# Copyright (c) 2023 Project CHIP Authors
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

name:
    131.2.4. [TC-G-2.4] Commands - AddGroup Command with same GroupID on
    Multiple Endpoint [DUT-Server]

PICS:
    - G.S
    - MCORE.G.MULTIENDPOINT

config:
    nodeId: 0x12344321
    cluster: "Groups"
    endpoint: 0

    # Users should set endpoint value on the command line to PIXIT.G.ENDPOINT1
    Groups.Endpoint1: 1

    # Users should set endpoint value on the command line to PIXIT.G.ENDPOINT2
    Groups.Endpoint2: 2

tests:
    - label:
          "Step 1: Commission DUT to TH (can be skipped if done in a preceding
          test)."
      cluster: "DelayCommands"
      command: "WaitForCommissionee"
      arguments:
          values:
              - name: "nodeId"
                value: nodeId

    - label:
          "Step 1: Verify that PIXIT.G.ENDPOINT and PIXIT.G.ENDPOINT2 are
          different."
      cluster: "EqualityCommands"
      command: "UnsignedNumberEquals"
      arguments:
          values:
              - name: "Value1"
                value: Groups.Endpoint1
              - name: "Value2"
                value: Groups.Endpoint2
      response:
          - values:
                - name: "Equals"
                  value: false

    - label:
          "Step 2: TH sends KeySetWrite command in the GroupKeyManagement
          cluster to DUT on EP0 using a key that is pre-installed on the TH.
          GroupKeySet fields are as follows: 1)GroupKeySetID: 1
          2)GroupKeySecurityPolicy: TrustFirst (0) 3)EpochKey0:
          d0d1d2d3d4d5d6d7d8d9dadbdcdddedf 4)EpochStartTime0: 1 5)EpochKey1:
          d1d1d2d3d4d5d6d7d8d9dadbdcdddedf 6)EpochStartTime1:
          18446744073709551613 7)EpochKey2: d2d1d2d3d4d5d6d7d8d9dadbdcdddedf
          8)EpochStartTime2: 18446744073709551614"
      PICS: GRPKEY.S.C00.Rsp
      cluster: "Group Key Management"
      command: "KeySetWrite"
      arguments:
          values:
              - name: GroupKeySet
                value:
                    {
                        GroupKeySetID: 1,
                        GroupKeySecurityPolicy: 0,
                        EpochKey0: "hex:d0d1d2d3d4d5d6d7d8d9dadbdcdddedf",
                        EpochStartTime0: 1,
                        EpochKey1: "hex:d1d1d2d3d4d5d6d7d8d9dadbdcdddedf",
                        EpochStartTime1: 18446744073709551613,
                        EpochKey2: "hex:d2d1d2d3d4d5d6d7d8d9dadbdcdddedf",
                        EpochStartTime2: 18446744073709551614,
                    }

    - label:
          "Step 3: TH writes the GroupKeyMap attribute in the GroupKeyManagement
          cluster on EP0 with one entry binding GroupId(0x0001) with
          GroupKeySetID 1"
      PICS: GRPKEY.S.A0000
      cluster: "Group Key Management"
      command: "writeAttribute"
      attribute: "GroupKeyMap"
      arguments:
          value: [{ FabricIndex: 1, GroupId: 0x0001, GroupKeySetID: 1 }]

    - label:
          "Step 4a: TH cleans up the groups by sending the RemoveAllGroups
          command to the DUT on PIXIT.G.ENDPOINT1"
      endpoint: Groups.Endpoint1
      command: "RemoveAllGroups"

    - label:
          "Step 4b: TH cleans up the groups by sending the RemoveAllGroups
          command to the DUT on PIXIT.G.ENDPOINT2"
      endpoint: Groups.Endpoint2
      command: "RemoveAllGroups"

    - label:
          "Step 5a: TH sends AddGroup command to DUT on PIXIT.G.ENDPOINT with
          the following fields:1) GroupID as 0x0001, 2)GroupName as 'Gp1'"
      PICS: G.S.C00.Rsp && G.S.C00.Tx
      endpoint: Groups.Endpoint1
      command: "AddGroup"
      arguments:
          values:
              - name: GroupID
                value: 0x0001
              - name: GroupName
                value: "Gp1"
      response:
          values:
              - name: "Status"
                value: 0x00
              - name: "GroupID"
                value: 0x0001

    - label:
          "Step 5b: TH sends AddGroup command to DUT on PIXIT.G.ENDPOINT2 with
          the following fields: GroupID as 0x0001,GroupName as 'Gp2'"
      PICS: G.S.C00.Rsp && G.S.C00.Tx
      endpoint: Groups.Endpoint2
      command: "AddGroup"
      arguments:
          values:
              - name: GroupID
                value: 0x0001
              - name: GroupName
                value: "Gp2"
      response:
          values:
              - name: "Status"
                value: 0x00
              - name: "GroupID"
                value: 0x0001

    - label:
          "Step 6: TH reads GroupTable attribute from the GroupKeyManagement
          cluster from DUT on EP0"
      PICS: GRPKEY.S.A0001
      cluster: "Group Key Management"
      command: "readAttribute"
      attribute: "GroupTable"
      response:
          value:
              [
                  {
                      FabricIndex: 1,
                      GroupId: 0x0001,
                      Endpoints: [Groups.Endpoint1, Groups.Endpoint2],
                  },
              ]

    - label:
          "Step 7: TH reads GroupTable attribute from the GroupKeyManagement
          cluster from DUT on EP0, Verify that the GroupTable contains an entry
          with the GroupName as 'Gp2'"
      PICS: GRPKEY.S.A0001 && G.S.F00
      cluster: "Group Key Management"
      command: "readAttribute"
      attribute: "GroupTable"
      response:
          value:
              [
                  {
                      FabricIndex: 1,
                      GroupId: 0x0001,
                      Endpoints: [Groups.Endpoint1, Groups.Endpoint2],
                      GroupName: "Gp2",
                  },
              ]

    - label:
          "Step 8: TH sends ViewGroup command to DUT on PIXIT.G.ENDPOINT with
          the following fields: GroupID as 0x0001"
      PICS: G.S.C01.Rsp && G.S.C01.Tx
      endpoint: Groups.Endpoint1
      command: "ViewGroup"
      arguments:
          values:
              - name: GroupID
                value: 0x0001
      response:
          values:
              - name: Status
                value: 0x00
              - name: GroupID
                value: 0x0001

    - label:
          "Step 9: TH sends ViewGroup command to DUT on PIXIT.G.ENDPOINT with
          the following fields: GroupID as 0x0001. Verify that the
          ViewGroupResponse contains GroupName as 'GP2'"
      PICS: G.S.C01.Rsp && G.S.C01.Tx && G.S.F00
      endpoint: Groups.Endpoint1
      command: "ViewGroup"
      arguments:
          values:
              - name: GroupID
                value: 0x0001
      response:
          values:
              - name: Status
                value: 0x00
              - name: GroupID
                value: 0x0001
              - name: GroupName
                value: "Gp2"

    - label:
          "Step 10: TH sends RemoveGroup command to DUT on PIXIT.G.ENDPOINT as
          unicast with the following field: GroupID as 0x0001"
      PICS: G.S.C03.Rsp && G.S.C03.Tx
      endpoint: Groups.Endpoint1
      command: "RemoveGroup"
      arguments:
          values:
              - name: "GroupID"
                value: 0x0001
      response:
          values:
              - name: "Status"
                value: 0x00
              - name: "GroupID"
                value: 0x0001

    - label:
          "Step 11: TH reads GroupTable attribute from the GroupKeyManagement
          cluster from DUT on EP0"
      PICS: GRPKEY.S.A0001 && !G.S.F00
      cluster: "Group Key Management"
      command: "readAttribute"
      attribute: "GroupTable"
      response:
          value:
              [
                  {
                      FabricIndex: 1,
                      GroupId: 0x0001,
                      Endpoints: [Groups.Endpoint2],
                      GroupName: "",
                  },
              ]

    - label:
          "Step 11: TH reads GroupTable attribute from the GroupKeyManagement
          cluster from DUT on EP0"
      PICS: GRPKEY.S.A0001 && G.S.F00
      cluster: "Group Key Management"
      command: "readAttribute"
      attribute: "GroupTable"
      response:
          value:
              [
                  {
                      FabricIndex: 1,
                      GroupId: 0x0001,
                      Endpoints: [Groups.Endpoint2],
                      GroupName: "Gp2",
                  },
              ]

    - label:
          "Step 12: TH sends RemoveGroup command to DUT on PIXIT.G.ENDPOINT2 as
          unicast with the following field: GroupID as 0x0001"
      PICS: G.S.C03.Rsp && G.S.C03.Tx
      endpoint: Groups.Endpoint2
      command: "RemoveGroup"
      arguments:
          values:
              - name: "GroupID"
                value: 0x0001
      response:
          values:
              - name: "Status"
                value: 0x00
              - name: "GroupID"
                value: 0x0001

    - label:
          "Step 13: TH reads GroupTable attribute from the GroupKeyManagement
          cluster from DUT on EP0"
      PICS: GRPKEY.S.A0001
      cluster: "Group Key Management"
      command: "readAttribute"
      attribute: "GroupTable"
      response:
          value: []