# Copyright (c) 2023 Project CHIP Authors
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# Auto-generated scripts for harness use only, please review before automation. The endpoints and cluster names are currently set to default

name: 263.3.1. [TC-DISHM-2.1] Change to Mode functionality with DUT as Server

PICS:
    - DISHM.S

config:
    nodeId: 0x12344321
    cluster: "Basic Information"
    endpoint: 0

tests:
    - label:
          "Step 1: Commission DUT to TH (can be skipped if done in a preceding
          test)."
      verification: |

      disabled: true

    - label: "Step 2: TH reads from the DUT the SupportedModes attribute."
      PICS: DISHM.S.A0000
      verification: |
          ./chip-tool dishwashermode  read supported-modes 1 1

          Verify that the DUT response contains list of ModeOptionsStruct entries
          - Verify that the list has two or more entries
          - Verify that PIXIT.DISHM.MODE_CHANGE_FAIL is one of supported_modes_dut
          - Save the Mode field values as supported_modes_dut on the TH (Chip-tool) and below is the sample log provided for the raspi platform:

          [1689998005.121163][360287:360289] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0059 Attribute 0x0000_0000 DataVersion: 1994417976
          [1689998005.121241][360287:360289] CHIP:TOO:   SupportedModes: 3 entries
          [1689998005.121250][360287:360289] CHIP:TOO:     [1]: {
          [1689998005.121256][360287:360289] CHIP:TOO:       Label: Normal
          [1689998005.121261][360287:360289] CHIP:TOO:       Mode: 0
          [1689998005.121264][360287:360289] CHIP:TOO:       ModeTags: 1 entries
          [1689998005.121268][360287:360289] CHIP:TOO:         [1]: {
          [1689998005.121270][360287:360289] CHIP:TOO:           Value: 16384
          [1689998005.121272][360287:360289] CHIP:TOO:          }
          [1689998005.121274][360287:360289] CHIP:TOO:      }
          [1689998005.121278][360287:360289] CHIP:TOO:     [2]: {
          [1689998005.121279][360287:360289] CHIP:TOO:       Label: Heavy
          [1689998005.121280][360287:360289] CHIP:TOO:       Mode: 1
          [1689998005.121283][360287:360289] CHIP:TOO:       ModeTags: 2 entries
          [1689998005.121285][360287:360289] CHIP:TOO:         [1]: {
          [1689998005.121287][360287:360289] CHIP:TOO:           Value: 7
          [1689998005.121288][360287:360289] CHIP:TOO:          }
          [1689998005.121291][360287:360289] CHIP:TOO:         [2]: {
          [1689998005.121292][360287:360289] CHIP:TOO:           Value: 16385
          [1689998005.121293][360287:360289] CHIP:TOO:          }
          [1689998005.121295][360287:360289] CHIP:TOO:      }
          [1689998005.121299][360287:360289] CHIP:TOO:     [3]: {
          [1689998005.121300][360287:360289] CHIP:TOO:       Label: Light
          [1689998005.121302][360287:360289] CHIP:TOO:       Mode: 2
          [1689998005.121305][360287:360289] CHIP:TOO:       ModeTags: 3 entries
          [1689998005.121307][360287:360289] CHIP:TOO:         [1]: {
          [1689998005.121309][360287:360289] CHIP:TOO:           Value: 16386
          [1689998005.121310][360287:360289] CHIP:TOO:          }
          [1689998005.121312][360287:360289] CHIP:TOO:         [2]: {
          [1689998005.121314][360287:360289] CHIP:TOO:           Value: 8
          [1689998005.121315][360287:360289] CHIP:TOO:          }
          [1689998005.121317][360287:360289] CHIP:TOO:         [3]: {
          [1689998005.121319][360287:360289] CHIP:TOO:           Value: 2
          [1689998005.121320][360287:360289] CHIP:TOO:          }
          [1689998005.121321][360287:360289] CHIP:TOO:      }
      disabled: true

    - label: "Step 3: TH reads from the DUT the CurrentMode attribute."
      PICS: DISHM.S.A0001
      verification: |
          ./chip-tool dishwashermode read current-mode 1 1

          Verify on TH(chip-tool) logs, CurrentMode attribute value is an integer  value,
          - Save the value as old_current_mode_dut
          - Select a value which is NOT in supported_modes_dut and save it as invalid_mode_th,  below is the sample log provided for the raspi platform, Here CurrentMode attribute value is 0

          [1685018283.726667][16418:16420] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0050 Attribute 0x0000_0003 DataVersion: 3898153349
          [1685018283.726680][16418:16420] CHIP:TOO: CurrentMode: 0
      disabled: true

    - label:
          "Step 4: TH sends a ChangeToMode command to the DUT with NewMode set
          to old_current_mode_dut"
      PICS: DISHM.S.C00.Rsp
      verification: |
          ./chip-tool dishwashermode change-to-mode 0 1 1

          Verify on TH(chip-tool) log, DUT responds contains a ChangeToModeResponse command with a SUCCESS (value 0x00) status response and below is the sample log provided for the raspi platform:

          [1690185977.976163][15730:15732] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0059 Command 0x0000_0001
          [1690185977.976178][15730:15732] CHIP:TOO:   ChangeToModeResponse: {
          [1690185977.976182][15730:15732] CHIP:TOO:     status: 0
          [1690185977.976185][15730:15732] CHIP:TOO:    }
      disabled: true

    - label:
          "Step 5: Manually put the device in a state from which it will FAIL to
          transition to PIXIT.DISHM.MODE_CHANGE_FAIL"
      PICS: DISHM.S.M.CAN_TEST_MODE_FAILURE && DISHM.S.M.CAN_MANUALLY_CONTROLLED
      verification: |
          Manual operation required
      disabled: true

    - label: "Step 6: TH reads from the DUT the CurrentMode attribute."
      PICS: DISHM.S.A0001 && DISHM.S.M.CAN_MANUALLY_CONTROLLED
      verification: |
          ./chip-tool dishwashermode read current-mode 1 1

          Verify on TH(chip-tool) logs, CurrentMode attribute value is an integer  value,
          - Save the value as old_current_mode_dut, below is the sample log provided for the raspi platform, Here CurrentMode attribute value is 0

          [1685018283.726667][16418:16420] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0050 Attribute 0x0000_0003 DataVersion: 3898153349
          [1685018283.726680][16418:16420] CHIP:TOO: CurrentMode: 0
      disabled: true

    - label:
          "Step 7: TH sends a ChangeToMode command to the DUT with NewMode set
          to PIXIT.DISHM.MODE_CHANGE_FAIL"
      PICS: DISHM.S.M.CAN_TEST_MODE_FAILURE && DISHM.S.C00.Rsp
      verification: |
          Note : Please skip this step as SDK is not enabled with this failure response

          ./chip-tool dishwashermode change-to-mode 2 1 1

          Verify on TH(chip-tool) log, DUT responds contains a ChangeToModeResponse command with
          Status field is set to GenericFailure(0x02), InvalidInMode(0x03) , or in the MfgCodes (0x80 to 0xBF) range and StatusText field has a length between 1 and 64,  below is the sample log provided for the raspi platform:

          [1690264785.719168][29854:29856] CHIP:DMG: Received Command Response Data, Endpoint=1 Cluster=0x0000_0059 Command=0x0000_0001
          [1690264785.719200][29854:29856] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0059 Command 0x0000_0001
          [1690264785.719263][29854:29856] CHIP:TOO:   ChangeToModeResponse: {
          [1690264785.719283][29854:29856] CHIP:TOO:     status: 0
          [1690264785.719297][29854:29856] CHIP:TOO:    }
      disabled: true

    - label: "Step 8: TH reads from the DUT the CurrentMode attribute."
      PICS: DISHM.S.A0001
      verification: |
          ./chip-tool dishwashermode read current-mode 1 1

          Verify on TH(chip-tool),  CurrentMode attribute value is an integer value and equal to old_current_mode_dut  below is the sample log provided for the raspi platform, Here CurrentMode attribute value is 0

          [1690186182.071331][15758:15760] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0059 Attribute 0x0000_0001 DataVersion: 74242726
          [1690186182.071346][15758:15760] CHIP:TOO:   CurrentMode: 0
      disabled: true

    - label:
          "Step 9: Manually put the device in a state from which it will
          SUCCESSFULLY transition to PIXIT.DISHM.MODE_CHANGE_OK"
      PICS: DISHM.S.M.CAN_MANUALLY_CONTROLLED
      verification: |
          Manual operation required
      disabled: true

    - label: "Step 10: TH reads from the DUT the CurrentMode attribute."
      PICS: DISHM.S.A0001 && DISHM.S.M.CAN_MANUALLY_CONTROLLED
      verification: |
          ./chip-tool dishwashermode read current-mode 1 1

          Verify on TH(chip-tool) logs, CurrentMode attribute value is an integer  value,
          - Save the value as old_current_mode_dut, below is the sample log provided for the raspi platform, Here CurrentMode attribute value is 0

          [1690186182.071331][15758:15760] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0059 Attribute 0x0000_0001 DataVersion: 74242726
          [1690186182.071346][15758:15760] CHIP:TOO:   CurrentMode: 0
      disabled: true

    - label:
          "Step 11: TH sends a ChangeToMode command to the DUT with NewMode set
          to PIXIT.DISHM.MODE_CHANGE_OK"
      PICS: DISHM.S.C00.Rsp
      verification: |
          ./chip-tool dishwashermode change-to-mode 2 1 1

          Verify on TH(chip-tool) log, DUT responds contains a ChangeToModeResponse command with a SUCCESS (value 0x00) status response and below is the sample log provided for the raspi platform:

          [1690187929.904831][15897:15899] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0059 Command 0x0000_0001
          [1690187929.904845][15897:15899] CHIP:TOO:   ChangeToModeResponse: {
          [1690187929.904852][15897:15899] CHIP:TOO:     status: 0
          [1690187929.904855][15897:15899] CHIP:TOO:    }
      disabled: true

    - label: "Step 12: TH reads from the DUT the CurrentMode attribute."
      PICS: DISHM.S.A0001
      verification: |
          ./chip-tool dishwashermode read current-mode 1 1

          Verify on TH(chip-tool) logs, CurrentMode attribute value is an integer  value and same as step 11,  below is the sample log provided for the raspi platform, Here CurrentMode attribute value is 2

          [1690187960.116433][15901:15903] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0059 Attribute 0x0000_0001 DataVersion: 74242727
          [1690187960.116478][15901:15903] CHIP:TOO:   CurrentMode: 2
      disabled: true

    - label:
          "Step 13: TH sends a ChangeToMode command to the DUT with NewMode set
          to invalid_mode_th"
      PICS: DISHM.S.C00.Rsp
      verification: |
          ./chip-tool dishwashermode change-to-mode 4 1 1

          Verify on TH(chip-tool) log, DUT responds contains a ChangeToModeResponse command with a UnsupportedMode(0x01) status response and below is the sample log provided for the raspi platform:

          [1690188004.105157][15906:15908] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0059 Command 0x0000_0001
          [1690188004.105172][15906:15908] CHIP:TOO:   ChangeToModeResponse: {
          [1690188004.105178][15906:15908] CHIP:TOO:     status: 1
          [1690188004.105181][15906:15908] CHIP:TOO:    }
      disabled: true

    - label: "Step 14: TH reads from the DUT the CurrentMode attribute."
      PICS: DISHM.S.A0001
      verification: |
          ./chip-tool dishwashermode read current-mode 1 1

          Verify on TH(chip-tool) logs, CurrentMode attribute value is an integer  value and same as step 12,  below is the sample log provided for the raspi platform, Here CurrentMode attribute value is 2

          [1690187960.116433][15901:15903] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0059 Attribute 0x0000_0001 DataVersion: 74242727
          [1690187960.116478][15901:15903] CHIP:TOO:   CurrentMode: 2
      disabled: true