| # Copyright (c) 2023 Project CHIP Authors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| name: |
| 4.2.4. [TC-SMOKECO-2.4] Secondary Functionality - Mandatory with DUT as |
| Server |
| |
| PICS: |
| - SMOKECO.S |
| |
| config: |
| nodeId: 0x12344321 |
| cluster: "Smoke CO Alarm" |
| endpoint: 1 |
| timeout: 2910 |
| TEST_EVENT_TRIGGER_KEY: |
| type: octet_string |
| defaultValue: "hex:00112233445566778899aabbccddeeff" |
| TEST_EVENT_TRIGGER_WARNING_BATTERY_ALERT: |
| type: int64u |
| defaultValue: "0xffffffff00000095" |
| TEST_EVENT_TRIGGER_CRITICAL_BATTERY_ALERT: |
| type: int64u |
| defaultValue: "0xffffffff0000009e" |
| TEST_EVENT_TRIGGER_BATTERY_ALERT_CLEAR: |
| type: int64u |
| defaultValue: "0xffffffff000000a5" |
| TEST_EVENT_TRIGGER_HARDWARE_FAULT_ALERT: |
| type: int64u |
| defaultValue: "0xffffffff00000093" |
| TEST_EVENT_TRIGGER_HARDWARE_FAULT_ALERT_CLEAR: |
| type: int64u |
| defaultValue: "0xffffffff000000a3" |
| TEST_EVENT_TRIGGER_END_OF_SERVICE_ALERT: |
| type: int64u |
| defaultValue: "0xffffffff0000009a" |
| TEST_EVENT_TRIGGER_END_OF_SERVICE_ALERT_CLEAR: |
| type: int64u |
| defaultValue: "0xffffffff000000aa" |
| |
| tests: |
| - label: "Step 1: Commission DUT to TH" |
| cluster: "DelayCommands" |
| command: "WaitForCommissionee" |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId |
| |
| - label: "Step 2: TH subscribes to BatteryAlert attribute from DUT" |
| PICS: SMOKECO.S.A0003 |
| command: "subscribeAttribute" |
| attribute: "BatteryAlert" |
| minInterval: 1 |
| maxInterval: 900 |
| response: |
| value: 0 |
| constraints: |
| type: enum8 |
| |
| - label: "Step 3: TH reads ExpressedState attribute from DUT" |
| PICS: SMOKECO.S.A0000 |
| command: "readAttribute" |
| attribute: "ExpressedState" |
| response: |
| value: 0 |
| constraints: |
| type: enum8 |
| |
| - label: "TH gets last event number from DUT" |
| PICS: SMOKECO.S.E0a |
| command: "readEvent" |
| event: "AllClear" |
| |
| - label: |
| "Step 4: TH reads TestEventTriggersEnabled attribute from General |
| Diagnostics Cluster" |
| PICS: DGGEN.S.A0008 |
| cluster: "General Diagnostics" |
| endpoint: 0 |
| command: "readAttribute" |
| attribute: "TestEventTriggersEnabled" |
| response: |
| value: 1 |
| |
| - label: |
| "Step 5: TH sends TestEventTrigger command to General Diagnostics |
| Cluster on Endpoint 0 with EnableKey field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER_KEY and EventTrigger field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER for Warning Battery Alert Test Event" |
| PICS: DGGEN.S.C00.Rsp |
| cluster: "General Diagnostics" |
| endpoint: 0 |
| command: "TestEventTrigger" |
| arguments: |
| values: |
| - name: "EnableKey" |
| value: TEST_EVENT_TRIGGER_KEY |
| - name: "EventTrigger" |
| value: TEST_EVENT_TRIGGER_WARNING_BATTERY_ALERT |
| |
| - label: |
| "Step 6: TH waits for a report of BatteryAlert attribute from DUT with |
| a timeout of 300 seconds" |
| PICS: PICS_SKIP_SAMPLE_APP && SMOKECO.S.A0003 |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| verification: | |
| ./chip-tool smokecoalarm read battery-alert 1 1 |
| |
| [TOO] Endpoint: 1 Cluster: 0x0000_005C Attribute 0x0000_0003 DataVersion: 1795725838 |
| [TOO] BatteryAlert: 1 |
| [1692340991.009882][1860:1862] CHIP:EM: <<< [E:56796i S:13603 M:58223585 (Ack:16238538)] (S) Msg TX to 1:0000000000000001 [3304] --- Type 0000:10 (SecureChannel:StandaloneAck) |
| arguments: |
| values: |
| - name: "message" |
| value: "Enter 'y' after success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: "Step 7: TH reads ExpressedState attribute from DUT" |
| PICS: SMOKECO.S.A0000 |
| command: "readAttribute" |
| attribute: "ExpressedState" |
| response: |
| value: 3 |
| constraints: |
| type: enum8 |
| |
| - label: "Step 8: TH reads LowBattery event from DUT" |
| PICS: SMOKECO.S.E02 |
| command: "readEvent" |
| event: "LowBattery" |
| eventNumber: "LastReceivedEventNumber + 1" |
| response: |
| value: { AlarmSeverityLevel: 1 } |
| |
| - label: |
| "Step 9: TH sends TestEventTrigger command to General Diagnostics |
| Cluster on Endpoint 0 with EnableKey field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER_KEY and EventTrigger field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER for Critical Battery Alert Test Event" |
| PICS: DGGEN.S.C00.Rsp |
| cluster: "General Diagnostics" |
| endpoint: 0 |
| command: "TestEventTrigger" |
| arguments: |
| values: |
| - name: "EnableKey" |
| value: TEST_EVENT_TRIGGER_KEY |
| - name: "EventTrigger" |
| value: TEST_EVENT_TRIGGER_CRITICAL_BATTERY_ALERT |
| |
| - label: |
| "Step 10: TH waits for a report of BatteryAlert attribute from DUT |
| with a timeout of 300 seconds" |
| PICS: PICS_SKIP_SAMPLE_APP && SMOKECO.S.A0003 |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| verification: | |
| ./chip-tool smokecoalarm read battery-alert 1 1 |
| |
| [TOO] Endpoint: 1 Cluster: 0x0000_005C Attribute 0x0000_0003 DataVersion: 1795725838 |
| [TOO] BatteryAlert: 2 |
| [1692340991.009882][1860:1862] CHIP:EM: <<< [E:56796i S:13603 M:58223585 (Ack:16238538)] (S) Msg TX to 1:0000000000000001 [3304] --- Type 0000:10 (SecureChannel:StandaloneAck) |
| arguments: |
| values: |
| - name: "message" |
| value: "Enter 'y' after success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: "Step 11: TH reads ExpressedState attribute from DUT" |
| PICS: SMOKECO.S.A0000 |
| command: "readAttribute" |
| attribute: "ExpressedState" |
| response: |
| value: 3 |
| constraints: |
| type: enum8 |
| |
| - label: "Step 12: TH reads LowBattery event from DUT" |
| PICS: SMOKECO.S.E02 |
| command: "readEvent" |
| event: "LowBattery" |
| eventNumber: "LastReceivedEventNumber + 1" |
| response: |
| value: { AlarmSeverityLevel: 2 } |
| |
| - label: |
| "Step 13: TH sends TestEventTrigger command to General Diagnostics |
| Cluster on Endpoint 0 with EnableKey field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER_KEY and EventTrigger field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER for Battery Alert Test Event Clear" |
| PICS: DGGEN.S.C00.Rsp |
| cluster: "General Diagnostics" |
| endpoint: 0 |
| command: "TestEventTrigger" |
| arguments: |
| values: |
| - name: "EnableKey" |
| value: TEST_EVENT_TRIGGER_KEY |
| - name: "EventTrigger" |
| value: TEST_EVENT_TRIGGER_BATTERY_ALERT_CLEAR |
| |
| - label: |
| "Step 14: TH waits for a report of BatteryAlert attribute from DUT |
| with a timeout of 300 seconds" |
| PICS: PICS_SKIP_SAMPLE_APP && SMOKECO.S.A0003 |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| verification: | |
| ./chip-tool smokecoalarm read battery-alert 1 1 |
| |
| [TOO] Endpoint: 1 Cluster: 0x0000_005C Attribute 0x0000_0003 DataVersion: 1795725838 |
| [TOO] BatteryAlert: 0 |
| [1692340991.009882][1860:1862] CHIP:EM: <<< [E:56796i S:13603 M:58223585 (Ack:16238538)] (S) Msg TX to 1:0000000000000001 [3304] --- Type 0000:10 (SecureChannel:StandaloneAck) |
| arguments: |
| values: |
| - name: "message" |
| value: "Enter 'y' after success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: "Step 15: TH reads ExpressedState attribute from DUT" |
| PICS: SMOKECO.S.A0000 |
| command: "readAttribute" |
| attribute: "ExpressedState" |
| response: |
| value: 0 |
| constraints: |
| type: enum8 |
| |
| - label: "Step 16: TH reads AllClear event from DUT" |
| PICS: SMOKECO.S.E0a |
| command: "readEvent" |
| event: "AllClear" |
| eventNumber: "LastReceivedEventNumber + 1" |
| response: |
| value: {} |
| |
| - label: "Step 17: TH subscribes to HardwareFaultAlert attribute from DUT" |
| PICS: SMOKECO.S.A0006 |
| command: "subscribeAttribute" |
| attribute: "HardwareFaultAlert" |
| minInterval: 1 |
| maxInterval: 900 |
| response: |
| value: 0 |
| constraints: |
| type: boolean |
| |
| - label: |
| "Step 18: TH sends TestEventTrigger command to General Diagnostics |
| Cluster on Endpoint 0 with EnableKey field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER_KEY and EventTrigger field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER for Hardware Fault Alert Test Event" |
| PICS: DGGEN.S.C00.Rsp |
| cluster: "General Diagnostics" |
| endpoint: 0 |
| command: "TestEventTrigger" |
| arguments: |
| values: |
| - name: "EnableKey" |
| value: TEST_EVENT_TRIGGER_KEY |
| - name: "EventTrigger" |
| value: TEST_EVENT_TRIGGER_HARDWARE_FAULT_ALERT |
| |
| - label: |
| "Step 19: TH waits for a report of HardwareFaultAlert attribute from |
| DUT with a timeout of 300 seconds" |
| PICS: PICS_SKIP_SAMPLE_APP && SMOKECO.S.A0006 |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| verification: | |
| ./chip-tool smokecoalarm read hardware-fault-alert 1 1 |
| |
| [TOO] Endpoint: 1 Cluster: 0x0000_005C Attribute 0x0000_0006 DataVersion: 1795725838 |
| [TOO] HardwareFaultAlert: TRUE |
| [1692341722.458322][1923:1925] CHIP:EM: <<< [E:13580i S:23647 M:42886390 (Ack:222437492)] (S) Msg TX to 1:0000000000000001 [3304] --- Type 0000:10 (SecureChannel:StandaloneAck) |
| arguments: |
| values: |
| - name: "message" |
| value: "Enter 'y' after success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: "Step 20: TH reads ExpressedState attribute from DUT" |
| PICS: SMOKECO.S.A0000 |
| command: "readAttribute" |
| attribute: "ExpressedState" |
| response: |
| value: 5 |
| constraints: |
| type: enum8 |
| |
| - label: "Step 21: TH reads HardwareFault event from DUT" |
| PICS: SMOKECO.S.E03 |
| command: "readEvent" |
| event: "HardwareFault" |
| eventNumber: "LastReceivedEventNumber + 1" |
| response: |
| value: {} |
| |
| - label: |
| "Step 22: TH sends TestEventTrigger command to General Diagnostics |
| Cluster on Endpoint 0 with EnableKey field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER_KEY and EventTrigger field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER for Hardware Fault Alert Test Event |
| Clear" |
| PICS: DGGEN.S.C00.Rsp |
| cluster: "General Diagnostics" |
| endpoint: 0 |
| command: "TestEventTrigger" |
| arguments: |
| values: |
| - name: "EnableKey" |
| value: TEST_EVENT_TRIGGER_KEY |
| - name: "EventTrigger" |
| value: TEST_EVENT_TRIGGER_HARDWARE_FAULT_ALERT_CLEAR |
| |
| - label: |
| "Step 23: TH waits for a report of HardwareFaultAlert attribute from |
| DUT with a timeout of 300 seconds" |
| PICS: PICS_SKIP_SAMPLE_APP && SMOKECO.S.A0006 |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| verification: | |
| ./chip-tool smokecoalarm read hardware-fault-alert 1 1 |
| |
| [TOO] Endpoint: 1 Cluster: 0x0000_005C Attribute 0x0000_0006 DataVersion: 1795725838 |
| [TOO] HardwareFaultAlert: FALSE |
| [1692341722.458322][1923:1925] CHIP:EM: <<< [E:13580i S:23647 M:42886390 (Ack:222437492)] (S) Msg TX to 1:0000000000000001 [3304] --- Type 0000:10 (SecureChannel:StandaloneAck) |
| arguments: |
| values: |
| - name: "message" |
| value: "Enter 'y' after success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: "Step 24: TH reads ExpressedState attribute from DUT" |
| PICS: SMOKECO.S.A0000 |
| command: "readAttribute" |
| attribute: "ExpressedState" |
| response: |
| value: 0 |
| constraints: |
| type: enum8 |
| |
| - label: "Step 25: TH reads AllClear event from DUT" |
| PICS: SMOKECO.S.E0a |
| command: "readEvent" |
| event: "AllClear" |
| eventNumber: "LastReceivedEventNumber + 1" |
| response: |
| value: {} |
| |
| - label: "Step 26: TH subscribes to EndOfServiceAlert attribute from DUT" |
| PICS: SMOKECO.S.A0007 |
| command: "subscribeAttribute" |
| attribute: "EndOfServiceAlert" |
| minInterval: 1 |
| maxInterval: 900 |
| response: |
| value: 0 |
| constraints: |
| type: enum8 |
| |
| - label: |
| "Step 27: TH sends TestEventTrigger command to General Diagnostics |
| Cluster on Endpoint 0 with EnableKey field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER_KEY and EventTrigger field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER for End of Service Alert Test Event" |
| PICS: DGGEN.S.C00.Rsp |
| cluster: "General Diagnostics" |
| endpoint: 0 |
| command: "TestEventTrigger" |
| arguments: |
| values: |
| - name: "EnableKey" |
| value: TEST_EVENT_TRIGGER_KEY |
| - name: "EventTrigger" |
| value: TEST_EVENT_TRIGGER_END_OF_SERVICE_ALERT |
| |
| - label: |
| "Step 28: TH waits for a report of EndOfServiceAlert attribute from |
| DUT with a timeout of 300 seconds" |
| PICS: PICS_SKIP_SAMPLE_APP && SMOKECO.S.A0007 |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| verification: | |
| ./chip-tool smokecoalarm read end-of-service-alert 1 1 |
| |
| [TOO] Endpoint: 1 Cluster: 0x0000_005C Attribute 0x0000_0007 DataVersion: 1795725838 |
| [TOO] EndOfServiceAlert: 1 |
| [1692342076.348701][1956:1958] CHIP:EM: <<< [E:51164i S:58720 M:186716445 (Ack:135114063)] (S) Msg TX to 1:0000000000000001 [3304] --- Type 0000:10 (SecureChannel:StandaloneAck) |
| arguments: |
| values: |
| - name: "message" |
| value: "Enter 'y' after success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: "Step 29: TH reads ExpressedState attribute from DUT" |
| PICS: SMOKECO.S.A0000 |
| command: "readAttribute" |
| attribute: "ExpressedState" |
| response: |
| value: 6 |
| constraints: |
| type: enum8 |
| |
| - label: "Step 30: TH reads EndOfService event from DUT" |
| PICS: SMOKECO.S.E04 |
| command: "readEvent" |
| event: "EndOfService" |
| eventNumber: "LastReceivedEventNumber + 1" |
| response: |
| value: {} |
| |
| - label: |
| "Step 31: TH sends TestEventTrigger command to General Diagnostics |
| Cluster on Endpoint 0 with EnableKey field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER_KEY and EventTrigger field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER for End of Service Alert Test Event |
| Clear" |
| PICS: DGGEN.S.C00.Rsp |
| cluster: "General Diagnostics" |
| endpoint: 0 |
| command: "TestEventTrigger" |
| arguments: |
| values: |
| - name: "EnableKey" |
| value: TEST_EVENT_TRIGGER_KEY |
| - name: "EventTrigger" |
| value: TEST_EVENT_TRIGGER_END_OF_SERVICE_ALERT_CLEAR |
| |
| - label: |
| "Step 32: TH waits for a report of EndOfServiceAlert attribute from |
| DUT with a timeout of 300 seconds" |
| PICS: PICS_SKIP_SAMPLE_APP && SMOKECO.S.A0007 |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| verification: | |
| ./chip-tool smokecoalarm read end-of-service-alert 1 1 |
| |
| [TOO] Endpoint: 1 Cluster: 0x0000_005C Attribute 0x0000_0007 DataVersion: 1795725838 |
| [TOO] EndOfServiceAlert: 0 |
| [1692342076.348701][1956:1958] CHIP:EM: <<< [E:51164i S:58720 M:186716445 (Ack:135114063)] (S) Msg TX to 1:0000000000000001 [3304] --- Type 0000:10 (SecureChannel:StandaloneAck) |
| arguments: |
| values: |
| - name: "message" |
| value: "Enter 'y' after success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: "Step 33: TH reads ExpressedState attribute from DUT" |
| PICS: SMOKECO.S.A0000 |
| command: "readAttribute" |
| attribute: "ExpressedState" |
| response: |
| value: 0 |
| constraints: |
| type: enum8 |
| |
| - label: "Step 34: TH reads AllClear event from DUT" |
| PICS: SMOKECO.S.E0a |
| command: "readEvent" |
| event: "AllClear" |
| eventNumber: "LastReceivedEventNumber + 1" |
| response: |
| value: {} |
| |
| - label: "Step 35: TH subscribes to TestInProgress attribute from DUT" |
| PICS: SMOKECO.S.A0005 |
| command: "subscribeAttribute" |
| attribute: "TestInProgress" |
| minInterval: 1 |
| maxInterval: 900 |
| response: |
| value: 0 |
| constraints: |
| type: boolean |
| |
| - label: "Step 36: TH reads ExpressedState attribute from DUT" |
| PICS: SMOKECO.S.A0000 |
| command: "readAttribute" |
| attribute: "ExpressedState" |
| response: |
| value: 0 |
| constraints: |
| type: enum8 |
| |
| - label: |
| "Step 37: At the start of the next step, please manually initiate the |
| DUT self-test" |
| cluster: "LogCommands" |
| PICS: PICS_USER_PROMPT && SMOKECO.M.ManuallyControlledTest |
| command: "UserPrompt" |
| arguments: |
| values: |
| - name: "message" |
| value: "Please enter 'y' for success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: |
| "Step 38: TH waits for a report of TestInProgress attribute from DUT |
| with a timeout of 180 seconds" |
| PICS: SMOKECO.S.A0005 && SMOKECO.M.ManuallyControlledTest |
| command: "waitForReport" |
| attribute: "TestInProgress" |
| timeout: 180 |
| response: |
| value: 1 |
| constraints: |
| type: boolean |
| |
| - label: "Step 39: TH reads ExpressedState attribute from DUT" |
| PICS: SMOKECO.S.A0000 && SMOKECO.M.ManuallyControlledTest |
| command: "readAttribute" |
| attribute: "ExpressedState" |
| response: |
| value: 4 |
| constraints: |
| type: enum8 |
| |
| - label: |
| "Step 40: TH waits for a report of TestInProgress attribute from DUT |
| with a timeout of 180 seconds" |
| PICS: SMOKECO.S.A0005 && SMOKECO.M.ManuallyControlledTest |
| command: "waitForReport" |
| attribute: "TestInProgress" |
| timeout: 180 |
| response: |
| value: 0 |
| constraints: |
| type: boolean |
| |
| - label: "Step 41: TH reads SelfTestComplete event from DUT" |
| PICS: SMOKECO.S.E05 && SMOKECO.M.ManuallyControlledTest |
| command: "readEvent" |
| event: "SelfTestComplete" |
| eventNumber: "LastReceivedEventNumber + 1" |
| response: |
| value: {} |
| |
| - label: "Step 42: TH reads ExpressedState attribute from DUT" |
| PICS: SMOKECO.S.A0000 && SMOKECO.M.ManuallyControlledTest |
| command: "readAttribute" |
| attribute: "ExpressedState" |
| response: |
| value: 0 |
| constraints: |
| type: enum8 |
| |
| - label: "Step 43: TH reads AllClear event from DUT" |
| PICS: SMOKECO.S.E0a && SMOKECO.M.ManuallyControlledTest |
| command: "readEvent" |
| event: "AllClear" |
| eventNumber: "LastReceivedEventNumber + 1" |
| response: |
| value: {} |
| |
| - label: "Step 44: TH sends SelfTestRequest command to DUT" |
| PICS: SMOKECO.S.C00.Rsp |
| command: "SelfTestRequest" |
| |
| - label: |
| "Step 45: TH waits for a report of TestInProgress attribute from DUT |
| with a timeout of 180 seconds" |
| PICS: PICS_SKIP_SAMPLE_APP && SMOKECO.S.A0005 |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| verification: | |
| ./chip-tool smokecoalarm read test-in-progress 1 1 |
| |
| This step needs to be completed quickly |
| |
| [TOO] Endpoint: 1 Cluster: 0x0000_005C Attribute 0x0000_0005 DataVersion: 1795725838 |
| [TOO] TestInProgress: TRUE |
| [1690268959.715817][13732:13734] CHIP:EM: <<< [E:12324i S:6365 M:86298174 (Ack:6158737)] (S) Msg TX to 1:0000000000000001 [D1BB] --- Type 0000:10 (SecureChannel:StandaloneAck) |
| arguments: |
| values: |
| - name: "message" |
| value: "Enter 'y' after success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: "Step 46: TH reads ExpressedState attribute from DUT" |
| PICS: SMOKECO.S.A0000 |
| command: "readAttribute" |
| attribute: "ExpressedState" |
| response: |
| value: 4 |
| constraints: |
| type: enum8 |
| |
| - label: "Step 47a: TH subscribes to TestInProgress attribute from DUT" |
| PICS: SMOKECO.S.A0005 |
| command: "subscribeAttribute" |
| attribute: "TestInProgress" |
| minInterval: 1 |
| maxInterval: 900 |
| |
| - label: |
| "Step 47b: TH waits for a report of TestInProgress attribute from DUT |
| with a timeout of 180 seconds" |
| PICS: SMOKECO.S.A0005 |
| command: "waitForReport" |
| attribute: "TestInProgress" |
| timeout: 180 |
| response: |
| value: 0 |
| constraints: |
| type: boolean |
| |
| - label: "Step 48: TH reads SelfTestComplete event from DUT" |
| PICS: SMOKECO.S.E05 |
| command: "readEvent" |
| event: "SelfTestComplete" |
| eventNumber: "LastReceivedEventNumber + 1" |
| response: |
| value: {} |
| |
| - label: "Step 49: TH reads ExpressedState attribute from DUT" |
| PICS: SMOKECO.S.A0000 |
| command: "readAttribute" |
| attribute: "ExpressedState" |
| response: |
| value: 0 |
| constraints: |
| type: enum8 |
| |
| - label: "Step 50: TH reads AllClear event from DUT" |
| PICS: SMOKECO.S.E0a |
| command: "readEvent" |
| event: "AllClear" |
| eventNumber: "LastReceivedEventNumber + 1" |
| response: |
| value: {} |