Setup ESP-IDF and Matter Environment

Setting up IDF and Matter environment is one time setup.

Setup ESP-IDF (Espressif IoT Development Framework)

Building the example application requires the use of the ESP-IDF and the xtensa-esp32-elf toolchain for ESP32 modules or the riscv-esp32-elf toolchain for ESP32C3 modules.

The VSCode devcontainer has these components pre-installed, so you can skip this step.

Install Prerequisites

• Linux
• macOS

Get IDF v5.1.1

• Clone ESP-IDF [v5.1.1 release](https://github.com/espressif/esp-idf/releases/tag/v5.1.1

  git clone -b v5.1.1 --recursive --depth 1 --shallow-submodule https://github.com/espressif/esp-idf.git
  cd esp-idf
  ./install.sh
  

• To update an existing esp-idf toolchain to v5.1.1:

  cd path/to/esp-idf
  git fetch --depth 1 origin v5.1.1
  git reset --hard FETCH_HEAD
  git submodule update --depth 1 --recursive --init
  
  # -ff is for cleaning untracked files as well as submodules
  git clean -ffdx
  ./install.sh
  

Setup Matter environment

Install Prerequisites

• Linux
• macOS

Bootstrap Matter environment

Execute the below command to bootstrap Matter environment. This script takes care of downloading GN, ninja, and setting up a Python environment with libraries used to build and test.

source scripts/bootstrap.sh

Whenever Matter environment is out of date, it can be updated by running above command.

In IDF v4.4.x, esptool is part of the esp-idf repository, but in IDF v5.x, it is moved out as a Python package which can be installed using pip.

If you are using IDF v5.x or later, please install esptool using the command below:

# Please make sure to run this command in the Matter Python environment
python3 -m pip install esptool

---

Once IDF and Matter environment is set up, head over to application building and commissioning guide.