# Copyright (c) 2021 Project CHIP Authors
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

name: 57.2.3. [TC-I-2.3] Secondary functionality with server as DUT

PICS:
    - I.S
    - I.S.C40.Rsp

config:
    nodeId: 0x12344321
    cluster: "Identify"
    endpoint: 1

tests:
    - label:
          "Step 1: Commission DUT to TH (can be skipped if done in a preceding
          test)."
      cluster: "DelayCommands"
      command: "WaitForCommissionee"
      arguments:
          values:
              - name: "nodeId"
                value: nodeId

    - label:
          "Step 2a: TH sends TriggerEffect command to DUT, with the effect
          identifier field set to 0x00 (blink) and the effect variant field set
          to 0x00 (default)"
      PICS: I.S.C40.Rsp
      command: "TriggerEffect"
      arguments:
          values:
              - name: "EffectIdentifier"
                value: 0
              - name: "EffectVariant"
                value: 0

    - label: "DUT executes a blink effect"
      cluster: "LogCommands"
      command: "UserPrompt"
      PICS: PICS_USER_PROMPT && I.S.C40.Rsp
      arguments:
          values:
              - name: "message"
                value: "Please enter 'y' for success"
              - name: "expectedValue"
                value: "y"

    - label:
          "Step 2b: TH sends TriggerEffect command to DUT, with the effect
          identifier field set to 0x01 (breathe) and the effect variant field
          set to 0x00 (default)."
      PICS: I.S.C40.Rsp
      command: "TriggerEffect"
      arguments:
          values:
              - name: "EffectIdentifier"
                value: 1
              - name: "EffectVariant"
                value: 0

    - label: "DUT executes a breathe effect"
      cluster: "LogCommands"
      command: "UserPrompt"
      PICS: PICS_USER_PROMPT && I.S.C40.Rsp
      arguments:
          values:
              - name: "message"
                value: "Please enter 'y' for success"
              - name: "expectedValue"
                value: "y"

    - label:
          "Step 2c: TH sends TriggerEffect command to DUT, with the effect
          identifier field set to 0x02 (okay) and the effect variant field set
          to 0x00 (default)."
      PICS: I.S.C40.Rsp
      command: "TriggerEffect"
      arguments:
          values:
              - name: "EffectIdentifier"
                value: 2
              - name: "EffectVariant"
                value: 0

    - label: "DUT executes an okay effect"
      cluster: "LogCommands"
      command: "UserPrompt"
      PICS: PICS_USER_PROMPT && I.S.C40.Rsp
      arguments:
          values:
              - name: "message"
                value: "Please enter 'y' for success"
              - name: "expectedValue"
                value: "y"

    - label:
          "Step 2d:TH sends TriggerEffect command to DUT, with the effect
          identifier field set to 0x0b (channel change) and the effect variant
          field set to 0x00 (default)."
      PICS: I.S.C40.Rsp
      command: "TriggerEffect"
      arguments:
          values:
              - name: "EffectIdentifier"
                value: 11
              - name: "EffectVariant"
                value: 0

    - label: "DUT executes a channel change effect"
      cluster: "LogCommands"
      command: "UserPrompt"
      PICS: PICS_USER_PROMPT && I.S.C40.Rsp
      arguments:
          values:
              - name: "message"
                value: "Please enter 'y' for success"
              - name: "expectedValue"
                value: "y"

    - label:
          "Step 2e: TH sends TriggerEffect command to DUT, with the effect
          identifier field set to 0x01 (breathe) and the effect variant field
          set to 0x00 (default)."
      PICS: I.S.C40.Rsp
      command: "TriggerEffect"
      arguments:
          values:
              - name: "EffectIdentifier"
                value: 1
              - name: "EffectVariant"
                value: 0

    - label: "DUT executes a breathe effect"
      cluster: "LogCommands"
      command: "UserPrompt"
      PICS: PICS_USER_PROMPT && I.S.C40.Rsp
      arguments:
          values:
              - name: "message"
                value: "Please enter 'y' for success"
              - name: "expectedValue"
                value: "y"

    - label:
          "Step 2f: TH sends TriggerEffect command to DUT, with the effect
          identifier field set to 0xfe (finish effect) and the effect variant
          field set to 0x00 (default)."
      PICS: I.S.C40.Rsp
      command: "TriggerEffect"
      arguments:
          values:
              - name: "EffectIdentifier"
                value: 254
              - name: "EffectVariant"
                value: 0

    - label: "DUT stops the breathe effect after the current effect sequence"
      cluster: "LogCommands"
      command: "UserPrompt"
      PICS: PICS_USER_PROMPT && I.S.C40.Rsp
      arguments:
          values:
              - name: "message"
                value: "Please enter 'y' for success"
              - name: "expectedValue"
                value: "y"

    - label:
          "Step 2g: TH sends TriggerEffect command to DUT, with the effect
          identifier field set to 0x01 (breathe) and the effect variant field
          set to 0x00 (default)."
      PICS: I.S.C40.Rsp
      command: "TriggerEffect"
      arguments:
          values:
              - name: "EffectIdentifier"
                value: 1
              - name: "EffectVariant"
                value: 0

    - label: "DUT executes a breathe effect"
      cluster: "LogCommands"
      command: "UserPrompt"
      PICS: PICS_USER_PROMPT && I.S.C40.Rsp
      arguments:
          values:
              - name: "message"
                value: "Please enter 'y' for success"
              - name: "expectedValue"
                value: "y"

    - label:
          "Step 2h: TH sends TriggerEffect command to DUT, with the effect
          identifier field set to 0xff (stop effect) and the effect variant
          field set to 0x00 (default)."
      PICS: I.S.C40.Rsp
      command: "TriggerEffect"
      arguments:
          values:
              - name: "EffectIdentifier"
                value: 255
              - name: "EffectVariant"
                value: 0

    - label: "DUT stops the breathe effect as soon as possible."
      cluster: "LogCommands"
      command: "UserPrompt"
      PICS: PICS_USER_PROMPT && I.S.C40.Rsp
      arguments:
          values:
              - name: "message"
                value: "Please enter 'y' for success"
              - name: "expectedValue"
                value: "y"

    - label:
          "Step 3a: TH sends TriggerEffect command to DUT, with the effect
          identifier field set to 0x00 (blink) and the effect variant field set
          to 0x42 (unknown)."
      PICS: I.S.C40.Rsp
      command: "TriggerEffect"
      arguments:
          values:
              - name: "EffectIdentifier"
                value: 0
              - name: "EffectVariant"
                value: EffectVariantEnum.UnknownEnumValue(66)

    - label: "Check DUT executes a blink effect."
      cluster: "LogCommands"
      command: "UserPrompt"
      PICS: PICS_USER_PROMPT && I.S.C40.Rsp
      arguments:
          values:
              - name: "message"
                value: "Please enter 'y' for success"
              - name: "expectedValue"
                value: "y"

    - label:
          "Step 3b: TH sends TriggerEffect command to DUT, with the effect
          identifier field set to 0xff (stop effect) and the effect variant
          field set to 0x00 (default)."
      PICS: I.S.C40.Rsp
      command: "TriggerEffect"
      arguments:
          values:
              - name: "EffectIdentifier"
                value: 255
              - name: "EffectVariant"
                value: 0

    - label:
          "DUT stops any effect that may be still running as soon as possible"
      cluster: "LogCommands"
      command: "UserPrompt"
      PICS: PICS_USER_PROMPT && I.S.C40.Rsp
      arguments:
          values:
              - name: "message"
                value: "Please enter 'y' for success"
              - name: "expectedValue"
                value: "y"