# Copyright (c) 2021 Project CHIP Authors
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# Auto-generated scripts for harness use only, please review before automation. The endpoints and cluster names are currently set to default

name:
    19.13.1. [TC-MC-11.1] Casting Video Player via User-Directed Commissioning
    Verification (DUT as Server)

PICS:
    - MC.S.M.UDCLOGIN

config:
    nodeId: 0x12344321
    cluster: "Basic Information"
    endpoint: 0

tests:
    - label: "Note"
      verification: |
          Refer to device or application documentation for supported DUT configuration.
          For step 3 (prompt user), manufacturer may utilize a custom method for obtaining user consent other than an on-screen prompt.
          Refer to manufacturer provided instructions for special argument values to each command, and/or additional steps required to put DUT into correct state to exhibit test behavior.
      disabled: true

    - label: "Pre-Conditions"
      verification: |
          1. DUT and Harness support Commissioner Discovery feature
          2. DUT is already in the network
          3. DUT supports AccountLogin cluster for certain Content Apps
      disabled: true

    - label:
          "Step 1: TH start scanning for available commissioners using
          Commissioner Discovery"
      verification: |
          ./chip-tv-casting-app

          The shell should show a discovered commissioner, similar to the following:

          [1653089767279] [88361:1149415] CHIP: [SVR] Discovered Commissioner #0
          [1653089767279] [88361:1149415] CHIP: [DIS]         Hostname: 147dda9ac00a
          [1653089767279] [88361:1149415] CHIP: [DIS]         IP Address #1: 169.254.81.148
          [1653089767279] [88361:1149415] CHIP: [DIS]         Port: 5650
          [1653089767279] [88361:1149415] CHIP: [DIS]         Mrp Interval idle: 5000 ms
          [1653089767279] [88361:1149415] CHIP: [DIS]         Mrp Interval active: 2000 ms
          [1653089767279] [88361:1149415] CHIP: [DIS]         Device Name: Test TV
          [1653089767279] [88361:1149415] CHIP: [DIS]         Vendor ID: 65521
          [1653089767279] [88361:1149415] CHIP: [DIS]         Product ID: 32769
          [1653089767279] [88361:1149415] CHIP: [DIS]         Device Type: 35
          [1653089767279] [88361:1149415] CHIP: [DIS]         Instance Name: 3DC86F5236D636CB
          [1653089767279] [88361:1149415] CHIP: [DIS]         Commissioning Mode: 0
          [1653089767279] [88361:1149415] CHIP: [SVR] 1 commissioner(s) discovered. Select one (by number# above) to request commissioning from:
          [1653089767279] [88361:1149415] CHIP: [SVR] Example: cast request 0
      disabled: true

    - label:
          "Step 2: TH is instructed to select the commissioner found in step 1"
      verification: |
          Into the shell, enter "cast request 0" to send a user-directed-commissioning request to the DUT

          > cast request 0
          [1653179218011] [47890:1899175] CHIP: [DL] request
          [1653179218011] [47890:1899175] CHIP: [SVR]   ------- PrepareForCommissioning
          [1653179218011] [47890:1899175] CHIP: [SVR] Server initializing...
      disabled: true

    - label:
          "Step 3: DUT prompt user for onboarding by giving an option to accept
          or reject the commissioning of TH ."
      verification: |
          UX will vary by product maker. The following is the tv-app shell output:

          [1653179219087] [89108:1898759] CHIP: [CTL] ------PROMPT USER: Test TV casting app is requesting permission to cast to this TV, approve? [0x0000_FFF1,0x0000_8001,E0707BB1AFFA6F23,020096D16895275F1B49A07221F0E588E06B]

          [1653179219087] [89108:1898759] CHIP: [CTL] ------Via Shell Enter: controller ux ok|cancel
      disabled: true

    - label:
          "Step 4: DUT start the commissioning procedure with TH, when user
          accepts the commissioning"
      verification: |
          Into the DUT UX, accept request for commissioning. Manufacturer may utilize a custom method for obtaining user consent other than an on-screen prompt.

          The following is the tv-app shell command to accept the request

          > controller ux ok

          The commissioning success completion is indicated in the TH with the following shell output:

          [1653088463910] [86837:1122544] CHIP: [SVR] Commissioning completed successfully
      disabled: true

    - label: "Step 5: TH reads the endpoints from the DUT"
      verification: |
          Into the shell, enter " cast cluster descriptor read  device-type-list  0 1" to read the device list of the descriptor cluster on endpoint 1

          > cast cluster descriptor read  device-type-list  0 1
          ....
          [1653180010083] [48426:1914389] CHIP: [TOO] Endpoint: 1 Cluster: 0x0000_001D Attribute 0x0000_0000 DataVersion: 2009082322
          [1653180010083] [48426:1914389] CHIP: [TOO]   device list: 1 entries
          [1653180010083] [48426:1914389] CHIP: [TOO]     [1]: {
          [1653180010083] [48426:1914389] CHIP: [TOO]       Type: 35
          [1653180010083] [48426:1914389] CHIP: [TOO]       Revision: 1
          [1653180010083] [48426:1914389] CHIP: [TOO]      }
      disabled: true

    - label: "Step 6: TH reads the endpoints from the DUT"
      verification: |
          Into the shell, enter "cast cluster descriptor read  device-type-list  0 2" to read the device list of the descriptor cluster on endpoint 2

          > cast cluster descriptor read  device-type-list  0 2
          ....
          [1653180162379] [48426:1917385] CHIP: [TOO] Endpoint: 2 Cluster: 0x0000_001D Attribute 0x0000_0000 DataVersion: 631462374
          [1653180162379] [48426:1917385] CHIP: [TOO]   device list: 1 entries
          [1653180162379] [48426:1917385] CHIP: [TOO]     [1]: {
          [1653180162379] [48426:1917385] CHIP: [TOO]       Type: 34
          [1653180162379] [48426:1917385] CHIP: [TOO]       Revision: 1
          [1653180162379] [48426:1917385] CHIP: [TOO]      }
      disabled: true

    - label: "Step 7: TH reads the endpoints from the DUT"
      verification: |
          Into the shell, enter "cast cluster descriptor read  device-type-list 0 4" to read the device list of the descriptor cluster on endpoint 4

          Descriptor cluster is supporting  endpoint 1 and 2 in RPI platform hence if TH  tried to read the device list of the descriptor cluster on endpoint 4  from the DUT, DUT should send the response as UNSUPPORTED_ENDPOINT,
          It may vary based the DUT
          > cast cluster descriptor read  device-type-list 0 4
          ....
          [1653180214397] [48426:1919098] CHIP: [TOO] Endpoint: 6 Cluster: 0x0000_001D Attribute 0x0000_0000 DataVersion: 4094146641
          [1653180214397] [48426:1919098] CHIP: [TOO]   device list: 1 entries
          [1653180214397] [48426:1919098] CHIP: [TOO]     [1]: {
          [1653180214397] [48426:1919098] CHIP: [TOO]       Type: 36
          [1653180214397] [48426:1919098] CHIP: [TOO]       Revision: 1
          [1653180214397] [48426:1919098] CHIP: [TOO]      }
      disabled: true