# Copyright (c) 2021 Project CHIP Authors
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

name:
    Window Covering [TC-WNCV-4.3] GoToLiftPercentage Limits Verification with
    server as DUT

config:
    nodeId: 0x12344321
    cluster: "Window Covering"
    endpoint: 1

tests:
    - label: "0: Wait for the commissioned device to be retrieved"
      cluster: "DelayCommands"
      command: "WaitForCommissionee"
      arguments:
          values:
              - name: "nodeId"
                value: nodeId

    ### CONDITIONAL LIFT Tests from FeatureMap
    ######## Check attribute coherence #######
    ### Step 1x -> Verify the Lift Percent100ths and Percent attributes
    ### Shall be tested as equals CurrentPositionLiftPercent100ths
    - label:
          "1a: If (PA_LF & LF) TH reads CurrentPositionLiftPercent100ths from
          DUT"
      command: "readAttribute"
      attribute: "CurrentPositionLiftPercent100ths"
      PICS: WNCV.S.F00 && WNCV.S.F02 && WNCV.S.A000e
      response:
          saveAs: attrCurrentPositionLiftPercent100ths
          constraints:
              minValue: 0
              maxValue: 10000

    - label:
          "1b 1c: If (PA_LF & LF) TH reads CurrentPositionLiftPercentage from
          DUT + assert CurrentPositionLiftPercent100ths/100 equals
          CurrentPositionLiftPercentage"
      command: "readAttribute"
      attribute: "CurrentPositionLiftPercentage"
      PICS: WNCV.S.F00 && WNCV.S.F02 && WNCV.S.A0008 && WNCV.S.A000e
      response:
          value: attrCurrentPositionLiftPercent100ths / 100
          constraints:
              minValue: 0
              maxValue: 100

    ######## Command BadParams 1 #######
    ### Step 2x -> Verify the GoToLiftPercentage with a BadParam

    # - label: "2a: TH Generate a random badParam"
    # since we don't know how to generate a random bad param
    # we use a default badParam for this test

    - label: "2b: TH sends GoToLiftPercentage command with BadParam to DUT"
      command: "GoToLiftPercentage"
      PICS: WNCV.S.F00 && WNCV.S.F02 || WNCV.S.F00 && WNCV.S.C05.Rsp
      arguments:
          values:
              - name: "LiftPercent100thsValue"
                value: 0x3000
              - name: "LiftPercentageValue"
                value: 0x3F
      response:
          error: CONSTRAINT_ERROR

    ######## Command BadParams 2 ######
    ### Step 3x -> Verify the GoToLiftPercentage with 10001 as param
    - label: "3a: TH sends GoToLiftPercentage command with 10001 to DUT"
      command: "GoToLiftPercentage"
      PICS: WNCV.S.F00 && WNCV.S.F02 || WNCV.S.F00 && WNCV.S.C05.Rsp
      arguments:
          values:
              - name: "LiftPercent100thsValue"
                value: 10001
              - name: "LiftPercentageValue"
                value: 100
      response:
          error: CONSTRAINT_ERROR

    ######## Command BadParams 3 ######
    ### Step 4x -> Verify the GoToLiftPercentage with 0xFFFF as param
    - label: "4a: TH sends GoToLiftPercentage command with 0xFFFF to DUT"
      command: "GoToLiftPercentage"
      PICS: WNCV.S.F00 && WNCV.S.F02 || WNCV.S.F00 && WNCV.S.C05.Rsp
      arguments:
          values:
              - name: "LiftPercent100thsValue"
                value: 0xFFFF
              - name: "LiftPercentageValue"
                value: 0xFF
      response:
          error: CONSTRAINT_ERROR