| /* |
| * |
| * Copyright (c) 2022 Project CHIP Authors |
| * All rights reserved. |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include "BindingHandler.h" |
| #ifdef CONFIG_CHIP_LIB_SHELL |
| #include "ShellCommands.h" |
| #endif |
| |
| #include <zephyr/logging/log.h> |
| LOG_MODULE_DECLARE(app, CONFIG_CHIP_APP_LOG_LEVEL); |
| |
| using namespace chip; |
| using namespace chip::app; |
| |
| void BindingHandler::Init() |
| { |
| #ifdef CONFIG_CHIP_LIB_SHELL |
| SwitchCommands::RegisterSwitchCommands(); |
| #endif |
| DeviceLayer::PlatformMgr().ScheduleWork(InitInternal); |
| } |
| |
| void BindingHandler::OnInvokeCommandFailure(BindingData & aBindingData, CHIP_ERROR aError) |
| { |
| CHIP_ERROR error; |
| |
| if (aError == CHIP_ERROR_TIMEOUT && !BindingHandler::GetInstance().mCaseSessionRecovered) |
| { |
| LOG_INF("Response timeout for invoked command, trying to recover CASE session."); |
| |
| // Set flag to not try recover session multiple times. |
| BindingHandler::GetInstance().mCaseSessionRecovered = true; |
| |
| // Allocate new object to make sure its life time will be appropriate. |
| BindingHandler::BindingData * data = Platform::New<BindingHandler::BindingData>(); |
| *data = aBindingData; |
| |
| // Establish new CASE session and retrasmit command that was not applied. |
| error = BindingManager::GetInstance().NotifyBoundClusterChanged(aBindingData.EndpointId, aBindingData.ClusterId, |
| static_cast<void *>(data)); |
| |
| if (CHIP_NO_ERROR != error) |
| { |
| LOG_ERR("NotifyBoundClusterChanged failed due to: %" CHIP_ERROR_FORMAT, error.Format()); |
| return; |
| } |
| } |
| else |
| { |
| LOG_ERR("Binding command was not applied! Reason: %" CHIP_ERROR_FORMAT, aError.Format()); |
| } |
| } |
| |
| void BindingHandler::OnOffProcessCommand(CommandId aCommandId, const EmberBindingTableEntry & aBinding, |
| OperationalDeviceProxy * aDevice, void * aContext) |
| { |
| CHIP_ERROR ret = CHIP_NO_ERROR; |
| BindingData * data = reinterpret_cast<BindingData *>(aContext); |
| |
| auto onSuccess = [](const ConcreteCommandPath & commandPath, const StatusIB & status, const auto & dataResponse) { |
| LOG_DBG("Binding command applied successfully!"); |
| |
| // If session was recovered and communication works, reset flag to the initial state. |
| if (BindingHandler::GetInstance().mCaseSessionRecovered) |
| BindingHandler::GetInstance().mCaseSessionRecovered = false; |
| }; |
| |
| auto onFailure = [dataRef = *data](CHIP_ERROR aError) mutable { BindingHandler::OnInvokeCommandFailure(dataRef, aError); }; |
| |
| if (aDevice) |
| { |
| // We are validating connection is ready once here instead of multiple times in each case statement below. |
| VerifyOrDie(aDevice->ConnectionReady()); |
| } |
| |
| switch (aCommandId) |
| { |
| case Clusters::OnOff::Commands::Toggle::Id: |
| Clusters::OnOff::Commands::Toggle::Type toggleCommand; |
| if (aDevice) |
| { |
| ret = Controller::InvokeCommandRequest(aDevice->GetExchangeManager(), aDevice->GetSecureSession().Value(), |
| aBinding.remote, toggleCommand, onSuccess, onFailure); |
| } |
| else |
| { |
| |
| Messaging::ExchangeManager & exchangeMgr = Server::GetInstance().GetExchangeManager(); |
| ret = Controller::InvokeGroupCommandRequest(&exchangeMgr, aBinding.fabricIndex, aBinding.groupId, toggleCommand); |
| } |
| break; |
| |
| case Clusters::OnOff::Commands::On::Id: |
| Clusters::OnOff::Commands::On::Type onCommand; |
| if (aDevice) |
| { |
| ret = Controller::InvokeCommandRequest(aDevice->GetExchangeManager(), aDevice->GetSecureSession().Value(), |
| aBinding.remote, onCommand, onSuccess, onFailure); |
| } |
| else |
| { |
| Messaging::ExchangeManager & exchangeMgr = Server::GetInstance().GetExchangeManager(); |
| ret = Controller::InvokeGroupCommandRequest(&exchangeMgr, aBinding.fabricIndex, aBinding.groupId, onCommand); |
| } |
| break; |
| |
| case Clusters::OnOff::Commands::Off::Id: |
| Clusters::OnOff::Commands::Off::Type offCommand; |
| if (aDevice) |
| { |
| ret = Controller::InvokeCommandRequest(aDevice->GetExchangeManager(), aDevice->GetSecureSession().Value(), |
| aBinding.remote, offCommand, onSuccess, onFailure); |
| } |
| else |
| { |
| Messaging::ExchangeManager & exchangeMgr = Server::GetInstance().GetExchangeManager(); |
| ret = Controller::InvokeGroupCommandRequest(&exchangeMgr, aBinding.fabricIndex, aBinding.groupId, offCommand); |
| } |
| break; |
| default: |
| LOG_DBG("Invalid binding command data - commandId is not supported"); |
| break; |
| } |
| if (CHIP_NO_ERROR != ret) |
| { |
| LOG_ERR("Invoke OnOff Command Request ERROR: %s", ErrorStr(ret)); |
| } |
| } |
| |
| void BindingHandler::LevelControlProcessCommand(CommandId aCommandId, const EmberBindingTableEntry & aBinding, |
| OperationalDeviceProxy * aDevice, void * aContext) |
| { |
| BindingData * data = reinterpret_cast<BindingData *>(aContext); |
| |
| auto onSuccess = [](const ConcreteCommandPath & commandPath, const StatusIB & status, const auto & dataResponse) { |
| LOG_DBG("Binding command applied successfully!"); |
| |
| // If session was recovered and communication works, reset flag to the initial state. |
| if (BindingHandler::GetInstance().mCaseSessionRecovered) |
| BindingHandler::GetInstance().mCaseSessionRecovered = false; |
| }; |
| |
| auto onFailure = [dataRef = *data](CHIP_ERROR aError) mutable { BindingHandler::OnInvokeCommandFailure(dataRef, aError); }; |
| |
| CHIP_ERROR ret = CHIP_NO_ERROR; |
| |
| if (aDevice) |
| { |
| // We are validating connection is ready once here instead of multiple times in each case statement below. |
| VerifyOrDie(aDevice->ConnectionReady()); |
| } |
| |
| switch (aCommandId) |
| { |
| case Clusters::LevelControl::Commands::MoveToLevel::Id: { |
| Clusters::LevelControl::Commands::MoveToLevel::Type moveToLevelCommand; |
| moveToLevelCommand.level = data->Value; |
| if (aDevice) |
| { |
| ret = Controller::InvokeCommandRequest(aDevice->GetExchangeManager(), aDevice->GetSecureSession().Value(), |
| aBinding.remote, moveToLevelCommand, onSuccess, onFailure); |
| } |
| else |
| { |
| Messaging::ExchangeManager & exchangeMgr = Server::GetInstance().GetExchangeManager(); |
| ret = Controller::InvokeGroupCommandRequest(&exchangeMgr, aBinding.fabricIndex, aBinding.groupId, moveToLevelCommand); |
| } |
| } |
| break; |
| default: |
| LOG_DBG("Invalid binding command data - commandId is not supported"); |
| break; |
| } |
| if (CHIP_NO_ERROR != ret) |
| { |
| LOG_ERR("Invoke Group Command Request ERROR: %s", ErrorStr(ret)); |
| } |
| } |
| |
| void BindingHandler::LightSwitchChangedHandler(const EmberBindingTableEntry & binding, OperationalDeviceProxy * deviceProxy, |
| void * context) |
| { |
| VerifyOrReturn(context != nullptr, LOG_ERR("Invalid context for Light switch handler");); |
| BindingData * data = static_cast<BindingData *>(context); |
| |
| if (binding.type == EMBER_MULTICAST_BINDING && data->IsGroup) |
| { |
| switch (data->ClusterId) |
| { |
| case Clusters::OnOff::Id: |
| OnOffProcessCommand(data->CommandId, binding, nullptr, context); |
| break; |
| case Clusters::LevelControl::Id: |
| LevelControlProcessCommand(data->CommandId, binding, nullptr, context); |
| break; |
| default: |
| LOG_ERR("Invalid binding group command data"); |
| break; |
| } |
| } |
| else if (binding.type == EMBER_UNICAST_BINDING && !data->IsGroup) |
| { |
| switch (data->ClusterId) |
| { |
| case Clusters::OnOff::Id: |
| OnOffProcessCommand(data->CommandId, binding, deviceProxy, context); |
| break; |
| case Clusters::LevelControl::Id: |
| LevelControlProcessCommand(data->CommandId, binding, deviceProxy, context); |
| break; |
| default: |
| LOG_ERR("Invalid binding unicast command data"); |
| break; |
| } |
| } |
| } |
| |
| void BindingHandler::LightSwitchContextReleaseHandler(void * context) |
| { |
| VerifyOrReturn(context != nullptr, LOG_ERR("Invalid context for Light switch context release handler");); |
| |
| Platform::Delete(static_cast<BindingData *>(context)); |
| } |
| |
| void BindingHandler::InitInternal(intptr_t aArg) |
| { |
| LOG_INF("Initialize binding Handler"); |
| auto & server = Server::GetInstance(); |
| if (CHIP_NO_ERROR != |
| BindingManager::GetInstance().Init( |
| { &server.GetFabricTable(), server.GetCASESessionManager(), &server.GetPersistentStorage() })) |
| { |
| LOG_ERR("BindingHandler::InitInternal failed"); |
| } |
| |
| BindingManager::GetInstance().RegisterBoundDeviceChangedHandler(LightSwitchChangedHandler); |
| BindingManager::GetInstance().RegisterBoundDeviceContextReleaseHandler(LightSwitchContextReleaseHandler); |
| BindingHandler::GetInstance().PrintBindingTable(); |
| } |
| |
| bool BindingHandler::IsGroupBound() |
| { |
| BindingTable & bindingTable = BindingTable::GetInstance(); |
| |
| for (auto & entry : bindingTable) |
| { |
| if (EMBER_MULTICAST_BINDING == entry.type) |
| { |
| return true; |
| } |
| } |
| return false; |
| } |
| |
| void BindingHandler::PrintBindingTable() |
| { |
| BindingTable & bindingTable = BindingTable::GetInstance(); |
| |
| LOG_INF("Binding Table size: [%d]:", bindingTable.Size()); |
| uint8_t i = 0; |
| for (auto & entry : bindingTable) |
| { |
| switch (entry.type) |
| { |
| case EMBER_UNICAST_BINDING: |
| LOG_INF("[%d] UNICAST:", i++); |
| LOG_INF("\t\t+ Fabric: %d\n \ |
| \t+ LocalEndpoint %d \n \ |
| \t+ ClusterId %d \n \ |
| \t+ RemoteEndpointId %d \n \ |
| \t+ NodeId %d", |
| (int) entry.fabricIndex, (int) entry.local, (int) entry.clusterId.Value(), (int) entry.remote, |
| (int) entry.nodeId); |
| break; |
| case EMBER_MULTICAST_BINDING: |
| LOG_INF("[%d] GROUP:", i++); |
| LOG_INF("\t\t+ Fabric: %d\n \ |
| \t+ LocalEndpoint %d \n \ |
| \t+ RemoteEndpointId %d \n \ |
| \t+ GroupId %d", |
| (int) entry.fabricIndex, (int) entry.local, (int) entry.remote, (int) entry.groupId); |
| break; |
| case EMBER_UNUSED_BINDING: |
| LOG_INF("[%d] UNUSED", i++); |
| break; |
| default: |
| break; |
| } |
| } |
| } |
| |
| void BindingHandler::SwitchWorkerHandler(intptr_t aContext) |
| { |
| VerifyOrReturn(aContext != 0, LOG_ERR("Invalid Swich data")); |
| |
| BindingData * data = reinterpret_cast<BindingData *>(aContext); |
| LOG_INF("Notify Bounded Cluster | endpoint: %d cluster: %d", data->EndpointId, data->ClusterId); |
| BindingManager::GetInstance().NotifyBoundClusterChanged(data->EndpointId, data->ClusterId, static_cast<void *>(data)); |
| } |