# Copyright (c) 2023 Project CHIP Authors
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

name: 133.1.1. [TC-TIMESYNC-1.1] Global attributes with server as DUT

PICS:
    - TIMESYNC.S

config:
    nodeId: 0x12344321
    cluster: "Time Synchronization"
    endpoint: 0

tests:
    - label:
          "Step 1: Commission DUT to TH (can be skipped if done in a preceding
          test)."
      cluster: "DelayCommands"
      command: "WaitForCommissionee"
      arguments:
          values:
              - name: "nodeId"
                value: nodeId

    ##########################
    # TS 2: Cluster revision
    ##########################
    - label: "Step 2: TH reads from the DUT the ClusterRevision attribute."
      command: "readAttribute"
      attribute: "ClusterRevision"
      response:
          value: 2

    ##########################
    # TS 3: Feature map
    ##########################
    # TZ
    - label: "Step 3: TH reads from the DUT the FeatureMap attribute."
      PICS: TIMESYNC.S.F00
      command: "readAttribute"
      attribute: "FeatureMap"
      response:
          constraints:
              type: bitmap32
              hasMasksSet: [0x1]

    - label:
          "Step 3b: Given !TIMESYNC.S.F00(TZ) ensure featuremap has the correct
          bit clear"
      PICS: "!TIMESYNC.S.F00"
      command: "readAttribute"
      attribute: "FeatureMap"
      response:
          constraints:
              type: bitmap32
              hasMasksClear: [0x1]
    # NTPC
    - label:
          "Step 3c: Given TIMESYNC.S.F01(NTPC) ensure featuremap has the correct
          bit set"
      PICS: TIMESYNC.S.F01
      command: "readAttribute"
      attribute: "FeatureMap"
      response:
          constraints:
              type: bitmap32
              hasMasksSet: [0x2]

    - label:
          "Step 3d: Given !TIMESYNC.S.F01(NTPC) ensure featuremap has the
          correct bit clear"
      PICS: "!TIMESYNC.S.F01"
      command: "readAttribute"
      attribute: "FeatureMap"
      response:
          constraints:
              type: bitmap32
              hasMasksClear: [0x2]

    # NTPS
    - label:
          "Step 3e: Given TIMESYNC.S.F02(NTPS) ensure featuremap has the correct
          bit set"
      PICS: TIMESYNC.S.F02
      command: "readAttribute"
      attribute: "FeatureMap"
      response:
          constraints:
              type: bitmap32
              hasMasksSet: [0x4]

    - label:
          "Step 3f: Given !TIMESYNC.S.F02(NTPS) ensure featuremap has the
          correct bit clear"
      PICS: "!TIMESYNC.S.F02"
      command: "readAttribute"
      attribute: "FeatureMap"
      response:
          constraints:
              type: bitmap32
              hasMasksClear: [0x4]

    # TSC
    - label:
          "Step 3g: Given TIMESYNC.S.F03(TSC) ensure featuremap has the correct
          bit set"
      PICS: TIMESYNC.S.F03
      command: "readAttribute"
      attribute: "FeatureMap"
      response:
          constraints:
              type: bitmap32
              hasMasksSet: [0x8]

    - label:
          "Step 3h: Given !TIMESYNC.S.F03(TSC) ensure featuremap has the correct
          bit clear"
      PICS: "!TIMESYNC.S.F03"
      command: "readAttribute"
      attribute: "FeatureMap"
      response:
          constraints:
              type: bitmap32
              hasMasksClear: [0x8]

    ##########################
    # TS 3: Feature map
    ##########################
    # Mandatory entries
    - label: "Step 4a: TH reads from the DUT the AttributeList attribute."
      PICS: PICS_EVENT_LIST_ENABLED
      command: "readAttribute"
      attribute: "AttributeList"
      response:
          constraints:
              contains:
                  [
                      0x0000,
                      0x0001,
                      0xFFF8,
                      0xFFF9,
                      0xFFFA,
                      0xFFFB,
                      0xFFFC,
                      0xFFFD,
                  ]

    - label: "Step 4b: TH reads from the DUT the AttributeList attribute."
      PICS: "!PICS_EVENT_LIST_ENABLED"
      command: "readAttribute"
      attribute: "AttributeList"
      response:
          constraints:
              contains: [0x0000, 0x0001, 0xFFF8, 0xFFF9, 0xFFFB, 0xFFFC, 0xFFFD]

    # Optional
    - label: "Step 4c: Check for optional attribute TimeSource in AttributeList"
      PICS: TIMESYNC.S.A0002
      command: "readAttribute"
      attribute: "AttributeList"
      response:
          constraints:
              contains: [0x0002]

    - label:
          "Step 4d: Check for optional attribute TimeSource not in AttributeList"
      PICS: "!TIMESYNC.S.A0002"
      command: "readAttribute"
      attribute: "AttributeList"
      response:
          constraints:
              excludes: [0x0002]

    # Feature TZ
    - label: "Step 4e: Check for TZ feature-based attributes in AttributeList"
      PICS: TIMESYNC.S.F00
      command: "readAttribute"
      attribute: "AttributeList"
      response:
          constraints:
              contains: [0x0005, 0x0006, 0x0007, 0x0008, 0x000A, 0x000B]

    - label:
          "Step 4f: Check for TZ feature-based attributes not in AttributeList"
      PICS: "!TIMESYNC.S.F00"
      command: "readAttribute"
      attribute: "AttributeList"
      response:
          constraints:
              excludes: [0x0005, 0x0006, 0x0007, 0x0008, 0x000A, 0x000B]

    # Feature NTPC
    - label: "Step 4g: Check for NTPC feature-based attributes in AttributeList"
      PICS: TIMESYNC.S.F01
      command: "readAttribute"
      attribute: "AttributeList"
      response:
          constraints:
              contains: [0x0004, 0x000C]

    - label:
          "Step 4h: Check for NTPC feature-based attributes not in AttributeList"
      PICS: "!TIMESYNC.S.F01"
      command: "readAttribute"
      attribute: "AttributeList"
      response:
          constraints:
              excludes: [0x0004, 0x000C]

    # Feature NTPS
    - label: "Step 4i: Check for NTPS feature-based attributes in AttributeList"
      PICS: TIMESYNC.S.F02
      command: "readAttribute"
      attribute: "AttributeList"
      response:
          constraints:
              contains: [0x0009]

    - label:
          "Step 4j: Check for NTPS feature-based attributes not in AttributeList"
      PICS: "!TIMESYNC.S.F02"
      command: "readAttribute"
      attribute: "AttributeList"
      response:
          constraints:
              excludes: [0x0009]

    # Feature TSC
    - label: "Step 4k: Check for TSC feature-based attributes in AttributeList"
      PICS: TIMESYNC.S.F03
      command: "readAttribute"
      attribute: "AttributeList"
      response:
          constraints:
              contains: [0x0003]

    - label:
          "Step 4l: Check for TSC feature-based attributes not in AttributeList"
      PICS: "!TIMESYNC.S.F03"
      command: "readAttribute"
      attribute: "AttributeList"
      response:
          constraints:
              excludes: [0x0003]

    # Note - additional exclusions not handled here

    ##########################
    # TS 5: Event list - NOTE: disabled
    ##########################
    # mandatory
    - label: "Step 5a: TH reads from the DUT the EventList attribute."
      PICS: PICS_EVENT_LIST_ENABLED
      command: "readAttribute"
      attribute: "EventList"
      response:
          constraints:
              contains: [0x03]

    #Feature TZ
    - label: "Step 5b: Check for TZ feature-based events in EventList"
      PICS: PICS_EVENT_LIST_ENABLED && TIMESYNC.S.F00
      command: "readAttribute"
      attribute: "EventList"
      response:
          constraints:
              contains: [0x00, 0x01, 0x02]

    - label: "Step 5c: Check for TZ feature-based events not in EventList"
      PICS: "PICS_EVENT_LIST_ENABLED && !TIMESYNC.S.F00"
      command: "readAttribute"
      attribute: "EventList"
      response:
          constraints:
              excludes: [0x00, 0x01, 0x02]

    #Feature TSC
    - label: "Step 5d: Check for TSC feature-based events in EventList"
      PICS: PICS_EVENT_LIST_ENABLED && TIMESYNC.S.F03
      command: "readAttribute"
      attribute: "EventList"
      response:
          constraints:
              contains: [0x04]

    - label: "Step 5e: Check for TSC feature-based events not in EventList"
      PICS: "PICS_EVENT_LIST_ENABLED && !TIMESYNC.S.F03"
      command: "readAttribute"
      attribute: "EventList"
      response:
          constraints:
              excludes: [0x04]

    # Note - additional exclusions not handled here

    ##########################
    # TS 6: AcceptedCommandList
    ##########################
    # mandatory
    - label: "Step 6a: TH reads from the DUT the AcceptedCommandList attribute."
      command: "readAttribute"
      attribute: "AcceptedCommandList"
      response:
          constraints:
              contains: [0x00]

    # Feature TZ
    - label:
          "Step 6b: Check for TZ feature-based commands in AcceptedCommandList"
      PICS: TIMESYNC.S.F00
      command: "readAttribute"
      attribute: "AcceptedCommandList"
      response:
          constraints:
              contains: [0x02, 0x04]

    - label:
          "Step 6c: Check for TZ feature-based commands in not
          AcceptedCommandList"
      PICS: "!TIMESYNC.S.F00"
      command: "readAttribute"
      attribute: "AcceptedCommandList"
      response:
          constraints:
              excludes: [0x02, 0x04]

    # Feature NTPC
    - label:
          "Step 6d: Check for NTPC feature-based commands in AcceptedCommandList"
      PICS: TIMESYNC.S.F01
      command: "readAttribute"
      attribute: "AcceptedCommandList"
      response:
          constraints:
              contains: [0x05]

    - label:
          "Step 6e: Check for NTPC feature-based commands in not
          AcceptedCommandList"
      PICS: "!TIMESYNC.S.F01"
      command: "readAttribute"
      attribute: "AcceptedCommandList"
      response:
          constraints:
              excludes: [0x05]

    # Feature TSC
    - label:
          "Step 6f: Check for TSC feature-based commands in AcceptedCommandList"
      PICS: TIMESYNC.S.F03
      command: "readAttribute"
      attribute: "AcceptedCommandList"
      response:
          constraints:
              contains: [0x01]

    - label:
          "Step 6g: Check for TSC feature-based commands in not
          AcceptedCommandList"
      PICS: "!TIMESYNC.S.F03"
      command: "readAttribute"
      attribute: "AcceptedCommandList"
      response:
          constraints:
              excludes: [0x01]

    # NOTE: exclusions not checked

    ##########################
    # TS 7: GeneratedCommandList
    ##########################
    # Feature TZ
    - label: "Step 7a: TH reads from the DUT the GeneratedCommandList attribute"
      PICS: TIMESYNC.S.F00
      command: "readAttribute"
      attribute: "GeneratedCommandList"
      response:
          constraints:
              contains: [0x03]

    - label:
          "Step 7b: Check for TZ feature-based commands in not
          GeneratedCommandList"
      PICS: "!TIMESYNC.S.F00"
      command: "readAttribute"
      attribute: "GeneratedCommandList"
      response:
          constraints:
              excludes: [0x03]