivateFromEnhancedCurrentHue        = 0x02,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 3,
};
#else  // CHIP_USE_ENUM_CLASS_FOR_IM_ENUM
using ColorLoopAction                                                                  = EmberAfColorLoopAction;
static ColorLoopAction __attribute__((unused)) kColorLoopActionkUnknownEnumValue       = static_cast<ColorLoopAction>(3);
#endif // CHIP_USE_ENUM_CLASS_FOR_IM_ENUM

// Need to convert consumers to using the new enum classes, so we
// don't just have casts all over.
#ifdef CHIP_USE_ENUM_CLASS_FOR_IM_ENUM
// Enum for ColorLoopDirection
enum class ColorLoopDirection : uint8_t
{
    kDecrementHue = 0x00,
    kIncrementHue = 0x01,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 2,
};
#else  // CHIP_USE_ENUM_CLASS_FOR_IM_ENUM
using ColorLoopDirection                                                               = EmberAfColorLoopDirection;
static ColorLoopDirection __attribute__((unused)) kColorLoopDirectionkUnknownEnumValue = static_cast<ColorLoopDirection>(2);
#endif // CHIP_USE_ENUM_CLASS_FOR_IM_ENUM

// Need to convert consumers to using the new enum classes, so we
// don't just have casts all over.
#ifdef CHIP_USE_ENUM_CLASS_FOR_IM_ENUM
// Enum for ColorMode
enum class ColorMode : uint8_t
{
    kCurrentHueAndCurrentSaturation = 0x00,
    kCurrentXAndCurrentY            = 0x01,
    kColorTemperature               = 0x02,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 3,
};
#else  // CHIP_USE_ENUM_CLASS_FOR_IM_ENUM
using ColorMode                                                                        = EmberAfColorMode;
static ColorMode __attribute__((unused)) kColorModekUnknownEnumValue                   = static_cast<ColorMode>(3);
#endif // CHIP_USE_ENUM_CLASS_FOR_IM_ENUM

// Need to convert consumers to using the new enum classes, so we
// don't just have casts all over.
#ifdef CHIP_USE_ENUM_CLASS_FOR_IM_ENUM
// Enum for HueDirection
enum class HueDirection : uint8_t
{
    kShortestDistance = 0x00,
    kLongestDistance  = 0x01,
    kUp               = 0x02,
    kDown             = 0x03,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 4,
};
#else  // CHIP_USE_ENUM_CLASS_FOR_IM_ENUM
using HueDirection                                                                     = EmberAfHueDirection;
static HueDirection __attribute__((unused)) kHueDirectionkUnknownEnumValue             = static_cast<HueDirection>(4);
#endif // CHIP_USE_ENUM_CLASS_FOR_IM_ENUM

// Need to convert consumers to using the new enum classes, so we
// don't just have casts all over.
#ifdef CHIP_USE_ENUM_CLASS_FOR_IM_ENUM
// Enum for HueMoveMode
enum class HueMoveMode : uint8_t
{
    kStop = 0x00,
    kUp   = 0x01,
    kDown = 0x03,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 2,
};
#else  // CHIP_USE_ENUM_CLASS_FOR_IM_ENUM
using HueMoveMode                                                                      = EmberAfHueMoveMode;
static HueMoveMode __attribute__((unused)) kHueMoveModekUnknownEnumValue               = static_cast<HueMoveMode>(2);
#endif // CHIP_USE_ENUM_CLASS_FOR_IM_ENUM

// Need to convert consumers to using the new enum classes, so we
// don't just have casts all over.
#ifdef CHIP_USE_ENUM_CLASS_FOR_IM_ENUM
// Enum for HueStepMode
enum class HueStepMode : uint8_t
{
    kUp   = 0x01,
    kDown = 0x03,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 0,
};
#else  // CHIP_USE_ENUM_CLASS_FOR_IM_ENUM
using HueStepMode                                                                      = EmberAfHueStepMode;
static HueStepMode __attribute__((unused)) kHueStepModekUnknownEnumValue               = static_cast<HueStepMode>(0);
#endif // CHIP_USE_ENUM_CLASS_FOR_IM_ENUM

// Need to convert consumers to using the new enum classes, so we
// don't just have casts all over.
#ifdef CHIP_USE_ENUM_CLASS_FOR_IM_ENUM
// Enum for SaturationMoveMode
enum class SaturationMoveMode : uint8_t
{
    kStop = 0x00,
    kUp   = 0x01,
    kDown = 0x03,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 2,
};
#else  // CHIP_USE_ENUM_CLASS_FOR_IM_ENUM
using SaturationMoveMode                                                               = EmberAfSaturationMoveMode;
static SaturationMoveMode __attribute__((unused)) kSaturationMoveModekUnknownEnumValue = static_cast<SaturationMoveMode>(2);
#endif // CHIP_USE_ENUM_CLASS_FOR_IM_ENUM

// Need to convert consumers to using the new enum classes, so we
// don't just have casts all over.
#ifdef CHIP_USE_ENUM_CLASS_FOR_IM_ENUM
// Enum for SaturationStepMode
enum class SaturationStepMode : uint8_t
{
    kUp   = 0x01,
    kDown = 0x03,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 0,
};
#else  // CHIP_USE_ENUM_CLASS_FOR_IM_ENUM
using SaturationStepMode                                                               = EmberAfSaturationStepMode;
static SaturationStepMode __attribute__((unused)) kSaturationStepModekUnknownEnumValue = static_cast<SaturationStepMode>(0);
#endif // CHIP_USE_ENUM_CLASS_FOR_IM_ENUM

// Bitmap for ColorCapabilities
enum class ColorCapabilities : uint16_t
{
    kHueSaturationSupported    = 0x1,
    kEnhancedHueSupported      = 0x2,
    kColorLoopSupported        = 0x4,
    kXYAttributesSupported     = 0x8,
    kColorTemperatureSupported = 0x10,
};

// Bitmap for ColorControlFeature
enum class ColorControlFeature : uint32_t
{
    kHueAndSaturation = 0x1,
    kEnhancedHue      = 0x2,
    kColorLoop        = 0x4,
    kXy               = 0x8,
    kColorTemperature = 0x10,
};

// Bitmap for ColorLoopUpdateFlags
enum class ColorLoopUpdateFlags : uint8_t
{
    kUpdateAction    = 0x1,
    kUpdateDirection = 0x2,
    kUpdateTime      = 0x4,
    kUpdateStartHue  = 0x8,
};
} // namespace ColorControl

namespace BallastConfiguration {} // namespace BallastConfiguration

namespace IlluminanceMeasurement {

// Enum for LightSensorType
enum class LightSensorType : uint8_t
{
    kPhotodiode = 0x00,
    kCmos       = 0x01,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 2,
};
} // namespace IlluminanceMeasurement

namespace TemperatureMeasurement {} // namespace TemperatureMeasurement

namespace PressureMeasurement {

// Bitmap for PressureFeature
enum class PressureFeature : uint32_t
{
    kExtended = 0x1,
};
} // namespace PressureMeasurement

namespace FlowMeasurement {} // namespace FlowMeasurement

namespace RelativeHumidityMeasurement {} // namespace RelativeHumidityMeasurement

namespace OccupancySensing {} // namespace OccupancySensing

namespace WakeOnLan {} // namespace WakeOnLan

namespace Channel {

// Enum for ChannelStatusEnum
enum class ChannelStatusEnum : uint8_t
{
    kSuccess         = 0x00,
    kMultipleMatches = 0x01,
    kNoMatches       = 0x02,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 3,
};

// Enum for LineupInfoTypeEnum
enum class LineupInfoTypeEnum : uint8_t
{
    kMso = 0x00,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 1,
};

// Bitmap for ChannelFeature
enum class ChannelFeature : uint32_t
{
    kChannelList = 0x1,
    kLineupInfo  = 0x2,
};
} // namespace Channel

namespace TargetNavigator {

// Enum for TargetNavigatorStatusEnum
enum class TargetNavigatorStatusEnum : uint8_t
{
    kSuccess        = 0x00,
    kTargetNotFound = 0x01,
    kNotAllowed     = 0x02,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 3,
};
} // namespace TargetNavigator

namespace MediaPlayback {

// Enum for MediaPlaybackStatusEnum
enum class MediaPlaybackStatusEnum : uint8_t
{
    kSuccess                = 0x00,
    kInvalidStateForCommand = 0x01,
    kNotAllowed             = 0x02,
    kNotActive              = 0x03,
    kSpeedOutOfRange        = 0x04,
    kSeekOutOfRange         = 0x05,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 6,
};

// Enum for PlaybackStateEnum
enum class PlaybackStateEnum : uint8_t
{
    kPlaying    = 0x00,
    kPaused     = 0x01,
    kNotPlaying = 0x02,
    kBuffering  = 0x03,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 4,
};

// Bitmap for MediaPlaybackFeature
enum class MediaPlaybackFeature : uint32_t
{
    kAdvancedSeek  = 0x1,
    kVariableSpeed = 0x2,
};
} // namespace MediaPlayback

namespace MediaInput {

// Enum for InputTypeEnum
enum class InputTypeEnum : uint8_t
{
    kInternal  = 0x00,
    kAux       = 0x01,
    kCoax      = 0x02,
    kComposite = 0x03,
    kHdmi      = 0x04,
    kInput     = 0x05,
    kLine      = 0x06,
    kOptical   = 0x07,
    kVideo     = 0x08,
    kScart     = 0x09,
    kUsb       = 0x0A,
    kOther     = 0x0B,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 12,
};

// Bitmap for MediaInputFeature
enum class MediaInputFeature : uint32_t
{
    kNameUpdates = 0x1,
};
} // namespace MediaInput

namespace LowPower {} // namespace LowPower

namespace KeypadInput {

// Enum for CecKeyCode
enum class CecKeyCode : uint8_t
{
    kSelect                    = 0x00,
    kUp                        = 0x01,
    kDown                      = 0x02,
    kLeft                      = 0x03,
    kRight                     = 0x04,
    kRightUp                   = 0x05,
    kRightDown                 = 0x06,
    kLeftUp                    = 0x07,
    kLeftDown                  = 0x08,
    kRootMenu                  = 0x09,
    kSetupMenu                 = 0x0A,
    kContentsMenu              = 0x0B,
    kFavoriteMenu              = 0x0C,
    kExit                      = 0x0D,
    kMediaTopMenu              = 0x10,
    kMediaContextSensitiveMenu = 0x11,
    kNumberEntryMode           = 0x1D,
    kNumber11                  = 0x1E,
    kNumber12                  = 0x1F,
    kNumber0OrNumber10         = 0x20,
    kNumbers1                  = 0x21,
    kNumbers2                  = 0x22,
    kNumbers3                  = 0x23,
    kNumbers4                  = 0x24,
    kNumbers5                  = 0x25,
    kNumbers6                  = 0x26,
    kNumbers7                  = 0x27,
    kNumbers8                  = 0x28,
    kNumbers9                  = 0x29,
    kDot                       = 0x2A,
    kEnter                     = 0x2B,
    kClear                     = 0x2C,
    kNextFavorite              = 0x2F,
    kChannelUp                 = 0x30,
    kChannelDown               = 0x31,
    kPreviousChannel           = 0x32,
    kSoundSelect               = 0x33,
    kInputSelect               = 0x34,
    kDisplayInformation        = 0x35,
    kHelp                      = 0x36,
    kPageUp                    = 0x37,
    kPageDown                  = 0x38,
    kPower                     = 0x40,
    kVolumeUp                  = 0x41,
    kVolumeDown                = 0x42,
    kMute                      = 0x43,
    kPlay                      = 0x44,
    kStop                      = 0x45,
    kPause                     = 0x46,
    kRecord                    = 0x47,
    kRewind                    = 0x48,
    kFastForward               = 0x49,
    kEject                     = 0x4A,
    kForward                   = 0x4B,
    kBackward                  = 0x4C,
    kStopRecord                = 0x4D,
    kPauseRecord               = 0x4E,
    kReserved                  = 0x4F,
    kAngle                     = 0x50,
    kSubPicture                = 0x51,
    kVideoOnDemand             = 0x52,
    kElectronicProgramGuide    = 0x53,
    kTimerProgramming          = 0x54,
    kInitialConfiguration      = 0x55,
    kSelectBroadcastType       = 0x56,
    kSelectSoundPresentation   = 0x57,
    kPlayFunction              = 0x60,
    kPausePlayFunction         = 0x61,
    kRecordFunction            = 0x62,
    kPauseRecordFunction       = 0x63,
    kStopFunction              = 0x64,
    kMuteFunction              = 0x65,
    kRestoreVolumeFunction     = 0x66,
    kTuneFunction              = 0x67,
    kSelectMediaFunction       = 0x68,
    kSelectAvInputFunction     = 0x69,
    kSelectAudioInputFunction  = 0x6A,
    kPowerToggleFunction       = 0x6B,
    kPowerOffFunction          = 0x6C,
    kPowerOnFunction           = 0x6D,
    kF1Blue                    = 0x71,
    kF2Red                     = 0x72,
    kF3Green                   = 0x73,
    kF4Yellow                  = 0x74,
    kF5                        = 0x75,
    kData                      = 0x76,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 14,
};

// Enum for KeypadInputStatusEnum
enum class KeypadInputStatusEnum : uint8_t
{
    kSuccess                  = 0x00,
    kUnsupportedKey           = 0x01,
    kInvalidKeyInCurrentState = 0x02,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 3,
};

// Bitmap for KeypadInputFeature
enum class KeypadInputFeature : uint32_t
{
    kNavigationKeyCodes = 0x1,
    kLocationKeys       = 0x2,
    kNumberKeys         = 0x4,
};
} // namespace KeypadInput

namespace ContentLauncher {

// Enum for ContentLaunchStatusEnum
enum class ContentLaunchStatusEnum : uint8_t
{
    kSuccess         = 0x00,
    kUrlNotAvailable = 0x01,
    kAuthFailed      = 0x02,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 3,
};

// Enum for MetricTypeEnum
enum class MetricTypeEnum : uint8_t
{
    kPixels     = 0x00,
    kPercentage = 0x01,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 2,
};

// Enum for ParameterEnum
enum class ParameterEnum : uint8_t
{
    kActor      = 0x00,
    kChannel    = 0x01,
    kCharacter  = 0x02,
    kDirector   = 0x03,
    kEvent      = 0x04,
    kFranchise  = 0x05,
    kGenre      = 0x06,
    kLeague     = 0x07,
    kPopularity = 0x08,
    kProvider   = 0x09,
    kSport      = 0x0A,
    kSportsTeam = 0x0B,
    kType       = 0x0C,
    kVideo      = 0x0D,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 14,
};

// Bitmap for ContentLauncherFeature
enum class ContentLauncherFeature : uint32_t
{
    kContentSearch = 0x1,
    kURLPlayback   = 0x2,
};

// Bitmap for SupportedStreamingProtocol
enum class SupportedStreamingProtocol : uint32_t
{
    kDash = 0x1,
    kHls  = 0x2,
};
} // namespace ContentLauncher

namespace AudioOutput {

// Enum for OutputTypeEnum
enum class OutputTypeEnum : uint8_t
{
    kHdmi      = 0x00,
    kBt        = 0x01,
    kOptical   = 0x02,
    kHeadphone = 0x03,
    kInternal  = 0x04,
    kOther     = 0x05,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 6,
};

// Bitmap for AudioOutputFeature
enum class AudioOutputFeature : uint32_t
{
    kNameUpdates = 0x1,
};
} // namespace AudioOutput

namespace ApplicationLauncher {

// Enum for ApplicationLauncherStatusEnum
enum class ApplicationLauncherStatusEnum : uint8_t
{
    kSuccess         = 0x00,
    kAppNotAvailable = 0x01,
    kSystemBusy      = 0x02,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 3,
};

// Bitmap for ApplicationLauncherFeature
enum class ApplicationLauncherFeature : uint32_t
{
    kApplicationPlatform = 0x1,
};
} // namespace ApplicationLauncher

namespace ApplicationBasic {

// Enum for ApplicationStatusEnum
enum class ApplicationStatusEnum : uint8_t
{
    kStopped               = 0x00,
    kActiveVisibleFocus    = 0x01,
    kActiveHidden          = 0x02,
    kActiveVisibleNotFocus = 0x03,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 4,
};
} // namespace ApplicationBasic

namespace AccountLogin {} // namespace AccountLogin

namespace ElectricalMeasurement {} // namespace ElectricalMeasurement

namespace ClientMonitoring {} // namespace ClientMonitoring

namespace UnitTesting {

// Enum for SimpleEnum
enum class SimpleEnum : uint8_t
{
    kUnspecified = 0x00,
    kValueA      = 0x01,
    kValueB      = 0x02,
    kValueC      = 0x03,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 4,
};

// Bitmap for Bitmap16MaskMap
enum class Bitmap16MaskMap : uint16_t
{
    kMaskVal1 = 0x1,
    kMaskVal2 = 0x2,
    kMaskVal3 = 0x4,
    kMaskVal4 = 0x4000,
};

// Bitmap for Bitmap32MaskMap
enum class Bitmap32MaskMap : uint32_t
{
    kMaskVal1 = 0x1,
    kMaskVal2 = 0x2,
    kMaskVal3 = 0x4,
    kMaskVal4 = 0x40000000,
};

// Bitmap for Bitmap64MaskMap
enum class Bitmap64MaskMap : uint64_t
{
    kMaskVal1 = 0x1,
    kMaskVal2 = 0x2,
    kMaskVal3 = 0x4,
    kMaskVal4 = 0x4000000000000000,
};

// Bitmap for Bitmap8MaskMap
enum class Bitmap8MaskMap : uint8_t
{
    kMaskVal1 = 0x1,
    kMaskVal2 = 0x2,
    kMaskVal3 = 0x4,
    kMaskVal4 = 0x40,
};

// Bitmap for SimpleBitmap
enum class SimpleBitmap : uint8_t
{
    kValueA = 0x1,
    kValueB = 0x2,
    kValueC = 0x4,
};
} // namespace UnitTesting

namespace FaultInjection {

// Enum for FaultType
enum class FaultType : uint8_t
{
    kUnspecified = 0x00,
    kSystemFault = 0x01,
    kInetFault   = 0x02,
    kChipFault   = 0x03,
    kCertFault   = 0x04,
    // All received enum values that are not listed above will be mapped
    // to kUnknownEnumValue. This is a helper enum value that should only
    // be used by code to process how it handles receiving and unknown
    // enum value. This specific should never be transmitted.
    kUnknownEnumValue = 5,
};
} // namespace FaultInjection

} // namespace Clusters
} // namespace app
} // namespace chip