/*
 *
 *    Copyright (c) 2022 Project CHIP Authors
 *    Copyright (c) 2020 Texas Instruments Incorporated
 *
 *    Licensed under the Apache License, Version 2.0 (the "License");
 *    you may not use this file except in compliance with the License.
 *    You may obtain a copy of the License at
 *
 *        http://www.apache.org/licenses/LICENSE-2.0
 *
 *    Unless required by applicable law or agreed to in writing, software
 *    distributed under the License is distributed on an "AS IS" BASIS,
 *    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 *    See the License for the specific language governing permissions and
 *    limitations under the License.
 */

/**
 * @file
 * Linkerscript for Matter executable with space reserved for the TI BIM.
 */

STACKSIZE = 0x800;
RESERVED_RAM_SIZE_BLE_ROM = 0x00000FDF;


MEMORY
{
    /* last page removed for BIM, CCFG is supplied by that project */
    /* FLASH (RX)      : ORIGIN = 0x00000000, LENGTH = 0x000affa8 */
    /* FLASH_CCFG (RX) : ORIGIN = 0x000affa8, LENGTH = 0x00000058 */
    FLASH (RX)      : ORIGIN = 0x00000000, LENGTH = 0x000ae000
    /* BLE ROM reserves RAM at the beginning of the ram image, size RESERVED_RAM_SIZE_BLE_ROM */
    /* SRAM (RWX)      : ORIGIN = 0x20000000, LENGTH = 0x00024000 */
    SRAM (RWX)      : ORIGIN = 0x20000FDF, LENGTH = 0x00023021
    GPRAM (RWX)     : ORIGIN = 0x11000000, LENGTH = 0x00002000
    /* Explicitly placed off target for the storage of logging data.
     * The data placed here is NOT loaded onto the target device.
     * This is part of 1 GB of external memory from 0x60000000 - 0x9FFFFFFF.
     * ARM memory map can be found here:
     * https://developer.arm.com/documentation/ddi0337/e/memory-map/about-the-memory-map
     */
    LOG_DATA (R) : ORIGIN = 0x90000000, LENGTH = 0x40000
}

REGION_ALIAS("REGION_TEXT", FLASH);
REGION_ALIAS("REGION_BSS", SRAM);
REGION_ALIAS("REGION_DATA", SRAM);
REGION_ALIAS("REGION_STACK", SRAM);
REGION_ALIAS("REGION_HEAP", SRAM);
REGION_ALIAS("REGION_LOG", LOG_DATA);
REGION_ALIAS("REGION_ARM_EXIDX", FLASH);
REGION_ALIAS("REGION_ARM_EXTAB", FLASH);

SECTIONS {
    /* BIM header placed at the base of flash by default */
    PROVIDE (_img_header_base_address =
        DEFINED(_img_header_base_address) ? _img_header_base_address : 0x0);
 
    .oad_image_header (_img_header_base_address) : AT (_img_header_base_address) {
        KEEP (*(.oad_image_header))
    } > REGION_TEXT

    /* interrupt vectors shifted to accomodate BIM header */
    PROVIDE (_intvecs_base_address =
        DEFINED(_intvecs_base_address) ? _intvecs_base_address : 0x100);

    .resetVecs (_intvecs_base_address) : AT (_intvecs_base_address) {
        KEEP (*(.resetVecs))
    } > REGION_TEXT

    PROVIDE (_vtable_base_address =
        DEFINED(_vtable_base_address) ? _vtable_base_address : 0x20000000 + RESERVED_RAM_SIZE_BLE_ROM);

    .ramVecs (_vtable_base_address) (NOLOAD) : {
        KEEP (*(.ramVecs))
    } > REGION_DATA

    /*
     * UDMACC26XX_CONFIG_BASE below must match UDMACC26XX_CONFIG_BASE defined
     * by ti/drivers/dma/UDMACC26XX.h
     * The user is allowed to change UDMACC26XX_CONFIG_BASE to move it away from
     * the default address 0x2000_1800, but remember it must be 1024 bytes aligned.
     */
    UDMACC26XX_CONFIG_BASE = 0x20001800;

    /*
     * Define absolute addresses for the DMA channels.
     * DMA channels must always be allocated at a fixed offset from the DMA base address.
     * --------- DO NOT MODIFY -----------
     */
    DMA_UART0_RX_CONTROL_TABLE_ENTRY_ADDRESS  = (UDMACC26XX_CONFIG_BASE + 0x10);
    DMA_UART0_TX_CONTROL_TABLE_ENTRY_ADDRESS  = (UDMACC26XX_CONFIG_BASE + 0x20);
    DMA_SPI0_RX_CONTROL_TABLE_ENTRY_ADDRESS   = (UDMACC26XX_CONFIG_BASE + 0x30);
    DMA_SPI0_TX_CONTROL_TABLE_ENTRY_ADDRESS   = (UDMACC26XX_CONFIG_BASE + 0x40);
    DMA_UART1_RX_CONTROL_TABLE_ENTRY_ADDRESS  = (UDMACC26XX_CONFIG_BASE + 0x50);
    DMA_UART1_TX_CONTROL_TABLE_ENTRY_ADDRESS  = (UDMACC26XX_CONFIG_BASE + 0x60);
    DMA_ADC_PRI_CONTROL_TABLE_ENTRY_ADDRESS   = (UDMACC26XX_CONFIG_BASE + 0x70);
    DMA_GPT0A_PRI_CONTROL_TABLE_ENTRY_ADDRESS = (UDMACC26XX_CONFIG_BASE + 0x90);
    DMA_SPI1_RX_CONTROL_TABLE_ENTRY_ADDRESS   = (UDMACC26XX_CONFIG_BASE + 0x100);
    DMA_SPI1_TX_CONTROL_TABLE_ENTRY_ADDRESS   = (UDMACC26XX_CONFIG_BASE + 0x110);

    DMA_UART0_RX_ALT_CONTROL_TABLE_ENTRY_ADDRESS = (UDMACC26XX_CONFIG_BASE + 0x210);
    DMA_UART0_TX_ALT_CONTROL_TABLE_ENTRY_ADDRESS = (UDMACC26XX_CONFIG_BASE + 0x220);
    DMA_SPI0_RX_ALT_CONTROL_TABLE_ENTRY_ADDRESS  = (UDMACC26XX_CONFIG_BASE + 0x230);
    DMA_SPI0_TX_ALT_CONTROL_TABLE_ENTRY_ADDRESS  = (UDMACC26XX_CONFIG_BASE + 0x240);
    DMA_UART1_RX_ALT_CONTROL_TABLE_ENTRY_ADDRESS = (UDMACC26XX_CONFIG_BASE + 0x250);
    DMA_UART1_TX_ALT_CONTROL_TABLE_ENTRY_ADDRESS = (UDMACC26XX_CONFIG_BASE + 0x260);
    DMA_ADC_ALT_CONTROL_TABLE_ENTRY_ADDRESS      = (UDMACC26XX_CONFIG_BASE + 0x270);
    DMA_GPT0A_ALT_CONTROL_TABLE_ENTRY_ADDRESS    = (UDMACC26XX_CONFIG_BASE + 0x290);
    DMA_SPI1_RX_ALT_CONTROL_TABLE_ENTRY_ADDRESS  = (UDMACC26XX_CONFIG_BASE + 0x300);
    DMA_SPI1_TX_ALT_CONTROL_TABLE_ENTRY_ADDRESS  = (UDMACC26XX_CONFIG_BASE + 0x310);

    /*
     * Allocate UART0, UART1, SPI0, SPI1, ADC, and GPTimer0 DMA descriptors at absolute addresses.
     * --------- DO NOT MODIFY -----------
     */
    UDMACC26XX_uart0RxControlTableEntry_is_placed = 0;
    .dmaUart0RxControlTableEntry DMA_UART0_RX_CONTROL_TABLE_ENTRY_ADDRESS (NOLOAD) : AT (DMA_UART0_RX_CONTROL_TABLE_ENTRY_ADDRESS) {*(.dmaUart0RxControlTableEntry)} > REGION_DATA

    UDMACC26XX_uart0TxControlTableEntry_is_placed = 0;
    .dmaUart0TxControlTableEntry DMA_UART0_TX_CONTROL_TABLE_ENTRY_ADDRESS (NOLOAD) : AT (DMA_UART0_TX_CONTROL_TABLE_ENTRY_ADDRESS) {*(.dmaUart0TxControlTableEntry)} > REGION_DATA

    UDMACC26XX_dmaSpi0RxControlTableEntry_is_placed = 0;
    .dmaSpi0RxControlTableEntry DMA_SPI0_RX_CONTROL_TABLE_ENTRY_ADDRESS (NOLOAD) : AT (DMA_SPI0_RX_CONTROL_TABLE_ENTRY_ADDRESS) {*(.dmaSpi0RxControlTableEntry)} > REGION_DATA

    UDMACC26XX_dmaSpi0TxControlTableEntry_is_placed = 0;
    .dmaSpi0TxControlTableEntry DMA_SPI0_TX_CONTROL_TABLE_ENTRY_ADDRESS (NOLOAD) : AT (DMA_SPI0_TX_CONTROL_TABLE_ENTRY_ADDRESS) {*(.dmaSpi0TxControlTableEntry)} > REGION_DATA

    UDMACC26XX_uart1RxControlTableEntry_is_placed = 0;
    .dmaUart1RxControlTableEntry DMA_UART1_RX_CONTROL_TABLE_ENTRY_ADDRESS (NOLOAD) : AT (DMA_UART1_RX_CONTROL_TABLE_ENTRY_ADDRESS) {*(.dmaUart1RxControlTableEntry)} > REGION_DATA

    UDMACC26XX_uart1TxControlTableEntry_is_placed = 0;
    .dmaUart1TxControlTableEntry DMA_UART1_TX_CONTROL_TABLE_ENTRY_ADDRESS (NOLOAD) : AT (DMA_UART1_TX_CONTROL_TABLE_ENTRY_ADDRESS) {*(.dmaUart1TxControlTableEntry)} > REGION_DATA

    UDMACC26XX_dmaADCPriControlTableEntry_is_placed = 0;
    .dmaADCPriControlTableEntry DMA_ADC_PRI_CONTROL_TABLE_ENTRY_ADDRESS (NOLOAD) : AT (DMA_ADC_PRI_CONTROL_TABLE_ENTRY_ADDRESS) {*(.dmaADCPriControlTableEntry)} > REGION_DATA

    UDMACC26XX_dmaGPT0APriControlTableEntry_is_placed = 0;
    .dmaGPT0APriControlTableEntry DMA_GPT0A_PRI_CONTROL_TABLE_ENTRY_ADDRESS (NOLOAD) : AT (DMA_GPT0A_PRI_CONTROL_TABLE_ENTRY_ADDRESS) {*(.dmaGPT0APriControlTableEntry)} > REGION_DATA

    UDMACC26XX_dmaSpi1RxControlTableEntry_is_placed = 0;
    .dmaSpi1RxControlTableEntry DMA_SPI1_RX_CONTROL_TABLE_ENTRY_ADDRESS (NOLOAD) : AT (DMA_SPI1_RX_CONTROL_TABLE_ENTRY_ADDRESS) {*(.dmaSpi1RxControlTableEntry)} > REGION_DATA

    UDMACC26XX_dmaSpi1TxControlTableEntry_is_placed = 0;
    .dmaSpi1TxControlTableEntry DMA_SPI1_TX_CONTROL_TABLE_ENTRY_ADDRESS (NOLOAD) : AT (DMA_SPI1_TX_CONTROL_TABLE_ENTRY_ADDRESS) {*(.dmaSpi1TxControlTableEntry)} > REGION_DATA

    UDMACC26XX_uart0RxAltControlTableEntry_is_placed = 0;
    .dmaUart0RxAltControlTableEntry DMA_UART0_RX_ALT_CONTROL_TABLE_ENTRY_ADDRESS (NOLOAD) : AT (DMA_UART0_RX_ALT_CONTROL_TABLE_ENTRY_ADDRESS) {*(.dmaUart0RxAltControlTableEntry)} > REGION_DATA

    UDMACC26XX_uart0TxAltControlTableEntry_is_placed = 0;
    .dmaUart0TxAltControlTableEntry DMA_UART0_TX_ALT_CONTROL_TABLE_ENTRY_ADDRESS (NOLOAD) : AT (DMA_UART0_TX_ALT_CONTROL_TABLE_ENTRY_ADDRESS) {*(.dmaUart0TxAltControlTableEntry)} > REGION_DATA

    UDMACC26XX_dmaSpi0RxAltControlTableEntry_is_placed = 0;
    .dmaSpi0RxAltControlTableEntry DMA_SPI0_RX_ALT_CONTROL_TABLE_ENTRY_ADDRESS (NOLOAD) : AT (DMA_SPI0_RX_ALT_CONTROL_TABLE_ENTRY_ADDRESS) {*(.dmaSpi0RxAltControlTableEntry)} > REGION_DATA

    UDMACC26XX_dmaSpi0TxAltControlTableEntry_is_placed = 0;
    .dmaSpi0TxAltControlTableEntry DMA_SPI0_TX_ALT_CONTROL_TABLE_ENTRY_ADDRESS (NOLOAD) : AT (DMA_SPI0_TX_ALT_CONTROL_TABLE_ENTRY_ADDRESS) {*(.dmaSpi0TxAltControlTableEntry)} > REGION_DATA

    UDMACC26XX_uart1RxAltControlTableEntry_is_placed = 0;
    .dmaUart1RxAltControlTableEntry DMA_UART1_RX_ALT_CONTROL_TABLE_ENTRY_ADDRESS (NOLOAD) : AT (DMA_UART1_RX_ALT_CONTROL_TABLE_ENTRY_ADDRESS) {*(.dmaUart1RxAltControlTableEntry)} > REGION_DATA

    UDMACC26XX_uart1TxAltControlTableEntry_is_placed = 0;
    .dmaUart1TxAltControlTableEntry DMA_UART1_TX_ALT_CONTROL_TABLE_ENTRY_ADDRESS (NOLOAD) : AT (DMA_UART1_TX_ALT_CONTROL_TABLE_ENTRY_ADDRESS) {*(.dmaUart1TxAltControlTableEntry)} > REGION_DATA

    UDMACC26XX_dmaADCAltControlTableEntry_is_placed = 0;
    .dmaADCAltControlTableEntry DMA_ADC_ALT_CONTROL_TABLE_ENTRY_ADDRESS (NOLOAD) : AT (DMA_ADC_ALT_CONTROL_TABLE_ENTRY_ADDRESS) {*(.dmaADCAltControlTableEntry)} > REGION_DATA

    UDMACC26XX_dmaGPT0AAltControlTableEntry_is_placed = 0;
    .dmaGPT0AAltControlTableEntry DMA_GPT0A_ALT_CONTROL_TABLE_ENTRY_ADDRESS (NOLOAD) : AT (DMA_GPT0A_ALT_CONTROL_TABLE_ENTRY_ADDRESS) {*(.dmaGPT0AAltControlTableEntry)} > REGION_DATA

    UDMACC26XX_dmaSpi1RxAltControlTableEntry_is_placed = 0;
    .dmaSpi1RxAltControlTableEntry DMA_SPI1_RX_ALT_CONTROL_TABLE_ENTRY_ADDRESS (NOLOAD) : AT (DMA_SPI1_RX_ALT_CONTROL_TABLE_ENTRY_ADDRESS) {*(.dmaSpi1RxAltControlTableEntry)} > REGION_DATA

    UDMACC26XX_dmaSpi1TxAltControlTableEntry_is_placed = 0;
    .dmaSpi1TxAltControlTableEntry DMA_SPI1_TX_ALT_CONTROL_TABLE_ENTRY_ADDRESS (NOLOAD) : AT (DMA_SPI1_TX_ALT_CONTROL_TABLE_ENTRY_ADDRESS) {*(.dmaSpi1TxAltControlTableEntry)} > REGION_DATA


    /* if a ROM-only symbol is present, then ROM is being used.
     * Reserve memory for surgically placed config constants.
     */
    _rom_rodata_start = 0x2000;
    _rom_rodata_size = DEFINED(ROM_RODATA_SIZE) ? 0 : DEFINED(ROM_RODATA_SIZE_NO_OAD) ? 0x330 : 0;

    .rom_rodata_reserve (_rom_rodata_start): {
        . += _rom_rodata_size;
    } > REGION_TEXT AT> REGION_TEXT

    .text : {
        CREATE_OBJECT_SYMBOLS
        *(.text)
        *(.text.*)
        . = ALIGN(0x4);
        KEEP (*(.ctors))
        . = ALIGN(0x4);
        KEEP (*(.dtors))
        . = ALIGN(0x4);
        __init_array_start = .;
        KEEP (*(.init_array*))
        __init_array_end = .;
        *(.init)
        *(.fini*)
    } > REGION_TEXT AT> REGION_TEXT

    PROVIDE (__etext = .);
    PROVIDE (_etext = .);
    PROVIDE (etext = .);

    .rodata : {
        *(.rodata)
        *(.rodata.*)
        *(.rodata_*)
    } > REGION_TEXT AT> REGION_TEXT

    .data : ALIGN(4) {
        __data_load__ = LOADADDR (.data);
        __data_start__ = .;
        *(.data)
        *(.data.*)
        . = ALIGN (4);
        __data_end__ = .;
    } > REGION_DATA AT> REGION_TEXT

    .ARM.exidx : {
        __exidx_start = .;
        *(.ARM.exidx* .gnu.linkonce.armexidx.*)
        __exidx_end = .;
    } > REGION_ARM_EXIDX AT> REGION_ARM_EXIDX

    .ARM.extab : {
        *(.ARM.extab* .gnu.linkonce.armextab.*)
    } > REGION_ARM_EXTAB AT> REGION_ARM_EXTAB

    /* End of executable code/data, NVS is not part of the OTA image */
    PROVIDE (_flash_end_address = .);

    .nvs (0xAA000) (NOLOAD) : AT (0xAA000) ALIGN(0x2000) {
        *(.nvs)
    } > REGION_TEXT

    /* CCFG is supplied by the BIM project */
    /*
    .ccfg : {
        KEEP (*(.ccfg))
    } > FLASH_CCFG AT> FLASH_CCFG
    */

    .bss : {
        __bss_start__ = .;
        *(.shbss)
        *(.bss)
        *(.bss.*)
        *(COMMON)
        . = ALIGN (4);
        __bss_end__ = .;
    } > REGION_BSS AT> REGION_BSS

    .heap : {
        __heap_start__ = .;
        end = __heap_start__;
        _end = end;
        __end = end;
        KEEP(*(.heap))
        __heap_end__ = .;
        __HeapLimit = __heap_end__;
    } > REGION_HEAP AT> REGION_HEAP

    .stack (NOLOAD) : ALIGN(0x8) {
        _stack = .;
        __stack = .;
        KEEP(*(.stack))
        . += STACKSIZE;
        _stack_end = .;
        __stack_end = .;
    } > REGION_STACK AT> REGION_STACK

    .log_data (COPY) : {
        KEEP (*(.log_data))
    } > REGION_LOG
}

ENTRY(resetISR)