tree: a0adeffc1b0f5ce2b4a2307168480fa233bc2981 [path history] [tgz]
  1. include/
  2. src/
  3. third_party/
  4. .gn
  5. args.gni
  6. BUILD.gn
  7. build_for_wifi_args.gni
  8. build_for_wifi_gnfile.gn
  9. mt793x_xip.ld
  10. README.md
  11. with_pw_rpc.gni
examples/lighting-app/genio/README.md

#CHIP Genio Lighting Example

An example showing the use of CHIP on the MediaTek Genio MT793X.

Introduction

The Genio (MT793X) lighting example provides a baseline demonstration of a Light control device, built using CHIP and the MediaTek Genio SDK. It can be controlled by a Chip controller over Wi-Fi network.

The Genio device can be commissioned over Bluetooth Low Energy where the device and the Chip controller will exchange security information with the Rendez-vous procedure. Network credentials are then provided to the Genio device which will then join the network.

The lighting example is intended to serve both as a means to explore the workings of CHIP as well as a template for creating real products based on the MediaTek platform.

Building

  • Following the Linux related descriptions in Build Matter to prepare the build environment.

  • Supported hardware:

    Genio 130A (MT7931) board:

    • EK-AI7931LD KIT
  • Build the example application:

      `cd ~/connectedhomeip`
      `./scripts/examples/gn_genio_example.sh ./examples/lighting-app/genio` `./out/lighting-app`
    
  • To delete generated executable, libraries and object files use:

      `$ cd ~/connectedhomeip`
      `$ rm -rf ./out/`
    

    OR use GN/Ninja directly

      `$ cd ~/connectedhomeip/examples/lighting-app/genio`
      `$ git submodule update --init`
      `$ source third_party/connectedhomeip/scripts/activate.sh`
      `$ gn gen out/debug`
      `$ ninja -C out/debug`
    
  • To delete generated executable, libraries and object files use:

      `$ cd ~/connectedhomeip/examples/lighting-app/genio`
      `$ rm -rf out/`
    

Flashing the Application

  • Copy the GUI based Flash Tool. from the Linux Host that the example was build to a Windows PC.

    Flash Tool can be found in this source tree under this directory

    third_party/mt793x_sdk/filogic/flash_tool

  • On the Windows PC, run the Flash Tool

    1. Select the scatter.ini file in the ./out/lighting-app directory.
    2. Follow the instruction that comes with EK-AI7931LD KIT to switch the kit to download mode.
    3. Click Download on FLASH TOOL.

Running the Complete Example

Notes

  • Depending on your network settings your router might not provide native ipv6 addresses to your devices (Border router / PC). If this is the case, you need to add a static ipv6 addresses on both device and then an ipv6 route to the border router on your PC